Previously BlockAcks were always dropped by the rt2800 hardware while BlockAckReqs were always accepted. However, both are only useful on monitor interfaces at the moment and both are control frames. So pass them up when mac80211 sets FIF_CONTROL. Signed-off-by: Helmut Schaa <helmut.schaa@xxxxxxxxxxxxxx> --- drivers/net/wireless/rt2x00/rt2800lib.c | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 1ba079d..e5df380 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1203,8 +1203,10 @@ void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, !(filter_flags & FIF_CONTROL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, !(filter_flags & FIF_PSPOLL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 1); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, 0); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, + !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, + !(filter_flags & FIF_CONTROL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, !(filter_flags & FIF_CONTROL)); rt2800_register_write(rt2x00dev, RX_FILTER_CFG, reg); -- 1.7.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
