Search Linux Wireless

[PATCH 15/15] brcm80211: fmac: make sdio firmware filename specific

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The sdio driver part uses firmware name brcmfmac.bin. With addition
of usb this name is too generic. This patch renames the filename
to brcmfmac-sdio.bin.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx>
Reviewed-by: Alwin Beukers <alwin@xxxxxxxxxxxx>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
 drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 253fc20..0b467b0 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -309,10 +309,10 @@ struct rte_console {
 /* Flags for SDH calls */
 #define F2SYNC	(SDIO_REQ_4BYTE | SDIO_REQ_FIXED)
 
-#define BRCMFMAC_FW_NAME	"brcm/brcmfmac.bin"
-#define BRCMFMAC_NV_NAME	"brcm/brcmfmac.txt"
-MODULE_FIRMWARE(BRCMFMAC_FW_NAME);
-MODULE_FIRMWARE(BRCMFMAC_NV_NAME);
+#define BRCMF_SDIO_FW_NAME	"brcm/brcmfmac-sdio.bin"
+#define BRCMF_SDIO_NV_NAME	"brcm/brcmfmac-sdio.txt"
+MODULE_FIRMWARE(BRCMF_SDIO_FW_NAME);
+MODULE_FIRMWARE(BRCMF_SDIO_NV_NAME);
 
 #define BRCMF_IDLE_IMMEDIATE	(-1)	/* Enter idle immediately */
 #define BRCMF_IDLE_ACTIVE	0	/* Do not request any SD clock change
@@ -3202,7 +3202,7 @@ static int brcmf_sdbrcm_download_code_file(struct brcmf_sdio *bus)
 
 	brcmf_dbg(INFO, "Enter\n");
 
-	ret = request_firmware(&bus->firmware, BRCMFMAC_FW_NAME,
+	ret = request_firmware(&bus->firmware, BRCMF_SDIO_FW_NAME,
 			       &bus->sdiodev->func[2]->dev);
 	if (ret) {
 		brcmf_dbg(ERROR, "Fail to request firmware %d\n", ret);
@@ -3299,7 +3299,7 @@ static int brcmf_sdbrcm_download_nvram(struct brcmf_sdio *bus)
 	char *bufp;
 	int ret;
 
-	ret = request_firmware(&bus->firmware, BRCMFMAC_NV_NAME,
+	ret = request_firmware(&bus->firmware, BRCMF_SDIO_NV_NAME,
 			       &bus->sdiodev->func[2]->dev);
 	if (ret) {
 		brcmf_dbg(ERROR, "Fail to request nvram %d\n", ret);
-- 
1.7.5.4


--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux