Debug message level macros are used for debug purpose. It would be more appropriate to place them at dhd_dbg.h. Reviewed-by: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx> Reviewed-by: Arend van Spriel <arend@xxxxxxxxxxxx> Reviewed-by: Alwin Beukers <alwin@xxxxxxxxxxxx> Signed-off-by: Franky Lin <frankyl@xxxxxxxxxxxx> --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 15 --------------- drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h | 15 +++++++++++++++ 2 files changed, 15 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 45b076e..a828d82 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -667,21 +667,6 @@ extern void brcmf_c_pktfilter_offload_enable(struct brcmf_pub *drvr, char *arg, #define BRCMF_DCMD_MEDLEN 1536 /* "med" cmd buffer required */ #define BRCMF_DCMD_MAXLEN 8192 /* max length cmd buffer required */ -/* message levels */ -#define BRCMF_ERROR_VAL 0x0001 -#define BRCMF_TRACE_VAL 0x0002 -#define BRCMF_INFO_VAL 0x0004 -#define BRCMF_DATA_VAL 0x0008 -#define BRCMF_CTL_VAL 0x0010 -#define BRCMF_TIMER_VAL 0x0020 -#define BRCMF_HDRS_VAL 0x0040 -#define BRCMF_BYTES_VAL 0x0080 -#define BRCMF_INTR_VAL 0x0100 -#define BRCMF_GLOM_VAL 0x0400 -#define BRCMF_EVENT_VAL 0x0800 -#define BRCMF_BTA_VAL 0x1000 -#define BRCMF_ISCAN_VAL 0x2000 - /* Enter idle immediately (no timeout) */ #define BRCMF_IDLE_IMMEDIATE (-1) #define BRCMF_IDLE_ACTIVE 0 /* Do not request any SD clock change diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h index 7467922..bb26ee3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h @@ -17,6 +17,21 @@ #ifndef _BRCMF_DBG_H_ #define _BRCMF_DBG_H_ +/* message levels */ +#define BRCMF_ERROR_VAL 0x0001 +#define BRCMF_TRACE_VAL 0x0002 +#define BRCMF_INFO_VAL 0x0004 +#define BRCMF_DATA_VAL 0x0008 +#define BRCMF_CTL_VAL 0x0010 +#define BRCMF_TIMER_VAL 0x0020 +#define BRCMF_HDRS_VAL 0x0040 +#define BRCMF_BYTES_VAL 0x0080 +#define BRCMF_INTR_VAL 0x0100 +#define BRCMF_GLOM_VAL 0x0400 +#define BRCMF_EVENT_VAL 0x0800 +#define BRCMF_BTA_VAL 0x1000 +#define BRCMF_ISCAN_VAL 0x2000 + #if defined(BCMDBG) #define brcmf_dbg(level, fmt, ...) \ -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
