According to documentation higher DCUs have higher priority and should
be used for beacons and CAB traffic. More specifically DCU 9 should be
used for beacons and DCU 8 for CAB traffic, I assumed DCU 7 should be
OK for UAPSD traffic.
Note that DCU 8 and 9 are special because they can only be mapped to a single
QCU each but since we use a 1:1 mapping between QCUs and DCUs anyway we don't
have to change much.
P.S. I also did a few related cleanups on qcu.c and ath5k.h
Signed-off-by: Nick Kossifidis <mickflemm@xxxxxxxxx>
---
drivers/net/wireless/ath/ath5k/ath5k.h | 10 ++++------
drivers/net/wireless/ath/ath5k/qcu.c | 14 +++++++-------
2 files changed, 11 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index c3815f7..e564e58 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -571,20 +571,18 @@ enum ath5k_tx_queue_subtype {
* @AR5K_TX_QUEUE_ID_CAB: Content after beacon queue
* @AR5K_TX_QUEUE_ID_BEACON: Beacon queue
* @AR5K_TX_QUEUE_ID_UAPSD: Urgent Automatic Power Save Delivery,
- * @AR5K_TX_QUEUE_ID_XR_DATA: XR Data queue
*
* Each number represents a hw queue. If hw does not support hw queues
- * (eg 5210) all data goes in one queue. These match
- * mac80211 definitions.
+ * (eg 5210) all data goes in one queue.
*/
enum ath5k_tx_queue_id {
AR5K_TX_QUEUE_ID_NOQCU_DATA = 0,
AR5K_TX_QUEUE_ID_NOQCU_BEACON = 1,
AR5K_TX_QUEUE_ID_DATA_MIN = 0,
AR5K_TX_QUEUE_ID_DATA_MAX = 3,
- AR5K_TX_QUEUE_ID_CAB = 6,
- AR5K_TX_QUEUE_ID_BEACON = 7,
- AR5K_TX_QUEUE_ID_UAPSD = 8,
+ AR5K_TX_QUEUE_ID_UAPSD = 7,
+ AR5K_TX_QUEUE_ID_CAB = 8,
+ AR5K_TX_QUEUE_ID_BEACON = 9,
};
/*
diff --git a/drivers/net/wireless/ath/ath5k/qcu.c b/drivers/net/wireless/ath/ath5k/qcu.c
index 31924c3..e50e64d 100644
--- a/drivers/net/wireless/ath/ath5k/qcu.c
+++ b/drivers/net/wireless/ath/ath5k/qcu.c
@@ -54,7 +54,7 @@ Queue Control Unit, DCF Control Unit Functions
/**
* ath5k_hw_num_tx_pending() - Get number of pending frames for a given queue
* @ah: The &struct ath5k_hw
- * @queue: The hw queue number
+ * @queue: One of enum ath5k_tx_queue_id
*/
u32
ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
@@ -85,7 +85,7 @@ ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
/**
* ath5k_hw_release_tx_queue() - Set a transmit queue inactive
* @ah: The &struct ath5k_hw
- * @queue: The hw queue number
+ * @queue: One of enum ath5k_tx_queue_id
*/
void
ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue)
@@ -120,7 +120,7 @@ ath5k_cw_validate(u16 cw_req)
/**
* ath5k_hw_get_tx_queueprops() - Get properties for a transmit queue
* @ah: The &struct ath5k_hw
- * @queue: The hw queue number
+ * @queue: One of enum ath5k_tx_queue_id
* @queue_info: The &struct ath5k_txq_info to fill
*/
int
@@ -134,7 +134,7 @@ ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
/**
* ath5k_hw_set_tx_queueprops() - Set properties for a transmit queue
* @ah: The &struct ath5k_hw
- * @queue: The hw queue number
+ * @queue: One of enum ath5k_tx_queue_id
* @qinfo: The &struct ath5k_txq_info to use
*
* Returns 0 on success or -EIO if queue is inactive
@@ -267,7 +267,7 @@ ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
/**
* ath5k_hw_set_tx_retry_limits() - Set tx retry limits on DCU
* @ah: The &struct ath5k_hw
- * @queue: The hw queue number
+ * @queue: One of enum ath5k_tx_queue_id
*
* This function is used when initializing a queue, to set
* retry limits based on ah->ah_retry_* and the chipset used.
@@ -310,9 +310,9 @@ ath5k_hw_set_tx_retry_limits(struct ath5k_hw *ah,
/**
* ath5k_hw_reset_tx_queue() - Initialize a single hw queue
* @ah: The &struct ath5k_hw
- * @queue: The hw queue number
+ * @queue: One of enum ath5k_tx_queue_id
*
- * Set DFS properties for the given transmit queue on DCU
+ * Set DCF properties for the given transmit queue on DCU
* and configures all queue-specific parameters.
*/
int
--
1.7.8.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
