Search Linux Wireless

Re: p54usb (LM87) not correctly working with usb1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 01/21/2012 01:53 AM, Kristoffer Janke wrote:
Hello,
i have an older server that only has usb 1.1 ports and attached a "Siemens
Gigaset USB Adapter 54 V2" (chip: ISL3887, vid/pid: 0x083a/0x4521), with the
firmware http://daemonizer.de/prism54/prism54-fw/fw-usb/2.13.25.0.lm87.arm the
device comes up and everything looks fine.

the only problem is, that hostapd does not work correctly, no wlan client can
connect (but the device is in their list).
because i read somewhere that usb1.1 together with this device is not working
correctly with hostapd, i tried it on a different machine, routed the device
through virtual box usb driver and there it was working perfect; to check that
its really a usb1.1 problem, i disabled the usb2.0 controllers and retried on
that same machine -> not working, same behaviour as on the older server; i
tested it again with usb 2.0 -> worked, 1.1 -> non working, 2.0 -> working.

so it looks like there is something bahving wrong if the device is connected to
an usb 1.0/1.1 port.

im willing to debug this stuff if i get some pointers...

My Dell DW1450, which uses p54usb, does not work at all on a USB1.1 port. I tried with 3.3-rc1 from wireless-testing and with a 2.6.30 kernel. The failure does not appear to be a regression. With a 3.2 kernel, it it works fine on USB2.0 ports.

Larry

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux