Search Linux Wireless

[PATCH 4/7] rt2800usb: Let rt2x00usb handle USB padding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jakub Kiciński <kubakici@xxxxx>

Older USB drivers does not append end padding to skb but instead report
it in size of data to be transmitted to HW. rt2800usb should follow that
behaviour. Custom write_tx_data callback which was adding pad to skb
is not be needed any more.

Thanks to this patch frames handed back from rt2800usb to mac80211 will
no longer contain end padding.

Signed-off-by: Jakub Kicinski <kubakici@xxxxx>
Signed-off-by: Gertjan van Wingerde <gwingerde@xxxxxxxxx>
---
 drivers/net/wireless/rt2x00/rt2800usb.c |   37 ++++++++----------------------
 1 files changed, 10 insertions(+), 27 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 313cc7f..b15c215 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -400,10 +400,10 @@ static void rt2800usb_write_tx_desc(struct queue_entry *entry,
 	/*
 	 * The size of TXINFO_W0_USB_DMA_TX_PKT_LEN is
 	 * TXWI + 802.11 header + L2 pad + payload + pad,
-	 * so need to decrease size of TXINFO and USB end pad.
+	 * so need to decrease size of TXINFO.
 	 */
 	rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN,
-			   entry->skb->len - TXINFO_DESC_SIZE - 4);
+			   roundup(entry->skb->len, 4) - TXINFO_DESC_SIZE);
 	rt2x00_set_field32(&word, TXINFO_W0_WIV,
 			   !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
 	rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2);
@@ -421,37 +421,20 @@ static void rt2800usb_write_tx_desc(struct queue_entry *entry,
 	skbdesc->desc_len = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
 }
 
-static void rt2800usb_write_tx_data(struct queue_entry *entry,
-					struct txentry_desc *txdesc)
+/*
+ * TX data initialization
+ */
+static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
 {
-	unsigned int len;
-	int err;
-
-	rt2800_write_tx_data(entry, txdesc);
-
 	/*
-	 * pad(1~3 bytes) is added after each 802.11 payload.
-	 * USB end pad(4 bytes) is added at each USB bulk out packet end.
+	 * pad(1~3 bytes) is needed after each 802.11 payload.
+	 * USB end pad(4 bytes) is needed at each USB bulk out packet end.
 	 * TX frame format is :
 	 * | TXINFO | TXWI | 802.11 header | L2 pad | payload | pad | USB end pad |
 	 *                 |<------------- tx_pkt_len ------------->|
 	 */
-	len = roundup(entry->skb->len, 4) + 4;
-	err = skb_padto(entry->skb, len);
-	if (unlikely(err)) {
-		WARNING(entry->queue->rt2x00dev, "TX SKB padding error, out of memory\n");
-		return;
-	}
 
-	entry->skb->len = len;
-}
-
-/*
- * TX data initialization
- */
-static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
-{
-	return entry->skb->len;
+	return roundup(entry->skb->len, 4) + 4;
 }
 
 /*
@@ -807,7 +790,7 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = {
 	.flush_queue		= rt2x00usb_flush_queue,
 	.tx_dma_done		= rt2800usb_tx_dma_done,
 	.write_tx_desc		= rt2800usb_write_tx_desc,
-	.write_tx_data		= rt2800usb_write_tx_data,
+	.write_tx_data		= rt2800_write_tx_data,
 	.write_beacon		= rt2800_write_beacon,
 	.clear_beacon		= rt2800_clear_beacon,
 	.get_tx_data_len	= rt2800usb_get_tx_data_len,
-- 
1.7.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux