On 2012-01-20 10:52, Martin Hundebøll wrote:
I'm running an ad-hoc network with two pandaboards using the following commands to setup the network: root@panda0 # ip link set dev wlan0 address 7e:78:47:8c:26:52 root@panda0 # iw dev wlan0 set type ibss root@panda0 # ip link set dev wlan0 up root@panda0 # iw dev wlan0 ibss join panda-mesh 2412 02:72:CF:28:19:1A root@panda0 # iw phy phy0 set rts 100 root@panda0 # ip addr add 10.10.10.52/24 dev wlan0 and root@panda1 # ip link set dev wlan0 address 7e:78:47:8c:26:53 root@panda1 # iw dev wlan0 set type ibss root@panda1 # ip link set dev wlan0 up root@panda1 # iw dev wlan0 ibss join panda-mesh 2412 02:72:CF:28:19:1A root@panda1 # iw phy phy0 set rts 100 root@panda1 # ip addr add 10.10.10.53/24 dev wlan0 After this, the nodes list each other in a station dump. I then run ping: root@panda0 # ping 10.10.10.53 but only two requests are transmitted before the devices restart as seen in the attached dmesg logs. The tcpdump from panda1 is attached in tcpdump.txt. I have attached the kernel config and here is some additional info:
I have investigated the issue further and it seems to be related to the rts-setting in the commands listed above. Since my last mail I have update to kernel v3.2.1 and now the watchdog interrupts continuously if I configure the RTS threshold to 62 bytes or less. Changing the threshold to 63 bytes or more stops the watchdog interrupt from occuring. Kind regards, Martin Hundebøll -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
