On Mon, Nov 28, 2011 at 06:23, Norbert Preining <preining@xxxxxxxx> wrote: > On Mo, 28 Nov 2011, Emmanuel Grumbach wrote: >> If the problem is solved, then no :-) > > I will report back. I have now reverted all the patches and additions > by stashing them away, and applied only the last patch send. THe only > thing out of default I see is: > [ 1074.038324] wlan0: associated > [ 1076.157989] Rx A-MPDU request on tid 0 result 0 > [ 1098.215008] Open BA session requested for 00:24:c4:ab:bd:ef tid 0 > [ 1098.232249] activated addBA response timer on tid 0 > [ 1098.232861] switched off addBA timer for tid 0 > [ 1098.232868] Aggregation is on for tid 0 > [ 1098.233027] iwlwifi 0000:06:00.0: Tx aggregation enabled on ra = 00:24:c4:ab:bd:ef tid = 0 > but it seems to work smoothly. > > I will report more after a few suspend/resume iteations. > Ok It is a bit odd though since these prints seem to point to a successful flow, while you were likely to experience a problem in the handshake between the AP and your machine. I am basically saying that this log is too good, you didn't get into the corner case that we didn't handle properly. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
