Search Linux Wireless

Re: iwlagn is getting very shaky

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Nov 29, 2011 at 10:31, Johannes Berg <johannes@xxxxxxxxxxxxxxxx> wrote:
> I noticed that the logs are a bit odd wrt. timing.
>
>> > Intersperesed I see some other messages that are new to me:
>> > [ 4019.443129] Open BA session requested for 00:0a:79:eb:56:10 tid 0
>> > [ 4019.500149] activated addBA response timer on tid 0
>> > [ 4020.500033] addBA response timer expired on tid 0
>
> I guess the delay here is due to the synchronize_net()? That can take a
> while, 57ms seems a lot but I suppose it's possible.
>
>> > [ 4020.501626] Tx BA session stop requested for 00:0a:79:eb:56:10 tid 0
>> > [ 4023.740570] switched off addBA timer for tid 0
>> > [ 4023.740578] got addBA resp for tid 0 but we already gave up
>>
>> Here is the AP is finally replying
>
> It's kinda hard to believe that the AP took 4 seconds (!) to reply to
> the frame. Where could the frame get stuck? I don't see any other work
> processing happening etc. either. It's also curious that in those 3
> seconds between these messages, we didn't actually get around to
> stopping the session, that only happens just after:

Yeah you are right, didn't look at the timestamps. Not sure you would
see work being processed though.

>
>> > [ 4023.740619] Stopping Tx BA session for 00:0a:79:eb:56:10 tid 0
>
> (here)
>
>> > [ 4023.768544] Open BA session requested for 00:0a:79:eb:56:10 tid 0
>>
>> Here we are trying again
>>
>> > [ 4023.784292] activated addBA response timer on tid 0
>> > [ 4023.786294] switched off addBA timer for tid 0
>
> 20ms response time here, that's much more reasonable.
>
>
> Could something be hogging the workqueues?
>

Frankly, I am seeing issues that seem to point to workqueues too.
Sometimes mac80211 seems just not responsive.
Sometimes I come back to mac80211 for the AGG callback (start or
stop), and it takes ages (5 seconds !) until it actually move to
operationnal / stopped state.

It might that we are holding the mac80211 workqueue in the driver too...
I guess we could try to enable MAC80211 debug flag with timestamps to check.

> johannes
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux