From: Arend van Spriel <arend@xxxxxxxxxxxx>
The driver is probed through bcma which provides a device representing
the core. This device is now passed in brcms_c_attach and brcms_b_attach
functions.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx>
Reviewed-by: Alwin Beukers <alwin@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
Signed-off-by: Franky Lin <frankyl@xxxxxxxxxxxx>
---
.../net/wireless/brcm80211/brcmsmac/mac80211_if.c | 4 +--
drivers/net/wireless/brcm80211/brcmsmac/main.c | 31 +++++++++----------
drivers/net/wireless/brcm80211/brcmsmac/pub.h | 6 ++--
3 files changed, 19 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
index 9e07dc4..30ac8b4 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
@@ -1030,9 +1030,7 @@ static struct brcms_info *brcms_attach(struct bcma_device *pdev)
}
/* common load-time initialization */
- wl->wlc = brcms_c_attach((void *)wl, pdev->bus->host_pci->vendor,
- pdev->bus->host_pci->device, unit, false,
- pdev->bus->mmio, pdev->bus->host_pci, &err);
+ wl->wlc = brcms_c_attach((void *)wl, pdev, unit, false, &err);
brcms_release_fw(wl);
if (!wl->wlc) {
wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n",
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index ed8fcb4..d329c90 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -4437,9 +4437,8 @@ struct brcms_pub *brcms_c_pub(struct brcms_c_info *wlc)
* initialize software state for each core and band
* put the whole chip in reset(driver down state), no clock
*/
-static int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device,
- uint unit, bool piomode, void __iomem *regsva,
- struct pci_dev *btparam)
+static int brcms_b_attach(struct brcms_c_info *wlc, struct bcma_device *core,
+ uint unit, bool piomode)
{
struct brcms_hardware *wlc_hw;
struct d11regs __iomem *regs;
@@ -4449,9 +4448,11 @@ static int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device,
bool wme = false;
struct shared_phy_params sha_params;
struct wiphy *wiphy = wlc->wiphy;
+ struct pci_dev *pcidev = core->bus->host_pci;
- BCMMSG(wlc->wiphy, "wl%d: vendor 0x%x device 0x%x\n", unit, vendor,
- device);
+ BCMMSG(wlc->wiphy, "wl%d: vendor 0x%x device 0x%x\n", unit,
+ pcidev->vendor,
+ pcidev->device);
wme = true;
@@ -4468,7 +4469,7 @@ static int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device,
* Do the hardware portion of the attach. Also initialize software
* state that depends on the particular hardware we are running.
*/
- wlc_hw->sih = ai_attach(regsva, btparam);
+ wlc_hw->sih = ai_attach(core->bus->mmio, core->bus->host_pci);
if (wlc_hw->sih == NULL) {
wiphy_err(wiphy, "wl%d: brcms_b_attach: si_attach failed\n",
unit);
@@ -4477,16 +4478,16 @@ static int brcms_b_attach(struct brcms_c_info *wlc, u16 vendor, u16 device,
}
/* verify again the device is supported */
- if (!brcms_c_chipmatch(vendor, device)) {
+ if (!brcms_c_chipmatch(pcidev->vendor, pcidev->device)) {
wiphy_err(wiphy, "wl%d: brcms_b_attach: Unsupported "
"vendor/device (0x%x/0x%x)\n",
- unit, vendor, device);
+ unit, pcidev->vendor, pcidev->device);
err = 12;
goto fail;
}
- wlc_hw->vendorid = vendor;
- wlc_hw->deviceid = device;
+ wlc_hw->vendorid = pcidev->vendor;
+ wlc_hw->deviceid = pcidev->device;
/* set bar0 window to point at D11 core */
wlc_hw->regs = (struct d11regs __iomem *)
@@ -8351,9 +8352,8 @@ void brcms_c_init(struct brcms_c_info *wlc, bool mute_tx)
* The common driver entry routine. Error codes should be unique
*/
struct brcms_c_info *
-brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit,
- bool piomode, void __iomem *regsva, struct pci_dev *btparam,
- uint *perr)
+brcms_c_attach(struct brcms_info *wl, struct bcma_device *core, uint unit,
+ bool piomode, uint *perr)
{
struct brcms_c_info *wlc;
uint err = 0;
@@ -8361,7 +8361,7 @@ brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit,
struct brcms_pub *pub;
/* allocate struct brcms_c_info state and its substructures */
- wlc = (struct brcms_c_info *) brcms_c_attach_malloc(unit, &err, device);
+ wlc = (struct brcms_c_info *) brcms_c_attach_malloc(unit, &err, 0);
if (wlc == NULL)
goto fail;
wlc->wiphy = wl->wiphy;
@@ -8388,8 +8388,7 @@ brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit,
* low level attach steps(all hw accesses go
* inside, no more in rest of the attach)
*/
- err = brcms_b_attach(wlc, vendor, device, unit, piomode, regsva,
- btparam);
+ err = brcms_b_attach(wlc, core, unit, piomode);
if (err)
goto fail;
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pub.h b/drivers/net/wireless/brcm80211/brcmsmac/pub.h
index 21ccf3a..f0038ad 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/pub.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/pub.h
@@ -17,6 +17,7 @@
#ifndef _BRCM_PUB_H_
#define _BRCM_PUB_H_
+#include <linux/bcma/bcma.h>
#include <brcmu_wifi.h>
#include "types.h"
#include "defs.h"
@@ -530,9 +531,8 @@ struct brcms_antselcfg {
/* common functions for every port */
extern struct brcms_c_info *
-brcms_c_attach(struct brcms_info *wl, u16 vendor, u16 device, uint unit,
- bool piomode, void __iomem *regsva, struct pci_dev *btparam,
- uint *perr);
+brcms_c_attach(struct brcms_info *wl, struct bcma_device *core, uint unit,
+ bool piomode, uint *perr);
extern uint brcms_c_detach(struct brcms_c_info *wlc);
extern int brcms_c_up(struct brcms_c_info *wlc);
extern uint brcms_c_down(struct brcms_c_info *wlc);
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
