From: Mohammed Shafi Shajakhan <mohammed@xxxxxxxxxxxxxxxx> also remove an unused macro and a function declaration Signed-off-by: Mohammed Shafi Shajakhan <mohammed@xxxxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/calib.h | 1 - 3 files changed, 1 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 2589b38..2b0bfb8 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -46,7 +46,7 @@ static const int m2ThreshExt_off = 127; * @chan: * * This is the function to change channel on single-chip devices, that is - * all devices after ar9280. + * for AR9300 family of chipsets. * * This function takes the channel value in MHz and sets * hardware channel value. Assumes writes have been enabled to analog bus. diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index b30e9fc..171ccf7 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -679,7 +679,6 @@ void ath9k_deinit_device(struct ath_softc *sc); void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw); void ath9k_reload_chainmask_settings(struct ath_softc *sc); -void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw); bool ath9k_uses_beacons(int type); #ifdef CONFIG_ATH9K_PCI diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h index 05b9dbf..3b33996 100644 --- a/drivers/net/wireless/ath/ath9k/calib.h +++ b/drivers/net/wireless/ath/ath9k/calib.h @@ -19,7 +19,6 @@ #include "hw.h" -#define AR_PHY_CCA_FILTERWINDOW_LENGTH_INIT 3 #define AR_PHY_CCA_FILTERWINDOW_LENGTH 5 #define NUM_NF_READINGS 6 -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
