Hi, This patchset fixes some bugs in PLT mode and adds support for 2 MAC addresses based on the NVS file or in the device's fuse ROM. This two patches I sent as part of the "wl12xx: read MAC from fuse rom" series are superseded by this set. Cheers, Luca. Ido Yariv (3): wl12xx: Acquire lock before stopping plt wl12xx: Power off after flushing work wl12xx: Fix potential interrupt storm Luciano Coelho (5): wl12xx: cancel delayed elp work and clear flags when stopping PLT wl12xx: move partition table definition to io.c wl12xx: read chip ID and HW PG version during probe wl12xx: use two MAC addresses based on the NVS or from fuse ROM wl12xx: add testmode operation to read the BD_ADDR from Fuse ROM drivers/net/wireless/wl12xx/boot.c | 102 ++------------- drivers/net/wireless/wl12xx/boot.h | 10 -- drivers/net/wireless/wl12xx/debug.h | 1 + drivers/net/wireless/wl12xx/io.c | 59 +++++++++ drivers/net/wireless/wl12xx/io.h | 2 + drivers/net/wireless/wl12xx/main.c | 216 ++++++++++++++++++++++++++------ drivers/net/wireless/wl12xx/reg.h | 27 ++++ drivers/net/wireless/wl12xx/testmode.c | 50 ++++++++ drivers/net/wireless/wl12xx/wl12xx.h | 7 +- 9 files changed, 335 insertions(+), 139 deletions(-) -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
