This brings the rt2800 channel switching code for RT3572 closer to the
v2.5.0.0 Ralink RT3572 driver.
Signed-off-by: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 7c05dee..8aabd0d 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -2444,6 +2444,8 @@ struct mac_iveiv_entry {
struct rt2800_drv_data {
u8 calibration_bw20;
u8 calibration_bw40;
+ u8 bbp25;
+ u8 bbp26;
};
#endif /* RT2800_H */
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index fad0e77..cb841f4 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1754,8 +1754,8 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
u32 reg;
if (rf->channel <= 14) {
- rt2800_bbp_write(rt2x00dev, 25, 0x15);
- rt2800_bbp_write(rt2x00dev, 26, 0x85);
+ rt2800_bbp_write(rt2x00dev, 25, drv_data->bbp25);
+ rt2800_bbp_write(rt2x00dev, 26, drv_data->bbp26);
} else {
rt2800_bbp_write(rt2x00dev, 25, 0x09);
rt2800_bbp_write(rt2x00dev, 26, 0xff);
@@ -3623,6 +3623,12 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2800_init_rx_filter(rt2x00dev, true, 0x27, 0x15);
}
+ /*
+ * Save BBP 25 & 26 values for later use in channel switching
+ */
+ rt2800_bbp_read(rt2x00dev, 25, &drv_data->bbp25);
+ rt2800_bbp_read(rt2x00dev, 26, &drv_data->bbp26);
+
if (!rt2x00_rt(rt2x00dev, RT5390)) {
/*
* Set back to initial state
--
1.7.9
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
