Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
---
drivers/net/wireless/iwlegacy/common.h | 461 ++++++++++++++++++++++++-
drivers/net/wireless/iwlegacy/iwl-legacy-rs.h | 454 ------------------------
2 files changed, 442 insertions(+), 473 deletions(-)
delete mode 100644 drivers/net/wireless/iwlegacy/iwl-legacy-rs.h
diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h
index e83c6ab..2e66929 100644
--- a/drivers/net/wireless/iwlegacy/common.h
+++ b/drivers/net/wireless/iwlegacy/common.h
@@ -39,7 +39,6 @@
#include "iwl-debug.h"
#include "iwl-led.h"
#include "iwl-power.h"
-#include "iwl-legacy-rs.h"
struct il_host_cmd;
struct il_cmd;
@@ -480,24 +479,6 @@ struct il_station_priv_common {
u8 sta_id;
};
-/*
- * il_station_priv: Driver's ilate station information
- *
- * When mac80211 creates a station it reserves some space (hw->sta_data_size)
- * in the structure for use by driver. This structure is places in that
- * space.
- *
- * The common struct MUST be first because it is shared between
- * 3945 and 4965!
- */
-struct il_station_priv {
- struct il_station_priv_common common;
- struct il_lq_sta lq_sta;
- atomic_t pending_frames;
- bool client;
- bool asleep;
-};
-
/**
* struct il_vif_priv - driver's ilate per-interface information
*
@@ -2573,4 +2554,446 @@ struct il_tfd {
#define PCI_CFG_LINK_CTRL_VAL_L0S_EN 0x01
#define PCI_CFG_LINK_CTRL_VAL_L1_EN 0x02
+struct il_rate_info {
+ u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */
+ u8 plcp_siso; /* uCode API: RATE_SISO_6M_PLCP, etc. */
+ u8 plcp_mimo2; /* uCode API: RATE_MIMO2_6M_PLCP, etc. */
+ u8 ieee; /* MAC header: RATE_6M_IEEE, etc. */
+ u8 prev_ieee; /* previous rate in IEEE speeds */
+ u8 next_ieee; /* next rate in IEEE speeds */
+ u8 prev_rs; /* previous rate used in rs algo */
+ u8 next_rs; /* next rate used in rs algo */
+ u8 prev_rs_tgg; /* previous rate used in TGG rs algo */
+ u8 next_rs_tgg; /* next rate used in TGG rs algo */
+};
+
+struct il3945_rate_info {
+ u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */
+ u8 ieee; /* MAC header: RATE_6M_IEEE, etc. */
+ u8 prev_ieee; /* previous rate in IEEE speeds */
+ u8 next_ieee; /* next rate in IEEE speeds */
+ u8 prev_rs; /* previous rate used in rs algo */
+ u8 next_rs; /* next rate used in rs algo */
+ u8 prev_rs_tgg; /* previous rate used in TGG rs algo */
+ u8 next_rs_tgg; /* next rate used in TGG rs algo */
+ u8 table_rs_idx; /* idx in rate scale table cmd */
+ u8 prev_table_rs; /* prev in rate table cmd */
+};
+
+
+/*
+ * These serve as idxes into
+ * struct il_rate_info il_rates[RATE_COUNT];
+ */
+enum {
+ RATE_1M_IDX = 0,
+ RATE_2M_IDX,
+ RATE_5M_IDX,
+ RATE_11M_IDX,
+ RATE_6M_IDX,
+ RATE_9M_IDX,
+ RATE_12M_IDX,
+ RATE_18M_IDX,
+ RATE_24M_IDX,
+ RATE_36M_IDX,
+ RATE_48M_IDX,
+ RATE_54M_IDX,
+ RATE_60M_IDX,
+ RATE_COUNT,
+ RATE_COUNT_LEGACY = RATE_COUNT - 1, /* Excluding 60M */
+ RATE_COUNT_3945 = RATE_COUNT - 1,
+ RATE_INVM_IDX = RATE_COUNT,
+ RATE_INVALID = RATE_COUNT,
+};
+
+enum {
+ RATE_6M_IDX_TBL = 0,
+ RATE_9M_IDX_TBL,
+ RATE_12M_IDX_TBL,
+ RATE_18M_IDX_TBL,
+ RATE_24M_IDX_TBL,
+ RATE_36M_IDX_TBL,
+ RATE_48M_IDX_TBL,
+ RATE_54M_IDX_TBL,
+ RATE_1M_IDX_TBL,
+ RATE_2M_IDX_TBL,
+ RATE_5M_IDX_TBL,
+ RATE_11M_IDX_TBL,
+ RATE_INVM_IDX_TBL = RATE_INVM_IDX - 1,
+};
+
+enum {
+ IL_FIRST_OFDM_RATE = RATE_6M_IDX,
+ IL39_LAST_OFDM_RATE = RATE_54M_IDX,
+ IL_LAST_OFDM_RATE = RATE_60M_IDX,
+ IL_FIRST_CCK_RATE = RATE_1M_IDX,
+ IL_LAST_CCK_RATE = RATE_11M_IDX,
+};
+
+/* #define vs. enum to keep from defaulting to 'large integer' */
+#define RATE_6M_MASK (1 << RATE_6M_IDX)
+#define RATE_9M_MASK (1 << RATE_9M_IDX)
+#define RATE_12M_MASK (1 << RATE_12M_IDX)
+#define RATE_18M_MASK (1 << RATE_18M_IDX)
+#define RATE_24M_MASK (1 << RATE_24M_IDX)
+#define RATE_36M_MASK (1 << RATE_36M_IDX)
+#define RATE_48M_MASK (1 << RATE_48M_IDX)
+#define RATE_54M_MASK (1 << RATE_54M_IDX)
+#define RATE_60M_MASK (1 << RATE_60M_IDX)
+#define RATE_1M_MASK (1 << RATE_1M_IDX)
+#define RATE_2M_MASK (1 << RATE_2M_IDX)
+#define RATE_5M_MASK (1 << RATE_5M_IDX)
+#define RATE_11M_MASK (1 << RATE_11M_IDX)
+
+/* uCode API values for legacy bit rates, both OFDM and CCK */
+enum {
+ RATE_6M_PLCP = 13,
+ RATE_9M_PLCP = 15,
+ RATE_12M_PLCP = 5,
+ RATE_18M_PLCP = 7,
+ RATE_24M_PLCP = 9,
+ RATE_36M_PLCP = 11,
+ RATE_48M_PLCP = 1,
+ RATE_54M_PLCP = 3,
+ RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/
+ RATE_1M_PLCP = 10,
+ RATE_2M_PLCP = 20,
+ RATE_5M_PLCP = 55,
+ RATE_11M_PLCP = 110,
+ /*FIXME:RS:add RATE_LEGACY_INVM_PLCP = 0,*/
+};
+
+/* uCode API values for OFDM high-throughput (HT) bit rates */
+enum {
+ RATE_SISO_6M_PLCP = 0,
+ RATE_SISO_12M_PLCP = 1,
+ RATE_SISO_18M_PLCP = 2,
+ RATE_SISO_24M_PLCP = 3,
+ RATE_SISO_36M_PLCP = 4,
+ RATE_SISO_48M_PLCP = 5,
+ RATE_SISO_54M_PLCP = 6,
+ RATE_SISO_60M_PLCP = 7,
+ RATE_MIMO2_6M_PLCP = 0x8,
+ RATE_MIMO2_12M_PLCP = 0x9,
+ RATE_MIMO2_18M_PLCP = 0xa,
+ RATE_MIMO2_24M_PLCP = 0xb,
+ RATE_MIMO2_36M_PLCP = 0xc,
+ RATE_MIMO2_48M_PLCP = 0xd,
+ RATE_MIMO2_54M_PLCP = 0xe,
+ RATE_MIMO2_60M_PLCP = 0xf,
+ RATE_SISO_INVM_PLCP,
+ RATE_MIMO2_INVM_PLCP = RATE_SISO_INVM_PLCP,
+};
+
+/* MAC header values for bit rates */
+enum {
+ RATE_6M_IEEE = 12,
+ RATE_9M_IEEE = 18,
+ RATE_12M_IEEE = 24,
+ RATE_18M_IEEE = 36,
+ RATE_24M_IEEE = 48,
+ RATE_36M_IEEE = 72,
+ RATE_48M_IEEE = 96,
+ RATE_54M_IEEE = 108,
+ RATE_60M_IEEE = 120,
+ RATE_1M_IEEE = 2,
+ RATE_2M_IEEE = 4,
+ RATE_5M_IEEE = 11,
+ RATE_11M_IEEE = 22,
+};
+
+#define IL_CCK_BASIC_RATES_MASK \
+ (RATE_1M_MASK | \
+ RATE_2M_MASK)
+
+#define IL_CCK_RATES_MASK \
+ (IL_CCK_BASIC_RATES_MASK | \
+ RATE_5M_MASK | \
+ RATE_11M_MASK)
+
+#define IL_OFDM_BASIC_RATES_MASK \
+ (RATE_6M_MASK | \
+ RATE_12M_MASK | \
+ RATE_24M_MASK)
+
+#define IL_OFDM_RATES_MASK \
+ (IL_OFDM_BASIC_RATES_MASK | \
+ RATE_9M_MASK | \
+ RATE_18M_MASK | \
+ RATE_36M_MASK | \
+ RATE_48M_MASK | \
+ RATE_54M_MASK)
+
+#define IL_BASIC_RATES_MASK \
+ (IL_OFDM_BASIC_RATES_MASK | \
+ IL_CCK_BASIC_RATES_MASK)
+
+#define RATES_MASK ((1 << RATE_COUNT) - 1)
+#define RATES_MASK_3945 ((1 << RATE_COUNT_3945) - 1)
+
+#define IL_INVALID_VALUE -1
+
+#define IL_MIN_RSSI_VAL -100
+#define IL_MAX_RSSI_VAL 0
+
+/* These values specify how many Tx frame attempts before
+ * searching for a new modulation mode */
+#define IL_LEGACY_FAILURE_LIMIT 160
+#define IL_LEGACY_SUCCESS_LIMIT 480
+#define IL_LEGACY_TBL_COUNT 160
+
+#define IL_NONE_LEGACY_FAILURE_LIMIT 400
+#define IL_NONE_LEGACY_SUCCESS_LIMIT 4500
+#define IL_NONE_LEGACY_TBL_COUNT 1500
+
+/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */
+#define IL_RS_GOOD_RATIO 12800 /* 100% */
+#define RATE_SCALE_SWITCH 10880 /* 85% */
+#define RATE_HIGH_TH 10880 /* 85% */
+#define RATE_INCREASE_TH 6400 /* 50% */
+#define RATE_DECREASE_TH 1920 /* 15% */
+
+/* possible actions when in legacy mode */
+#define IL_LEGACY_SWITCH_ANTENNA1 0
+#define IL_LEGACY_SWITCH_ANTENNA2 1
+#define IL_LEGACY_SWITCH_SISO 2
+#define IL_LEGACY_SWITCH_MIMO2_AB 3
+#define IL_LEGACY_SWITCH_MIMO2_AC 4
+#define IL_LEGACY_SWITCH_MIMO2_BC 5
+
+/* possible actions when in siso mode */
+#define IL_SISO_SWITCH_ANTENNA1 0
+#define IL_SISO_SWITCH_ANTENNA2 1
+#define IL_SISO_SWITCH_MIMO2_AB 2
+#define IL_SISO_SWITCH_MIMO2_AC 3
+#define IL_SISO_SWITCH_MIMO2_BC 4
+#define IL_SISO_SWITCH_GI 5
+
+/* possible actions when in mimo mode */
+#define IL_MIMO2_SWITCH_ANTENNA1 0
+#define IL_MIMO2_SWITCH_ANTENNA2 1
+#define IL_MIMO2_SWITCH_SISO_A 2
+#define IL_MIMO2_SWITCH_SISO_B 3
+#define IL_MIMO2_SWITCH_SISO_C 4
+#define IL_MIMO2_SWITCH_GI 5
+
+#define IL_MAX_SEARCH IL_MIMO2_SWITCH_GI
+
+#define IL_ACTION_LIMIT 3 /* # possible actions */
+
+#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */
+
+/* load per tid defines for A-MPDU activation */
+#define IL_AGG_TPT_THREHOLD 0
+#define IL_AGG_LOAD_THRESHOLD 10
+#define IL_AGG_ALL_TID 0xff
+#define TID_QUEUE_CELL_SPACING 50 /*mS */
+#define TID_QUEUE_MAX_SIZE 20
+#define TID_ROUND_VALUE 5 /* mS */
+#define TID_MAX_LOAD_COUNT 8
+
+#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING)
+#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y))
+
+extern const struct il_rate_info il_rates[RATE_COUNT];
+
+enum il_table_type {
+ LQ_NONE,
+ LQ_G, /* legacy types */
+ LQ_A,
+ LQ_SISO, /* high-throughput types */
+ LQ_MIMO2,
+ LQ_MAX,
+};
+
+#define is_legacy(tbl) ((tbl) == LQ_G || (tbl) == LQ_A)
+#define is_siso(tbl) ((tbl) == LQ_SISO)
+#define is_mimo2(tbl) ((tbl) == LQ_MIMO2)
+#define is_mimo(tbl) (is_mimo2(tbl))
+#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl))
+#define is_a_band(tbl) ((tbl) == LQ_A)
+#define is_g_and(tbl) ((tbl) == LQ_G)
+
+#define ANT_NONE 0x0
+#define ANT_A BIT(0)
+#define ANT_B BIT(1)
+#define ANT_AB (ANT_A | ANT_B)
+#define ANT_C BIT(2)
+#define ANT_AC (ANT_A | ANT_C)
+#define ANT_BC (ANT_B | ANT_C)
+#define ANT_ABC (ANT_AB | ANT_C)
+
+#define IL_MAX_MCS_DISPLAY_SIZE 12
+
+struct il_rate_mcs_info {
+ char mbps[IL_MAX_MCS_DISPLAY_SIZE];
+ char mcs[IL_MAX_MCS_DISPLAY_SIZE];
+};
+
+/**
+ * struct il_rate_scale_data -- tx success history for one rate
+ */
+struct il_rate_scale_data {
+ u64 data; /* bitmap of successful frames */
+ s32 success_counter; /* number of frames successful */
+ s32 success_ratio; /* per-cent * 128 */
+ s32 counter; /* number of frames attempted */
+ s32 average_tpt; /* success ratio * expected throughput */
+ unsigned long stamp;
+};
+
+/**
+ * struct il_scale_tbl_info -- tx params and success history for all rates
+ *
+ * There are two of these in struct il_lq_sta,
+ * one for "active", and one for "search".
+ */
+struct il_scale_tbl_info {
+ enum il_table_type lq_type;
+ u8 ant_type;
+ u8 is_SGI; /* 1 = short guard interval */
+ u8 is_ht40; /* 1 = 40 MHz channel width */
+ u8 is_dup; /* 1 = duplicated data streams */
+ u8 action; /* change modulation; IL_[LEGACY/SISO/MIMO]_SWITCH_* */
+ u8 max_search; /* maximun number of tables we can search */
+ s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */
+ u32 current_rate; /* rate_n_flags, uCode API format */
+ struct il_rate_scale_data win[RATE_COUNT]; /* rate histories */
+};
+
+struct il_traffic_load {
+ unsigned long time_stamp; /* age of the oldest stats */
+ u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time
+ * slice */
+ u32 total; /* total num of packets during the
+ * last TID_MAX_TIME_DIFF */
+ u8 queue_count; /* number of queues that has
+ * been used since the last cleanup */
+ u8 head; /* start of the circular buffer */
+};
+
+/**
+ * struct il_lq_sta -- driver's rate scaling ilate structure
+ *
+ * Pointer to this gets passed back and forth between driver and mac80211.
+ */
+struct il_lq_sta {
+ u8 active_tbl; /* idx of active table, range 0-1 */
+ u8 enable_counter; /* indicates HT mode */
+ u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */
+ u8 search_better_tbl; /* 1: currently trying alternate mode */
+ s32 last_tpt;
+
+ /* The following determine when to search for a new mode */
+ u32 table_count_limit;
+ u32 max_failure_limit; /* # failed frames before new search */
+ u32 max_success_limit; /* # successful frames before new search */
+ u32 table_count;
+ u32 total_failed; /* total failed frames, any/all rates */
+ u32 total_success; /* total successful frames, any/all rates */
+ u64 flush_timer; /* time staying in mode before new search */
+
+ u8 action_counter; /* # mode-switch actions tried */
+ u8 is_green;
+ u8 is_dup;
+ enum ieee80211_band band;
+
+ /* The following are bitmaps of rates; RATE_6M_MASK, etc. */
+ u32 supp_rates;
+ u16 active_legacy_rate;
+ u16 active_siso_rate;
+ u16 active_mimo2_rate;
+ s8 max_rate_idx; /* Max rate set by user */
+ u8 missed_rate_counter;
+
+ struct il_link_quality_cmd lq;
+ struct il_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
+ struct il_traffic_load load[TID_MAX_LOAD_COUNT];
+ u8 tx_agg_tid_en;
+#ifdef CONFIG_MAC80211_DEBUGFS
+ struct dentry *rs_sta_dbgfs_scale_table_file;
+ struct dentry *rs_sta_dbgfs_stats_table_file;
+ struct dentry *rs_sta_dbgfs_rate_scale_data_file;
+ struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
+ u32 dbg_fixed_rate;
+#endif
+ struct il_priv *drv;
+
+ /* used to be in sta_info */
+ int last_txrate_idx;
+ /* last tx rate_n_flags */
+ u32 last_rate_n_flags;
+ /* packets destined for this STA are aggregated */
+ u8 is_agg;
+};
+
+/*
+ * il_station_priv: Driver's ilate station information
+ *
+ * When mac80211 creates a station it reserves some space (hw->sta_data_size)
+ * in the structure for use by driver. This structure is places in that
+ * space.
+ *
+ * The common struct MUST be first because it is shared between
+ * 3945 and 4965!
+ */
+struct il_station_priv {
+ struct il_station_priv_common common;
+ struct il_lq_sta lq_sta;
+ atomic_t pending_frames;
+ bool client;
+ bool asleep;
+};
+
+static inline u8 il4965_num_of_ant(u8 m)
+{
+ return !!(m & ANT_A) + !!(m & ANT_B) + !!(m & ANT_C);
+}
+
+static inline u8 il4965_first_antenna(u8 mask)
+{
+ if (mask & ANT_A)
+ return ANT_A;
+ if (mask & ANT_B)
+ return ANT_B;
+ return ANT_C;
+}
+
+
+/**
+ * il3945_rate_scale_init - Initialize the rate scale table based on assoc info
+ *
+ * The specific throughput table used is based on the type of network
+ * the associated with, including A, B, G, and G w/ TGG protection
+ */
+extern void il3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id);
+
+/* Initialize station's rate scaling information after adding station */
+extern void il4965_rs_rate_init(struct il_priv *il,
+ struct ieee80211_sta *sta, u8 sta_id);
+extern void il3945_rs_rate_init(struct il_priv *il,
+ struct ieee80211_sta *sta, u8 sta_id);
+
+/**
+ * il_rate_control_register - Register the rate control algorithm callbacks
+ *
+ * Since the rate control algorithm is hardware specific, there is no need
+ * or reason to place it as a stand alone module. The driver can call
+ * il_rate_control_register in order to register the rate control callbacks
+ * with the mac80211 subsystem. This should be performed prior to calling
+ * ieee80211_register_hw
+ *
+ */
+extern int il4965_rate_control_register(void);
+extern int il3945_rate_control_register(void);
+
+/**
+ * il_rate_control_unregister - Unregister the rate control callbacks
+ *
+ * This should be called after calling ieee80211_unregister_hw, but before
+ * the driver is unloaded.
+ */
+extern void il4965_rate_control_unregister(void);
+extern void il3945_rate_control_unregister(void);
+
#endif /* __il_core_h__ */
diff --git a/drivers/net/wireless/iwlegacy/iwl-legacy-rs.h b/drivers/net/wireless/iwlegacy/iwl-legacy-rs.h
deleted file mode 100644
index 58e04cb..0000000
--- a/drivers/net/wireless/iwlegacy/iwl-legacy-rs.h
+++ /dev/null
@@ -1,454 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@xxxxxxxxxxxxxxx>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#ifndef __il_rs_h__
-#define __il_rs_h__
-
-struct il_rate_info {
- u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */
- u8 plcp_siso; /* uCode API: RATE_SISO_6M_PLCP, etc. */
- u8 plcp_mimo2; /* uCode API: RATE_MIMO2_6M_PLCP, etc. */
- u8 ieee; /* MAC header: RATE_6M_IEEE, etc. */
- u8 prev_ieee; /* previous rate in IEEE speeds */
- u8 next_ieee; /* next rate in IEEE speeds */
- u8 prev_rs; /* previous rate used in rs algo */
- u8 next_rs; /* next rate used in rs algo */
- u8 prev_rs_tgg; /* previous rate used in TGG rs algo */
- u8 next_rs_tgg; /* next rate used in TGG rs algo */
-};
-
-struct il3945_rate_info {
- u8 plcp; /* uCode API: RATE_6M_PLCP, etc. */
- u8 ieee; /* MAC header: RATE_6M_IEEE, etc. */
- u8 prev_ieee; /* previous rate in IEEE speeds */
- u8 next_ieee; /* next rate in IEEE speeds */
- u8 prev_rs; /* previous rate used in rs algo */
- u8 next_rs; /* next rate used in rs algo */
- u8 prev_rs_tgg; /* previous rate used in TGG rs algo */
- u8 next_rs_tgg; /* next rate used in TGG rs algo */
- u8 table_rs_idx; /* idx in rate scale table cmd */
- u8 prev_table_rs; /* prev in rate table cmd */
-};
-
-
-/*
- * These serve as idxes into
- * struct il_rate_info il_rates[RATE_COUNT];
- */
-enum {
- RATE_1M_IDX = 0,
- RATE_2M_IDX,
- RATE_5M_IDX,
- RATE_11M_IDX,
- RATE_6M_IDX,
- RATE_9M_IDX,
- RATE_12M_IDX,
- RATE_18M_IDX,
- RATE_24M_IDX,
- RATE_36M_IDX,
- RATE_48M_IDX,
- RATE_54M_IDX,
- RATE_60M_IDX,
- RATE_COUNT,
- RATE_COUNT_LEGACY = RATE_COUNT - 1, /* Excluding 60M */
- RATE_COUNT_3945 = RATE_COUNT - 1,
- RATE_INVM_IDX = RATE_COUNT,
- RATE_INVALID = RATE_COUNT,
-};
-
-enum {
- RATE_6M_IDX_TBL = 0,
- RATE_9M_IDX_TBL,
- RATE_12M_IDX_TBL,
- RATE_18M_IDX_TBL,
- RATE_24M_IDX_TBL,
- RATE_36M_IDX_TBL,
- RATE_48M_IDX_TBL,
- RATE_54M_IDX_TBL,
- RATE_1M_IDX_TBL,
- RATE_2M_IDX_TBL,
- RATE_5M_IDX_TBL,
- RATE_11M_IDX_TBL,
- RATE_INVM_IDX_TBL = RATE_INVM_IDX - 1,
-};
-
-enum {
- IL_FIRST_OFDM_RATE = RATE_6M_IDX,
- IL39_LAST_OFDM_RATE = RATE_54M_IDX,
- IL_LAST_OFDM_RATE = RATE_60M_IDX,
- IL_FIRST_CCK_RATE = RATE_1M_IDX,
- IL_LAST_CCK_RATE = RATE_11M_IDX,
-};
-
-/* #define vs. enum to keep from defaulting to 'large integer' */
-#define RATE_6M_MASK (1 << RATE_6M_IDX)
-#define RATE_9M_MASK (1 << RATE_9M_IDX)
-#define RATE_12M_MASK (1 << RATE_12M_IDX)
-#define RATE_18M_MASK (1 << RATE_18M_IDX)
-#define RATE_24M_MASK (1 << RATE_24M_IDX)
-#define RATE_36M_MASK (1 << RATE_36M_IDX)
-#define RATE_48M_MASK (1 << RATE_48M_IDX)
-#define RATE_54M_MASK (1 << RATE_54M_IDX)
-#define RATE_60M_MASK (1 << RATE_60M_IDX)
-#define RATE_1M_MASK (1 << RATE_1M_IDX)
-#define RATE_2M_MASK (1 << RATE_2M_IDX)
-#define RATE_5M_MASK (1 << RATE_5M_IDX)
-#define RATE_11M_MASK (1 << RATE_11M_IDX)
-
-/* uCode API values for legacy bit rates, both OFDM and CCK */
-enum {
- RATE_6M_PLCP = 13,
- RATE_9M_PLCP = 15,
- RATE_12M_PLCP = 5,
- RATE_18M_PLCP = 7,
- RATE_24M_PLCP = 9,
- RATE_36M_PLCP = 11,
- RATE_48M_PLCP = 1,
- RATE_54M_PLCP = 3,
- RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/
- RATE_1M_PLCP = 10,
- RATE_2M_PLCP = 20,
- RATE_5M_PLCP = 55,
- RATE_11M_PLCP = 110,
- /*FIXME:RS:add RATE_LEGACY_INVM_PLCP = 0,*/
-};
-
-/* uCode API values for OFDM high-throughput (HT) bit rates */
-enum {
- RATE_SISO_6M_PLCP = 0,
- RATE_SISO_12M_PLCP = 1,
- RATE_SISO_18M_PLCP = 2,
- RATE_SISO_24M_PLCP = 3,
- RATE_SISO_36M_PLCP = 4,
- RATE_SISO_48M_PLCP = 5,
- RATE_SISO_54M_PLCP = 6,
- RATE_SISO_60M_PLCP = 7,
- RATE_MIMO2_6M_PLCP = 0x8,
- RATE_MIMO2_12M_PLCP = 0x9,
- RATE_MIMO2_18M_PLCP = 0xa,
- RATE_MIMO2_24M_PLCP = 0xb,
- RATE_MIMO2_36M_PLCP = 0xc,
- RATE_MIMO2_48M_PLCP = 0xd,
- RATE_MIMO2_54M_PLCP = 0xe,
- RATE_MIMO2_60M_PLCP = 0xf,
- RATE_SISO_INVM_PLCP,
- RATE_MIMO2_INVM_PLCP = RATE_SISO_INVM_PLCP,
-};
-
-/* MAC header values for bit rates */
-enum {
- RATE_6M_IEEE = 12,
- RATE_9M_IEEE = 18,
- RATE_12M_IEEE = 24,
- RATE_18M_IEEE = 36,
- RATE_24M_IEEE = 48,
- RATE_36M_IEEE = 72,
- RATE_48M_IEEE = 96,
- RATE_54M_IEEE = 108,
- RATE_60M_IEEE = 120,
- RATE_1M_IEEE = 2,
- RATE_2M_IEEE = 4,
- RATE_5M_IEEE = 11,
- RATE_11M_IEEE = 22,
-};
-
-#define IL_CCK_BASIC_RATES_MASK \
- (RATE_1M_MASK | \
- RATE_2M_MASK)
-
-#define IL_CCK_RATES_MASK \
- (IL_CCK_BASIC_RATES_MASK | \
- RATE_5M_MASK | \
- RATE_11M_MASK)
-
-#define IL_OFDM_BASIC_RATES_MASK \
- (RATE_6M_MASK | \
- RATE_12M_MASK | \
- RATE_24M_MASK)
-
-#define IL_OFDM_RATES_MASK \
- (IL_OFDM_BASIC_RATES_MASK | \
- RATE_9M_MASK | \
- RATE_18M_MASK | \
- RATE_36M_MASK | \
- RATE_48M_MASK | \
- RATE_54M_MASK)
-
-#define IL_BASIC_RATES_MASK \
- (IL_OFDM_BASIC_RATES_MASK | \
- IL_CCK_BASIC_RATES_MASK)
-
-#define RATES_MASK ((1 << RATE_COUNT) - 1)
-#define RATES_MASK_3945 ((1 << RATE_COUNT_3945) - 1)
-
-#define IL_INVALID_VALUE -1
-
-#define IL_MIN_RSSI_VAL -100
-#define IL_MAX_RSSI_VAL 0
-
-/* These values specify how many Tx frame attempts before
- * searching for a new modulation mode */
-#define IL_LEGACY_FAILURE_LIMIT 160
-#define IL_LEGACY_SUCCESS_LIMIT 480
-#define IL_LEGACY_TBL_COUNT 160
-
-#define IL_NONE_LEGACY_FAILURE_LIMIT 400
-#define IL_NONE_LEGACY_SUCCESS_LIMIT 4500
-#define IL_NONE_LEGACY_TBL_COUNT 1500
-
-/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */
-#define IL_RS_GOOD_RATIO 12800 /* 100% */
-#define RATE_SCALE_SWITCH 10880 /* 85% */
-#define RATE_HIGH_TH 10880 /* 85% */
-#define RATE_INCREASE_TH 6400 /* 50% */
-#define RATE_DECREASE_TH 1920 /* 15% */
-
-/* possible actions when in legacy mode */
-#define IL_LEGACY_SWITCH_ANTENNA1 0
-#define IL_LEGACY_SWITCH_ANTENNA2 1
-#define IL_LEGACY_SWITCH_SISO 2
-#define IL_LEGACY_SWITCH_MIMO2_AB 3
-#define IL_LEGACY_SWITCH_MIMO2_AC 4
-#define IL_LEGACY_SWITCH_MIMO2_BC 5
-
-/* possible actions when in siso mode */
-#define IL_SISO_SWITCH_ANTENNA1 0
-#define IL_SISO_SWITCH_ANTENNA2 1
-#define IL_SISO_SWITCH_MIMO2_AB 2
-#define IL_SISO_SWITCH_MIMO2_AC 3
-#define IL_SISO_SWITCH_MIMO2_BC 4
-#define IL_SISO_SWITCH_GI 5
-
-/* possible actions when in mimo mode */
-#define IL_MIMO2_SWITCH_ANTENNA1 0
-#define IL_MIMO2_SWITCH_ANTENNA2 1
-#define IL_MIMO2_SWITCH_SISO_A 2
-#define IL_MIMO2_SWITCH_SISO_B 3
-#define IL_MIMO2_SWITCH_SISO_C 4
-#define IL_MIMO2_SWITCH_GI 5
-
-#define IL_MAX_SEARCH IL_MIMO2_SWITCH_GI
-
-#define IL_ACTION_LIMIT 3 /* # possible actions */
-
-#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */
-
-/* load per tid defines for A-MPDU activation */
-#define IL_AGG_TPT_THREHOLD 0
-#define IL_AGG_LOAD_THRESHOLD 10
-#define IL_AGG_ALL_TID 0xff
-#define TID_QUEUE_CELL_SPACING 50 /*mS */
-#define TID_QUEUE_MAX_SIZE 20
-#define TID_ROUND_VALUE 5 /* mS */
-#define TID_MAX_LOAD_COUNT 8
-
-#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING)
-#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y))
-
-extern const struct il_rate_info il_rates[RATE_COUNT];
-
-enum il_table_type {
- LQ_NONE,
- LQ_G, /* legacy types */
- LQ_A,
- LQ_SISO, /* high-throughput types */
- LQ_MIMO2,
- LQ_MAX,
-};
-
-#define is_legacy(tbl) ((tbl) == LQ_G || (tbl) == LQ_A)
-#define is_siso(tbl) ((tbl) == LQ_SISO)
-#define is_mimo2(tbl) ((tbl) == LQ_MIMO2)
-#define is_mimo(tbl) (is_mimo2(tbl))
-#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl))
-#define is_a_band(tbl) ((tbl) == LQ_A)
-#define is_g_and(tbl) ((tbl) == LQ_G)
-
-#define ANT_NONE 0x0
-#define ANT_A BIT(0)
-#define ANT_B BIT(1)
-#define ANT_AB (ANT_A | ANT_B)
-#define ANT_C BIT(2)
-#define ANT_AC (ANT_A | ANT_C)
-#define ANT_BC (ANT_B | ANT_C)
-#define ANT_ABC (ANT_AB | ANT_C)
-
-#define IL_MAX_MCS_DISPLAY_SIZE 12
-
-struct il_rate_mcs_info {
- char mbps[IL_MAX_MCS_DISPLAY_SIZE];
- char mcs[IL_MAX_MCS_DISPLAY_SIZE];
-};
-
-/**
- * struct il_rate_scale_data -- tx success history for one rate
- */
-struct il_rate_scale_data {
- u64 data; /* bitmap of successful frames */
- s32 success_counter; /* number of frames successful */
- s32 success_ratio; /* per-cent * 128 */
- s32 counter; /* number of frames attempted */
- s32 average_tpt; /* success ratio * expected throughput */
- unsigned long stamp;
-};
-
-/**
- * struct il_scale_tbl_info -- tx params and success history for all rates
- *
- * There are two of these in struct il_lq_sta,
- * one for "active", and one for "search".
- */
-struct il_scale_tbl_info {
- enum il_table_type lq_type;
- u8 ant_type;
- u8 is_SGI; /* 1 = short guard interval */
- u8 is_ht40; /* 1 = 40 MHz channel width */
- u8 is_dup; /* 1 = duplicated data streams */
- u8 action; /* change modulation; IL_[LEGACY/SISO/MIMO]_SWITCH_* */
- u8 max_search; /* maximun number of tables we can search */
- s32 *expected_tpt; /* throughput metrics; expected_tpt_G, etc. */
- u32 current_rate; /* rate_n_flags, uCode API format */
- struct il_rate_scale_data win[RATE_COUNT]; /* rate histories */
-};
-
-struct il_traffic_load {
- unsigned long time_stamp; /* age of the oldest stats */
- u32 packet_count[TID_QUEUE_MAX_SIZE]; /* packet count in this time
- * slice */
- u32 total; /* total num of packets during the
- * last TID_MAX_TIME_DIFF */
- u8 queue_count; /* number of queues that has
- * been used since the last cleanup */
- u8 head; /* start of the circular buffer */
-};
-
-/**
- * struct il_lq_sta -- driver's rate scaling ilate structure
- *
- * Pointer to this gets passed back and forth between driver and mac80211.
- */
-struct il_lq_sta {
- u8 active_tbl; /* idx of active table, range 0-1 */
- u8 enable_counter; /* indicates HT mode */
- u8 stay_in_tbl; /* 1: disallow, 0: allow search for new mode */
- u8 search_better_tbl; /* 1: currently trying alternate mode */
- s32 last_tpt;
-
- /* The following determine when to search for a new mode */
- u32 table_count_limit;
- u32 max_failure_limit; /* # failed frames before new search */
- u32 max_success_limit; /* # successful frames before new search */
- u32 table_count;
- u32 total_failed; /* total failed frames, any/all rates */
- u32 total_success; /* total successful frames, any/all rates */
- u64 flush_timer; /* time staying in mode before new search */
-
- u8 action_counter; /* # mode-switch actions tried */
- u8 is_green;
- u8 is_dup;
- enum ieee80211_band band;
-
- /* The following are bitmaps of rates; RATE_6M_MASK, etc. */
- u32 supp_rates;
- u16 active_legacy_rate;
- u16 active_siso_rate;
- u16 active_mimo2_rate;
- s8 max_rate_idx; /* Max rate set by user */
- u8 missed_rate_counter;
-
- struct il_link_quality_cmd lq;
- struct il_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
- struct il_traffic_load load[TID_MAX_LOAD_COUNT];
- u8 tx_agg_tid_en;
-#ifdef CONFIG_MAC80211_DEBUGFS
- struct dentry *rs_sta_dbgfs_scale_table_file;
- struct dentry *rs_sta_dbgfs_stats_table_file;
- struct dentry *rs_sta_dbgfs_rate_scale_data_file;
- struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
- u32 dbg_fixed_rate;
-#endif
- struct il_priv *drv;
-
- /* used to be in sta_info */
- int last_txrate_idx;
- /* last tx rate_n_flags */
- u32 last_rate_n_flags;
- /* packets destined for this STA are aggregated */
- u8 is_agg;
-};
-
-static inline u8 il4965_num_of_ant(u8 m)
-{
- return !!(m & ANT_A) + !!(m & ANT_B) + !!(m & ANT_C);
-}
-
-static inline u8 il4965_first_antenna(u8 mask)
-{
- if (mask & ANT_A)
- return ANT_A;
- if (mask & ANT_B)
- return ANT_B;
- return ANT_C;
-}
-
-
-/**
- * il3945_rate_scale_init - Initialize the rate scale table based on assoc info
- *
- * The specific throughput table used is based on the type of network
- * the associated with, including A, B, G, and G w/ TGG protection
- */
-extern void il3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id);
-
-/* Initialize station's rate scaling information after adding station */
-extern void il4965_rs_rate_init(struct il_priv *il,
- struct ieee80211_sta *sta, u8 sta_id);
-extern void il3945_rs_rate_init(struct il_priv *il,
- struct ieee80211_sta *sta, u8 sta_id);
-
-/**
- * il_rate_control_register - Register the rate control algorithm callbacks
- *
- * Since the rate control algorithm is hardware specific, there is no need
- * or reason to place it as a stand alone module. The driver can call
- * il_rate_control_register in order to register the rate control callbacks
- * with the mac80211 subsystem. This should be performed prior to calling
- * ieee80211_register_hw
- *
- */
-extern int il4965_rate_control_register(void);
-extern int il3945_rate_control_register(void);
-
-/**
- * il_rate_control_unregister - Unregister the rate control callbacks
- *
- * This should be called after calling ieee80211_unregister_hw, but before
- * the driver is unloaded.
- */
-extern void il4965_rate_control_unregister(void);
-extern void il3945_rate_control_unregister(void);
-
-#endif /* __il_rs__ */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
