phy1 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. I get this error fairly regularly (about once per day or two) and the wireless stops working after that. Work-around is suspending the laptop (EeePC 1000) and waking it again - after that the rt2800pci driver seems to get into working state again. dmesg output: ----------------------------- Linux version 3.2.2-dirty (mzz@predator) (gcc version 4.6.1 20110604 (prerelease) (Debian 4.6.0-11) ) #10 SMP Sun Jan 29 19:51:18 EET 2012 KERNEL supported cpus: Intel GenuineIntel Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable) BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data) BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS) BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI present. DMI: ASUSTeK Computer INC. 1000/1000, BIOS 0803 08/01/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) last_pfn = 0x3f7a0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-DFFFF uncachable E0000-E3FFF write-protect E4000-EFFFF write-through F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask 0C0000000 write-back 1 base 03F800000 mask 0FF800000 uncachable 2 disabled 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled original variable MTRRs reg 0, base: 0GB, range: 1GB, type WB reg 1, base: 1016MB, range: 8MB, type UC total RAM covered: 1016M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 16M num_reg: 2 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 1GB, type WB reg 1, base: 1016MB, range: 8MB, type UC initial memory mapped : 0 - 00c00000 Base memory trampoline at [b009b000] 9b000 size 16384 init_memory_mapping: 0000000000000000-000000003f7a0000 0000000000 - 003f7a0000 page 4k kernel direct mapping tables up to 3f7a0000 @ aff000-c00000 ACPI: RSDP 000fbcd0 00014 (v00 ACPIAM) ACPI: RSDT 3f7a0000 0003C (v01 A_M_I_ OEMRSDT 08000801 MSFT 00000097) ACPI: FACP 3f7a0200 00084 (v02 A_M_I_ OEMFACP 08000801 MSFT 00000097) ACPI: DSDT 3f7a05b0 053AF (v01 P0018 P0018000 00000000 INTL 20051117) ACPI: FACS 3f7ae000 00040 ACPI: APIC 3f7a0390 0005C (v01 A_M_I_ OEMAPIC 08000801 MSFT 00000097) ACPI: MCFG 3f7a03f0 0003C (v01 A_M_I_ OEMMCFG 08000801 MSFT 00000097) ACPI: OEMB 3f7ae040 00061 (v01 A_M_I_ AMI_OEM 08000801 MSFT 00000097) ACPI: HPET 3f7a5960 00038 (v01 A_M_I_ OEMHPET 08000801 MSFT 00000097) ACPI: SSDT 3f7aeb80 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117) ACPI: Local APIC address 0xfee00000 1015MB LOWMEM available. mapped low ram: 0 - 3f7a0000 low ram: 0 - 3f7a0000 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x0003f7a0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0003f7a0 On node 0 totalpages: 259887 free_area_init_node: node 0, pgdat b05dcdc0, node_mem_map eefb0200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 2000 pages used for memmap Normal zone: 253904 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0xffffffff base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000) setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 11 pages/cpu @eef94000 s23360 r0 d21696 u45056 pcpu-alloc: s23360 r0 d21696 u45056 alloc=11*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257855 Kernel command line: auto BOOT_IMAGE=Linux ro root=802 quiet usbcore.autosuspend=1 enable_mtrr_cleanup rootfstype=ext4 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 Memory: 1024960k/1040000k available (2855k kernel code, 14588k reserved, 1119k data, 304k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB) vmalloc : 0xeffa0000 - 0xfff8d000 ( 255 MB) lowmem : 0xb0000000 - 0xef7a0000 (1015 MB) .init : 0xb05e2000 - 0xb062e000 ( 304 kB) .data : 0xb04c9f42 - 0xb05e1d00 (1119 kB) .text : 0xb0200000 - 0xb04c9f42 (2855 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. CONFIG_RCU_FANOUT set to non-default value of 4 RCU dyntick-idle grace-period acceleration is enabled. NR_IRQS:2304 nr_irqs:512 16 CPU 0 irqstacks, hard=ee802000 soft=ee804000 Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 1600.220 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.44 BogoMIPS (lpj=6400880) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 using mwait in idle threads. ACPI: Core revision 20110623 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02 Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. ... version: 3 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 CPU 1 irqstacks, hard=ee85e000 soft=ee860000 Booting Node 0, Processors #1 Ok. smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations Brought up 2 CPUs Total of 2 processors activated (6400.35 BogoMIPS). NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: SSDT 3f7ae180 0023C (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 0023C (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 3f7ae450 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) ACPI: SSDT 3f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117) ACPI: SSDT 3f7ae3c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117) ACPI: Interpreter enabled ACPI: (supports S0 S3 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A08:00: host bridge window [mem 0x3f800000-0xffffffff] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600 pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0xf7f00000-0xf7f7ffff] pci 0000:00:02.0: reg 14: [io 0xdc80-0xdc87] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] pci 0000:00:02.0: reg 1c: [mem 0xf7ec0000-0xf7efffff] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380 pci 0000:00:02.1: reg 10: [mem 0xf7f80000-0xf7ffffff] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xf7eb8000-0xf7ebbfff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604 pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604 pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 pci 0000:00:1d.0: reg 20: [io 0xd480-0xd49f] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 pci 0000:00:1d.1: reg 20: [io 0xd800-0xd81f] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 pci 0000:00:1d.2: reg 20: [io 0xd880-0xd89f] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 pci 0000:00:1d.3: reg 20: [io 0xdc00-0xdc1f] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 pci 0000:00:1d.7: reg 10: [mem 0xf7eb7c00-0xf7eb7fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601 pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0003) pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101 pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.2: reg 20: [io 0xffa0-0xffaf] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] pci 0000:00:1c.0: PCI bridge to [bus 05-05] pci 0000:04:00.0: [1969:1026] type 0 class 0x000200 pci 0000:04:00.0: reg 10: [mem 0xfbfc0000-0xfbffffff 64bit] pci 0000:04:00.0: reg 18: [io 0xec80-0xecff] pci 0000:04:00.0: PME# supported from D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.1: PCI bridge to [bus 04-04] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] pci 0000:00:1c.1: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:00:1c.2: PCI bridge to [bus 03-03] pci 0000:01:00.0: [1814:0781] type 0 class 0x000280 pci 0000:01:00.0: reg 10: [mem 0xfbef0000-0xfbefffff] pci 0000:01:00.0: PME# supported from D0 D3hot pci 0000:01:00.0: PME# disabled pci 0000:00:1c.3: PCI bridge to [bus 01-02] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xfbefffff] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x3f800000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19) ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000003f7a0000 - 000000003fffffff HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000d0000-0x000dffff window] pnp 00:00: [mem 0x3f800000-0xffffffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [mem 0xfed13000-0xfed19fff] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:02: [dma 4] pnp 00:02: [io 0x0000-0x000f] pnp 00:02: [io 0x0081-0x0083] pnp 00:02: [io 0x0087] pnp 00:02: [io 0x0089-0x008b] pnp 00:02: [io 0x008f] pnp 00:02: [io 0x00c0-0x00df] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:03: [io 0x0070-0x0071] pnp 00:03: [irq 8] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:04: [io 0x0060] pnp 00:04: [io 0x0064] pnp 00:04: [irq 1] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:05: [irq 12] pnp 00:05: Plug and Play ACPI device, IDs SYN0a04 SYN0a00 SYN0002 PNP0f13 (active) pnp 00:06: [io 0x0061] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:07: [io 0x00f0-0x00ff] pnp 00:07: [irq 13] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:08: [io 0x0010-0x001f] pnp 00:08: [io 0x0022-0x003f] pnp 00:08: [io 0x0044-0x004d] pnp 00:08: [io 0x0050-0x005e] pnp 00:08: [io 0x0063] pnp 00:08: [io 0x0065] pnp 00:08: [io 0x0067-0x006f] pnp 00:08: [io 0x0072-0x007f] pnp 00:08: [io 0x0080] pnp 00:08: [io 0x0084-0x0086] pnp 00:08: [io 0x0088] pnp 00:08: [io 0x008c-0x008e] pnp 00:08: [io 0x0090-0x009f] pnp 00:08: [io 0x00a2-0x00bf] pnp 00:08: [io 0x00e0-0x00ef] pnp 00:08: [io 0x025c-0x025f] pnp 00:08: [io 0x0380-0x0383] pnp 00:08: [io 0x0400-0x041f] pnp 00:08: [io 0x04d0-0x04d1] pnp 00:08: [io 0x0800-0x087f] pnp 00:08: [io 0x0400-0x03ff disabled] pnp 00:08: [io 0x0480-0x04bf] pnp 00:08: [mem 0x8c000000-0x8c01ffff] pnp 00:08: [mem 0xfed1c000-0xfed1ffff] pnp 00:08: [mem 0xfed20000-0xfed3ffff] pnp 00:08: [mem 0xfed50000-0xfed8ffff] pnp 00:08: [mem 0xffb00000-0xffbfffff] pnp 00:08: [mem 0xfff00000-0xffffffff] system 00:08: [io 0x025c-0x025f] has been reserved system 00:08: [io 0x0380-0x0383] has been reserved system 00:08: [io 0x0400-0x041f] has been reserved system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: [io 0x0800-0x087f] has been reserved system 00:08: [io 0x0480-0x04bf] has been reserved system 00:08: [mem 0x8c000000-0x8c01ffff] has been reserved system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [mem 0xfed00000-0xfed003ff] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:0a: [mem 0xfec00000-0xfec00fff] pnp 00:0a: [mem 0xfee00000-0xfee00fff] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [mem 0xe0000000-0xe3ffffff] system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x00000000-0x0009ffff] pnp 00:0c: [mem 0x000c0000-0x000cffff] pnp 00:0c: [mem 0x000e0000-0x000fffff] pnp 00:0c: [mem 0x00100000-0x3f7fffff] pnp 00:0c: [mem 0x00000000-0xffffffff disabled] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0c: [mem 0x00100000-0x3f7fffff] could not be reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1c.3: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:1c.2: BAR 8: assigned [mem 0x3f800000-0x3f9fffff] pci 0000:00:1c.2: BAR 9: assigned [mem 0x3fa00000-0x3fbfffff 64bit pref] pci 0000:00:1c.2: BAR 7: assigned [io 0x2000-0x2fff] pci 0000:00:1c.1: BAR 9: assigned [mem 0x3fc00000-0x3fdfffff 64bit pref] pci 0000:00:1c.0: BAR 8: assigned [mem 0x3fe00000-0x3fffffff] pci 0000:00:1c.0: BAR 9: assigned [mem 0x40000000-0x401fffff 64bit pref] pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff] pci 0000:00:1c.0: PCI bridge to [bus 05-05] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff] pci 0000:00:1c.0: bridge window [mem 0x3fe00000-0x3fffffff] pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 04-04] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] pci 0000:00:1c.1: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:00:1c.1: bridge window [mem 0x3fc00000-0x3fdfffff 64bit pref] pci 0000:00:1c.2: PCI bridge to [bus 03-03] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.2: bridge window [mem 0x3f800000-0x3f9fffff] pci 0000:00:1c.2: bridge window [mem 0x3fa00000-0x3fbfffff 64bit pref] pci 0000:00:1c.3: PCI bridge to [bus 01-02] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xfbefffff] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 06-06] pci 0000:00:1c.0: enabling device (0104 -> 0107) pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: enabling device (0104 -> 0107) pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: enabling device (0106 -> 0107) pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0x3f800000-0xffffffff] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] pci_bus 0000:05: resource 1 [mem 0x3fe00000-0x3fffffff] pci_bus 0000:05: resource 2 [mem 0x40000000-0x401fffff 64bit pref] pci_bus 0000:04: resource 0 [io 0xe000-0xefff] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff] pci_bus 0000:04: resource 2 [mem 0x3fc00000-0x3fdfffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] pci_bus 0000:03: resource 1 [mem 0x3f800000-0x3f9fffff] pci_bus 0000:03: resource 2 [mem 0x3fa00000-0x3fbfffff 64bit pref] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbefffff] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:06: resource 8 [mem 0x3f800000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device PCI: CLS 32 bytes, default 64 fuse init (API version 7.17) msgmni has been set to 2001 io scheduler noop registered io scheduler deadline registered (default) pcieport 0000:00:1c.0: setting latency timer to 64 pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X pcieport 0000:00:1c.1: setting latency timer to 64 pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X pcieport 0000:00:1c.2: setting latency timer to 64 pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X pcieport 0000:00:1c.3: setting latency timer to 64 pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 ACPI: AC Adapter [AC0] (on-line) input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button [SLPB] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Marking TSC unstable due to TSC halts in idle ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (58 C) Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 945GME Chipset agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 8192K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. composite sync not supported ACPI: Battery Slot [BAT0] (battery present) [drm] initialized overlay support composite sync not supported fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 128x37 fb0: inteldrmfb frame buffer device drm: registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 loop: module loaded ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ATL1E 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ATL1E 0000:04:00.0: setting latency timer to 64 rt2800pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 rt2800pci 0000:01:00.0: setting latency timer to 64 ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Registered led device: rt2800pci-phy0::radio Registered led device: rt2800pci-phy0::assoc Registered led device: rt2800pci-phy0::quality ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: using broken periodic workaround ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.2.2-dirty ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 3.2.2-dirty uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 3.2.2-dirty uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.2.2-dirty uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000dc00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 3.2.2-dirty uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usbcore: registered new interface driver uas Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input5 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Linux video capture interface: v2.00 cpuidle: using governor ladder cpuidle: using governor menu ALSA device list: No soundcards found. nf_conntrack version 0.5.0 (16015 buckets, 64060 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP westwood registered NET: Registered protocol family 17 Using IPI No-Shortcut mode input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 ata2.00: CFA: ASUS-PHISON SSD, TST2.04U, max UDMA/66 ata2.00: 15761088 sectors, multi 0: LBA ata2.01: CFA: ASUS-PHISON SSD, TST2.04P, max UDMA/66 ata2.01: 63045360 sectors, multi 0: LBA ata2.00: configured for UDMA/66 ata2.01: configured for UDMA/66 scsi 1:0:0:0: Direct-Access ATA ASUS-PHISON SSD TST2 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] 15761088 512-byte logical blocks: (8.06 GB/7.51 GiB) scsi 1:0:1:0: Direct-Access ATA ASUS-PHISON SSD TST2 PQ: 0 ANSI: 5 sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:1:0: [sdb] 63045360 512-byte logical blocks: (32.2 GB/30.0 GiB) sd 1:0:1:0: [sdb] Write Protect is off sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00 sda: sda1 sda2 sda3 sda4 sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sda] Attached SCSI disk sd 1:0:1:0: [sdb] Attached SCSI disk EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:2. Freeing unused kernel memory: 304k freed Write protecting the kernel text: 2856k Write protecting the kernel read-only data: 968k psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x020030) psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x02, 0x64. input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X snd_hda_intel 0000:00:1b.0: setting latency timer to 64 input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 EXT4-fs (sda2): re-mounted. Opts: (null) EXT4-fs (sda2): re-mounted. Opts: commit=60,discard,errors=remount-ro EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: discard,commit=60 WARNING! power/level is deprecated; use power/control instead eeepc_laptop: Eee PC Hotkey Driver eeepc_laptop: Hotkey init flags 0x41 composite sync not supported composite sync not supported eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway eeepc_laptop: PANELPOWER (4000000) not reported by BIOS, enabling anyway eeepc_laptop: Get control methods supported: 0x6101713 usb 1-8: new high-speed USB device number 2 using ehci_hcd wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated usb 1-8: New USB device found, idVendor=04f2, idProduct=b071 usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3 usb 1-8: Product: CNF7129 usb 1-8: Manufacturer: Chicony Electronics Co., Ltd. usb 1-8: SerialNumber: SN0001 uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071) input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input9 usbcore: registered new interface driver uvcvideo USB Video Class driver (1.1.1) input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input10 eeepc_laptop: BIOS says wireless lan is unblocked, but the pci device is absent eeepc_laptop: skipped wireless hotplug as probably inappropriate for this model usb 1-8: USB disconnect, device number 2 usbcore: deregistering interface driver uvcvideo composite sync not supported wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.03 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 1:0:1:0: [sdb] Stopping disk rt2800pci 0000:01:00.0: PCI INT A disabled ACPI handle has no context! ACPI handle has no context! ATL1E 0000:04:00.0: PCI INT A disabled ACPI handle has no context! pci 0000:00:1f.3: PCI INT B disabled i915 0000:00:02.0: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled uhci_hcd 0000:00:1d.3: PCI INT D disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled ACPI handle has no context! sd 1:0:0:0: [sda] Stopping disk ata_piix 0000:00:1f.2: PCI INT B disabled PM: suspend of devices complete after 219.775 msecs ehci_hcd 0000:00:1d.7: PME# enabled PM: late suspend of devices complete after 16.165 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations CPU1 is up ACPI: Waking up from system sleep state S3 power_supply BAT0: parent PNP0C0A:00 should not be sleeping snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x40114001) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x3ff03fe0) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fd13fc1) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fb13fa1) pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0xfff0, writing 0x3f903f80) pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x2020) pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100106, writing 0x100507) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) ehci_hcd 0000:00:1d.7: PME# disabled rt2800pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) rt2800pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfbef0000) rt2800pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) rt2800pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) PM: early resume of devices complete after 1.259 msecs i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ATL1E 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ATL1E 0000:04:00.0: setting latency timer to 64 rt2800pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sd 1:0:0:0: [sda] Starting disk sd 1:0:1:0: [sdb] Starting disk ata2.01: ACPI cmd ef/03:44:00:00:00:b0 (unknown) filtered out ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (unknown) filtered out ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (unknown) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (unknown) filtered out ata2.00: configured for UDMA/66 ata2.01: configured for UDMA/66 phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware PM: resume of devices complete after 267.659 msecs Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state composite sync not supported wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 Monitor-Mwait will be used to enter C-3 state keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) sd 1:0:1:0: [sdb] Stopping disk sd 1:0:0:0: [sda] Stopping disk rt2800pci 0000:01:00.0: PCI INT A disabled ACPI handle has no context! ACPI handle has no context! ATL1E 0000:04:00.0: PCI INT A disabled ACPI handle has no context! pci 0000:00:1f.3: PCI INT B disabled ata_piix 0000:00:1f.2: PCI INT B disabled i915 0000:00:02.0: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled uhci_hcd 0000:00:1d.3: PCI INT D disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled ACPI handle has no context! PM: suspend of devices complete after 147.781 msecs ehci_hcd 0000:00:1d.7: PME# enabled PM: late suspend of devices complete after 16.379 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations CPU1 is up ACPI: Waking up from system sleep state S3 power_supply BAT0: parent PNP0C0A:00 should not be sleeping snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x40114001) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x3ff03fe0) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fd13fc1) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fb13fa1) pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0xfff0, writing 0x3f903f80) pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x2020) pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100106, writing 0x100507) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) ehci_hcd 0000:00:1d.7: PME# disabled rt2800pci 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b) rt2800pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xfbef0000) rt2800pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) rt2800pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007) PM: early resume of devices complete after 1.239 msecs i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ATL1E 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ATL1E 0000:04:00.0: setting latency timer to 64 rt2800pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 sd 1:0:0:0: [sda] Starting disk sd 1:0:1:0: [sdb] Starting disk ata2.01: ACPI cmd ef/03:44:00:00:00:b0 (unknown) filtered out ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (unknown) filtered out ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (unknown) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (unknown) filtered out ata2.00: configured for UDMA/66 ata2.01: configured for UDMA/66 phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware PM: resume of devices complete after 284.444 msecs Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state composite sync not supported wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain rt2800pci 0000:01:00.0: PCI INT A disabled pci 0000:01:00.0: [1814:0781] type 0 class 0x000280 pci 0000:01:00.0: reg 10: [mem 0x00000000-0x0000ffff] pci 0000:01:00.0: PME# supported from D0 D3hot pci 0000:01:00.0: PME# disabled pci 0000:01:00.0: BAR 0: assigned [mem 0xf8000000-0xf800ffff] pci 0000:01:00.0: BAR 0: set to [mem 0xf8000000-0xf800ffff] (PCI address [0xf8000000-0xf800ffff]) rt2800pci 0000:01:00.0: enabling device (0000 -> 0002) rt2800pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 rt2800pci 0000:01:00.0: setting latency timer to 64 ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' Registered led device: rt2800pci-phy1::radio Registered led device: rt2800pci-phy1::assoc Registered led device: rt2800pci-phy1::quality phy1 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) rt2800pci 0000:01:00.0: PCI INT A disabled ACPI handle has no context! sd 1:0:1:0: [sdb] Stopping disk sd 1:0:0:0: [sda] Stopping disk ACPI handle has no context! ATL1E 0000:04:00.0: PCI INT A disabled ACPI handle has no context! pci 0000:00:1f.3: PCI INT B disabled ata_piix 0000:00:1f.2: PCI INT B disabled i915 0000:00:02.0: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled uhci_hcd 0000:00:1d.3: PCI INT D disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled ACPI handle has no context! PM: suspend of devices complete after 147.781 msecs ehci_hcd 0000:00:1d.7: PME# enabled PM: late suspend of devices complete after 16.364 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations CPU1 is up ACPI: Waking up from system sleep state S3 power_supply BAT0: parent PNP0C0A:00 should not be sleeping snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x40114001) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x3ff03fe0) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fd13fc1) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fb13fa1) pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0xfff0, writing 0x3f903f80) pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x2020) pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0xf0, writing 0x20001010) pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100106, writing 0x100507) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) ehci_hcd 0000:00:1d.7: PME# disabled rt2800pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf8000000) rt2800pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) rt2800pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) PM: early resume of devices complete after 1.237 msecs i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ATL1E 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ATL1E 0000:04:00.0: setting latency timer to 64 sd 1:0:0:0: [sda] Starting disk sd 1:0:1:0: [sdb] Starting disk rt2800pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata2.01: ACPI cmd ef/03:44:00:00:00:b0 (unknown) filtered out ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (unknown) filtered out ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (unknown) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (unknown) filtered out ata2.00: configured for UDMA/66 ata2.01: configured for UDMA/66 phy1 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware PM: resume of devices complete after 276.344 msecs Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state composite sync not supported wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) rt2800pci 0000:01:00.0: PCI INT A disabled ACPI handle has no context! sd 1:0:1:0: [sdb] Stopping disk sd 1:0:0:0: [sda] Stopping disk ACPI handle has no context! ATL1E 0000:04:00.0: PCI INT A disabled ACPI handle has no context! pci 0000:00:1f.3: PCI INT B disabled ata_piix 0000:00:1f.2: PCI INT B disabled i915 0000:00:02.0: PCI INT A disabled uhci_hcd 0000:00:1d.3: PCI INT D disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled ACPI handle has no context! PM: suspend of devices complete after 146.486 msecs ehci_hcd 0000:00:1d.7: PME# enabled PM: late suspend of devices complete after 16.352 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations CPU1 is up ACPI: Waking up from system sleep state S3 power_supply BAT0: parent PNP0C0A:00 should not be sleeping snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x40114001) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x3ff03fe0) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fd13fc1) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fb13fa1) pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0xfff0, writing 0x3f903f80) pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x2020) pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100106, writing 0x100507) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) ehci_hcd 0000:00:1d.7: PME# disabled rt2800pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf8000000) rt2800pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) rt2800pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) PM: early resume of devices complete after 1.249 msecs i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ATL1E 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ATL1E 0000:04:00.0: setting latency timer to 64 sd 1:0:0:0: [sda] Starting disk sd 1:0:1:0: [sdb] Starting disk rt2800pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata2.01: ACPI cmd ef/03:44:00:00:00:b0 (unknown) filtered out ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (unknown) filtered out ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (unknown) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (unknown) filtered out ata2.00: configured for UDMA/66 ata2.01: configured for UDMA/66 phy1 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware PM: resume of devices complete after 282.772 msecs Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state composite sync not supported wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated phy1 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. --------------------- lspci -v output: --------------------- 00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03) Subsystem: ASUSTeK Computer Inc. Device 830f Flags: bus master, fast devsel, latency 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 830f Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f7f00000 (32-bit, non-prefetchable) [size=512K] I/O ports at dc80 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: ASUSTeK Computer Inc. Device 830f Flags: bus master, fast devsel, latency 0 Memory at f7f80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 834a Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: 3fe00000-3fffffff Prefetchable memory behind bridge: 0000000040000000-00000000401fffff Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbf00000-fbffffff Prefetchable memory behind bridge: 000000003fc00000-000000003fdfffff Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: 3f800000-3f9fffff Prefetchable memory behind bridge: 000000003fa00000-000000003fbfffff Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: f8000000-fbefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 830f Flags: bus master, medium devsel, latency 0, IRQ 23 I/O ports at d480 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 830f Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 830f Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device 830f Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at dc00 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 830f Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=32 Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) Subsystem: ASUSTeK Computer Inc. Device 830f Flags: bus master, medium devsel, latency 0 Capabilities: <access denied> 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 830f Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02) Subsystem: ASUSTeK Computer Inc. Device 830f Flags: medium devsel, IRQ 19 I/O ports at 0400 [size=32] 01:00.0 Network controller: RaLink RT2860 Subsystem: RaLink Device 2790 Physical Slot: eeepc-wifi Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at f8000000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rt2800pci 04:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: ASUSTeK Computer Inc. Device 8324 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K] I/O ports at ec80 [size=128] Capabilities: <access denied> Kernel driver in use: ATL1E ----------------- More errors from dmesg (lot of noise, but for any case): ----------------- wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated phy1 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. phy1 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) rt2800pci 0000:01:00.0: PCI INT A disabled ACPI handle has no context! sd 1:0:1:0: [sdb] Stopping disk sd 1:0:0:0: [sda] Stopping disk ACPI handle has no context! ATL1E 0000:04:00.0: PCI INT A disabled ACPI handle has no context! pci 0000:00:1f.3: PCI INT B disabled ata_piix 0000:00:1f.2: PCI INT B disabled i915 0000:00:02.0: PCI INT A disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.3: PCI INT D disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled ACPI handle has no context! PM: suspend of devices complete after 147.684 msecs ehci_hcd 0000:00:1d.7: PME# enabled PM: late suspend of devices complete after 16.444 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations CPU1 is up ACPI: Waking up from system sleep state S3 snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x40114001) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x3ff03fe0) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fd13fc1) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fb13fa1) pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0xfff0, writing 0x3f903f80) pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x2020) pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100106, writing 0x100507) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) ehci_hcd 0000:00:1d.7: PME# disabled rt2800pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf8000000) rt2800pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) rt2800pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) PM: early resume of devices complete after 1.468 msecs i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ATL1E 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ATL1E 0000:04:00.0: setting latency timer to 64 sd 1:0:0:0: [sda] Starting disk sd 1:0:1:0: [sdb] Starting disk rt2800pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata2.01: ACPI cmd ef/03:44:00:00:00:b0 (unknown) filtered out ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (unknown) filtered out ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (unknown) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (unknown) filtered out ata2.00: configured for UDMA/66 ata2.01: configured for UDMA/66 PM: resume of devices complete after 347.028 msecs Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state composite sync not supported phy1 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) rt2800pci 0000:01:00.0: PCI INT A disabled ACPI handle has no context! sd 1:0:1:0: [sdb] Stopping disk sd 1:0:0:0: [sda] Stopping disk ACPI handle has no context! ATL1E 0000:04:00.0: PCI INT A disabled ACPI handle has no context! pci 0000:00:1f.3: PCI INT B disabled ata_piix 0000:00:1f.2: PCI INT B disabled i915 0000:00:02.0: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled uhci_hcd 0000:00:1d.3: PCI INT D disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled ACPI handle has no context! PM: suspend of devices complete after 147.040 msecs ehci_hcd 0000:00:1d.7: PME# enabled PM: late suspend of devices complete after 16.404 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations CPU1 is up ACPI: Waking up from system sleep state S3 power_supply BAT0: parent PNP0C0A:00 should not be sleeping snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x40114001) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x3ff03fe0) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fd13fc1) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fb13fa1) pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0xfff0, writing 0x3f903f80) pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x2020) pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100106, writing 0x100507) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) ehci_hcd 0000:00:1d.7: PME# disabled rt2800pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf8000000) rt2800pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) rt2800pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) PM: early resume of devices complete after 1.235 msecs i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ATL1E 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ATL1E 0000:04:00.0: setting latency timer to 64 sd 1:0:0:0: [sda] Starting disk sd 1:0:1:0: [sdb] Starting disk rt2800pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata2.01: ACPI cmd ef/03:44:00:00:00:b0 (unknown) filtered out ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (unknown) filtered out ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (unknown) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (unknown) filtered out ata2.00: configured for UDMA/66 ata2.01: configured for UDMA/66 phy1 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware PM: resume of devices complete after 276.155 msecs Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state composite sync not supported wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticate with 00:21:91:d5:1e:57 (try 2) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) rt2800pci 0000:01:00.0: PCI INT A disabled ACPI handle has no context! sd 1:0:1:0: [sdb] Stopping disk sd 1:0:0:0: [sda] Stopping disk ACPI handle has no context! ATL1E 0000:04:00.0: PCI INT A disabled ACPI handle has no context! pci 0000:00:1f.3: PCI INT B disabled ata_piix 0000:00:1f.2: PCI INT B disabled i915 0000:00:02.0: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled uhci_hcd 0000:00:1d.3: PCI INT D disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled ACPI handle has no context! PM: suspend of devices complete after 143.772 msecs ehci_hcd 0000:00:1d.7: PME# enabled PM: late suspend of devices complete after 16.369 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations CPU1 is up ACPI: Waking up from system sleep state S3 power_supply BAT0: parent PNP0C0A:00 should not be sleeping snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x40114001) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x3ff03fe0) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fd13fc1) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fb13fa1) pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0xfff0, writing 0x3f903f80) pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x2020) pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100106, writing 0x100507) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) ehci_hcd 0000:00:1d.7: PME# disabled rt2800pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf8000000) rt2800pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) rt2800pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) PM: early resume of devices complete after 1.255 msecs i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ATL1E 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ATL1E 0000:04:00.0: setting latency timer to 64 sd 1:0:0:0: [sda] Starting disk sd 1:0:1:0: [sdb] Starting disk rt2800pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata2.01: ACPI cmd ef/03:44:00:00:00:b0 (unknown) filtered out ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (unknown) filtered out ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (unknown) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (unknown) filtered out ata2.00: configured for UDMA/66 ata2.01: configured for UDMA/66 phy1 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware PM: resume of devices complete after 275.926 msecs Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state composite sync not supported wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 keyboard: can't emulate rawmode for keycode 240 wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) rt2800pci 0000:01:00.0: PCI INT A disabled ACPI handle has no context! sd 1:0:1:0: [sdb] Stopping disk sd 1:0:0:0: [sda] Stopping disk ACPI handle has no context! ATL1E 0000:04:00.0: PCI INT A disabled ACPI handle has no context! pci 0000:00:1f.3: PCI INT B disabled ata_piix 0000:00:1f.2: PCI INT B disabled i915 0000:00:02.0: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled uhci_hcd 0000:00:1d.3: PCI INT D disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled ACPI handle has no context! PM: suspend of devices complete after 143.781 msecs ehci_hcd 0000:00:1d.7: PME# enabled PM: late suspend of devices complete after 16.362 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations CPU1 is up ACPI: Waking up from system sleep state S3 power_supply BAT0: parent PNP0C0A:00 should not be sleeping snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x40114001) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x3ff03fe0) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fd13fc1) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fb13fa1) pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0xfff0, writing 0x3f903f80) pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x2020) pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100106, writing 0x100507) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) ehci_hcd 0000:00:1d.7: PME# disabled rt2800pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf8000000) rt2800pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) rt2800pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) PM: early resume of devices complete after 1.234 msecs i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ATL1E 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ATL1E 0000:04:00.0: setting latency timer to 64 sd 1:0:0:0: [sda] Starting disk sd 1:0:1:0: [sdb] Starting disk rt2800pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata2.01: ACPI cmd ef/03:44:00:00:00:b0 (unknown) filtered out ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (unknown) filtered out ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (unknown) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (unknown) filtered out ata2.00: configured for UDMA/66 ata2.01: configured for UDMA/66 phy1 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware PM: resume of devices complete after 274.997 msecs Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state composite sync not supported wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociated from 00:21:91:d5:1e:57 (Reason: 4) wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated phy1 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. wlan0: deauthenticated from 00:21:91:d5:1e:57 (Reason: 2) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated phy1 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated phy1 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. phy1 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. wlan0: deauthenticating from 00:21:91:d5:1e:57 by local choice (reason=3) cfg80211: Calling CRDA to update world regulatory domain PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.01 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. Suspending console(s) (use no_console_suspend to debug) rt2800pci 0000:01:00.0: PCI INT A disabled ACPI handle has no context! sd 1:0:1:0: [sdb] Stopping disk sd 1:0:0:0: [sda] Stopping disk ACPI handle has no context! ATL1E 0000:04:00.0: PCI INT A disabled ACPI handle has no context! pci 0000:00:1f.3: PCI INT B disabled ata_piix 0000:00:1f.2: PCI INT B disabled i915 0000:00:02.0: PCI INT A disabled uhci_hcd 0000:00:1d.0: PCI INT A disabled uhci_hcd 0000:00:1d.2: PCI INT C disabled uhci_hcd 0000:00:1d.1: PCI INT B disabled uhci_hcd 0000:00:1d.3: PCI INT D disabled ehci_hcd 0000:00:1d.7: PCI INT A disabled snd_hda_intel 0000:00:1b.0: PCI INT A disabled ACPI handle has no context! PM: suspend of devices complete after 147.765 msecs ehci_hcd 0000:00:1d.7: PME# enabled PM: late suspend of devices complete after 16.371 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... Booting Node 0 Processor 1 APIC 0x1 smpboot cpu 1: start_ip = 9b000 Initializing CPU#1 Calibrating delay loop (skipped) already calibrated this CPU Atom PSE erratum detected, BIOS microcode update recommended Disabled fast string operations CPU1 is up ACPI: Waking up from system sleep state S3 power_supply BAT0: parent PNP0C0A:00 should not be sleeping snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002) pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x40114001) pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x3ff03fe0) pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x3030) pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fd13fc1) pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) pcieport 0000:00:1c.2: restoring config space at offset 0x9 (was 0x1fff1, writing 0x3fb13fa1) pcieport 0000:00:1c.2: restoring config space at offset 0x8 (was 0xfff0, writing 0x3f903f80) pcieport 0000:00:1c.2: restoring config space at offset 0x7 (was 0xf0, writing 0x2020) pcieport 0000:00:1c.2: restoring config space at offset 0x1 (was 0x100104, writing 0x100507) pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0xf0, writing 0x1010) pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100106, writing 0x100507) uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) ehci_hcd 0000:00:1d.7: PME# disabled rt2800pci 0000:01:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf8000000) rt2800pci 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8) rt2800pci 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006) PM: early resume of devices complete after 1.233 msecs i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 snd_hda_intel 0000:00:1b.0: setting latency timer to 64 snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 usb usb2: root hub lost power or was reset uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 usb usb3: root hub lost power or was reset uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 usb usb4: root hub lost power or was reset uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 usb usb5: root hub lost power or was reset ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: setting latency timer to 64 pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ATL1E 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ATL1E 0000:04:00.0: setting latency timer to 64 sd 1:0:0:0: [sda] Starting disk sd 1:0:1:0: [sdb] Starting disk rt2800pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata2.01: ACPI cmd ef/03:44:00:00:00:b0 (unknown) filtered out ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (unknown) filtered out ata2.00: ACPI cmd ef/03:44:00:00:00:a0 (unknown) filtered out ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (unknown) filtered out ata2.00: configured for UDMA/66 ata2.01: configured for UDMA/66 phy1 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware PM: resume of devices complete after 338.915 msecs Restarting tasks ... done. video LNXVIDEO:00: Restoring backlight state composite sync not supported wlan0: authenticate with 00:21:91:d5:1e:57 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:d5:1e:57 (try 1) wlan0: RX AssocResp from 00:21:91:d5:1e:57 (capab=0x411 status=0 aid=1) wlan0: associated -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html