From: Mohammed Shafi Shajakhan <mohammed@xxxxxxxxxxxxxxxx> the default tx/rx chainmask for AR9462 is 0x3. this patch helps to assign 0x3 rather than 0x7 for AR9462 with the help of fix_chainmask module if something goes wrong in reading tx/rx chain mask from OTP/EEPROM card(though its very unlikely) Signed-off-by: Mohammed Shafi Shajakhan <mohammed@xxxxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath9k/hw.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 8876134..f282dae 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2149,6 +2149,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) if (AR_SREV_9485(ah) || AR_SREV_9285(ah) || AR_SREV_9330(ah)) chip_chainmask = 1; + else if (AR_SREV_9462(ah)) + chip_chainmask = 3; else if (!AR_SREV_9280_20_OR_LATER(ah)) chip_chainmask = 7; else if (!AR_SREV_9300_20_OR_LATER(ah) || AR_SREV_9340(ah)) -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
