I've been looking into some association problems seen with a MacBook Pro 8,2 that has BCM4331 wireless, which I've confirmed still exist in wireless-testing. The association failures reliably start appearing after the machine is resumed from s3 without external power applied (whether or not power is applied when the machine is suspended doesn't matter). When the association failures are happening the BCM4331 seems to be able to receive packets okay, as it can scan successfully. Transmissions don't work though; no frames from the BCM4331 are ever seen on the air, as though the tx path is off. Reloading both the b43 and bcma drivers gets things working again, but reloading just b43 does not. I've been looking around a bit in the b43 and bcma drivers, but so far I haven't found the reason why this happens. Any help would be appreciated. Let me know if there's additional information I can provide. Thanks, Seth -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
