On 6 Jan, 2012, at 23:51, Larry Finger <Larry.Finger@xxxxxxxxxxxx> wrote: > On 01/06/2012 09:02 AM, lina wrote: >> Hi, >> >> a quick question, how to clear the b43? >> >> >> a detailed background stories as following: >> >> >> I installed the b43 following the advice given by list, >> mainly from >> http://linuxwireless.org/en/users/Drivers/b43 >> >> it WORKED. >> >> but yesterday I removed the old kernel 3.2-rc6, which is the one b43 worked, >> and installed the 3.2 from kernel.org. I guess it's latest, than 3.2-rc6 ? >> >> I don't know how to remove the b43 since the trial of >> make uninstall in pathTo/b43-fwcutter-015 not work. >> >> so I just did something like make install again, and then >> 1 >> <http://linuxwireless.org/en/users/Drivers/b43#CA-d6bf7044c28bbe20619873aa0dd5f8faa0864c61_1> >> export FIRMWARE_INSTALL_DIR="/lib/firmware" >> 2 >> <http://linuxwireless.org/en/users/Drivers/b43#CA-d6bf7044c28bbe20619873aa0dd5f8faa0864c61_2> >> wget http://www.lwfinger.com/b43-firmware/broadcom-wl-5.100.138.tar.bz2 >> 3 >> <http://linuxwireless.org/en/users/Drivers/b43#CA-d6bf7044c28bbe20619873aa0dd5f8faa0864c61_3> >> tar xjf broadcom-wl-5.100.138.tar.bz2 >> 4 sudo b43-fwcutter -w "$FIRMWARE_INSTALL_DIR" >> broadcom-wl-5.100.138/linux/wl_apsta.o >> >> dmesg showed me: >> [ 127.434017] cfg80211: Calling CRDA to update world regulatory domain >> [ 127.704793] b43-phy0: Broadcom 4331 WLAN found (core revision 29) >> [ 127.704821] bcma: Switched to core: 0x812 >> [ 127.705237] b43-phy0 ERROR: FOUND UNSUPPORTED PHY (Analog 9, Type 7, Revision 1) >> [ 127.705244] b43: probe of bcma0:0 failed with error -95 >> [ 127.705260] Broadcom 43xx driver loaded [ Features: PMNLS ] >> [ 431.367724] applesmc: FS! : read arg fail > > You are very confused. The only thing You are right. I'm lost. And I'm the person who never learned how to read map. I mean in daily life, I have map in hand, GPS. But sometimes I can only find the way by asking people. Sigh ... > you can "uninstall" is the firmware cutter. The driver b43 is part of the kernel. Installing a new kernel gets you a new version. > > Your problem with the 4331 is that you are getting your kernel from the wrong source. If you want to run that device with 4331, you need code that will not be in a mainline kernel until 3.3-rc1, which will not be available for about 2 weeks. The kernel you need is the one found in the git tree of wireless-testing, or you need to build a recent compat-wireless package. I suspect that is what you did with 3.2-rc6. Yes, did remove old kernel also removed my old built compact-wireless? Sorry im not in front of computer. Just check email by phone. Thanks, > > Larry > > -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html