Search Linux Wireless

Wireless stalled after a few minutes with Linux Kernel 3.1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Luis R. Rodriguez and Linux Wifi developers,

Broadcom developer Arend van Spriel advise me to forward this email to
the ATHEROS developers to seek help.

I have attached my dmesg output from Linux 3.0.7 (I am using Arch
Linux 64 bit), the lsmod output for Linux 3.0.7, the lsmod output for
Linux 3.1-4 (the package for Arch Linux.  I believe the `-4' is just
minor changes to configuration and compilation.  I have installed the
`-3' and `-4' and all of the have the stall problem) and the lspci
output.

> Provide hardware info.

I am not sure if the attached files provide enough hardware
information, please advise.

The following is a portion of my wpa_supplicant.conf

   ssid="LINUX-LINK"
   proto=WPA2
   key_mgmt=WPA-PSK
   pairwise=TKIP
   group=TKIP
   wpa_ptk_rekey=600

I didn't realise that `wpa_ptk_rekey=600' will actually change
the wifi key every 10 minutes.  I just copy from the default
wpa_supplicant.conf.  Later I read the description and I found
that it is for the paranoid user who want really secure
connection.  So I remove the wpa_ptk_rekey=600 and the
connection will last longer for ath9k.  Sometimes a
disconnection happened.  I found from Internet that nearby
wifi interference can cause this problem.

This is fine with Linux 3.0.7.   However, during the
wpa_ptk_rekey or during interference, the Linux 3.1 will
stalled.  The only solution for me is to kill wpa_supplicant
and restart it.  I can always produce this phenomena with
Linux 3.1, so I dare not install the Linux 3.1.1 kernel.
I heard that Linux 3.2 has some improvements for ath9k
but it is not available for ArchLinux yet, so I can't inform you
if Linux 3.2 has a similar problem.

I understand that kernel debugging is an extremely
difficult task.  Please advise me on what to do to provide
useful info to you.

Thanks.


Best Regards,
Liao Haohui
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011
[    0.000000] Command line: root=/dev/disk/by-uuid/4d75a383-32b1-479f-92cf-b696e6607cd7 ro i915.modeset=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[    0.000000]  BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000006f681000 (usable)
[    0.000000]  BIOS-e820: 000000006f681000 - 000000006f6bf000 (reserved)
[    0.000000]  BIOS-e820: 000000006f6bf000 - 000000006f735000 (usable)
[    0.000000]  BIOS-e820: 000000006f735000 - 000000006f7bf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000006f7bf000 - 000000006f7e0000 (usable)
[    0.000000]  BIOS-e820: 000000006f7e0000 - 000000006f7ff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000006f7ff000 - 000000006f800000 (usable)
[    0.000000]  BIOS-e820: 000000006f800000 - 000000007c000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1b000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Acer             Aspire 4740     /Aspire 4740     , BIOS V1.04 12/23/2009
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x6f800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   2 base 040000000 mask FC0000000 write-back
[    0.000000]   3 base 070000000 mask FF0000000 uncachable
[    0.000000]   4 base 06F800000 mask FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000006f800000
[    0.000000]  0000000000 - 006f800000 page 2M
[    0.000000] kernel direct mapping tables up to 6f800000 @ 6f7dd000-6f7e0000
[    0.000000] RAMDISK: 37d81000 - 37ff0000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 000000006f7fe120 00084 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 000000006f7fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 000000006f7ec000 0C812 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 000000006f759000 00040
[    0.000000] ACPI: ASF! 000000006f7fd000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: HPET 000000006f7fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 000000006f7fa000 0008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 000000006f7f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: NSLI 000000006f7eb000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT 000000006f7e8000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: ASPT 000000006f7e4000 00034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: WDRT 000000006f7e3000 00047 (v01 ACRSYS ACRPRDCT 00000000 1025 01000013)
[    0.000000] ACPI: SSDT 000000006f7e2000 009F1 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 000000006f7e1000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 000000006f7e0000 0049F (v01  PmRef    ApTst 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000006f800000
[    0.000000] Initmem setup node 0 0000000000000000-000000006f800000
[    0.000000]   NODE_DATA [000000006f7d8000 - 000000006f7dcfff]
[    0.000000]  [ffffea0000000000-ffffea00019fffff] PMD -> [ffff88006d200000-ffff88006ebfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0006f681
[    0.000000]     0: 0x0006f6bf -> 0x0006f735
[    0.000000]     0: 0x0006f7bf -> 0x0006f7e0
[    0.000000]     0: 0x0006f7ff -> 0x0006f800
[    0.000000] On node 0 totalpages: 456358
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6188 pages used for memmap
[    0.000000]   DMA32 zone: 446189 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 000000006f681000 - 000000006f6bf000
[    0.000000] PM: Registered nosave memory: 000000006f735000 - 000000006f7bf000
[    0.000000] PM: Registered nosave memory: 000000006f7e0000 - 000000006f7ff000
[    0.000000] Allocating PCI resources starting at 7c000000 (gap: 7c000000:64000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88006f400000 s78464 r8192 d23936 u262144
[    0.000000] pcpu-alloc: s78464 r8192 d23936 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 450109
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/disk/by-uuid/4d75a383-32b1-479f-92cf-b696e6607cd7 ro i915.modeset=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1785752k/1826816k available (4066k kernel code, 1384k absent, 39680k reserved, 3302k data, 712k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:2304
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 14680064 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.003333] Detected 2260.685 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4523.76 BogoMIPS (lpj=7535616)
[    0.000006] pid_max: default: 32768 minimum: 301
[    0.000101] Security Framework initialized
[    0.000106] AppArmor: AppArmor disabled by boot time parameter
[    0.000289] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000998] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.001305] Mount-cache hash table entries: 256
[    0.001644] Initializing cgroup subsys cpuacct
[    0.001672] Initializing cgroup subsys memory
[    0.001686] Initializing cgroup subsys devices
[    0.001688] Initializing cgroup subsys freezer
[    0.001690] Initializing cgroup subsys net_cls
[    0.001692] Initializing cgroup subsys blkio
[    0.001736] CPU: Physical Processor ID: 0
[    0.001737] CPU: Processor Core ID: 0
[    0.001743] mce: CPU supports 9 MCE banks
[    0.001754] CPU0: Thermal monitoring enabled (TM1)
[    0.001762] using mwait in idle threads.
[    0.002694] ACPI: Core revision 20110413
[    0.176305] ftrace: allocating 16144 entries in 64 pages
[    0.181700] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.214635] CPU0: Intel(R) Core(TM) i5 CPU       M 430  @ 2.27GHz stepping 02
[    0.319671] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[    0.319678] ... version:                3
[    0.319679] ... bit width:              48
[    0.319680] ... generic registers:      4
[    0.319681] ... value mask:             0000ffffffffffff
[    0.319683] ... max period:             000000007fffffff
[    0.319684] ... fixed-purpose events:   3
[    0.319685] ... event mask:             000000070000000f
[    0.339774] NMI watchdog enabled, takes one hw-pmu counter.
[    0.366261] Booting Node   0, Processors  #1
[    0.366265] smpboot cpu 1: start_ip = 98000
[    0.479436] NMI watchdog enabled, takes one hw-pmu counter.
[    0.499347]  #2
[    0.499350] smpboot cpu 2: start_ip = 98000
[    0.612553] NMI watchdog enabled, takes one hw-pmu counter.
[    0.632404]  #3
[    0.632407] smpboot cpu 3: start_ip = 98000
[    0.745609] NMI watchdog enabled, takes one hw-pmu counter.
[    0.752134] Brought up 4 CPUs
[    0.752138] Total of 4 processors activated (18094.42 BogoMIPS).
[    0.754471] devtmpfs: initialized
[    0.755366] PM: Registering ACPI NVS region at 6f735000 (565248 bytes)
[    0.756196] print_constraints: dummy: 
[    0.756267] NET: Registered protocol family 16
[    0.756358] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.756360] ACPI: bus type pci registered
[    0.756502] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.756505] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.791831] PCI: Using configuration type 1 for base access
[    0.792236] bio: create slab <bio-0> at 0
[    0.794209] ACPI: EC: Look up EC in DSDT
[    0.796034] ACPI: Executed 1 blocks of module-level executable AML code
[    0.815390] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.815883] ACPI: SSDT 000000006f691c18 003A0 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.816320] ACPI: Dynamic OEM Table Load:
[    0.816323] ACPI: SSDT           (null) 003A0 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.816466] ACPI: SSDT 000000006f68f618 005CD (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.816890] ACPI: Dynamic OEM Table Load:
[    0.816892] ACPI: SSDT           (null) 005CD (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.835599] ACPI: SSDT 000000006f690a98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.836076] ACPI: Dynamic OEM Table Load:
[    0.836078] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.845450] ACPI: SSDT 000000006f68ed98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.845897] ACPI: Dynamic OEM Table Load:
[    0.845899] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.872098] ACPI: Interpreter enabled
[    0.872101] ACPI: (supports S0 S3 S4 S5)
[    0.872136] ACPI: Using IOAPIC for interrupt routing
[    1.294510] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    1.294684] ACPI: No dock devices found.
[    1.294686] HEST: Table not found.
[    1.294689] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.294995] \_SB_.PCI0:_OSC invalid UUID
[    1.294997] _OSC request data:1 8 1f 
[    1.295000] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    1.295498] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    1.295500] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    1.295502] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    1.295505] pci_root PNP0A08:00: host bridge window [mem 0x7c000000-0xfebfffff]
[    1.295516] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[    1.295533] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    1.295550] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
[    1.295560] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
[    1.295567] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[    1.295571] pci 0000:00:02.0: reg 20: [io  0x3050-0x3057]
[    1.295629] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[    1.295657] pci 0000:00:16.0: reg 10: [mem 0x94406100-0x9440610f 64bit]
[    1.295731] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.295736] pci 0000:00:16.0: PME# disabled
[    1.295775] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[    1.296145] pci 0000:00:1a.0: reg 10: [mem 0x94405c00-0x94405fff]
[    1.298227] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.298232] pci 0000:00:1a.0: PME# disabled
[    1.298261] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[    1.298282] pci 0000:00:1b.0: reg 10: [mem 0x94400000-0x94403fff 64bit]
[    1.298357] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.298362] pci 0000:00:1b.0: PME# disabled
[    1.298388] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[    1.298464] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.298469] pci 0000:00:1c.0: PME# disabled
[    1.298496] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[    1.298573] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    1.298577] pci 0000:00:1c.1: PME# disabled
[    1.298618] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[    1.298975] pci 0000:00:1d.0: reg 10: [mem 0x94405800-0x94405bff]
[    1.301054] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.301059] pci 0000:00:1d.0: PME# disabled
[    1.301088] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    1.301163] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[    1.301281] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[    1.301307] pci 0000:00:1f.2: reg 10: [io  0x3048-0x304f]
[    1.301318] pci 0000:00:1f.2: reg 14: [io  0x305c-0x305f]
[    1.301329] pci 0000:00:1f.2: reg 18: [io  0x3040-0x3047]
[    1.301340] pci 0000:00:1f.2: reg 1c: [io  0x3058-0x305b]
[    1.301351] pci 0000:00:1f.2: reg 20: [io  0x3020-0x303f]
[    1.301362] pci 0000:00:1f.2: reg 24: [mem 0x94405000-0x944057ff]
[    1.301410] pci 0000:00:1f.2: PME# supported from D3hot
[    1.301414] pci 0000:00:1f.2: PME# disabled
[    1.301436] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[    1.301456] pci 0000:00:1f.3: reg 10: [mem 0x94406000-0x944060ff 64bit]
[    1.301485] pci 0000:00:1f.3: reg 20: [io  0x3000-0x301f]
[    1.301531] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[    1.301559] pci 0000:00:1f.6: reg 10: [mem 0x94404000-0x94404fff 64bit]
[    1.301759] pci 0000:01:00.0: [14e4:1692] type 0 class 0x000200
[    1.301801] pci 0000:01:00.0: reg 10: [mem 0x93400000-0x9340ffff 64bit]
[    1.301972] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    1.301980] pci 0000:01:00.0: PME# disabled
[    1.302055] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    1.302060] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.302065] pci 0000:00:1c.0:   bridge window [mem 0x93400000-0x943fffff]
[    1.302072] pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x913fffff 64bit pref]
[    1.302145] pci 0000:02:00.0: [168c:002a] type 0 class 0x000280
[    1.302169] pci 0000:02:00.0: reg 10: [mem 0x92400000-0x9240ffff 64bit]
[    1.302266] pci 0000:02:00.0: supports D1
[    1.302267] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[    1.302272] pci 0000:02:00.0: PME# disabled
[    1.302308] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    1.302312] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    1.302317] pci 0000:00:1c.1:   bridge window [mem 0x92400000-0x933fffff]
[    1.302324] pci 0000:00:1c.1:   bridge window [mem 0x91400000-0x923fffff 64bit pref]
[    1.302397] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[    1.302402] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
[    1.302407] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
[    1.302415] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[    1.302417] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    1.302419] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    1.302421] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    1.302423] pci 0000:00:1e.0:   bridge window [mem 0x7c000000-0xfebfffff] (subtractive decode)
[    1.302444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.302606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    1.302666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.302694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.302766] \_SB_.PCI0:_OSC invalid UUID
[    1.302767] _OSC request data:1 1f 1f 
[    1.302770]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.302799] \_SB_.PCI0:_OSC invalid UUID
[    1.302800] _OSC request data:1 0 1d 
[    1.302803]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    1.302805] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.306640] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[    1.306674] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[    1.306693] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[    1.306711] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[    1.306727] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[    1.306742] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[    1.306757] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[    1.306786]  pci0000:ff: Requesting ACPI _OSC control (0x1d)
[    1.306788]  pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    1.306790] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.306983] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    1.307023] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.307060] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.307097] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[    1.307136] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    1.307174] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    1.307212] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[    1.307249] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    1.307334] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.307341] vgaarb: loaded
[    1.307342] vgaarb: bridge control possible 0000:00:02.0
[    1.307404] PCI: Using ACPI for IRQ routing
[    1.317246] PCI: pci_cache_line_size set to 64 bytes
[    1.317313] reserve RAM buffer: 000000000009d000 - 000000000009ffff 
[    1.317316] reserve RAM buffer: 000000006f681000 - 000000006fffffff 
[    1.317318] reserve RAM buffer: 000000006f735000 - 000000006fffffff 
[    1.317320] reserve RAM buffer: 000000006f7e0000 - 000000006fffffff 
[    1.317322] reserve RAM buffer: 000000006f800000 - 000000006fffffff 
[    1.317435] NetLabel: Initializing
[    1.317437] NetLabel:  domain hash size = 128
[    1.317438] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.317450] NetLabel:  unlabeled traffic allowed by default
[    1.317472] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.317478] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.319492] Switching to clocksource hpet
[    1.320992] Switched to NOHz mode on CPU #0
[    1.321047] Switched to NOHz mode on CPU #1
[    1.321101] Switched to NOHz mode on CPU #3
[    1.321110] Switched to NOHz mode on CPU #2
[    1.324532] pnp: PnP ACPI init
[    1.324549] ACPI: bus type pnp registered
[    1.324852] pnp 00:00: [bus 00-fe]
[    1.324854] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.324856] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.324858] pnp 00:00: [io  0x0d00-0xffff window]
[    1.324860] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.324861] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.324863] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.324865] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.324866] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.324868] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.324870] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.324871] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.324873] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.324875] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.324876] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.324878] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.324879] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.324883] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.324885] pnp 00:00: [mem 0x7c000000-0xfebfffff window]
[    1.324886] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.324959] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.522565] pnp 00:01: [io  0x0000-0x001f]
[    1.522569] pnp 00:01: [io  0x0081-0x0091]
[    1.522572] pnp 00:01: [io  0x0093-0x009f]
[    1.522575] pnp 00:01: [io  0x00c0-0x00df]
[    1.522579] pnp 00:01: [dma 4]
[    1.522632] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.522639] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.522659] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.522753] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.522778] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.522787] pnp 00:04: [io  0x00f0]
[    1.522798] pnp 00:04: [irq 13]
[    1.522818] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.522828] pnp 00:05: [io  0x002e-0x002f]
[    1.522829] pnp 00:05: [io  0x004e-0x004f]
[    1.522831] pnp 00:05: [io  0x0061]
[    1.522832] pnp 00:05: [io  0x0063]
[    1.522834] pnp 00:05: [io  0x0065]
[    1.522835] pnp 00:05: [io  0x0067]
[    1.522836] pnp 00:05: [io  0x0068]
[    1.522838] pnp 00:05: [io  0x006c]
[    1.522839] pnp 00:05: [io  0x0070]
[    1.522840] pnp 00:05: [io  0x0080]
[    1.522841] pnp 00:05: [io  0x0092]
[    1.522843] pnp 00:05: [io  0x00b2-0x00b3]
[    1.522844] pnp 00:05: [io  0x0680-0x069f]
[    1.522846] pnp 00:05: [io  0xff2c-0xff2f]
[    1.522847] pnp 00:05: [io  0x0800-0x080f]
[    1.522848] pnp 00:05: [io  0xffff]
[    1.522850] pnp 00:05: [io  0xffff]
[    1.522851] pnp 00:05: [io  0x0400-0x047f]
[    1.522852] pnp 00:05: [io  0x0500-0x057f]
[    1.522854] pnp 00:05: [io  0x164e-0x164f]
[    1.522866] pnp 00:05: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io  0x1000-0x1fff]
[    1.522905] system 00:05: [io  0x0680-0x069f] has been reserved
[    1.522908] system 00:05: [io  0xff2c-0xff2f] has been reserved
[    1.522910] system 00:05: [io  0x0800-0x080f] has been reserved
[    1.522912] system 00:05: [io  0xffff] has been reserved
[    1.522914] system 00:05: [io  0xffff] has been reserved
[    1.522916] system 00:05: [io  0x0400-0x047f] has been reserved
[    1.522918] system 00:05: [io  0x0500-0x057f] has been reserved
[    1.522921] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.522928] pnp 00:06: [io  0x0070-0x0077]
[    1.522934] pnp 00:06: [irq 8]
[    1.522957] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.522976] pnp 00:07: [io  0x0060]
[    1.522978] pnp 00:07: [io  0x0064]
[    1.522983] pnp 00:07: [irq 1]
[    1.523005] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.523043] pnp 00:08: [irq 12]
[    1.523070] pnp 00:08: Plug and Play ACPI device, IDs SYN1b16 SYN1b00 SYN0002 PNP0f13 (active)
[    1.523321] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[    1.523323] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[    1.523325] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[    1.523326] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[    1.523328] pnp 00:09: [mem 0xe0000000-0xefffffff]
[    1.523329] pnp 00:09: [mem 0x7c000000-0x7c000fff]
[    1.523331] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[    1.523334] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[    1.523336] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[    1.523338] pnp 00:09: [mem 0xff000000-0xffffffff]
[    1.523339] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[    1.523389] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.523391] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[    1.523393] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.523395] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.523398] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    1.523400] system 00:09: [mem 0x7c000000-0x7c000fff] has been reserved
[    1.523402] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.523404] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.523407] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[    1.523409] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.523412] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.523503] pnp 00:0a: [bus ff]
[    1.523538] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[    1.523551] pnp: PnP ACPI: found 11 devices
[    1.523552] ACPI: ACPI bus type pnp unregistered
[    1.529375] PCI: max bus depth: 1 pci_try_num: 2
[    1.529409] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    1.529413] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.529419] pci 0000:00:1c.0:   bridge window [mem 0x93400000-0x943fffff]
[    1.529424] pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x913fffff 64bit pref]
[    1.529432] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    1.529436] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    1.529442] pci 0000:00:1c.1:   bridge window [mem 0x92400000-0x933fffff]
[    1.529446] pci 0000:00:1c.1:   bridge window [mem 0x91400000-0x923fffff 64bit pref]
[    1.529454] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[    1.529456] pci 0000:00:1e.0:   bridge window [io  disabled]
[    1.529462] pci 0000:00:1e.0:   bridge window [mem disabled]
[    1.529466] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    1.529486] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.529491] pci 0000:00:1c.0: setting latency timer to 64
[    1.529501] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    1.529505] pci 0000:00:1c.1: setting latency timer to 64
[    1.529514] pci 0000:00:1e.0: setting latency timer to 64
[    1.529518] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.529520] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.529522] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.529524] pci_bus 0000:00: resource 7 [mem 0x7c000000-0xfebfffff]
[    1.529526] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    1.529527] pci_bus 0000:01: resource 1 [mem 0x93400000-0x943fffff]
[    1.529529] pci_bus 0000:01: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
[    1.529531] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    1.529533] pci_bus 0000:02: resource 1 [mem 0x92400000-0x933fffff]
[    1.529535] pci_bus 0000:02: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
[    1.529537] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    1.529539] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    1.529541] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    1.529543] pci_bus 0000:03: resource 7 [mem 0x7c000000-0xfebfffff]
[    1.529607] NET: Registered protocol family 2
[    1.529737] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    1.530275] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    1.531575] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.531877] TCP: Hash tables configured (established 262144 bind 65536)
[    1.531879] TCP reno registered
[    1.531888] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    1.531906] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    1.532141] NET: Registered protocol family 1
[    1.532159] pci 0000:00:02.0: Boot video device
[    1.555825] PCI: CLS 64 bytes, default 64
[    1.555889] Unpacking initramfs...
[    1.585017] Freeing initrd memory: 2492k freed
[    1.585493] Simple Boot Flag at 0x44 set to 0x1
[    1.585939] audit: initializing netlink socket (disabled)
[    1.585950] type=2000 audit(1322142286.273:1): initialized
[    1.590017] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.598416] VFS: Disk quotas dquot_6.5.2
[    1.598536] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.598681] msgmni has been set to 3492
[    1.598890] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.598928] io scheduler noop registered
[    1.598930] io scheduler deadline registered
[    1.598970] io scheduler cfq registered (default)
[    1.599271] intel_idle: MWAIT substates: 0x1120
[    1.599272] intel_idle: v0.4 model 0x25
[    1.599274] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.599315] ERST: Table is not found!
[    1.599377] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.825535] Linux agpgart interface v0.103
[    1.825601] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    1.842339] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.842366] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.842432] mousedev: PS/2 mouse device common for all mice
[    1.845125] rtc_cmos 00:06: RTC can wake from S4
[    1.845254] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    1.845283] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    1.845368] cpuidle: using governor ladder
[    1.845492] cpuidle: using governor menu
[    1.845673] TCP cubic registered
[    1.845675] NET: Registered protocol family 17
[    1.845683] Registering the dns_resolver key type
[    1.845764] PM: Hibernation image not present or could not be loaded.
[    1.845768] registered taskstats version 1
[    1.849642] rtc_cmos 00:06: setting system clock to 2011-11-24 13:44:46 UTC (1322142286)
[    1.849693] Initializing network drop monitor service
[    1.851011] Freeing unused kernel memory: 712k freed
[    1.851135] Write protecting the kernel read-only data: 6144k
[    1.851400] Freeing unused kernel memory: 12k freed
[    1.853701] Freeing unused kernel memory: 776k freed
[    1.862941] udevd[44]: starting version 175
[    1.864596] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.865418] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    1.865549] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.866500] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[    1.866747] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[    1.869653] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/PNP0C0C:00/input/input1
[    1.869667] ACPI: Power Button [PWRB]
[    1.869856] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/PNP0C0D:00/input/input2
[    1.869935] ACPI: Lid Switch [LID0]
[    1.870084] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/PNP0C0E:00/input/input3
[    1.870088] ACPI: Sleep Button [SLPB]
[    1.870172] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.870178] ACPI: Power Button [PWRF]
[    1.875713] [drm] Initialized drm 1.1.0 20060810
[    1.895679] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.895687] i915 0000:00:02.0: setting latency timer to 64
[    1.984319] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[    1.984328] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.984330] [drm] Driver supports precise vblank timestamp query.
[    1.984475] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.244489] fbcon: inteldrmfb (fb0) is primary device
[    2.410685] Console: switching to colour frame buffer device 170x48
[    2.415534] fb0: inteldrmfb frame buffer device
[    2.415537] drm: registered panic notifier
[    2.583784] Refined TSC clocksource calibration: 2260.896 MHz.
[    2.583791] Switching to clocksource tsc
[    2.913151] acpi device:03: registered as cooling_device0
[    2.913472] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    2.913480] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[    2.913540] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.961429] usbcore: registered new interface driver usbfs
[    2.961451] usbcore: registered new interface driver hub
[    2.962067] usbcore: registered new device driver usb
[    2.963552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.963591] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.963618] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.963623] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    2.963676] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.963714] ehci_hcd 0000:00:1a.0: debug port 2
[    2.968446] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    2.968474] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x94405c00
[    2.971770] SCSI subsystem initialized
[    2.978450] libata version 3.00 loaded.
[    2.982878] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.983225] hub 1-0:1.0: USB hub found
[    2.983233] hub 1-0:1.0: 3 ports detected
[    2.983666] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.983695] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.983700] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    2.983713] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.983750] ehci_hcd 0000:00:1d.0: debug port 2
[    2.987691] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    2.987712] ehci_hcd 0000:00:1d.0: irq 23, io mem 0x94405800
[    2.999638] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.999858] hub 2-0:1.0: USB hub found
[    2.999864] hub 2-0:1.0: 3 ports detected
[    2.999977] ahci 0000:00:1f.2: version 3.0
[    3.000000] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.000063] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[    3.000097] ahci: SSS flag set, parallel bus scan disabled
[    3.000135] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    3.000139] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst 
[    3.000145] ahci 0000:00:1f.2: setting latency timer to 64
[    3.006651] scsi0 : ahci
[    3.006832] scsi1 : ahci
[    3.006968] scsi2 : ahci
[    3.007074] scsi3 : ahci
[    3.007160] ata1: SATA max UDMA/133 abar m2048@0x94405000 port 0x94405100 irq 41
[    3.007166] ata2: SATA max UDMA/133 abar m2048@0x94405000 port 0x94405180 irq 41
[    3.007169] ata3: DUMMY
[    3.007171] ata4: DUMMY
[    3.288998] usb 1-1: new high speed USB device number 2 using ehci_hcd
[    3.328922] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.330211] ata1.00: ATA-8: WDC WD3200BEVT-22A23T0, 01.01A01, max UDMA/133
[    3.330216] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    3.331625] ata1.00: configured for UDMA/133
[    3.331868] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-2 01.0 PQ: 0 ANSI: 5
[    3.412965] hub 1-1:1.0: USB hub found
[    3.413142] hub 1-1:1.0: 6 ports detected
[    3.518542] usb 2-1: new high speed USB device number 2 using ehci_hcd
[    3.642389] hub 2-1:1.0: USB hub found
[    3.642542] hub 2-1:1.0: 8 ports detected
[    3.648290] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.650131] ata2.00: ATAPI: MATSHITADVD-RAM UJ890AS, 1.00, max UDMA/100
[    3.652961] ata2.00: configured for UDMA/100
[    3.666852] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ890AS  1.00 PQ: 0 ANSI: 5
[    3.673012] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    3.673070] sd 0:0:0:0: [sda] Write Protect is off
[    3.673072] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.673085] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.675357] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.675362] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.675542] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.907949] usb 2-1.4: new high speed USB device number 3 using ehci_hcd
[    3.923317]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 >
[    3.923907] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.687165] EXT3-fs: barriers not enabled
[    7.700592] kjournald starting.  Commit interval 5 seconds
[    7.700702] EXT3-fs (sda6): mounted filesystem with ordered data mode
[    9.607499] udevd[244]: starting version 175
[   10.099084] wmi: Mapper loaded
[   10.119729] ACPI: acpi_idle yielding to intel_idle
[   10.326742] input: PC Speaker as /devices/platform/pcspkr/input/input6
[   10.361423] iTCO_vendor_support: vendor-support=0
[   10.397596] mei: module is from the staging directory, the quality is unknown, you have been warned.
[   10.397814] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.397822] mei 0000:00:16.0: setting latency timer to 64
[   10.474767] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[   10.474800] intel ips 0000:00:1f.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   10.475039] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[   10.575517] cfg80211: Calling CRDA to update world regulatory domain
[   10.614676] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[   11.073310] ACPI: AC Adapter [AC] (on-line)
[   11.272770] ACPI: Battery Slot [BAT0] (battery absent)
[   11.377612] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[   11.377693] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[   11.377755] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   11.653242] Linux media interface: v0.10
[   11.683056] tg3.c:v3.119 (May 18, 2011)
[   11.683073] tg3 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.683083] tg3 0000:01:00.0: setting latency timer to 64
[   11.739204] acer_wmi: Acer Laptop ACPI-WMI Extras
[   11.739851] acer_wmi: Brightness must be controlled by generic video driver
[   11.749210] Linux video capture interface: v2.00
[   11.975530] uvcvideo: Found UVC 1.00 device Video WebCam (064e:a103)
[   11.992296] input: Video WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input7
[   11.992345] usbcore: registered new interface driver uvcvideo
[   11.992347] USB Video Class driver (v1.1.0)
[   11.997450] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.997528] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[   11.997570] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   12.020404] tg3 mdio bus: probed
[   12.027552] tg3 0000:01:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 70:5a:b6:10:2b:38
[   12.027555] tg3 0000:01:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=100:01)
[   12.027558] tg3 0000:01:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   12.027560] tg3 0000:01:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   12.155059] hda_codec: ALC888: BIOS auto-probing.
[   12.156382] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[   12.531187] HDMI status: Pin=4 Presence_Detect=0 ELD_Valid=0
[   12.534524] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   12.534603] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   12.897453] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[   12.976567] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[   13.061858] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   13.061870] ath9k 0000:02:00.0: setting latency timer to 64
[   13.491744] ath: EEPROM regdomain: 0x65
[   13.491748] ath: EEPROM indicates we should expect a direct regpair map
[   13.491753] ath: Country alpha2 being used: 00
[   13.491756] ath: Regpair used: 0x65
[   13.551698] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[   13.552166] Registered led device: ath9k-phy0
[   13.552187] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc90021a20000, irq=17
[  174.880759] EXT3-fs (sda6): using internal journal
[  175.135291] EXT3-fs: barriers not enabled
[  175.147263] kjournald starting.  Commit interval 5 seconds
[  175.147628] EXT3-fs (sda7): using internal journal
[  175.147634] EXT3-fs (sda7): mounted filesystem with ordered data mode
[  175.186298] EXT3-fs: barriers not enabled
[  175.186757] kjournald starting.  Commit interval 5 seconds
[  175.187207] EXT3-fs (sda8): using internal journal
[  175.187213] EXT3-fs (sda8): mounted filesystem with ordered data mode
[  175.238886] Adding 1959892k swap on /dev/sda5.  Priority:-1 extents:1 across:1959892k 
[  214.022499] wlan0: direct probe to f4:3f:61:06:22:21 (try 1/3)
[  214.025137] wlan0: direct probe responded
[  214.064269] wlan0: authenticate with f4:3f:61:06:22:21 (try 1)
[  214.066640] wlan0: authenticated
[  214.066678] wlan0: associate with f4:3f:61:06:22:21 (try 1)
[  214.069473] wlan0: RX AssocResp from f4:3f:61:06:22:21 (capab=0x411 status=0 aid=1)
[  214.069478] wlan0: associated
[  266.424814] process `skype' is using obsolete setsockopt SO_BSDCOMPAT

Attachment: linux-3.0.mod
Description: Binary data

Attachment: linux-3.1.mod
Description: Binary data

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01)
02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux