From: Arend van Spriel <arend@xxxxxxxxxxxx>
A number of functions in pmu.c are not used or adding no functionality
at all. These have been removed.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx>
Reviewed-by: Alwin Beukers <alwin@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
Signed-off-by: Franky Lin <frankyl@xxxxxxxxxxxx>
---
drivers/net/wireless/brcm80211/brcmsmac/aiutils.c | 7 +--
drivers/net/wireless/brcm80211/brcmsmac/pmu.c | 57 ---------------------
drivers/net/wireless/brcm80211/brcmsmac/pmu.h | 3 -
3 files changed, 1 insertions(+), 66 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
index 7e5d41b..3d37b0a 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
@@ -721,14 +721,9 @@ static struct si_info *ai_doattach(struct si_info *sii,
/* PMU specific initializations */
if (ai_get_cccaps(sih) & CC_CAP_PMU) {
- u32 xtalfreq;
si_pmu_init(sih);
- si_pmu_chip_init(sih);
-
- xtalfreq = si_pmu_measure_alpclk(sih);
- si_pmu_pll_init(sih, xtalfreq);
+ (void)si_pmu_measure_alpclk(sih);
si_pmu_res_init(sih);
- si_pmu_swreg_init(sih);
}
/* setup the GPIO based LED powersave register */
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pmu.c b/drivers/net/wireless/brcm80211/brcmsmac/pmu.c
index 9a4d367..d972e9c 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/pmu.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/pmu.c
@@ -227,19 +227,6 @@ u16 si_pmu_fast_pwrup_delay(struct si_pub *sih)
return (u16) delay;
}
-void si_pmu_sprom_enable(struct si_pub *sih, bool enable)
-{
- struct chipcregs __iomem *cc;
- uint origidx;
-
- /* Remember original core before switch to chipc */
- origidx = ai_coreidx(sih);
- cc = ai_setcoreidx(sih, SI_CC_IDX);
-
- /* Return to original core */
- ai_setcoreidx(sih, origidx);
-}
-
/* Read/write a chipcontrol reg */
u32 si_pmu_chipcontrol(struct si_pub *sih, uint reg, u32 mask, u32 val)
{
@@ -325,50 +312,6 @@ void si_pmu_init(struct si_pub *sih)
bcma_set32(core, CHIPCREGOFFS(pmucontrol), PCTL_NOILP_ON_WAIT);
}
-/* initialize PMU chip controls and other chip level stuff */
-void si_pmu_chip_init(struct si_pub *sih)
-{
- uint origidx;
-
- /* Gate off SPROM clock and chip select signals */
- si_pmu_sprom_enable(sih, false);
-
- /* Remember original core */
- origidx = ai_coreidx(sih);
-
- /* Return to original core */
- ai_setcoreidx(sih, origidx);
-}
-
-/* initialize PMU switch/regulators */
-void si_pmu_swreg_init(struct si_pub *sih)
-{
-}
-
-/* initialize PLL */
-void si_pmu_pll_init(struct si_pub *sih, uint xtalfreq)
-{
- struct chipcregs __iomem *cc;
- uint origidx;
-
- /* Remember original core before switch to chipc */
- origidx = ai_coreidx(sih);
- cc = ai_setcoreidx(sih, SI_CC_IDX);
-
- switch (ai_get_chip_id(sih)) {
- case BCM4313_CHIP_ID:
- case BCM43224_CHIP_ID:
- case BCM43225_CHIP_ID:
- /* ??? */
- break;
- default:
- break;
- }
-
- /* Return to original core */
- ai_setcoreidx(sih, origidx);
-}
-
/* initialize PMU resources */
void si_pmu_res_init(struct si_pub *sih)
{
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pmu.h b/drivers/net/wireless/brcm80211/brcmsmac/pmu.h
index 3a08c62..dcd893c 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/pmu.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/pmu.h
@@ -29,10 +29,7 @@ extern void si_pmu_pllupd(struct si_pub *sih);
extern void si_pmu_spuravoid(struct si_pub *sih, u8 spuravoid);
extern u32 si_pmu_pllcontrol(struct si_pub *sih, uint reg, u32 mask, u32 val);
extern void si_pmu_init(struct si_pub *sih);
-extern void si_pmu_chip_init(struct si_pub *sih);
-extern void si_pmu_pll_init(struct si_pub *sih, u32 xtalfreq);
extern void si_pmu_res_init(struct si_pub *sih);
-extern void si_pmu_swreg_init(struct si_pub *sih);
extern u32 si_pmu_measure_alpclk(struct si_pub *sih);
#endif /* _BRCM_PMU_H_ */
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
