Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx> --- drivers/net/wireless/iwlegacy/4965-mac.c | 96 +++++++------- drivers/net/wireless/iwlegacy/4965.c | 2 +- drivers/net/wireless/iwlegacy/common.h | 2 +- drivers/net/wireless/iwlegacy/iwl-fh.h | 206 +++++++++++++++--------------- 4 files changed, 153 insertions(+), 153 deletions(-) diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 82b6a7b..9e3f74c 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -138,22 +138,22 @@ int il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq) u32 rb_timeout = 0; if (il->cfg->mod_params->amsdu_size_8K) - rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; + rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K; else - rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; + rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K; /* Stop Rx DMA */ - il_wr(il, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); + il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0); /* Reset driver's Rx queue write idx */ - il_wr(il, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); + il_wr(il, FH49_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); /* Tell device where to find RBD circular buffer in DRAM */ - il_wr(il, FH_RSCSR_CHNL0_RBDCB_BASE_REG, + il_wr(il, FH49_RSCSR_CHNL0_RBDCB_BASE_REG, (u32)(rxq->bd_dma >> 8)); /* Tell device where in DRAM to update its Rx status */ - il_wr(il, FH_RSCSR_CHNL0_STTS_WPTR_REG, + il_wr(il, FH49_RSCSR_CHNL0_STTS_WPTR_REG, rxq->rb_stts_dma >> 4); /* Enable Rx DMA @@ -162,13 +162,13 @@ int il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq) * RB timeout 0x10 * 256 RBDs */ - il_wr(il, FH_MEM_RCSR_CHNL0_CONFIG_REG, - FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | - FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | - FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK | + il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, + FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL | + FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL | + FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK | rb_size| - (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)| - (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); + (rb_timeout << FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)| + (rfdnlog << FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS)); /* Set interrupt coalescing timer to default (2048 usecs) */ il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_TIMEOUT_DEF); @@ -443,9 +443,9 @@ int il4965_rxq_stop(struct il_priv *il) { /* stop Rx DMA */ - il_wr(il, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); - il_poll_bit(il, FH_MEM_RSSR_RX_STATUS_REG, - FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000); + il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0); + il_poll_bit(il, FH49_MEM_RSSR_RX_STATUS_REG, + FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000); return 0; } @@ -1180,15 +1180,15 @@ u8 il4965_toggle_tx_ant(struct il_priv *il, u8 ant, u8 valid) static const char *il4965_get_fh_string(int cmd) { switch (cmd) { - IL_CMD(FH_RSCSR_CHNL0_STTS_WPTR_REG); - IL_CMD(FH_RSCSR_CHNL0_RBDCB_BASE_REG); - IL_CMD(FH_RSCSR_CHNL0_WPTR); - IL_CMD(FH_MEM_RCSR_CHNL0_CONFIG_REG); - IL_CMD(FH_MEM_RSSR_SHARED_CTRL_REG); - IL_CMD(FH_MEM_RSSR_RX_STATUS_REG); - IL_CMD(FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV); - IL_CMD(FH_TSSR_TX_STATUS_REG); - IL_CMD(FH_TSSR_TX_ERROR_REG); + IL_CMD(FH49_RSCSR_CHNL0_STTS_WPTR_REG); + IL_CMD(FH49_RSCSR_CHNL0_RBDCB_BASE_REG); + IL_CMD(FH49_RSCSR_CHNL0_WPTR); + IL_CMD(FH49_MEM_RCSR_CHNL0_CONFIG_REG); + IL_CMD(FH49_MEM_RSSR_SHARED_CTRL_REG); + IL_CMD(FH49_MEM_RSSR_RX_STATUS_REG); + IL_CMD(FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV); + IL_CMD(FH49_TSSR_TX_STATUS_REG); + IL_CMD(FH49_TSSR_TX_ERROR_REG); default: return "UNKNOWN"; } @@ -1202,15 +1202,15 @@ int il4965_dump_fh(struct il_priv *il, char **buf, bool display) size_t bufsz = 0; #endif static const u32 fh_tbl[] = { - FH_RSCSR_CHNL0_STTS_WPTR_REG, - FH_RSCSR_CHNL0_RBDCB_BASE_REG, - FH_RSCSR_CHNL0_WPTR, - FH_MEM_RCSR_CHNL0_CONFIG_REG, - FH_MEM_RSSR_SHARED_CTRL_REG, - FH_MEM_RSSR_RX_STATUS_REG, - FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV, - FH_TSSR_TX_STATUS_REG, - FH_TSSR_TX_ERROR_REG + FH49_RSCSR_CHNL0_STTS_WPTR_REG, + FH49_RSCSR_CHNL0_RBDCB_BASE_REG, + FH49_RSCSR_CHNL0_WPTR, + FH49_MEM_RCSR_CHNL0_CONFIG_REG, + FH49_MEM_RSSR_SHARED_CTRL_REG, + FH49_MEM_RSSR_RX_STATUS_REG, + FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV, + FH49_TSSR_TX_STATUS_REG, + FH49_TSSR_TX_ERROR_REG }; #ifdef CONFIG_IWLEGACY_DEBUG if (display) { @@ -2010,7 +2010,7 @@ int il4965_txq_ctx_alloc(struct il_priv *il) il4965_txq_set_sched(il, 0); /* Tell NIC where to find the "keep warm" buffer */ - il_wr(il, FH_KW_MEM_ADDR_REG, il->kw.dma >> 4); + il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4); spin_unlock_irqrestore(&il->lock, flags); @@ -2049,7 +2049,7 @@ void il4965_txq_ctx_reset(struct il_priv *il) il4965_txq_set_sched(il, 0); /* Tell NIC where to find the "keep warm" buffer */ - il_wr(il, FH_KW_MEM_ADDR_REG, il->kw.dma >> 4); + il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4); spin_unlock_irqrestore(&il->lock, flags); @@ -2078,14 +2078,14 @@ void il4965_txq_ctx_stop(struct il_priv *il) /* Stop each Tx DMA channel, and wait for it to be idle */ for (ch = 0; ch < il->hw_params.dma_chnl_num; ch++) { il_wr(il, - FH_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0); - if (il_poll_bit(il, FH_TSSR_TX_STATUS_REG, - FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch), + FH49_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0); + if (il_poll_bit(il, FH49_TSSR_TX_STATUS_REG, + FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch), 1000)) IL_ERR("Failing on timeout while stopping" " DMA channel %d [0x%08x]", ch, il_rd(il, - FH_TSSR_TX_STATUS_REG)); + FH49_TSSR_TX_STATUS_REG)); } spin_unlock_irqrestore(&il->lock, flags); @@ -3743,7 +3743,7 @@ int il4965_hw_tx_queue_init(struct il_priv *il, int txq_id = txq->q.id; /* Circular buffer (TFD queue in DRAM) physical base address */ - il_wr(il, FH_MEM_CBBC_QUEUE(txq_id), + il_wr(il, FH49_MEM_CBBC_QUEUE(txq_id), txq->q.dma_addr >> 8); return 0; @@ -4262,7 +4262,7 @@ static void il4965_irq_tasklet(struct il_priv *il) if (inta & ~(il->inta_mask)) { IL_WARN("Disabled INTA bits 0x%08x were pending\n", inta & ~il->inta_mask); - IL_WARN(" with FH_INT = 0x%08x\n", inta_fh); + IL_WARN(" with FH49_INT = 0x%08x\n", inta_fh); } /* Re-enable all interrupts */ @@ -4798,7 +4798,7 @@ static const char * const desc_lookup_text[] = { "HW_ERROR_TEMPERATURE", "ILLEGAL_CHAN_FREQ", "VCC_NOT_STBL", - "FH_ERROR", + "FH49_ERROR", "NMI_INTERRUPT_HOST", "NMI_INTERRUPT_ACTION_PT", "NMI_INTERRUPT_UNKNOWN", @@ -4969,14 +4969,14 @@ static int il4965_alive_notify(struct il_priv *il) /* Enable DMA channel */ for (chan = 0; chan < FH49_TCSR_CHNL_NUM ; chan++) il_wr(il, - FH_TCSR_CHNL_TX_CONFIG_REG(chan), - FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | - FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); + FH49_TCSR_CHNL_TX_CONFIG_REG(chan), + FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | + FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE); /* Update FH chicken bits */ - reg_val = il_rd(il, FH_TX_CHICKEN_BITS_REG); - il_wr(il, FH_TX_CHICKEN_BITS_REG, - reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN); + reg_val = il_rd(il, FH49_TX_CHICKEN_BITS_REG); + il_wr(il, FH49_TX_CHICKEN_BITS_REG, + reg_val | FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN); /* Disable chain mode for all queues */ il_wr_prph(il, IL49_SCD_QUEUECHAIN_SEL, 0); diff --git a/drivers/net/wireless/iwlegacy/4965.c b/drivers/net/wireless/iwlegacy/4965.c index 4b97717..cbbb2c0 100644 --- a/drivers/net/wireless/iwlegacy/4965.c +++ b/drivers/net/wireless/iwlegacy/4965.c @@ -630,7 +630,7 @@ static int il4965_hw_set_hw_params(struct il_priv *il) il->hw_params.max_bsm_size = BSM_SRAM_SIZE; il->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ); - il->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR; + il->hw_params.rx_wrt_ptr_reg = FH49_RSCSR_CHNL0_WPTR; il->hw_params.tx_chains_num = il4965_num_of_ant(il->cfg->valid_tx_ant); il->hw_params.rx_chains_num = il4965_num_of_ant(il->cfg->valid_rx_ant); diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h index 8ae4e3f..be057aa 100644 --- a/drivers/net/wireless/iwlegacy/common.h +++ b/drivers/net/wireless/iwlegacy/common.h @@ -2835,7 +2835,7 @@ struct il_tfd_tb { * contiguous 256 TFDs x 128 bytes-per-TFD = 32 KBytes * * Driver must indicate the physical address of the base of each - * circular buffer via the FH_MEM_CBBC_QUEUE registers. + * circular buffer via the FH49_MEM_CBBC_QUEUE registers. * * Each TFD contains pointer/size information for up to 20 data buffers * in host DRAM. These buffers collectively contain the (one) frame described diff --git a/drivers/net/wireless/iwlegacy/iwl-fh.h b/drivers/net/wireless/iwlegacy/iwl-fh.h index 7846bae..ac7c212 100644 --- a/drivers/net/wireless/iwlegacy/iwl-fh.h +++ b/drivers/net/wireless/iwlegacy/iwl-fh.h @@ -71,8 +71,8 @@ * This I/O area is directly read/writable by driver (e.g. Linux uses writel()) * Addresses are offsets from device's PCI hardware base address. */ -#define FH_MEM_LOWER_BOUND (0x1000) -#define FH_MEM_UPPER_BOUND (0x2000) +#define FH49_MEM_LOWER_BOUND (0x1000) +#define FH49_MEM_UPPER_BOUND (0x2000) /** * Keep-Warm (KW) buffer base address. @@ -83,7 +83,7 @@ * from going into a power-savings mode that would cause higher DRAM latency, * and possible data over/under-runs, before all Tx/Rx is complete. * - * Driver loads FH_KW_MEM_ADDR_REG with the physical address (bits 35:4) + * Driver loads FH49_KW_MEM_ADDR_REG with the physical address (bits 35:4) * of the buffer, which must be 4K aligned. Once this is set up, the 4965 * automatically invokes keep-warm accesses when normal accesses might not * be sufficient to maintain fast DRAM response. @@ -91,7 +91,7 @@ * Bit fields: * 31-0: Keep-warm buffer physical base address [35:4], must be 4K aligned */ -#define FH_KW_MEM_ADDR_REG (FH_MEM_LOWER_BOUND + 0x97C) +#define FH49_KW_MEM_ADDR_REG (FH49_MEM_LOWER_BOUND + 0x97C) /** @@ -106,11 +106,11 @@ * Bit fields in each pointer register: * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned */ -#define FH_MEM_CBBC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) -#define FH_MEM_CBBC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) +#define FH49_MEM_CBBC_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0x9D0) +#define FH49_MEM_CBBC_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xA10) /* Find TFD CB base pointer for given queue (range 0-15). */ -#define FH_MEM_CBBC_QUEUE(x) (FH_MEM_CBBC_LOWER_BOUND + (x) * 0x4) +#define FH49_MEM_CBBC_QUEUE(x) (FH49_MEM_CBBC_LOWER_BOUND + (x) * 0x4) /** @@ -132,18 +132,18 @@ * Each entry (1 dword) points to a receive buffer (RB) of consistent size * (typically 4K, although 8K or 16K are also selectable by driver). * Driver sets up RB size and number of RBDs in the CB via Rx config - * register FH_MEM_RCSR_CHNL0_CONFIG_REG. + * register FH49_MEM_RCSR_CHNL0_CONFIG_REG. * * Bit fields within one RBD: * 27-0: Receive Buffer physical address bits [35:8], 256-byte aligned * * Driver sets physical address [35:8] of base of RBD circular buffer - * into FH_RSCSR_CHNL0_RBDCB_BASE_REG [27:0]. + * into FH49_RSCSR_CHNL0_RBDCB_BASE_REG [27:0]. * * 2) Rx status buffer, 8 bytes, in which 4965 indicates which Rx Buffers * (RBs) have been filled, via a "write pointer", actually the idx of * the RB's corresponding RBD within the circular buffer. Driver sets - * physical address [35:4] into FH_RSCSR_CHNL0_STTS_WPTR_REG [31:0]. + * physical address [35:4] into FH49_RSCSR_CHNL0_STTS_WPTR_REG [31:0]. * * Bit fields in lower dword of Rx status buffer (upper dword not used * by driver; see struct il4965_shared, val0): @@ -154,7 +154,7 @@ * As the driver prepares Receive Buffers (RBs) for 4965 to fill, driver must * enter pointers to these RBs into contiguous RBD circular buffer entries, * and update the 4965's "write" idx register, - * FH_RSCSR_CHNL0_RBDCB_WPTR_REG. + * FH49_RSCSR_CHNL0_RBDCB_WPTR_REG. * * This "write" idx corresponds to the *next* RBD that the driver will make * available, i.e. one RBD past the tail of the ready-to-fill RBDs within @@ -182,23 +182,23 @@ * and "read" idxes; that is, make sure that there are no more than 254 * buffers waiting to be filled. */ -#define FH_MEM_RSCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBC0) -#define FH_MEM_RSCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) -#define FH_MEM_RSCSR_CHNL0 (FH_MEM_RSCSR_LOWER_BOUND) +#define FH49_MEM_RSCSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xBC0) +#define FH49_MEM_RSCSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xC00) +#define FH49_MEM_RSCSR_CHNL0 (FH49_MEM_RSCSR_LOWER_BOUND) /** * Physical base address of 8-byte Rx Status buffer. * Bit fields: * 31-0: Rx status buffer physical base address [35:4], must 16-byte aligned. */ -#define FH_RSCSR_CHNL0_STTS_WPTR_REG (FH_MEM_RSCSR_CHNL0) +#define FH49_RSCSR_CHNL0_STTS_WPTR_REG (FH49_MEM_RSCSR_CHNL0) /** * Physical base address of Rx Buffer Descriptor Circular Buffer. * Bit fields: * 27-0: RBD CD physical base address [35:8], must be 256-byte aligned. */ -#define FH_RSCSR_CHNL0_RBDCB_BASE_REG (FH_MEM_RSCSR_CHNL0 + 0x004) +#define FH49_RSCSR_CHNL0_RBDCB_BASE_REG (FH49_MEM_RSCSR_CHNL0 + 0x004) /** * Rx write pointer (idx, really!). @@ -206,20 +206,20 @@ * 11-0: Index of driver's most recent prepared-to-be-filled RBD, + 1. * NOTE: For 256-entry circular buffer, use only bits [7:0]. */ -#define FH_RSCSR_CHNL0_RBDCB_WPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x008) -#define FH_RSCSR_CHNL0_WPTR (FH_RSCSR_CHNL0_RBDCB_WPTR_REG) +#define FH49_RSCSR_CHNL0_RBDCB_WPTR_REG (FH49_MEM_RSCSR_CHNL0 + 0x008) +#define FH49_RSCSR_CHNL0_WPTR (FH49_RSCSR_CHNL0_RBDCB_WPTR_REG) /** * Rx Config/Status Registers (RCSR) * Rx Config Reg for channel 0 (only channel used) * - * Driver must initialize FH_MEM_RCSR_CHNL0_CONFIG_REG as follows for + * Driver must initialize FH49_MEM_RCSR_CHNL0_CONFIG_REG as follows for * normal operation (see bit fields). * - * Clearing FH_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA. - * Driver should poll FH_MEM_RSSR_RX_STATUS_REG for - * FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing. + * Clearing FH49_MEM_RCSR_CHNL0_CONFIG_REG to 0 turns off Rx DMA. + * Driver should poll FH49_MEM_RSSR_RX_STATUS_REG for + * FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (bit 24) before continuing. * * Bit fields: * 31-30: Rx DMA channel enable: '00' off/pause, '01' pause at end of frame, @@ -236,67 +236,67 @@ * typical value 0x10 (about 1/2 msec) * 3- 0: reserved */ -#define FH_MEM_RCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) -#define FH_MEM_RCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xCC0) -#define FH_MEM_RCSR_CHNL0 (FH_MEM_RCSR_LOWER_BOUND) +#define FH49_MEM_RCSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xC00) +#define FH49_MEM_RCSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xCC0) +#define FH49_MEM_RCSR_CHNL0 (FH49_MEM_RCSR_LOWER_BOUND) -#define FH_MEM_RCSR_CHNL0_CONFIG_REG (FH_MEM_RCSR_CHNL0) +#define FH49_MEM_RCSR_CHNL0_CONFIG_REG (FH49_MEM_RCSR_CHNL0) -#define FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */ -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */ -#define FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */ -#define FH_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */ -#define FH_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */ -#define FH_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/ +#define FH49_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */ +#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */ +#define FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000) /* bit 15 */ +#define FH49_RCSR_CHNL0_RX_CONFIG_RB_SIZE_MSK (0x00030000) /* bits 16-17 */ +#define FH49_RCSR_CHNL0_RX_CONFIG_RBDBC_SIZE_MSK (0x00F00000) /* bits 20-23 */ +#define FH49_RCSR_CHNL0_RX_CONFIG_DMA_CHNL_EN_MSK (0xC0000000) /* bits 30-31*/ -#define FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20) -#define FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4) +#define FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS (20) +#define FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS (4) #define RX_RB_TIMEOUT (0x10) -#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) -#define FH_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000) -#define FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000) +#define FH49_RCSR_RX_CONFIG_CHNL_EN_PAUSE_VAL (0x00000000) +#define FH49_RCSR_RX_CONFIG_CHNL_EN_PAUSE_EOF_VAL (0x40000000) +#define FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL (0x80000000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) -#define FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) +#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K (0x00000000) +#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K (0x00010000) +#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_12K (0x00020000) +#define FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_16K (0x00030000) -#define FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004) -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) -#define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) +#define FH49_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY (0x00000004) +#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_NO_INT_VAL (0x00000000) +#define FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL (0x00001000) /** * Rx Shared Status Registers (RSSR) * * After stopping Rx DMA channel (writing 0 to - * FH_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll - * FH_MEM_RSSR_RX_STATUS_REG until Rx channel is idle. + * FH49_MEM_RCSR_CHNL0_CONFIG_REG), driver must poll + * FH49_MEM_RSSR_RX_STATUS_REG until Rx channel is idle. * * Bit fields: * 24: 1 = Channel 0 is idle * - * FH_MEM_RSSR_SHARED_CTRL_REG and FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV + * FH49_MEM_RSSR_SHARED_CTRL_REG and FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV * contain default values that should not be altered by the driver. */ -#define FH_MEM_RSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xC40) -#define FH_MEM_RSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) +#define FH49_MEM_RSSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xC40) +#define FH49_MEM_RSSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xD00) -#define FH_MEM_RSSR_SHARED_CTRL_REG (FH_MEM_RSSR_LOWER_BOUND) -#define FH_MEM_RSSR_RX_STATUS_REG (FH_MEM_RSSR_LOWER_BOUND + 0x004) -#define FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\ - (FH_MEM_RSSR_LOWER_BOUND + 0x008) +#define FH49_MEM_RSSR_SHARED_CTRL_REG (FH49_MEM_RSSR_LOWER_BOUND) +#define FH49_MEM_RSSR_RX_STATUS_REG (FH49_MEM_RSSR_LOWER_BOUND + 0x004) +#define FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV\ + (FH49_MEM_RSSR_LOWER_BOUND + 0x008) -#define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) +#define FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE (0x01000000) -#define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 +#define FH49_MEM_TFDIB_REG1_ADDR_BITSHIFT 28 /* TFDB Area - TFDs buffer table */ -#define FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) -#define FH_TFDIB_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x900) -#define FH_TFDIB_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0x958) -#define FH_TFDIB_CTRL0_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl)) -#define FH_TFDIB_CTRL1_REG(_chnl) (FH_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4) +#define FH49_MEM_TFDIB_DRAM_ADDR_LSB_MSK (0xFFFFFFFF) +#define FH49_TFDIB_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0x900) +#define FH49_TFDIB_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0x958) +#define FH49_TFDIB_CTRL0_REG(_chnl) (FH49_TFDIB_LOWER_BOUND + 0x8 * (_chnl)) +#define FH49_TFDIB_CTRL1_REG(_chnl) (FH49_TFDIB_LOWER_BOUND + 0x8 * (_chnl) + 0x4) /** * Transmit DMA Channel Control/Status Registers (TCSR) @@ -306,10 +306,10 @@ * which feed the DMA/FIFO channels); config regs are separated by 0x20 bytes. * * To use a Tx DMA channel, driver must initialize its - * FH_TCSR_CHNL_TX_CONFIG_REG(chnl) with: + * FH49_TCSR_CHNL_TX_CONFIG_REG(chnl) with: * - * FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | - * FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL + * FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE | + * FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL * * All other bits should be 0. * @@ -320,62 +320,62 @@ * 3: Enable internal DMA requests (1, normal operation), disable (0) * 2- 0: Reserved, set to "0" */ -#define FH_TCSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xD00) -#define FH_TCSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xE60) +#define FH49_TCSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xD00) +#define FH49_TCSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xE60) /* Find Control/Status reg for given Tx DMA/FIFO channel */ #define FH49_TCSR_CHNL_NUM (7) #define FH50_TCSR_CHNL_NUM (8) /* TCSR: tx_config register values */ -#define FH_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ - (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl)) -#define FH_TCSR_CHNL_TX_CREDIT_REG(_chnl) \ - (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4) -#define FH_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \ - (FH_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8) +#define FH49_TCSR_CHNL_TX_CONFIG_REG(_chnl) \ + (FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl)) +#define FH49_TCSR_CHNL_TX_CREDIT_REG(_chnl) \ + (FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x4) +#define FH49_TCSR_CHNL_TX_BUF_STS_REG(_chnl) \ + (FH49_TCSR_LOWER_BOUND + 0x20 * (_chnl) + 0x8) -#define FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000) -#define FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV (0x00000001) +#define FH49_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF (0x00000000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_DRV (0x00000001) -#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE (0x00000000) -#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE (0x00000008) +#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_DISABLE (0x00000000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE (0x00000008) -#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000) -#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000) -#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_NOINT (0x00000000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_ENDTFD (0x00100000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD (0x00200000) -#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000) -#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD (0x00400000) -#define FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD (0x00800000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT (0x00000000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_ENDTFD (0x00400000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_IFTFD (0x00800000) -#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) -#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000) -#define FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE (0x00000000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_PAUSE_EOF (0x40000000) +#define FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE (0x80000000) -#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000) -#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000) -#define FH_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003) +#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_EMPTY (0x00000000) +#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_WAIT (0x00002000) +#define FH49_TCSR_CHNL_TX_BUF_STS_REG_VAL_TFDB_VALID (0x00000003) -#define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20) -#define FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12) +#define FH49_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM (20) +#define FH49_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_IDX (12) /** * Tx Shared Status Registers (TSSR) * * After stopping Tx DMA channel (writing 0 to - * FH_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll - * FH_TSSR_TX_STATUS_REG until selected Tx channel is idle + * FH49_TCSR_CHNL_TX_CONFIG_REG(chnl)), driver must poll + * FH49_TSSR_TX_STATUS_REG until selected Tx channel is idle * (channel's buffers empty | no pending requests). * * Bit fields: * 31-24: 1 = Channel buffers empty (channel 7:0) * 23-16: 1 = No pending requests (channel 7:0) */ -#define FH_TSSR_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xEA0) -#define FH_TSSR_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xEC0) +#define FH49_TSSR_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0xEA0) +#define FH49_TSSR_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0xEC0) -#define FH_TSSR_TX_STATUS_REG (FH_TSSR_LOWER_BOUND + 0x010) +#define FH49_TSSR_TX_STATUS_REG (FH49_TSSR_LOWER_BOUND + 0x010) /** * Bit fields for TSSR(Tx Shared Status & Control) error status register: @@ -394,22 +394,22 @@ * synchronized to the TxFIFO status * uCode/driver must write "1" in order to clear this flag */ -#define FH_TSSR_TX_ERROR_REG (FH_TSSR_LOWER_BOUND + 0x018) +#define FH49_TSSR_TX_ERROR_REG (FH49_TSSR_LOWER_BOUND + 0x018) -#define FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16) +#define FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(_chnl) ((1 << (_chnl)) << 16) /* Tx service channels */ -#define FH_SRVC_CHNL (9) -#define FH_SRVC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9C8) -#define FH_SRVC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) -#define FH_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \ - (FH_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4) +#define FH49_SRVC_CHNL (9) +#define FH49_SRVC_LOWER_BOUND (FH49_MEM_LOWER_BOUND + 0x9C8) +#define FH49_SRVC_UPPER_BOUND (FH49_MEM_LOWER_BOUND + 0x9D0) +#define FH49_SRVC_CHNL_SRAM_ADDR_REG(_chnl) \ + (FH49_SRVC_LOWER_BOUND + ((_chnl) - 9) * 0x4) -#define FH_TX_CHICKEN_BITS_REG (FH_MEM_LOWER_BOUND + 0xE98) +#define FH49_TX_CHICKEN_BITS_REG (FH49_MEM_LOWER_BOUND + 0xE98) /* Instruct FH to increment the retry count of a packet when * it is brought from the memory to TX-FIFO */ -#define FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN (0x00000002) +#define FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN (0x00000002) /* Keep Warm Size */ #define IL_KW_SIZE 0x1000 /* 4k */ -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html