On the way remove also not needed iwl-fh.h include.
Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
---
drivers/net/wireless/iwlegacy/3945-mac.c | 3 +-
drivers/net/wireless/iwlegacy/3945-rs.c | 2 +-
drivers/net/wireless/iwlegacy/3945.c | 3 +-
drivers/net/wireless/iwlegacy/3945.h | 1 -
drivers/net/wireless/iwlegacy/commands.h | 3393 +++++++++++++++++++++++++
drivers/net/wireless/iwlegacy/iwl-commands.h | 3398 --------------------------
drivers/net/wireless/iwlegacy/iwl-dev.h | 3 +-
drivers/net/wireless/iwlegacy/iwl-power.h | 2 +-
8 files changed, 3398 insertions(+), 3407 deletions(-)
create mode 100644 drivers/net/wireless/iwlegacy/commands.h
delete mode 100644 drivers/net/wireless/iwlegacy/iwl-commands.h
diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c
index e33ebca..ae60410 100644
--- a/drivers/net/wireless/iwlegacy/3945-mac.c
+++ b/drivers/net/wireless/iwlegacy/3945-mac.c
@@ -51,8 +51,7 @@
#define DRV_NAME "iwl3945"
-#include "iwl-fh.h"
-#include "iwl-commands.h"
+#include "commands.h"
#include "iwl-sta.h"
#include "3945.h"
#include "iwl-core.h"
diff --git a/drivers/net/wireless/iwlegacy/3945-rs.c b/drivers/net/wireless/iwlegacy/3945-rs.c
index 0d2beba..4aa0432 100644
--- a/drivers/net/wireless/iwlegacy/3945-rs.c
+++ b/drivers/net/wireless/iwlegacy/3945-rs.c
@@ -36,7 +36,7 @@
#include <linux/workqueue.h>
-#include "iwl-commands.h"
+#include "commands.h"
#include "3945.h"
#include "iwl-sta.h"
diff --git a/drivers/net/wireless/iwlegacy/3945.c b/drivers/net/wireless/iwlegacy/3945.c
index 83fe531..ff8818b 100644
--- a/drivers/net/wireless/iwlegacy/3945.c
+++ b/drivers/net/wireless/iwlegacy/3945.c
@@ -39,8 +39,7 @@
#include <asm/unaligned.h>
#include <net/mac80211.h>
-#include "iwl-fh.h"
-#include "iwl-commands.h"
+#include "commands.h"
#include "iwl-sta.h"
#include "iwl-eeprom.h"
#include "iwl-core.h"
diff --git a/drivers/net/wireless/iwlegacy/3945.h b/drivers/net/wireless/iwlegacy/3945.h
index 9854cf1..7559a5e 100644
--- a/drivers/net/wireless/iwlegacy/3945.h
+++ b/drivers/net/wireless/iwlegacy/3945.h
@@ -36,7 +36,6 @@ extern const struct pci_device_id il3945_hw_card_ids[];
#include "iwl-csr.h"
#include "iwl-prph.h"
-#include "iwl-fh.h"
#include "iwl-debug.h"
#include "iwl-power.h"
#include "iwl-dev.h"
diff --git a/drivers/net/wireless/iwlegacy/commands.h b/drivers/net/wireless/iwlegacy/commands.h
new file mode 100644
index 0000000..82cf472
--- /dev/null
+++ b/drivers/net/wireless/iwlegacy/commands.h
@@ -0,0 +1,3393 @@
+/******************************************************************************
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@xxxxxxxxxxxxxxx>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+#ifndef __il_commands_h__
+#define __il_commands_h__
+
+struct il_priv;
+
+/* uCode version contains 4 values: Major/Minor/API/Serial */
+#define IL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
+#define IL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
+#define IL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
+#define IL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
+
+
+/* Tx rates */
+#define IL_CCK_RATES 4
+#define IL_OFDM_RATES 8
+#define IL_MAX_RATES (IL_CCK_RATES + IL_OFDM_RATES)
+
+enum {
+ N_ALIVE = 0x1,
+ N_ERROR = 0x2,
+
+ /* RXON and QOS commands */
+ C_RXON = 0x10,
+ C_RXON_ASSOC = 0x11,
+ C_QOS_PARAM = 0x13,
+ C_RXON_TIMING = 0x14,
+
+ /* Multi-Station support */
+ C_ADD_STA = 0x18,
+ C_REM_STA = 0x19,
+
+ /* Security */
+ C_WEPKEY = 0x20,
+
+ /* RX, TX, LEDs */
+ N_3945_RX = 0x1b, /* 3945 only */
+ C_TX = 0x1c,
+ C_RATE_SCALE = 0x47, /* 3945 only */
+ C_LEDS = 0x48,
+ C_TX_LINK_QUALITY_CMD = 0x4e, /* for 4965 */
+
+ /* 802.11h related */
+ C_CHANNEL_SWITCH = 0x72,
+ N_CHANNEL_SWITCH = 0x73,
+ C_SPECTRUM_MEASUREMENT = 0x74,
+ N_SPECTRUM_MEASUREMENT = 0x75,
+
+ /* Power Management */
+ C_POWER_TBL = 0x77,
+ N_PM_SLEEP = 0x7A,
+ N_PM_DEBUG_STATS = 0x7B,
+
+ /* Scan commands and notifications */
+ C_SCAN = 0x80,
+ C_SCAN_ABORT = 0x81,
+ N_SCAN_START = 0x82,
+ N_SCAN_RESULTS = 0x83,
+ N_SCAN_COMPLETE = 0x84,
+
+ /* IBSS/AP commands */
+ N_BEACON = 0x90,
+ C_TX_BEACON= 0x91,
+
+ /* Miscellaneous commands */
+ C_TX_PWR_TBL = 0x97,
+
+ /* Bluetooth device coexistence config command */
+ C_BT_CONFIG = 0x9b,
+
+ /* Statistics */
+ C_STATS = 0x9c,
+ N_STATS = 0x9d,
+
+ /* RF-KILL commands and notifications */
+ N_CARD_STATE = 0xa1,
+
+ /* Missed beacons notification */
+ N_MISSED_BEACONS = 0xa2,
+
+ C_CT_KILL_CONFIG = 0xa4,
+ C_SENSITIVITY = 0xa8,
+ C_PHY_CALIBRATION = 0xb0,
+ N_RX_PHY = 0xc0,
+ N_RX_MPDU = 0xc1,
+ N_RX = 0xc3,
+ N_COMPRESSED_BA = 0xc5,
+
+ IL_CN_MAX = 0xff
+};
+
+/******************************************************************************
+ * (0)
+ * Commonly used structures and definitions:
+ * Command header, rate_n_flags, txpower
+ *
+ *****************************************************************************/
+
+/* il_cmd_header flags value */
+#define IL_CMD_FAILED_MSK 0x40
+
+#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f)
+#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8)
+#define SEQ_TO_IDX(s) ((s) & 0xff)
+#define IDX_TO_SEQ(i) ((i) & 0xff)
+#define SEQ_HUGE_FRAME cpu_to_le16(0x4000)
+#define SEQ_RX_FRAME cpu_to_le16(0x8000)
+
+/**
+ * struct il_cmd_header
+ *
+ * This header format appears in the beginning of each command sent from the
+ * driver, and each response/notification received from uCode.
+ */
+struct il_cmd_header {
+ u8 cmd; /* Command ID: C_RXON, etc. */
+ u8 flags; /* 0:5 reserved, 6 abort, 7 internal */
+ /*
+ * The driver sets up the sequence number to values of its choosing.
+ * uCode does not use this value, but passes it back to the driver
+ * when sending the response to each driver-originated command, so
+ * the driver can match the response to the command. Since the values
+ * don't get used by uCode, the driver may set up an arbitrary format.
+ *
+ * There is one exception: uCode sets bit 15 when it originates
+ * the response/notification, i.e. when the response/notification
+ * is not a direct response to a command sent by the driver. For
+ * example, uCode issues N_3945_RX when it sends a received frame
+ * to the driver; it is not a direct response to any driver command.
+ *
+ * The Linux driver uses the following format:
+ *
+ * 0:7 tfd idx - position within TX queue
+ * 8:12 TX queue id
+ * 13 reserved
+ * 14 huge - driver sets this to indicate command is in the
+ * 'huge' storage at the end of the command buffers
+ * 15 unsolicited RX or uCode-originated notification
+ */
+ __le16 sequence;
+
+ /* command or response/notification data follows immediately */
+ u8 data[0];
+} __packed;
+
+
+/**
+ * struct il3945_tx_power
+ *
+ * Used in C_TX_PWR_TBL, C_SCAN, C_CHANNEL_SWITCH
+ *
+ * Each entry contains two values:
+ * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained
+ * linear value that multiplies the output of the digital signal processor,
+ * before being sent to the analog radio.
+ * 2) Radio gain. This sets the analog gain of the radio Tx path.
+ * It is a coarser setting, and behaves in a logarithmic (dB) fashion.
+ *
+ * Driver obtains values from struct il3945_tx_power power_gain_table[][].
+ */
+struct il3945_tx_power {
+ u8 tx_gain; /* gain for analog radio */
+ u8 dsp_atten; /* gain for DSP */
+} __packed;
+
+/**
+ * struct il3945_power_per_rate
+ *
+ * Used in C_TX_PWR_TBL, C_CHANNEL_SWITCH
+ */
+struct il3945_power_per_rate {
+ u8 rate; /* plcp */
+ struct il3945_tx_power tpc;
+ u8 reserved;
+} __packed;
+
+/**
+ * iwl4965 rate_n_flags bit fields
+ *
+ * rate_n_flags format is used in following iwl4965 commands:
+ * N_RX (response only)
+ * N_RX_MPDU (response only)
+ * C_TX (both command and response)
+ * C_TX_LINK_QUALITY_CMD
+ *
+ * High-throughput (HT) rate format for bits 7:0 (bit 8 must be "1"):
+ * 2-0: 0) 6 Mbps
+ * 1) 12 Mbps
+ * 2) 18 Mbps
+ * 3) 24 Mbps
+ * 4) 36 Mbps
+ * 5) 48 Mbps
+ * 6) 54 Mbps
+ * 7) 60 Mbps
+ *
+ * 4-3: 0) Single stream (SISO)
+ * 1) Dual stream (MIMO)
+ * 2) Triple stream (MIMO)
+ *
+ * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data
+ *
+ * Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"):
+ * 3-0: 0xD) 6 Mbps
+ * 0xF) 9 Mbps
+ * 0x5) 12 Mbps
+ * 0x7) 18 Mbps
+ * 0x9) 24 Mbps
+ * 0xB) 36 Mbps
+ * 0x1) 48 Mbps
+ * 0x3) 54 Mbps
+ *
+ * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"):
+ * 6-0: 10) 1 Mbps
+ * 20) 2 Mbps
+ * 55) 5.5 Mbps
+ * 110) 11 Mbps
+ */
+#define RATE_MCS_CODE_MSK 0x7
+#define RATE_MCS_SPATIAL_POS 3
+#define RATE_MCS_SPATIAL_MSK 0x18
+#define RATE_MCS_HT_DUP_POS 5
+#define RATE_MCS_HT_DUP_MSK 0x20
+
+/* Bit 8: (1) HT format, (0) legacy format in bits 7:0 */
+#define RATE_MCS_FLAGS_POS 8
+#define RATE_MCS_HT_POS 8
+#define RATE_MCS_HT_MSK 0x100
+
+/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */
+#define RATE_MCS_CCK_POS 9
+#define RATE_MCS_CCK_MSK 0x200
+
+/* Bit 10: (1) Use Green Field preamble */
+#define RATE_MCS_GF_POS 10
+#define RATE_MCS_GF_MSK 0x400
+
+/* Bit 11: (1) Use 40Mhz HT40 chnl width, (0) use 20 MHz legacy chnl width */
+#define RATE_MCS_HT40_POS 11
+#define RATE_MCS_HT40_MSK 0x800
+
+/* Bit 12: (1) Duplicate data on both 20MHz chnls. HT40 (bit 11) must be set. */
+#define RATE_MCS_DUP_POS 12
+#define RATE_MCS_DUP_MSK 0x1000
+
+/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */
+#define RATE_MCS_SGI_POS 13
+#define RATE_MCS_SGI_MSK 0x2000
+
+/**
+ * rate_n_flags Tx antenna masks
+ * 4965 has 2 transmitters
+ * bit14:16
+ */
+#define RATE_MCS_ANT_POS 14
+#define RATE_MCS_ANT_A_MSK 0x04000
+#define RATE_MCS_ANT_B_MSK 0x08000
+#define RATE_MCS_ANT_C_MSK 0x10000
+#define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | RATE_MCS_ANT_B_MSK)
+#define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | RATE_MCS_ANT_C_MSK)
+#define RATE_ANT_NUM 3
+
+#define POWER_TBL_NUM_ENTRIES 33
+#define POWER_TBL_NUM_HT_OFDM_ENTRIES 32
+#define POWER_TBL_CCK_ENTRY 32
+
+#define IL_PWR_NUM_HT_OFDM_ENTRIES 24
+#define IL_PWR_CCK_ENTRIES 2
+
+/**
+ * union il4965_tx_power_dual_stream
+ *
+ * Host format used for C_TX_PWR_TBL, C_CHANNEL_SWITCH
+ * Use __le32 version (struct tx_power_dual_stream) when building command.
+ *
+ * Driver provides radio gain and DSP attenuation settings to device in pairs,
+ * one value for each transmitter chain. The first value is for transmitter A,
+ * second for transmitter B.
+ *
+ * For SISO bit rates, both values in a pair should be identical.
+ * For MIMO rates, one value may be different from the other,
+ * in order to balance the Tx output between the two transmitters.
+ *
+ * See more details in doc for TXPOWER in 4965.h.
+ */
+union il4965_tx_power_dual_stream {
+ struct {
+ u8 radio_tx_gain[2];
+ u8 dsp_predis_atten[2];
+ } s;
+ u32 dw;
+};
+
+/**
+ * struct tx_power_dual_stream
+ *
+ * Table entries in C_TX_PWR_TBL, C_CHANNEL_SWITCH
+ *
+ * Same format as il_tx_power_dual_stream, but __le32
+ */
+struct tx_power_dual_stream {
+ __le32 dw;
+} __packed;
+
+/**
+ * struct il4965_tx_power_db
+ *
+ * Entire table within C_TX_PWR_TBL, C_CHANNEL_SWITCH
+ */
+struct il4965_tx_power_db {
+ struct tx_power_dual_stream power_tbl[POWER_TBL_NUM_ENTRIES];
+} __packed;
+
+/******************************************************************************
+ * (0a)
+ * Alive and Error Commands & Responses:
+ *
+ *****************************************************************************/
+
+#define UCODE_VALID_OK cpu_to_le32(0x1)
+#define INITIALIZE_SUBTYPE (9)
+
+/*
+ * ("Initialize") N_ALIVE = 0x1 (response only, not a command)
+ *
+ * uCode issues this "initialize alive" notification once the initialization
+ * uCode image has completed its work, and is ready to load the runtime image.
+ * This is the *first* "alive" notification that the driver will receive after
+ * rebooting uCode; the "initialize" alive is indicated by subtype field == 9.
+ *
+ * See comments documenting "BSM" (bootstrap state machine).
+ *
+ * For 4965, this notification contains important calibration data for
+ * calculating txpower settings:
+ *
+ * 1) Power supply voltage indication. The voltage sensor outputs higher
+ * values for lower voltage, and vice verse.
+ *
+ * 2) Temperature measurement parameters, for each of two channel widths
+ * (20 MHz and 40 MHz) supported by the radios. Temperature sensing
+ * is done via one of the receiver chains, and channel width influences
+ * the results.
+ *
+ * 3) Tx gain compensation to balance 4965's 2 Tx chains for MIMO operation,
+ * for each of 5 frequency ranges.
+ */
+struct il_init_alive_resp {
+ u8 ucode_minor;
+ u8 ucode_major;
+ __le16 reserved1;
+ u8 sw_rev[8];
+ u8 ver_type;
+ u8 ver_subtype; /* "9" for initialize alive */
+ __le16 reserved2;
+ __le32 log_event_table_ptr;
+ __le32 error_event_table_ptr;
+ __le32 timestamp;
+ __le32 is_valid;
+
+ /* calibration values from "initialize" uCode */
+ __le32 voltage; /* signed, higher value is lower voltage */
+ __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for HT40 */
+ __le32 therm_r2[2]; /* signed */
+ __le32 therm_r3[2]; /* signed */
+ __le32 therm_r4[2]; /* signed */
+ __le32 tx_atten[5][2]; /* signed MIMO gain comp, 5 freq groups,
+ * 2 Tx chains */
+} __packed;
+
+
+/**
+ * N_ALIVE = 0x1 (response only, not a command)
+ *
+ * uCode issues this "alive" notification once the runtime image is ready
+ * to receive commands from the driver. This is the *second* "alive"
+ * notification that the driver will receive after rebooting uCode;
+ * this "alive" is indicated by subtype field != 9.
+ *
+ * See comments documenting "BSM" (bootstrap state machine).
+ *
+ * This response includes two pointers to structures within the device's
+ * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging:
+ *
+ * 1) log_event_table_ptr indicates base of the event log. This traces
+ * a 256-entry history of uCode execution within a circular buffer.
+ * Its header format is:
+ *
+ * __le32 log_size; log capacity (in number of entries)
+ * __le32 type; (1) timestamp with each entry, (0) no timestamp
+ * __le32 wraps; # times uCode has wrapped to top of circular buffer
+ * __le32 write_idx; next circular buffer entry that uCode would fill
+ *
+ * The header is followed by the circular buffer of log entries. Entries
+ * with timestamps have the following format:
+ *
+ * __le32 event_id; range 0 - 1500
+ * __le32 timestamp; low 32 bits of TSF (of network, if associated)
+ * __le32 data; event_id-specific data value
+ *
+ * Entries without timestamps contain only event_id and data.
+ *
+ *
+ * 2) error_event_table_ptr indicates base of the error log. This contains
+ * information about any uCode error that occurs. For 4965, the format
+ * of the error log is:
+ *
+ * __le32 valid; (nonzero) valid, (0) log is empty
+ * __le32 error_id; type of error
+ * __le32 pc; program counter
+ * __le32 blink1; branch link
+ * __le32 blink2; branch link
+ * __le32 ilink1; interrupt link
+ * __le32 ilink2; interrupt link
+ * __le32 data1; error-specific data
+ * __le32 data2; error-specific data
+ * __le32 line; source code line of error
+ * __le32 bcon_time; beacon timer
+ * __le32 tsf_low; network timestamp function timer
+ * __le32 tsf_hi; network timestamp function timer
+ * __le32 gp1; GP1 timer register
+ * __le32 gp2; GP2 timer register
+ * __le32 gp3; GP3 timer register
+ * __le32 ucode_ver; uCode version
+ * __le32 hw_ver; HW Silicon version
+ * __le32 brd_ver; HW board version
+ * __le32 log_pc; log program counter
+ * __le32 frame_ptr; frame pointer
+ * __le32 stack_ptr; stack pointer
+ * __le32 hcmd; last host command
+ * __le32 isr0; isr status register LMPM_NIC_ISR0: rxtx_flag
+ * __le32 isr1; isr status register LMPM_NIC_ISR1: host_flag
+ * __le32 isr2; isr status register LMPM_NIC_ISR2: enc_flag
+ * __le32 isr3; isr status register LMPM_NIC_ISR3: time_flag
+ * __le32 isr4; isr status register LMPM_NIC_ISR4: wico interrupt
+ * __le32 isr_pref; isr status register LMPM_NIC_PREF_STAT
+ * __le32 wait_event; wait event() caller address
+ * __le32 l2p_control; L2pControlField
+ * __le32 l2p_duration; L2pDurationField
+ * __le32 l2p_mhvalid; L2pMhValidBits
+ * __le32 l2p_addr_match; L2pAddrMatchStat
+ * __le32 lmpm_pmg_sel; indicate which clocks are turned on (LMPM_PMG_SEL)
+ * __le32 u_timestamp; indicate when the date and time of the compilation
+ * __le32 reserved;
+ *
+ * The Linux driver can print both logs to the system log when a uCode error
+ * occurs.
+ */
+struct il_alive_resp {
+ u8 ucode_minor;
+ u8 ucode_major;
+ __le16 reserved1;
+ u8 sw_rev[8];
+ u8 ver_type;
+ u8 ver_subtype; /* not "9" for runtime alive */
+ __le16 reserved2;
+ __le32 log_event_table_ptr; /* SRAM address for event log */
+ __le32 error_event_table_ptr; /* SRAM address for error log */
+ __le32 timestamp;
+ __le32 is_valid;
+} __packed;
+
+/*
+ * N_ERROR = 0x2 (response only, not a command)
+ */
+struct il_error_resp {
+ __le32 error_type;
+ u8 cmd_id;
+ u8 reserved1;
+ __le16 bad_cmd_seq_num;
+ __le32 error_info;
+ __le64 timestamp;
+} __packed;
+
+/******************************************************************************
+ * (1)
+ * RXON Commands & Responses:
+ *
+ *****************************************************************************/
+
+/*
+ * Rx config defines & structure
+ */
+/* rx_config device types */
+enum {
+ RXON_DEV_TYPE_AP = 1,
+ RXON_DEV_TYPE_ESS = 3,
+ RXON_DEV_TYPE_IBSS = 4,
+ RXON_DEV_TYPE_SNIFFER = 6,
+};
+
+
+#define RXON_RX_CHAIN_DRIVER_FORCE_MSK cpu_to_le16(0x1 << 0)
+#define RXON_RX_CHAIN_DRIVER_FORCE_POS (0)
+#define RXON_RX_CHAIN_VALID_MSK cpu_to_le16(0x7 << 1)
+#define RXON_RX_CHAIN_VALID_POS (1)
+#define RXON_RX_CHAIN_FORCE_SEL_MSK cpu_to_le16(0x7 << 4)
+#define RXON_RX_CHAIN_FORCE_SEL_POS (4)
+#define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK cpu_to_le16(0x7 << 7)
+#define RXON_RX_CHAIN_FORCE_MIMO_SEL_POS (7)
+#define RXON_RX_CHAIN_CNT_MSK cpu_to_le16(0x3 << 10)
+#define RXON_RX_CHAIN_CNT_POS (10)
+#define RXON_RX_CHAIN_MIMO_CNT_MSK cpu_to_le16(0x3 << 12)
+#define RXON_RX_CHAIN_MIMO_CNT_POS (12)
+#define RXON_RX_CHAIN_MIMO_FORCE_MSK cpu_to_le16(0x1 << 14)
+#define RXON_RX_CHAIN_MIMO_FORCE_POS (14)
+
+/* rx_config flags */
+/* band & modulation selection */
+#define RXON_FLG_BAND_24G_MSK cpu_to_le32(1 << 0)
+#define RXON_FLG_CCK_MSK cpu_to_le32(1 << 1)
+/* auto detection enable */
+#define RXON_FLG_AUTO_DETECT_MSK cpu_to_le32(1 << 2)
+/* TGg protection when tx */
+#define RXON_FLG_TGG_PROTECT_MSK cpu_to_le32(1 << 3)
+/* cck short slot & preamble */
+#define RXON_FLG_SHORT_SLOT_MSK cpu_to_le32(1 << 4)
+#define RXON_FLG_SHORT_PREAMBLE_MSK cpu_to_le32(1 << 5)
+/* antenna selection */
+#define RXON_FLG_DIS_DIV_MSK cpu_to_le32(1 << 7)
+#define RXON_FLG_ANT_SEL_MSK cpu_to_le32(0x0f00)
+#define RXON_FLG_ANT_A_MSK cpu_to_le32(1 << 8)
+#define RXON_FLG_ANT_B_MSK cpu_to_le32(1 << 9)
+/* radar detection enable */
+#define RXON_FLG_RADAR_DETECT_MSK cpu_to_le32(1 << 12)
+#define RXON_FLG_TGJ_NARROW_BAND_MSK cpu_to_le32(1 << 13)
+/* rx response to host with 8-byte TSF
+* (according to ON_AIR deassertion) */
+#define RXON_FLG_TSF2HOST_MSK cpu_to_le32(1 << 15)
+
+
+/* HT flags */
+#define RXON_FLG_CTRL_CHANNEL_LOC_POS (22)
+#define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK cpu_to_le32(0x1 << 22)
+
+#define RXON_FLG_HT_OPERATING_MODE_POS (23)
+
+#define RXON_FLG_HT_PROT_MSK cpu_to_le32(0x1 << 23)
+#define RXON_FLG_HT40_PROT_MSK cpu_to_le32(0x2 << 23)
+
+#define RXON_FLG_CHANNEL_MODE_POS (25)
+#define RXON_FLG_CHANNEL_MODE_MSK cpu_to_le32(0x3 << 25)
+
+/* channel mode */
+enum {
+ CHANNEL_MODE_LEGACY = 0,
+ CHANNEL_MODE_PURE_40 = 1,
+ CHANNEL_MODE_MIXED = 2,
+ CHANNEL_MODE_RESERVED = 3,
+};
+#define RXON_FLG_CHANNEL_MODE_LEGACY \
+ cpu_to_le32(CHANNEL_MODE_LEGACY << RXON_FLG_CHANNEL_MODE_POS)
+#define RXON_FLG_CHANNEL_MODE_PURE_40 \
+ cpu_to_le32(CHANNEL_MODE_PURE_40 << RXON_FLG_CHANNEL_MODE_POS)
+#define RXON_FLG_CHANNEL_MODE_MIXED \
+ cpu_to_le32(CHANNEL_MODE_MIXED << RXON_FLG_CHANNEL_MODE_POS)
+
+/* CTS to self (if spec allows) flag */
+#define RXON_FLG_SELF_CTS_EN cpu_to_le32(0x1<<30)
+
+/* rx_config filter flags */
+/* accept all data frames */
+#define RXON_FILTER_PROMISC_MSK cpu_to_le32(1 << 0)
+/* pass control & management to host */
+#define RXON_FILTER_CTL2HOST_MSK cpu_to_le32(1 << 1)
+/* accept multi-cast */
+#define RXON_FILTER_ACCEPT_GRP_MSK cpu_to_le32(1 << 2)
+/* don't decrypt uni-cast frames */
+#define RXON_FILTER_DIS_DECRYPT_MSK cpu_to_le32(1 << 3)
+/* don't decrypt multi-cast frames */
+#define RXON_FILTER_DIS_GRP_DECRYPT_MSK cpu_to_le32(1 << 4)
+/* STA is associated */
+#define RXON_FILTER_ASSOC_MSK cpu_to_le32(1 << 5)
+/* transfer to host non bssid beacons in associated state */
+#define RXON_FILTER_BCON_AWARE_MSK cpu_to_le32(1 << 6)
+
+/**
+ * C_RXON = 0x10 (command, has simple generic response)
+ *
+ * RXON tunes the radio tuner to a service channel, and sets up a number
+ * of parameters that are used primarily for Rx, but also for Tx operations.
+ *
+ * NOTE: When tuning to a new channel, driver must set the
+ * RXON_FILTER_ASSOC_MSK to 0. This will clear station-dependent
+ * info within the device, including the station tables, tx retry
+ * rate tables, and txpower tables. Driver must build a new station
+ * table and txpower table before transmitting anything on the RXON
+ * channel.
+ *
+ * NOTE: All RXONs wipe clean the internal txpower table. Driver must
+ * issue a new C_TX_PWR_TBL after each C_RXON (0x10),
+ * regardless of whether RXON_FILTER_ASSOC_MSK is set.
+ */
+
+struct il3945_rxon_cmd {
+ u8 node_addr[6];
+ __le16 reserved1;
+ u8 bssid_addr[6];
+ __le16 reserved2;
+ u8 wlap_bssid_addr[6];
+ __le16 reserved3;
+ u8 dev_type;
+ u8 air_propagation;
+ __le16 reserved4;
+ u8 ofdm_basic_rates;
+ u8 cck_basic_rates;
+ __le16 assoc_id;
+ __le32 flags;
+ __le32 filter_flags;
+ __le16 channel;
+ __le16 reserved5;
+} __packed;
+
+struct il4965_rxon_cmd {
+ u8 node_addr[6];
+ __le16 reserved1;
+ u8 bssid_addr[6];
+ __le16 reserved2;
+ u8 wlap_bssid_addr[6];
+ __le16 reserved3;
+ u8 dev_type;
+ u8 air_propagation;
+ __le16 rx_chain;
+ u8 ofdm_basic_rates;
+ u8 cck_basic_rates;
+ __le16 assoc_id;
+ __le32 flags;
+ __le32 filter_flags;
+ __le16 channel;
+ u8 ofdm_ht_single_stream_basic_rates;
+ u8 ofdm_ht_dual_stream_basic_rates;
+} __packed;
+
+/* Create a common rxon cmd which will be typecast into the 3945 or 4965
+ * specific rxon cmd, depending on where it is called from.
+ */
+struct il_rxon_cmd {
+ u8 node_addr[6];
+ __le16 reserved1;
+ u8 bssid_addr[6];
+ __le16 reserved2;
+ u8 wlap_bssid_addr[6];
+ __le16 reserved3;
+ u8 dev_type;
+ u8 air_propagation;
+ __le16 rx_chain;
+ u8 ofdm_basic_rates;
+ u8 cck_basic_rates;
+ __le16 assoc_id;
+ __le32 flags;
+ __le32 filter_flags;
+ __le16 channel;
+ u8 ofdm_ht_single_stream_basic_rates;
+ u8 ofdm_ht_dual_stream_basic_rates;
+ u8 reserved4;
+ u8 reserved5;
+} __packed;
+
+
+/*
+ * C_RXON_ASSOC = 0x11 (command, has simple generic response)
+ */
+struct il3945_rxon_assoc_cmd {
+ __le32 flags;
+ __le32 filter_flags;
+ u8 ofdm_basic_rates;
+ u8 cck_basic_rates;
+ __le16 reserved;
+} __packed;
+
+struct il4965_rxon_assoc_cmd {
+ __le32 flags;
+ __le32 filter_flags;
+ u8 ofdm_basic_rates;
+ u8 cck_basic_rates;
+ u8 ofdm_ht_single_stream_basic_rates;
+ u8 ofdm_ht_dual_stream_basic_rates;
+ __le16 rx_chain_select_flags;
+ __le16 reserved;
+} __packed;
+
+#define IL_CONN_MAX_LISTEN_INTERVAL 10
+#define IL_MAX_UCODE_BEACON_INTERVAL 4 /* 4096 */
+#define IL39_MAX_UCODE_BEACON_INTERVAL 1 /* 1024 */
+
+/*
+ * C_RXON_TIMING = 0x14 (command, has simple generic response)
+ */
+struct il_rxon_time_cmd {
+ __le64 timestamp;
+ __le16 beacon_interval;
+ __le16 atim_win;
+ __le32 beacon_init_val;
+ __le16 listen_interval;
+ u8 dtim_period;
+ u8 delta_cp_bss_tbtts;
+} __packed;
+
+/*
+ * C_CHANNEL_SWITCH = 0x72 (command, has simple generic response)
+ */
+struct il3945_channel_switch_cmd {
+ u8 band;
+ u8 expect_beacon;
+ __le16 channel;
+ __le32 rxon_flags;
+ __le32 rxon_filter_flags;
+ __le32 switch_time;
+ struct il3945_power_per_rate power[IL_MAX_RATES];
+} __packed;
+
+struct il4965_channel_switch_cmd {
+ u8 band;
+ u8 expect_beacon;
+ __le16 channel;
+ __le32 rxon_flags;
+ __le32 rxon_filter_flags;
+ __le32 switch_time;
+ struct il4965_tx_power_db tx_power;
+} __packed;
+
+/*
+ * N_CHANNEL_SWITCH = 0x73 (notification only, not a command)
+ */
+struct il_csa_notification {
+ __le16 band;
+ __le16 channel;
+ __le32 status; /* 0 - OK, 1 - fail */
+} __packed;
+
+/******************************************************************************
+ * (2)
+ * Quality-of-Service (QOS) Commands & Responses:
+ *
+ *****************************************************************************/
+
+/**
+ * struct il_ac_qos -- QOS timing params for C_QOS_PARAM
+ * One for each of 4 EDCA access categories in struct il_qosparam_cmd
+ *
+ * @cw_min: Contention win, start value in numbers of slots.
+ * Should be a power-of-2, minus 1. Device's default is 0x0f.
+ * @cw_max: Contention win, max value in numbers of slots.
+ * Should be a power-of-2, minus 1. Device's default is 0x3f.
+ * @aifsn: Number of slots in Arbitration Interframe Space (before
+ * performing random backoff timing prior to Tx). Device default 1.
+ * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0.
+ *
+ * Device will automatically increase contention win by (2*CW) + 1 for each
+ * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW
+ * value, to cap the CW value.
+ */
+struct il_ac_qos {
+ __le16 cw_min;
+ __le16 cw_max;
+ u8 aifsn;
+ u8 reserved1;
+ __le16 edca_txop;
+} __packed;
+
+/* QoS flags defines */
+#define QOS_PARAM_FLG_UPDATE_EDCA_MSK cpu_to_le32(0x01)
+#define QOS_PARAM_FLG_TGN_MSK cpu_to_le32(0x02)
+#define QOS_PARAM_FLG_TXOP_TYPE_MSK cpu_to_le32(0x10)
+
+/* Number of Access Categories (AC) (EDCA), queues 0..3 */
+#define AC_NUM 4
+
+/*
+ * C_QOS_PARAM = 0x13 (command, has simple generic response)
+ *
+ * This command sets up timings for each of the 4 prioritized EDCA Tx FIFOs
+ * 0: Background, 1: Best Effort, 2: Video, 3: Voice.
+ */
+struct il_qosparam_cmd {
+ __le32 qos_flags;
+ struct il_ac_qos ac[AC_NUM];
+} __packed;
+
+/******************************************************************************
+ * (3)
+ * Add/Modify Stations Commands & Responses:
+ *
+ *****************************************************************************/
+/*
+ * Multi station support
+ */
+
+/* Special, dedicated locations within device's station table */
+#define IL_AP_ID 0
+#define IL_STA_ID 2
+#define IL3945_BROADCAST_ID 24
+#define IL3945_STATION_COUNT 25
+#define IL4965_BROADCAST_ID 31
+#define IL4965_STATION_COUNT 32
+
+#define IL_STATION_COUNT 32 /* MAX(3945,4965)*/
+#define IL_INVALID_STATION 255
+
+#define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2)
+#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8)
+#define STA_FLG_RTS_MIMO_PROT_MSK cpu_to_le32(1 << 17)
+#define STA_FLG_AGG_MPDU_8US_MSK cpu_to_le32(1 << 18)
+#define STA_FLG_MAX_AGG_SIZE_POS (19)
+#define STA_FLG_MAX_AGG_SIZE_MSK cpu_to_le32(3 << 19)
+#define STA_FLG_HT40_EN_MSK cpu_to_le32(1 << 21)
+#define STA_FLG_MIMO_DIS_MSK cpu_to_le32(1 << 22)
+#define STA_FLG_AGG_MPDU_DENSITY_POS (23)
+#define STA_FLG_AGG_MPDU_DENSITY_MSK cpu_to_le32(7 << 23)
+
+/* Use in mode field. 1: modify existing entry, 0: add new station entry */
+#define STA_CONTROL_MODIFY_MSK 0x01
+
+/* key flags __le16*/
+#define STA_KEY_FLG_ENCRYPT_MSK cpu_to_le16(0x0007)
+#define STA_KEY_FLG_NO_ENC cpu_to_le16(0x0000)
+#define STA_KEY_FLG_WEP cpu_to_le16(0x0001)
+#define STA_KEY_FLG_CCMP cpu_to_le16(0x0002)
+#define STA_KEY_FLG_TKIP cpu_to_le16(0x0003)
+
+#define STA_KEY_FLG_KEYID_POS 8
+#define STA_KEY_FLG_INVALID cpu_to_le16(0x0800)
+/* wep key is either from global key (0) or from station info array (1) */
+#define STA_KEY_FLG_MAP_KEY_MSK cpu_to_le16(0x0008)
+
+/* wep key in STA: 5-bytes (0) or 13-bytes (1) */
+#define STA_KEY_FLG_KEY_SIZE_MSK cpu_to_le16(0x1000)
+#define STA_KEY_MULTICAST_MSK cpu_to_le16(0x4000)
+#define STA_KEY_MAX_NUM 8
+
+/* Flags indicate whether to modify vs. don't change various station params */
+#define STA_MODIFY_KEY_MASK 0x01
+#define STA_MODIFY_TID_DISABLE_TX 0x02
+#define STA_MODIFY_TX_RATE_MSK 0x04
+#define STA_MODIFY_ADDBA_TID_MSK 0x08
+#define STA_MODIFY_DELBA_TID_MSK 0x10
+#define STA_MODIFY_SLEEP_TX_COUNT_MSK 0x20
+
+/* Receiver address (actually, Rx station's idx into station table),
+ * combined with Traffic ID (QOS priority), in format used by Tx Scheduler */
+#define BUILD_RAxTID(sta_id, tid) (((sta_id) << 4) + (tid))
+
+struct il4965_keyinfo {
+ __le16 key_flags;
+ u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */
+ u8 reserved1;
+ __le16 tkip_rx_ttak[5]; /* 10-byte unicast TKIP TTAK */
+ u8 key_offset;
+ u8 reserved2;
+ u8 key[16]; /* 16-byte unicast decryption key */
+} __packed;
+
+/**
+ * struct sta_id_modify
+ * @addr[ETH_ALEN]: station's MAC address
+ * @sta_id: idx of station in uCode's station table
+ * @modify_mask: STA_MODIFY_*, 1: modify, 0: don't change
+ *
+ * Driver selects unused table idx when adding new station,
+ * or the idx to a pre-existing station entry when modifying that station.
+ * Some idxes have special purposes (IL_AP_ID, idx 0, is for AP).
+ *
+ * modify_mask flags select which parameters to modify vs. leave alone.
+ */
+struct sta_id_modify {
+ u8 addr[ETH_ALEN];
+ __le16 reserved1;
+ u8 sta_id;
+ u8 modify_mask;
+ __le16 reserved2;
+} __packed;
+
+/*
+ * C_ADD_STA = 0x18 (command)
+ *
+ * The device contains an internal table of per-station information,
+ * with info on security keys, aggregation parameters, and Tx rates for
+ * initial Tx attempt and any retries (4965 devices uses
+ * C_TX_LINK_QUALITY_CMD,
+ * 3945 uses C_RATE_SCALE to set up rate tables).
+ *
+ * C_ADD_STA sets up the table entry for one station, either creating
+ * a new entry, or modifying a pre-existing one.
+ *
+ * NOTE: RXON command (without "associated" bit set) wipes the station table
+ * clean. Moving into RF_KILL state does this also. Driver must set up
+ * new station table before transmitting anything on the RXON channel
+ * (except active scans or active measurements; those commands carry
+ * their own txpower/rate setup data).
+ *
+ * When getting started on a new channel, driver must set up the
+ * IL_BROADCAST_ID entry (last entry in the table). For a client
+ * station in a BSS, once an AP is selected, driver sets up the AP STA
+ * in the IL_AP_ID entry (1st entry in the table). BROADCAST and AP
+ * are all that are needed for a BSS client station. If the device is
+ * used as AP, or in an IBSS network, driver must set up station table
+ * entries for all STAs in network, starting with idx IL_STA_ID.
+ */
+
+struct il3945_addsta_cmd {
+ u8 mode; /* 1: modify existing, 0: add new station */
+ u8 reserved[3];
+ struct sta_id_modify sta;
+ struct il4965_keyinfo key;
+ __le32 station_flags; /* STA_FLG_* */
+ __le32 station_flags_msk; /* STA_FLG_* */
+
+ /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID)
+ * corresponding to bit (e.g. bit 5 controls TID 5).
+ * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
+ __le16 tid_disable_tx;
+
+ __le16 rate_n_flags;
+
+ /* TID for which to add block-ack support.
+ * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+ u8 add_immediate_ba_tid;
+
+ /* TID for which to remove block-ack support.
+ * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */
+ u8 remove_immediate_ba_tid;
+
+ /* Starting Sequence Number for added block-ack support.
+ * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+ __le16 add_immediate_ba_ssn;
+} __packed;
+
+struct il4965_addsta_cmd {
+ u8 mode; /* 1: modify existing, 0: add new station */
+ u8 reserved[3];
+ struct sta_id_modify sta;
+ struct il4965_keyinfo key;
+ __le32 station_flags; /* STA_FLG_* */
+ __le32 station_flags_msk; /* STA_FLG_* */
+
+ /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID)
+ * corresponding to bit (e.g. bit 5 controls TID 5).
+ * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
+ __le16 tid_disable_tx;
+
+ __le16 reserved1;
+
+ /* TID for which to add block-ack support.
+ * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+ u8 add_immediate_ba_tid;
+
+ /* TID for which to remove block-ack support.
+ * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */
+ u8 remove_immediate_ba_tid;
+
+ /* Starting Sequence Number for added block-ack support.
+ * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+ __le16 add_immediate_ba_ssn;
+
+ /*
+ * Number of packets OK to transmit to station even though
+ * it is asleep -- used to synchronise PS-poll and u-APSD
+ * responses while ucode keeps track of STA sleep state.
+ */
+ __le16 sleep_tx_count;
+
+ __le16 reserved2;
+} __packed;
+
+/* Wrapper struct for 3945 and 4965 addsta_cmd structures */
+struct il_addsta_cmd {
+ u8 mode; /* 1: modify existing, 0: add new station */
+ u8 reserved[3];
+ struct sta_id_modify sta;
+ struct il4965_keyinfo key;
+ __le32 station_flags; /* STA_FLG_* */
+ __le32 station_flags_msk; /* STA_FLG_* */
+
+ /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID)
+ * corresponding to bit (e.g. bit 5 controls TID 5).
+ * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
+ __le16 tid_disable_tx;
+
+ __le16 rate_n_flags; /* 3945 only */
+
+ /* TID for which to add block-ack support.
+ * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+ u8 add_immediate_ba_tid;
+
+ /* TID for which to remove block-ack support.
+ * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */
+ u8 remove_immediate_ba_tid;
+
+ /* Starting Sequence Number for added block-ack support.
+ * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
+ __le16 add_immediate_ba_ssn;
+
+ /*
+ * Number of packets OK to transmit to station even though
+ * it is asleep -- used to synchronise PS-poll and u-APSD
+ * responses while ucode keeps track of STA sleep state.
+ */
+ __le16 sleep_tx_count;
+
+ __le16 reserved2;
+} __packed;
+
+
+#define ADD_STA_SUCCESS_MSK 0x1
+#define ADD_STA_NO_ROOM_IN_TBL 0x2
+#define ADD_STA_NO_BLOCK_ACK_RESOURCE 0x4
+#define ADD_STA_MODIFY_NON_EXIST_STA 0x8
+/*
+ * C_ADD_STA = 0x18 (response)
+ */
+struct il_add_sta_resp {
+ u8 status; /* ADD_STA_* */
+} __packed;
+
+#define REM_STA_SUCCESS_MSK 0x1
+/*
+ * C_REM_STA = 0x19 (response)
+ */
+struct il_rem_sta_resp {
+ u8 status;
+} __packed;
+
+/*
+ * C_REM_STA = 0x19 (command)
+ */
+struct il_rem_sta_cmd {
+ u8 num_sta; /* number of removed stations */
+ u8 reserved[3];
+ u8 addr[ETH_ALEN]; /* MAC addr of the first station */
+ u8 reserved2[2];
+} __packed;
+
+#define IL_TX_FIFO_BK_MSK cpu_to_le32(BIT(0))
+#define IL_TX_FIFO_BE_MSK cpu_to_le32(BIT(1))
+#define IL_TX_FIFO_VI_MSK cpu_to_le32(BIT(2))
+#define IL_TX_FIFO_VO_MSK cpu_to_le32(BIT(3))
+#define IL_AGG_TX_QUEUE_MSK cpu_to_le32(0xffc00)
+
+#define IL_DROP_SINGLE 0
+#define IL_DROP_SELECTED 1
+#define IL_DROP_ALL 2
+
+/*
+ * REPLY_WEP_KEY = 0x20
+ */
+struct il_wep_key {
+ u8 key_idx;
+ u8 key_offset;
+ u8 reserved1[2];
+ u8 key_size;
+ u8 reserved2[3];
+ u8 key[16];
+} __packed;
+
+struct il_wep_cmd {
+ u8 num_keys;
+ u8 global_key_type;
+ u8 flags;
+ u8 reserved;
+ struct il_wep_key key[0];
+} __packed;
+
+#define WEP_KEY_WEP_TYPE 1
+#define WEP_KEYS_MAX 4
+#define WEP_INVALID_OFFSET 0xff
+#define WEP_KEY_LEN_64 5
+#define WEP_KEY_LEN_128 13
+
+/******************************************************************************
+ * (4)
+ * Rx Responses:
+ *
+ *****************************************************************************/
+
+#define RX_RES_STATUS_NO_CRC32_ERROR cpu_to_le32(1 << 0)
+#define RX_RES_STATUS_NO_RXE_OVERFLOW cpu_to_le32(1 << 1)
+
+#define RX_RES_PHY_FLAGS_BAND_24_MSK cpu_to_le16(1 << 0)
+#define RX_RES_PHY_FLAGS_MOD_CCK_MSK cpu_to_le16(1 << 1)
+#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2)
+#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3)
+#define RX_RES_PHY_FLAGS_ANTENNA_MSK 0xf0
+#define RX_RES_PHY_FLAGS_ANTENNA_POS 4
+
+#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8)
+#define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8)
+#define RX_RES_STATUS_SEC_TYPE_WEP (0x1 << 8)
+#define RX_RES_STATUS_SEC_TYPE_CCMP (0x2 << 8)
+#define RX_RES_STATUS_SEC_TYPE_TKIP (0x3 << 8)
+#define RX_RES_STATUS_SEC_TYPE_ERR (0x7 << 8)
+
+#define RX_RES_STATUS_STATION_FOUND (1<<6)
+#define RX_RES_STATUS_NO_STATION_INFO_MISMATCH (1<<7)
+
+#define RX_RES_STATUS_DECRYPT_TYPE_MSK (0x3 << 11)
+#define RX_RES_STATUS_NOT_DECRYPT (0x0 << 11)
+#define RX_RES_STATUS_DECRYPT_OK (0x3 << 11)
+#define RX_RES_STATUS_BAD_ICV_MIC (0x1 << 11)
+#define RX_RES_STATUS_BAD_KEY_TTAK (0x2 << 11)
+
+#define RX_MPDU_RES_STATUS_ICV_OK (0x20)
+#define RX_MPDU_RES_STATUS_MIC_OK (0x40)
+#define RX_MPDU_RES_STATUS_TTAK_OK (1 << 7)
+#define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800)
+
+
+struct il3945_rx_frame_stats {
+ u8 phy_count;
+ u8 id;
+ u8 rssi;
+ u8 agc;
+ __le16 sig_avg;
+ __le16 noise_diff;
+ u8 payload[0];
+} __packed;
+
+struct il3945_rx_frame_hdr {
+ __le16 channel;
+ __le16 phy_flags;
+ u8 reserved1;
+ u8 rate;
+ __le16 len;
+ u8 payload[0];
+} __packed;
+
+struct il3945_rx_frame_end {
+ __le32 status;
+ __le64 timestamp;
+ __le32 beacon_timestamp;
+} __packed;
+
+/*
+ * N_3945_RX = 0x1b (response only, not a command)
+ *
+ * NOTE: DO NOT dereference from casts to this structure
+ * It is provided only for calculating minimum data set size.
+ * The actual offsets of the hdr and end are dynamic based on
+ * stats.phy_count
+ */
+struct il3945_rx_frame {
+ struct il3945_rx_frame_stats stats;
+ struct il3945_rx_frame_hdr hdr;
+ struct il3945_rx_frame_end end;
+} __packed;
+
+#define IL39_RX_FRAME_SIZE (4 + sizeof(struct il3945_rx_frame))
+
+/* Fixed (non-configurable) rx data from phy */
+
+#define IL49_RX_RES_PHY_CNT 14
+#define IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET (4)
+#define IL49_RX_PHY_FLAGS_ANTENNAE_MASK (0x70)
+#define IL49_AGC_DB_MASK (0x3f80) /* MASK(7,13) */
+#define IL49_AGC_DB_POS (7)
+struct il4965_rx_non_cfg_phy {
+ __le16 ant_selection; /* ant A bit 4, ant B bit 5, ant C bit 6 */
+ __le16 agc_info; /* agc code 0:6, agc dB 7:13, reserved 14:15 */
+ u8 rssi_info[6]; /* we use even entries, 0/2/4 for A/B/C rssi */
+ u8 pad[0];
+} __packed;
+
+
+/*
+ * N_RX = 0xc3 (response only, not a command)
+ * Used only for legacy (non 11n) frames.
+ */
+struct il_rx_phy_res {
+ u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */
+ u8 cfg_phy_cnt; /* configurable DSP phy data byte count */
+ u8 stat_id; /* configurable DSP phy data set ID */
+ u8 reserved1;
+ __le64 timestamp; /* TSF at on air rise */
+ __le32 beacon_time_stamp; /* beacon at on-air rise */
+ __le16 phy_flags; /* general phy flags: band, modulation, ... */
+ __le16 channel; /* channel number */
+ u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */
+ __le32 rate_n_flags; /* RATE_MCS_* */
+ __le16 byte_count; /* frame's byte-count */
+ __le16 frame_time; /* frame's time on the air */
+} __packed;
+
+struct il_rx_mpdu_res_start {
+ __le16 byte_count;
+ __le16 reserved;
+} __packed;
+
+
+/******************************************************************************
+ * (5)
+ * Tx Commands & Responses:
+ *
+ * Driver must place each C_TX command into one of the prioritized Tx
+ * queues in host DRAM, shared between driver and device (see comments for
+ * SCD registers and Tx/Rx Queues). When the device's Tx scheduler and uCode
+ * are preparing to transmit, the device pulls the Tx command over the PCI
+ * bus via one of the device's Tx DMA channels, to fill an internal FIFO
+ * from which data will be transmitted.
+ *
+ * uCode handles all timing and protocol related to control frames
+ * (RTS/CTS/ACK), based on flags in the Tx command. uCode and Tx scheduler
+ * handle reception of block-acks; uCode updates the host driver via
+ * N_COMPRESSED_BA.
+ *
+ * uCode handles retrying Tx when an ACK is expected but not received.
+ * This includes trying lower data rates than the one requested in the Tx
+ * command, as set up by the C_RATE_SCALE (for 3945) or
+ * C_TX_LINK_QUALITY_CMD (4965).
+ *
+ * Driver sets up transmit power for various rates via C_TX_PWR_TBL.
+ * This command must be executed after every RXON command, before Tx can occur.
+ *****************************************************************************/
+
+/* C_TX Tx flags field */
+
+/*
+ * 1: Use Request-To-Send protocol before this frame.
+ * Mutually exclusive vs. TX_CMD_FLG_CTS_MSK.
+ */
+#define TX_CMD_FLG_RTS_MSK cpu_to_le32(1 << 1)
+
+/*
+ * 1: Transmit Clear-To-Send to self before this frame.
+ * Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames.
+ * Mutually exclusive vs. TX_CMD_FLG_RTS_MSK.
+ */
+#define TX_CMD_FLG_CTS_MSK cpu_to_le32(1 << 2)
+
+/* 1: Expect ACK from receiving station
+ * 0: Don't expect ACK (MAC header's duration field s/b 0)
+ * Set this for unicast frames, but not broadcast/multicast. */
+#define TX_CMD_FLG_ACK_MSK cpu_to_le32(1 << 3)
+
+/* For 4965 devices:
+ * 1: Use rate scale table (see C_TX_LINK_QUALITY_CMD).
+ * Tx command's initial_rate_idx indicates first rate to try;
+ * uCode walks through table for additional Tx attempts.
+ * 0: Use Tx rate/MCS from Tx command's rate_n_flags field.
+ * This rate will be used for all Tx attempts; it will not be scaled. */
+#define TX_CMD_FLG_STA_RATE_MSK cpu_to_le32(1 << 4)
+
+/* 1: Expect immediate block-ack.
+ * Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */
+#define TX_CMD_FLG_IMM_BA_RSP_MASK cpu_to_le32(1 << 6)
+
+/*
+ * 1: Frame requires full Tx-Op protection.
+ * Set this if either RTS or CTS Tx Flag gets set.
+ */
+#define TX_CMD_FLG_FULL_TXOP_PROT_MSK cpu_to_le32(1 << 7)
+
+/* Tx antenna selection field; used only for 3945, reserved (0) for 4965 devices.
+ * Set field to "0" to allow 3945 uCode to select antenna (normal usage). */
+#define TX_CMD_FLG_ANT_SEL_MSK cpu_to_le32(0xf00)
+#define TX_CMD_FLG_ANT_A_MSK cpu_to_le32(1 << 8)
+#define TX_CMD_FLG_ANT_B_MSK cpu_to_le32(1 << 9)
+
+/* 1: uCode overrides sequence control field in MAC header.
+ * 0: Driver provides sequence control field in MAC header.
+ * Set this for management frames, non-QOS data frames, non-unicast frames,
+ * and also in Tx command embedded in C_SCAN for active scans. */
+#define TX_CMD_FLG_SEQ_CTL_MSK cpu_to_le32(1 << 13)
+
+/* 1: This frame is non-last MPDU; more fragments are coming.
+ * 0: Last fragment, or not using fragmentation. */
+#define TX_CMD_FLG_MORE_FRAG_MSK cpu_to_le32(1 << 14)
+
+/* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame.
+ * 0: No TSF required in outgoing frame.
+ * Set this for transmitting beacons and probe responses. */
+#define TX_CMD_FLG_TSF_MSK cpu_to_le32(1 << 16)
+
+/* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword
+ * alignment of frame's payload data field.
+ * 0: No pad
+ * Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4
+ * field (but not both). Driver must align frame data (i.e. data following
+ * MAC header) to DWORD boundary. */
+#define TX_CMD_FLG_MH_PAD_MSK cpu_to_le32(1 << 20)
+
+/* accelerate aggregation support
+ * 0 - no CCMP encryption; 1 - CCMP encryption */
+#define TX_CMD_FLG_AGG_CCMP_MSK cpu_to_le32(1 << 22)
+
+/* HCCA-AP - disable duration overwriting. */
+#define TX_CMD_FLG_DUR_MSK cpu_to_le32(1 << 25)
+
+
+/*
+ * TX command security control
+ */
+#define TX_CMD_SEC_WEP 0x01
+#define TX_CMD_SEC_CCM 0x02
+#define TX_CMD_SEC_TKIP 0x03
+#define TX_CMD_SEC_MSK 0x03
+#define TX_CMD_SEC_SHIFT 6
+#define TX_CMD_SEC_KEY128 0x08
+
+/*
+ * security overhead sizes
+ */
+#define WEP_IV_LEN 4
+#define WEP_ICV_LEN 4
+#define CCMP_MIC_LEN 8
+#define TKIP_ICV_LEN 4
+
+/*
+ * C_TX = 0x1c (command)
+ */
+
+struct il3945_tx_cmd {
+ /*
+ * MPDU byte count:
+ * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size,
+ * + 8 byte IV for CCM or TKIP (not used for WEP)
+ * + Data payload
+ * + 8-byte MIC (not used for CCM/WEP)
+ * NOTE: Does not include Tx command bytes, post-MAC pad bytes,
+ * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i
+ * Range: 14-2342 bytes.
+ */
+ __le16 len;
+
+ /*
+ * MPDU or MSDU byte count for next frame.
+ * Used for fragmentation and bursting, but not 11n aggregation.
+ * Same as "len", but for next frame. Set to 0 if not applicable.
+ */
+ __le16 next_frame_len;
+
+ __le32 tx_flags; /* TX_CMD_FLG_* */
+
+ u8 rate;
+
+ /* Index of recipient station in uCode's station table */
+ u8 sta_id;
+ u8 tid_tspec;
+ u8 sec_ctl;
+ u8 key[16];
+ union {
+ u8 byte[8];
+ __le16 word[4];
+ __le32 dw[2];
+ } tkip_mic;
+ __le32 next_frame_info;
+ union {
+ __le32 life_time;
+ __le32 attempt;
+ } stop_time;
+ u8 supp_rates[2];
+ u8 rts_retry_limit; /*byte 50 */
+ u8 data_retry_limit; /*byte 51 */
+ union {
+ __le16 pm_frame_timeout;
+ __le16 attempt_duration;
+ } timeout;
+
+ /*
+ * Duration of EDCA burst Tx Opportunity, in 32-usec units.
+ * Set this if txop time is not specified by HCCA protocol (e.g. by AP).
+ */
+ __le16 driver_txop;
+
+ /*
+ * MAC header goes here, followed by 2 bytes padding if MAC header
+ * length is 26 or 30 bytes, followed by payload data
+ */
+ u8 payload[0];
+ struct ieee80211_hdr hdr[0];
+} __packed;
+
+/*
+ * C_TX = 0x1c (response)
+ */
+struct il3945_tx_resp {
+ u8 failure_rts;
+ u8 failure_frame;
+ u8 bt_kill_count;
+ u8 rate;
+ __le32 wireless_media_time;
+ __le32 status; /* TX status */
+} __packed;
+
+
+/*
+ * 4965 uCode updates these Tx attempt count values in host DRAM.
+ * Used for managing Tx retries when expecting block-acks.
+ * Driver should set these fields to 0.
+ */
+struct il_dram_scratch {
+ u8 try_cnt; /* Tx attempts */
+ u8 bt_kill_cnt; /* Tx attempts blocked by Bluetooth device */
+ __le16 reserved;
+} __packed;
+
+struct il_tx_cmd {
+ /*
+ * MPDU byte count:
+ * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size,
+ * + 8 byte IV for CCM or TKIP (not used for WEP)
+ * + Data payload
+ * + 8-byte MIC (not used for CCM/WEP)
+ * NOTE: Does not include Tx command bytes, post-MAC pad bytes,
+ * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i
+ * Range: 14-2342 bytes.
+ */
+ __le16 len;
+
+ /*
+ * MPDU or MSDU byte count for next frame.
+ * Used for fragmentation and bursting, but not 11n aggregation.
+ * Same as "len", but for next frame. Set to 0 if not applicable.
+ */
+ __le16 next_frame_len;
+
+ __le32 tx_flags; /* TX_CMD_FLG_* */
+
+ /* uCode may modify this field of the Tx command (in host DRAM!).
+ * Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */
+ struct il_dram_scratch scratch;
+
+ /* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */
+ __le32 rate_n_flags; /* RATE_MCS_* */
+
+ /* Index of destination station in uCode's station table */
+ u8 sta_id;
+
+ /* Type of security encryption: CCM or TKIP */
+ u8 sec_ctl; /* TX_CMD_SEC_* */
+
+ /*
+ * Index into rate table (see C_TX_LINK_QUALITY_CMD) for initial
+ * Tx attempt, if TX_CMD_FLG_STA_RATE_MSK is set. Normally "0" for
+ * data frames, this field may be used to selectively reduce initial
+ * rate (via non-0 value) for special frames (e.g. management), while
+ * still supporting rate scaling for all frames.
+ */
+ u8 initial_rate_idx;
+ u8 reserved;
+ u8 key[16];
+ __le16 next_frame_flags;
+ __le16 reserved2;
+ union {
+ __le32 life_time;
+ __le32 attempt;
+ } stop_time;
+
+ /* Host DRAM physical address pointer to "scratch" in this command.
+ * Must be dword aligned. "0" in dram_lsb_ptr disables usage. */
+ __le32 dram_lsb_ptr;
+ u8 dram_msb_ptr;
+
+ u8 rts_retry_limit; /*byte 50 */
+ u8 data_retry_limit; /*byte 51 */
+ u8 tid_tspec;
+ union {
+ __le16 pm_frame_timeout;
+ __le16 attempt_duration;
+ } timeout;
+
+ /*
+ * Duration of EDCA burst Tx Opportunity, in 32-usec units.
+ * Set this if txop time is not specified by HCCA protocol (e.g. by AP).
+ */
+ __le16 driver_txop;
+
+ /*
+ * MAC header goes here, followed by 2 bytes padding if MAC header
+ * length is 26 or 30 bytes, followed by payload data
+ */
+ u8 payload[0];
+ struct ieee80211_hdr hdr[0];
+} __packed;
+
+/* TX command response is sent after *3945* transmission attempts.
+ *
+ * NOTES:
+ *
+ * TX_STATUS_FAIL_NEXT_FRAG
+ *
+ * If the fragment flag in the MAC header for the frame being transmitted
+ * is set and there is insufficient time to transmit the next frame, the
+ * TX status will be returned with 'TX_STATUS_FAIL_NEXT_FRAG'.
+ *
+ * TX_STATUS_FIFO_UNDERRUN
+ *
+ * Indicates the host did not provide bytes to the FIFO fast enough while
+ * a TX was in progress.
+ *
+ * TX_STATUS_FAIL_MGMNT_ABORT
+ *
+ * This status is only possible if the ABORT ON MGMT RX parameter was
+ * set to true with the TX command.
+ *
+ * If the MSB of the status parameter is set then an abort sequence is
+ * required. This sequence consists of the host activating the TX Abort
+ * control line, and then waiting for the TX Abort command response. This
+ * indicates that a the device is no longer in a transmit state, and that the
+ * command FIFO has been cleared. The host must then deactivate the TX Abort
+ * control line. Receiving is still allowed in this case.
+ */
+enum {
+ TX_3945_STATUS_SUCCESS = 0x01,
+ TX_3945_STATUS_DIRECT_DONE = 0x02,
+ TX_3945_STATUS_FAIL_SHORT_LIMIT = 0x82,
+ TX_3945_STATUS_FAIL_LONG_LIMIT = 0x83,
+ TX_3945_STATUS_FAIL_FIFO_UNDERRUN = 0x84,
+ TX_3945_STATUS_FAIL_MGMNT_ABORT = 0x85,
+ TX_3945_STATUS_FAIL_NEXT_FRAG = 0x86,
+ TX_3945_STATUS_FAIL_LIFE_EXPIRE = 0x87,
+ TX_3945_STATUS_FAIL_DEST_PS = 0x88,
+ TX_3945_STATUS_FAIL_ABORTED = 0x89,
+ TX_3945_STATUS_FAIL_BT_RETRY = 0x8a,
+ TX_3945_STATUS_FAIL_STA_INVALID = 0x8b,
+ TX_3945_STATUS_FAIL_FRAG_DROPPED = 0x8c,
+ TX_3945_STATUS_FAIL_TID_DISABLE = 0x8d,
+ TX_3945_STATUS_FAIL_FRAME_FLUSHED = 0x8e,
+ TX_3945_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f,
+ TX_3945_STATUS_FAIL_TX_LOCKED = 0x90,
+ TX_3945_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91,
+};
+
+/*
+ * TX command response is sent after *4965* transmission attempts.
+ *
+ * both postpone and abort status are expected behavior from uCode. there is
+ * no special operation required from driver; except for RFKILL_FLUSH,
+ * which required tx flush host command to flush all the tx frames in queues
+ */
+enum {
+ TX_STATUS_SUCCESS = 0x01,
+ TX_STATUS_DIRECT_DONE = 0x02,
+ /* postpone TX */
+ TX_STATUS_POSTPONE_DELAY = 0x40,
+ TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
+ TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
+ TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
+ /* abort TX */
+ TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
+ TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
+ TX_STATUS_FAIL_LONG_LIMIT = 0x83,
+ TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84,
+ TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
+ TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
+ TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
+ TX_STATUS_FAIL_DEST_PS = 0x88,
+ TX_STATUS_FAIL_HOST_ABORTED = 0x89,
+ TX_STATUS_FAIL_BT_RETRY = 0x8a,
+ TX_STATUS_FAIL_STA_INVALID = 0x8b,
+ TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
+ TX_STATUS_FAIL_TID_DISABLE = 0x8d,
+ TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
+ TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f,
+ TX_STATUS_FAIL_PASSIVE_NO_RX = 0x90,
+ TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91,
+};
+
+#define TX_PACKET_MODE_REGULAR 0x0000
+#define TX_PACKET_MODE_BURST_SEQ 0x0100
+#define TX_PACKET_MODE_BURST_FIRST 0x0200
+
+enum {
+ TX_POWER_PA_NOT_ACTIVE = 0x0,
+};
+
+enum {
+ TX_STATUS_MSK = 0x000000ff, /* bits 0:7 */
+ TX_STATUS_DELAY_MSK = 0x00000040,
+ TX_STATUS_ABORT_MSK = 0x00000080,
+ TX_PACKET_MODE_MSK = 0x0000ff00, /* bits 8:15 */
+ TX_FIFO_NUMBER_MSK = 0x00070000, /* bits 16:18 */
+ TX_RESERVED = 0x00780000, /* bits 19:22 */
+ TX_POWER_PA_DETECT_MSK = 0x7f800000, /* bits 23:30 */
+ TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */
+};
+
+/* *******************************
+ * TX aggregation status
+ ******************************* */
+
+enum {
+ AGG_TX_STATE_TRANSMITTED = 0x00,
+ AGG_TX_STATE_UNDERRUN_MSK = 0x01,
+ AGG_TX_STATE_FEW_BYTES_MSK = 0x04,
+ AGG_TX_STATE_ABORT_MSK = 0x08,
+ AGG_TX_STATE_LAST_SENT_TTL_MSK = 0x10,
+ AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK = 0x20,
+ AGG_TX_STATE_SCD_QUERY_MSK = 0x80,
+ AGG_TX_STATE_TEST_BAD_CRC32_MSK = 0x100,
+ AGG_TX_STATE_RESPONSE_MSK = 0x1ff,
+ AGG_TX_STATE_DUMP_TX_MSK = 0x200,
+ AGG_TX_STATE_DELAY_TX_MSK = 0x400
+};
+
+#define AGG_TX_STATUS_MSK 0x00000fff /* bits 0:11 */
+#define AGG_TX_TRY_MSK 0x0000f000 /* bits 12:15 */
+
+#define AGG_TX_STATE_LAST_SENT_MSK (AGG_TX_STATE_LAST_SENT_TTL_MSK | \
+ AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK)
+
+/* # tx attempts for first frame in aggregation */
+#define AGG_TX_STATE_TRY_CNT_POS 12
+#define AGG_TX_STATE_TRY_CNT_MSK 0xf000
+
+/* Command ID and sequence number of Tx command for this frame */
+#define AGG_TX_STATE_SEQ_NUM_POS 16
+#define AGG_TX_STATE_SEQ_NUM_MSK 0xffff0000
+
+/*
+ * C_TX = 0x1c (response)
+ *
+ * This response may be in one of two slightly different formats, indicated
+ * by the frame_count field:
+ *
+ * 1) No aggregation (frame_count == 1). This reports Tx results for
+ * a single frame. Multiple attempts, at various bit rates, may have
+ * been made for this frame.
+ *
+ * 2) Aggregation (frame_count > 1). This reports Tx results for
+ * 2 or more frames that used block-acknowledge. All frames were
+ * transmitted at same rate. Rate scaling may have been used if first
+ * frame in this new agg block failed in previous agg block(s).
+ *
+ * Note that, for aggregation, ACK (block-ack) status is not delivered here;
+ * block-ack has not been received by the time the 4965 device records
+ * this status.
+ * This status relates to reasons the tx might have been blocked or aborted
+ * within the sending station (this 4965 device), rather than whether it was
+ * received successfully by the destination station.
+ */
+struct agg_tx_status {
+ __le16 status;
+ __le16 sequence;
+} __packed;
+
+struct il4965_tx_resp {
+ u8 frame_count; /* 1 no aggregation, >1 aggregation */
+ u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */
+ u8 failure_rts; /* # failures due to unsuccessful RTS */
+ u8 failure_frame; /* # failures due to no ACK (unused for agg) */
+
+ /* For non-agg: Rate at which frame was successful.
+ * For agg: Rate at which all frames were transmitted. */
+ __le32 rate_n_flags; /* RATE_MCS_* */
+
+ /* For non-agg: RTS + CTS + frame tx attempts time + ACK.
+ * For agg: RTS + CTS + aggregation tx time + block-ack time. */
+ __le16 wireless_media_time; /* uSecs */
+
+ __le16 reserved;
+ __le32 pa_power1; /* RF power amplifier measurement (not used) */
+ __le32 pa_power2;
+
+ /*
+ * For non-agg: frame status TX_STATUS_*
+ * For agg: status of 1st frame, AGG_TX_STATE_*; other frame status
+ * fields follow this one, up to frame_count.
+ * Bit fields:
+ * 11- 0: AGG_TX_STATE_* status code
+ * 15-12: Retry count for 1st frame in aggregation (retries
+ * occur if tx failed for this frame when it was a
+ * member of a previous aggregation block). If rate
+ * scaling is used, retry count indicates the rate
+ * table entry used for all frames in the new agg.
+ * 31-16: Sequence # for this frame's Tx cmd (not SSN!)
+ */
+ union {
+ __le32 status;
+ struct agg_tx_status agg_status[0]; /* for each agg frame */
+ } u;
+} __packed;
+
+/*
+ * N_COMPRESSED_BA = 0xc5 (response only, not a command)
+ *
+ * Reports Block-Acknowledge from recipient station
+ */
+struct il_compressed_ba_resp {
+ __le32 sta_addr_lo32;
+ __le16 sta_addr_hi16;
+ __le16 reserved;
+
+ /* Index of recipient (BA-sending) station in uCode's station table */
+ u8 sta_id;
+ u8 tid;
+ __le16 seq_ctl;
+ __le64 bitmap;
+ __le16 scd_flow;
+ __le16 scd_ssn;
+} __packed;
+
+/*
+ * C_TX_PWR_TBL = 0x97 (command, has simple generic response)
+ *
+ * See details under "TXPOWER" in 4965.h.
+ */
+
+struct il3945_txpowertable_cmd {
+ u8 band; /* 0: 5 GHz, 1: 2.4 GHz */
+ u8 reserved;
+ __le16 channel;
+ struct il3945_power_per_rate power[IL_MAX_RATES];
+} __packed;
+
+struct il4965_txpowertable_cmd {
+ u8 band; /* 0: 5 GHz, 1: 2.4 GHz */
+ u8 reserved;
+ __le16 channel;
+ struct il4965_tx_power_db tx_power;
+} __packed;
+
+
+/**
+ * struct il3945_rate_scaling_cmd - Rate Scaling Command & Response
+ *
+ * C_RATE_SCALE = 0x47 (command, has simple generic response)
+ *
+ * NOTE: The table of rates passed to the uCode via the
+ * RATE_SCALE command sets up the corresponding order of
+ * rates used for all related commands, including rate
+ * masks, etc.
+ *
+ * For example, if you set 9MB (PLCP 0x0f) as the first
+ * rate in the rate table, the bit mask for that rate
+ * when passed through ofdm_basic_rates on the C_RXON
+ * command would be bit 0 (1 << 0)
+ */
+struct il3945_rate_scaling_info {
+ __le16 rate_n_flags;
+ u8 try_cnt;
+ u8 next_rate_idx;
+} __packed;
+
+struct il3945_rate_scaling_cmd {
+ u8 table_id;
+ u8 reserved[3];
+ struct il3945_rate_scaling_info table[IL_MAX_RATES];
+} __packed;
+
+
+/*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */
+#define LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK (1 << 0)
+
+/* # of EDCA prioritized tx fifos */
+#define LINK_QUAL_AC_NUM AC_NUM
+
+/* # entries in rate scale table to support Tx retries */
+#define LINK_QUAL_MAX_RETRY_NUM 16
+
+/* Tx antenna selection values */
+#define LINK_QUAL_ANT_A_MSK (1 << 0)
+#define LINK_QUAL_ANT_B_MSK (1 << 1)
+#define LINK_QUAL_ANT_MSK (LINK_QUAL_ANT_A_MSK|LINK_QUAL_ANT_B_MSK)
+
+
+/**
+ * struct il_link_qual_general_params
+ *
+ * Used in C_TX_LINK_QUALITY_CMD
+ */
+struct il_link_qual_general_params {
+ u8 flags;
+
+ /* No entries at or above this (driver chosen) idx contain MIMO */
+ u8 mimo_delimiter;
+
+ /* Best single antenna to use for single stream (legacy, SISO). */
+ u8 single_stream_ant_msk; /* LINK_QUAL_ANT_* */
+
+ /* Best antennas to use for MIMO (unused for 4965, assumes both). */
+ u8 dual_stream_ant_msk; /* LINK_QUAL_ANT_* */
+
+ /*
+ * If driver needs to use different initial rates for different
+ * EDCA QOS access categories (as implemented by tx fifos 0-3),
+ * this table will set that up, by indicating the idxes in the
+ * rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table at which to start.
+ * Otherwise, driver should set all entries to 0.
+ *
+ * Entry usage:
+ * 0 = Background, 1 = Best Effort (normal), 2 = Video, 3 = Voice
+ * TX FIFOs above 3 use same value (typically 0) as TX FIFO 3.
+ */
+ u8 start_rate_idx[LINK_QUAL_AC_NUM];
+} __packed;
+
+#define LINK_QUAL_AGG_TIME_LIMIT_DEF (4000) /* 4 milliseconds */
+#define LINK_QUAL_AGG_TIME_LIMIT_MAX (8000)
+#define LINK_QUAL_AGG_TIME_LIMIT_MIN (100)
+
+#define LINK_QUAL_AGG_DISABLE_START_DEF (3)
+#define LINK_QUAL_AGG_DISABLE_START_MAX (255)
+#define LINK_QUAL_AGG_DISABLE_START_MIN (0)
+
+#define LINK_QUAL_AGG_FRAME_LIMIT_DEF (31)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63)
+#define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0)
+
+/**
+ * struct il_link_qual_agg_params
+ *
+ * Used in C_TX_LINK_QUALITY_CMD
+ */
+struct il_link_qual_agg_params {
+
+ /*
+ *Maximum number of uSec in aggregation.
+ * default set to 4000 (4 milliseconds) if not configured in .cfg
+ */
+ __le16 agg_time_limit;
+
+ /*
+ * Number of Tx retries allowed for a frame, before that frame will
+ * no longer be considered for the start of an aggregation sequence
+ * (scheduler will then try to tx it as single frame).
+ * Driver should set this to 3.
+ */
+ u8 agg_dis_start_th;
+
+ /*
+ * Maximum number of frames in aggregation.
+ * 0 = no limit (default). 1 = no aggregation.
+ * Other values = max # frames in aggregation.
+ */
+ u8 agg_frame_cnt_limit;
+
+ __le32 reserved;
+} __packed;
+
+/*
+ * C_TX_LINK_QUALITY_CMD = 0x4e (command, has simple generic response)
+ *
+ * For 4965 devices only; 3945 uses C_RATE_SCALE.
+ *
+ * Each station in the 4965 device's internal station table has its own table
+ * of 16
+ * Tx rates and modulation modes (e.g. legacy/SISO/MIMO) for retrying Tx when
+ * an ACK is not received. This command replaces the entire table for
+ * one station.
+ *
+ * NOTE: Station must already be in 4965 device's station table.
+ * Use C_ADD_STA.
+ *
+ * The rate scaling procedures described below work well. Of course, other
+ * procedures are possible, and may work better for particular environments.
+ *
+ *
+ * FILLING THE RATE TBL
+ *
+ * Given a particular initial rate and mode, as determined by the rate
+ * scaling algorithm described below, the Linux driver uses the following
+ * formula to fill the rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table in the
+ * Link Quality command:
+ *
+ *
+ * 1) If using High-throughput (HT) (SISO or MIMO) initial rate:
+ * a) Use this same initial rate for first 3 entries.
+ * b) Find next lower available rate using same mode (SISO or MIMO),
+ * use for next 3 entries. If no lower rate available, switch to
+ * legacy mode (no HT40 channel, no MIMO, no short guard interval).
+ * c) If using MIMO, set command's mimo_delimiter to number of entries
+ * using MIMO (3 or 6).
+ * d) After trying 2 HT rates, switch to legacy mode (no HT40 channel,
+ * no MIMO, no short guard interval), at the next lower bit rate
+ * (e.g. if second HT bit rate was 54, try 48 legacy), and follow
+ * legacy procedure for remaining table entries.
+ *
+ * 2) If using legacy initial rate:
+ * a) Use the initial rate for only one entry.
+ * b) For each following entry, reduce the rate to next lower available
+ * rate, until reaching the lowest available rate.
+ * c) When reducing rate, also switch antenna selection.
+ * d) Once lowest available rate is reached, repeat this rate until
+ * rate table is filled (16 entries), switching antenna each entry.
+ *
+ *
+ * ACCUMULATING HISTORY
+ *
+ * The rate scaling algorithm for 4965 devices, as implemented in Linux driver,
+ * uses two sets of frame Tx success history: One for the current/active
+ * modulation mode, and one for a speculative/search mode that is being
+ * attempted. If the speculative mode turns out to be more effective (i.e.
+ * actual transfer rate is better), then the driver continues to use the
+ * speculative mode as the new current active mode.
+ *
+ * Each history set contains, separately for each possible rate, data for a
+ * sliding win of the 62 most recent tx attempts at that rate. The data
+ * includes a shifting bitmap of success(1)/failure(0), and sums of successful
+ * and attempted frames, from which the driver can additionally calculate a
+ * success ratio (success / attempted) and number of failures
+ * (attempted - success), and control the size of the win (attempted).
+ * The driver uses the bit map to remove successes from the success sum, as
+ * the oldest tx attempts fall out of the win.
+ *
+ * When the 4965 device makes multiple tx attempts for a given frame, each
+ * attempt might be at a different rate, and have different modulation
+ * characteristics (e.g. antenna, fat channel, short guard interval), as set
+ * up in the rate scaling table in the Link Quality command. The driver must
+ * determine which rate table entry was used for each tx attempt, to determine
+ * which rate-specific history to update, and record only those attempts that
+ * match the modulation characteristics of the history set.
+ *
+ * When using block-ack (aggregation), all frames are transmitted at the same
+ * rate, since there is no per-attempt acknowledgment from the destination
+ * station. The Tx response struct il_tx_resp indicates the Tx rate in
+ * rate_n_flags field. After receiving a block-ack, the driver can update
+ * history for the entire block all at once.
+ *
+ *
+ * FINDING BEST STARTING RATE:
+ *
+ * When working with a selected initial modulation mode (see below), the
+ * driver attempts to find a best initial rate. The initial rate is the
+ * first entry in the Link Quality command's rate table.
+ *
+ * 1) Calculate actual throughput (success ratio * expected throughput, see
+ * table below) for current initial rate. Do this only if enough frames
+ * have been attempted to make the value meaningful: at least 6 failed
+ * tx attempts, or at least 8 successes. If not enough, don't try rate
+ * scaling yet.
+ *
+ * 2) Find available rates adjacent to current initial rate. Available means:
+ * a) supported by hardware &&
+ * b) supported by association &&
+ * c) within any constraints selected by user
+ *
+ * 3) Gather measured throughputs for adjacent rates. These might not have
+ * enough history to calculate a throughput. That's okay, we might try
+ * using one of them anyway!
+ *
+ * 4) Try decreasing rate if, for current rate:
+ * a) success ratio is < 15% ||
+ * b) lower adjacent rate has better measured throughput ||
+ * c) higher adjacent rate has worse throughput, and lower is unmeasured
+ *
+ * As a sanity check, if decrease was determined above, leave rate
+ * unchanged if:
+ * a) lower rate unavailable
+ * b) success ratio at current rate > 85% (very good)
+ * c) current measured throughput is better than expected throughput
+ * of lower rate (under perfect 100% tx conditions, see table below)
+ *
+ * 5) Try increasing rate if, for current rate:
+ * a) success ratio is < 15% ||
+ * b) both adjacent rates' throughputs are unmeasured (try it!) ||
+ * b) higher adjacent rate has better measured throughput ||
+ * c) lower adjacent rate has worse throughput, and higher is unmeasured
+ *
+ * As a sanity check, if increase was determined above, leave rate
+ * unchanged if:
+ * a) success ratio at current rate < 70%. This is not particularly
+ * good performance; higher rate is sure to have poorer success.
+ *
+ * 6) Re-evaluate the rate after each tx frame. If working with block-
+ * acknowledge, history and stats may be calculated for the entire
+ * block (including prior history that fits within the history wins),
+ * before re-evaluation.
+ *
+ * FINDING BEST STARTING MODULATION MODE:
+ *
+ * After working with a modulation mode for a "while" (and doing rate scaling),
+ * the driver searches for a new initial mode in an attempt to improve
+ * throughput. The "while" is measured by numbers of attempted frames:
+ *
+ * For legacy mode, search for new mode after:
+ * 480 successful frames, or 160 failed frames
+ * For high-throughput modes (SISO or MIMO), search for new mode after:
+ * 4500 successful frames, or 400 failed frames
+ *
+ * Mode switch possibilities are (3 for each mode):
+ *
+ * For legacy:
+ * Change antenna, try SISO (if HT association), try MIMO (if HT association)
+ * For SISO:
+ * Change antenna, try MIMO, try shortened guard interval (SGI)
+ * For MIMO:
+ * Try SISO antenna A, SISO antenna B, try shortened guard interval (SGI)
+ *
+ * When trying a new mode, use the same bit rate as the old/current mode when
+ * trying antenna switches and shortened guard interval. When switching to
+ * SISO from MIMO or legacy, or to MIMO from SISO or legacy, use a rate
+ * for which the expected throughput (under perfect conditions) is about the
+ * same or slightly better than the actual measured throughput delivered by
+ * the old/current mode.
+ *
+ * Actual throughput can be estimated by multiplying the expected throughput
+ * by the success ratio (successful / attempted tx frames). Frame size is
+ * not considered in this calculation; it assumes that frame size will average
+ * out to be fairly consistent over several samples. The following are
+ * metric values for expected throughput assuming 100% success ratio.
+ * Only G band has support for CCK rates:
+ *
+ * RATE: 1 2 5 11 6 9 12 18 24 36 48 54 60
+ *
+ * G: 7 13 35 58 40 57 72 98 121 154 177 186 186
+ * A: 0 0 0 0 40 57 72 98 121 154 177 186 186
+ * SISO 20MHz: 0 0 0 0 42 42 76 102 124 159 183 193 202
+ * SGI SISO 20MHz: 0 0 0 0 46 46 82 110 132 168 192 202 211
+ * MIMO 20MHz: 0 0 0 0 74 74 123 155 179 214 236 244 251
+ * SGI MIMO 20MHz: 0 0 0 0 81 81 131 164 188 222 243 251 257
+ * SISO 40MHz: 0 0 0 0 77 77 127 160 184 220 242 250 257
+ * SGI SISO 40MHz: 0 0 0 0 83 83 135 169 193 229 250 257 264
+ * MIMO 40MHz: 0 0 0 0 123 123 182 214 235 264 279 285 289
+ * SGI MIMO 40MHz: 0 0 0 0 131 131 191 222 242 270 284 289 293
+ *
+ * After the new mode has been tried for a short while (minimum of 6 failed
+ * frames or 8 successful frames), compare success ratio and actual throughput
+ * estimate of the new mode with the old. If either is better with the new
+ * mode, continue to use the new mode.
+ *
+ * Continue comparing modes until all 3 possibilities have been tried.
+ * If moving from legacy to HT, try all 3 possibilities from the new HT
+ * mode. After trying all 3, a best mode is found. Continue to use this mode
+ * for the longer "while" described above (e.g. 480 successful frames for
+ * legacy), and then repeat the search process.
+ *
+ */
+struct il_link_quality_cmd {
+
+ /* Index of destination/recipient station in uCode's station table */
+ u8 sta_id;
+ u8 reserved1;
+ __le16 control; /* not used */
+ struct il_link_qual_general_params general_params;
+ struct il_link_qual_agg_params agg_params;
+
+ /*
+ * Rate info; when using rate-scaling, Tx command's initial_rate_idx
+ * specifies 1st Tx rate attempted, via idx into this table.
+ * 4965 devices works its way through table when retrying Tx.
+ */
+ struct {
+ __le32 rate_n_flags; /* RATE_MCS_*, RATE_* */
+ } rs_table[LINK_QUAL_MAX_RETRY_NUM];
+ __le32 reserved2;
+} __packed;
+
+/*
+ * BT configuration enable flags:
+ * bit 0 - 1: BT channel announcement enabled
+ * 0: disable
+ * bit 1 - 1: priority of BT device enabled
+ * 0: disable
+ */
+#define BT_COEX_DISABLE (0x0)
+#define BT_ENABLE_CHANNEL_ANNOUNCE BIT(0)
+#define BT_ENABLE_PRIORITY BIT(1)
+
+#define BT_COEX_ENABLE (BT_ENABLE_CHANNEL_ANNOUNCE | BT_ENABLE_PRIORITY)
+
+#define BT_LEAD_TIME_DEF (0x1E)
+
+#define BT_MAX_KILL_DEF (0x5)
+
+/*
+ * C_BT_CONFIG = 0x9b (command, has simple generic response)
+ *
+ * 3945 and 4965 devices support hardware handshake with Bluetooth device on
+ * same platform. Bluetooth device alerts wireless device when it will Tx;
+ * wireless device can delay or kill its own Tx to accommodate.
+ */
+struct il_bt_cmd {
+ u8 flags;
+ u8 lead_time;
+ u8 max_kill;
+ u8 reserved;
+ __le32 kill_ack_mask;
+ __le32 kill_cts_mask;
+} __packed;
+
+
+/******************************************************************************
+ * (6)
+ * Spectrum Management (802.11h) Commands, Responses, Notifications:
+ *
+ *****************************************************************************/
+
+/*
+ * Spectrum Management
+ */
+#define MEASUREMENT_FILTER_FLAG (RXON_FILTER_PROMISC_MSK | \
+ RXON_FILTER_CTL2HOST_MSK | \
+ RXON_FILTER_ACCEPT_GRP_MSK | \
+ RXON_FILTER_DIS_DECRYPT_MSK | \
+ RXON_FILTER_DIS_GRP_DECRYPT_MSK | \
+ RXON_FILTER_ASSOC_MSK | \
+ RXON_FILTER_BCON_AWARE_MSK)
+
+struct il_measure_channel {
+ __le32 duration; /* measurement duration in extended beacon
+ * format */
+ u8 channel; /* channel to measure */
+ u8 type; /* see enum il_measure_type */
+ __le16 reserved;
+} __packed;
+
+/*
+ * C_SPECTRUM_MEASUREMENT = 0x74 (command)
+ */
+struct il_spectrum_cmd {
+ __le16 len; /* number of bytes starting from token */
+ u8 token; /* token id */
+ u8 id; /* measurement id -- 0 or 1 */
+ u8 origin; /* 0 = TGh, 1 = other, 2 = TGk */
+ u8 periodic; /* 1 = periodic */
+ __le16 path_loss_timeout;
+ __le32 start_time; /* start time in extended beacon format */
+ __le32 reserved2;
+ __le32 flags; /* rxon flags */
+ __le32 filter_flags; /* rxon filter flags */
+ __le16 channel_count; /* minimum 1, maximum 10 */
+ __le16 reserved3;
+ struct il_measure_channel channels[10];
+} __packed;
+
+/*
+ * C_SPECTRUM_MEASUREMENT = 0x74 (response)
+ */
+struct il_spectrum_resp {
+ u8 token;
+ u8 id; /* id of the prior command replaced, or 0xff */
+ __le16 status; /* 0 - command will be handled
+ * 1 - cannot handle (conflicts with another
+ * measurement) */
+} __packed;
+
+enum il_measurement_state {
+ IL_MEASUREMENT_START = 0,
+ IL_MEASUREMENT_STOP = 1,
+};
+
+enum il_measurement_status {
+ IL_MEASUREMENT_OK = 0,
+ IL_MEASUREMENT_CONCURRENT = 1,
+ IL_MEASUREMENT_CSA_CONFLICT = 2,
+ IL_MEASUREMENT_TGH_CONFLICT = 3,
+ /* 4-5 reserved */
+ IL_MEASUREMENT_STOPPED = 6,
+ IL_MEASUREMENT_TIMEOUT = 7,
+ IL_MEASUREMENT_PERIODIC_FAILED = 8,
+};
+
+#define NUM_ELEMENTS_IN_HISTOGRAM 8
+
+struct il_measurement_histogram {
+ __le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 0.8usec counts */
+ __le32 cck[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 1usec counts */
+} __packed;
+
+/* clear channel availability counters */
+struct il_measurement_cca_counters {
+ __le32 ofdm;
+ __le32 cck;
+} __packed;
+
+enum il_measure_type {
+ IL_MEASURE_BASIC = (1 << 0),
+ IL_MEASURE_CHANNEL_LOAD = (1 << 1),
+ IL_MEASURE_HISTOGRAM_RPI = (1 << 2),
+ IL_MEASURE_HISTOGRAM_NOISE = (1 << 3),
+ IL_MEASURE_FRAME = (1 << 4),
+ /* bits 5:6 are reserved */
+ IL_MEASURE_IDLE = (1 << 7),
+};
+
+/*
+ * N_SPECTRUM_MEASUREMENT = 0x75 (notification only, not a command)
+ */
+struct il_spectrum_notification {
+ u8 id; /* measurement id -- 0 or 1 */
+ u8 token;
+ u8 channel_idx; /* idx in measurement channel list */
+ u8 state; /* 0 - start, 1 - stop */
+ __le32 start_time; /* lower 32-bits of TSF */
+ u8 band; /* 0 - 5.2GHz, 1 - 2.4GHz */
+ u8 channel;
+ u8 type; /* see enum il_measurement_type */
+ u8 reserved1;
+ /* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only
+ * valid if applicable for measurement type requested. */
+ __le32 cca_ofdm; /* cca fraction time in 40Mhz clock periods */
+ __le32 cca_cck; /* cca fraction time in 44Mhz clock periods */
+ __le32 cca_time; /* channel load time in usecs */
+ u8 basic_type; /* 0 - bss, 1 - ofdm preamble, 2 -
+ * unidentified */
+ u8 reserved2[3];
+ struct il_measurement_histogram histogram;
+ __le32 stop_time; /* lower 32-bits of TSF */
+ __le32 status; /* see il_measurement_status */
+} __packed;
+
+/******************************************************************************
+ * (7)
+ * Power Management Commands, Responses, Notifications:
+ *
+ *****************************************************************************/
+
+/**
+ * struct il_powertable_cmd - Power Table Command
+ * @flags: See below:
+ *
+ * C_POWER_TBL = 0x77 (command, has simple generic response)
+ *
+ * PM allow:
+ * bit 0 - '0' Driver not allow power management
+ * '1' Driver allow PM (use rest of parameters)
+ *
+ * uCode send sleep notifications:
+ * bit 1 - '0' Don't send sleep notification
+ * '1' send sleep notification (SEND_PM_NOTIFICATION)
+ *
+ * Sleep over DTIM
+ * bit 2 - '0' PM have to walk up every DTIM
+ * '1' PM could sleep over DTIM till listen Interval.
+ *
+ * PCI power managed
+ * bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1)
+ * '1' !(PCI_CFG_LINK_CTRL & 0x1)
+ *
+ * Fast PD
+ * bit 4 - '1' Put radio to sleep when receiving frame for others
+ *
+ * Force sleep Modes
+ * bit 31/30- '00' use both mac/xtal sleeps
+ * '01' force Mac sleep
+ * '10' force xtal sleep
+ * '11' Illegal set
+ *
+ * NOTE: if sleep_interval[SLEEP_INTRVL_TBL_SIZE-1] > DTIM period then
+ * ucode assume sleep over DTIM is allowed and we don't need to wake up
+ * for every DTIM.
+ */
+#define IL_POWER_VEC_SIZE 5
+
+#define IL_POWER_DRIVER_ALLOW_SLEEP_MSK cpu_to_le16(BIT(0))
+#define IL_POWER_PCI_PM_MSK cpu_to_le16(BIT(3))
+
+struct il3945_powertable_cmd {
+ __le16 flags;
+ u8 reserved[2];
+ __le32 rx_data_timeout;
+ __le32 tx_data_timeout;
+ __le32 sleep_interval[IL_POWER_VEC_SIZE];
+} __packed;
+
+struct il_powertable_cmd {
+ __le16 flags;
+ u8 keep_alive_seconds; /* 3945 reserved */
+ u8 debug_flags; /* 3945 reserved */
+ __le32 rx_data_timeout;
+ __le32 tx_data_timeout;
+ __le32 sleep_interval[IL_POWER_VEC_SIZE];
+ __le32 keep_alive_beacons;
+} __packed;
+
+/*
+ * N_PM_SLEEP = 0x7A (notification only, not a command)
+ * all devices identical.
+ */
+struct il_sleep_notification {
+ u8 pm_sleep_mode;
+ u8 pm_wakeup_src;
+ __le16 reserved;
+ __le32 sleep_time;
+ __le32 tsf_low;
+ __le32 bcon_timer;
+} __packed;
+
+/* Sleep states. all devices identical. */
+enum {
+ IL_PM_NO_SLEEP = 0,
+ IL_PM_SLP_MAC = 1,
+ IL_PM_SLP_FULL_MAC_UNASSOCIATE = 2,
+ IL_PM_SLP_FULL_MAC_CARD_STATE = 3,
+ IL_PM_SLP_PHY = 4,
+ IL_PM_SLP_REPENT = 5,
+ IL_PM_WAKEUP_BY_TIMER = 6,
+ IL_PM_WAKEUP_BY_DRIVER = 7,
+ IL_PM_WAKEUP_BY_RFKILL = 8,
+ /* 3 reserved */
+ IL_PM_NUM_OF_MODES = 12,
+};
+
+/*
+ * N_CARD_STATE = 0xa1 (notification only, not a command)
+ */
+struct il_card_state_notif {
+ __le32 flags;
+} __packed;
+
+#define HW_CARD_DISABLED 0x01
+#define SW_CARD_DISABLED 0x02
+#define CT_CARD_DISABLED 0x04
+#define RXON_CARD_DISABLED 0x10
+
+struct il_ct_kill_config {
+ __le32 reserved;
+ __le32 critical_temperature_M;
+ __le32 critical_temperature_R;
+} __packed;
+
+/******************************************************************************
+ * (8)
+ * Scan Commands, Responses, Notifications:
+ *
+ *****************************************************************************/
+
+#define SCAN_CHANNEL_TYPE_PASSIVE cpu_to_le32(0)
+#define SCAN_CHANNEL_TYPE_ACTIVE cpu_to_le32(1)
+
+/**
+ * struct il_scan_channel - entry in C_SCAN channel table
+ *
+ * One for each channel in the scan list.
+ * Each channel can independently select:
+ * 1) SSID for directed active scans
+ * 2) Txpower setting (for rate specified within Tx command)
+ * 3) How long to stay on-channel (behavior may be modified by quiet_time,
+ * quiet_plcp_th, good_CRC_th)
+ *
+ * To avoid uCode errors, make sure the following are true (see comments
+ * under struct il_scan_cmd about max_out_time and quiet_time):
+ * 1) If using passive_dwell (i.e. passive_dwell != 0):
+ * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0)
+ * 2) quiet_time <= active_dwell
+ * 3) If restricting off-channel time (i.e. max_out_time !=0):
+ * passive_dwell < max_out_time
+ * active_dwell < max_out_time
+ */
+struct il3945_scan_channel {
+ /*
+ * type is defined as:
+ * 0:0 1 = active, 0 = passive
+ * 1:4 SSID direct bit map; if a bit is set, then corresponding
+ * SSID IE is transmitted in probe request.
+ * 5:7 reserved
+ */
+ u8 type;
+ u8 channel; /* band is selected by il3945_scan_cmd "flags" field */
+ struct il3945_tx_power tpc;
+ __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */
+ __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */
+} __packed;
+
+/* set number of direct probes u8 type */
+#define IL39_SCAN_PROBE_MASK(n) ((BIT(n) | (BIT(n) - BIT(1))))
+
+struct il_scan_channel {
+ /*
+ * type is defined as:
+ * 0:0 1 = active, 0 = passive
+ * 1:20 SSID direct bit map; if a bit is set, then corresponding
+ * SSID IE is transmitted in probe request.
+ * 21:31 reserved
+ */
+ __le32 type;
+ __le16 channel; /* band is selected by il_scan_cmd "flags" field */
+ u8 tx_gain; /* gain for analog radio */
+ u8 dsp_atten; /* gain for DSP */
+ __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */
+ __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */
+} __packed;
+
+/* set number of direct probes __le32 type */
+#define IL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1))))
+
+/**
+ * struct il_ssid_ie - directed scan network information element
+ *
+ * Up to 20 of these may appear in C_SCAN (Note: Only 4 are in
+ * 3945 SCAN api), selected by "type" bit field in struct il_scan_channel;
+ * each channel may select different ssids from among the 20 (4) entries.
+ * SSID IEs get transmitted in reverse order of entry.
+ */
+struct il_ssid_ie {
+ u8 id;
+ u8 len;
+ u8 ssid[32];
+} __packed;
+
+#define PROBE_OPTION_MAX_3945 4
+#define PROBE_OPTION_MAX 20
+#define TX_CMD_LIFE_TIME_INFINITE cpu_to_le32(0xFFFFFFFF)
+#define IL_GOOD_CRC_TH_DISABLED 0
+#define IL_GOOD_CRC_TH_DEFAULT cpu_to_le16(1)
+#define IL_GOOD_CRC_TH_NEVER cpu_to_le16(0xffff)
+#define IL_MAX_SCAN_SIZE 1024
+#define IL_MAX_CMD_SIZE 4096
+
+/*
+ * C_SCAN = 0x80 (command)
+ *
+ * The hardware scan command is very powerful; the driver can set it up to
+ * maintain (relatively) normal network traffic while doing a scan in the
+ * background. The max_out_time and suspend_time control the ratio of how
+ * long the device stays on an associated network channel ("service channel")
+ * vs. how long it's away from the service channel, i.e. tuned to other channels
+ * for scanning.
+ *
+ * max_out_time is the max time off-channel (in usec), and suspend_time
+ * is how long (in "extended beacon" format) that the scan is "suspended"
+ * after returning to the service channel. That is, suspend_time is the
+ * time that we stay on the service channel, doing normal work, between
+ * scan segments. The driver may set these parameters differently to support
+ * scanning when associated vs. not associated, and light vs. heavy traffic
+ * loads when associated.
+ *
+ * After receiving this command, the device's scan engine does the following;
+ *
+ * 1) Sends SCAN_START notification to driver
+ * 2) Checks to see if it has time to do scan for one channel
+ * 3) Sends NULL packet, with power-save (PS) bit set to 1,
+ * to tell AP that we're going off-channel
+ * 4) Tunes to first channel in scan list, does active or passive scan
+ * 5) Sends SCAN_RESULT notification to driver
+ * 6) Checks to see if it has time to do scan on *next* channel in list
+ * 7) Repeats 4-6 until it no longer has time to scan the next channel
+ * before max_out_time expires
+ * 8) Returns to service channel
+ * 9) Sends NULL packet with PS=0 to tell AP that we're back
+ * 10) Stays on service channel until suspend_time expires
+ * 11) Repeats entire process 2-10 until list is complete
+ * 12) Sends SCAN_COMPLETE notification
+ *
+ * For fast, efficient scans, the scan command also has support for staying on
+ * a channel for just a short time, if doing active scanning and getting no
+ * responses to the transmitted probe request. This time is controlled by
+ * quiet_time, and the number of received packets below which a channel is
+ * considered "quiet" is controlled by quiet_plcp_threshold.
+ *
+ * For active scanning on channels that have regulatory restrictions against
+ * blindly transmitting, the scan can listen before transmitting, to make sure
+ * that there is already legitimate activity on the channel. If enough
+ * packets are cleanly received on the channel (controlled by good_CRC_th,
+ * typical value 1), the scan engine starts transmitting probe requests.
+ *
+ * Driver must use separate scan commands for 2.4 vs. 5 GHz bands.
+ *
+ * To avoid uCode errors, see timing restrictions described under
+ * struct il_scan_channel.
+ */
+
+struct il3945_scan_cmd {
+ __le16 len;
+ u8 reserved0;
+ u8 channel_count; /* # channels in channel list */
+ __le16 quiet_time; /* dwell only this # millisecs on quiet channel
+ * (only for active scan) */
+ __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */
+ __le16 good_CRC_th; /* passive -> active promotion threshold */
+ __le16 reserved1;
+ __le32 max_out_time; /* max usec to be away from associated (service)
+ * channel */
+ __le32 suspend_time; /* pause scan this long (in "extended beacon
+ * format") when returning to service channel:
+ * 3945; 31:24 # beacons, 19:0 additional usec,
+ * 4965; 31:22 # beacons, 21:0 additional usec.
+ */
+ __le32 flags; /* RXON_FLG_* */
+ __le32 filter_flags; /* RXON_FILTER_* */
+
+ /* For active scans (set to all-0s for passive scans).
+ * Does not include payload. Must specify Tx rate; no rate scaling. */
+ struct il3945_tx_cmd tx_cmd;
+
+ /* For directed active scans (set to all-0s otherwise) */
+ struct il_ssid_ie direct_scan[PROBE_OPTION_MAX_3945];
+
+ /*
+ * Probe request frame, followed by channel list.
+ *
+ * Size of probe request frame is specified by byte count in tx_cmd.
+ * Channel list follows immediately after probe request frame.
+ * Number of channels in list is specified by channel_count.
+ * Each channel in list is of type:
+ *
+ * struct il3945_scan_channel channels[0];
+ *
+ * NOTE: Only one band of channels can be scanned per pass. You
+ * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
+ * for one scan to complete (i.e. receive N_SCAN_COMPLETE)
+ * before requesting another scan.
+ */
+ u8 data[0];
+} __packed;
+
+struct il_scan_cmd {
+ __le16 len;
+ u8 reserved0;
+ u8 channel_count; /* # channels in channel list */
+ __le16 quiet_time; /* dwell only this # millisecs on quiet channel
+ * (only for active scan) */
+ __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */
+ __le16 good_CRC_th; /* passive -> active promotion threshold */
+ __le16 rx_chain; /* RXON_RX_CHAIN_* */
+ __le32 max_out_time; /* max usec to be away from associated (service)
+ * channel */
+ __le32 suspend_time; /* pause scan this long (in "extended beacon
+ * format") when returning to service chnl:
+ * 3945; 31:24 # beacons, 19:0 additional usec,
+ * 4965; 31:22 # beacons, 21:0 additional usec.
+ */
+ __le32 flags; /* RXON_FLG_* */
+ __le32 filter_flags; /* RXON_FILTER_* */
+
+ /* For active scans (set to all-0s for passive scans).
+ * Does not include payload. Must specify Tx rate; no rate scaling. */
+ struct il_tx_cmd tx_cmd;
+
+ /* For directed active scans (set to all-0s otherwise) */
+ struct il_ssid_ie direct_scan[PROBE_OPTION_MAX];
+
+ /*
+ * Probe request frame, followed by channel list.
+ *
+ * Size of probe request frame is specified by byte count in tx_cmd.
+ * Channel list follows immediately after probe request frame.
+ * Number of channels in list is specified by channel_count.
+ * Each channel in list is of type:
+ *
+ * struct il_scan_channel channels[0];
+ *
+ * NOTE: Only one band of channels can be scanned per pass. You
+ * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
+ * for one scan to complete (i.e. receive N_SCAN_COMPLETE)
+ * before requesting another scan.
+ */
+ u8 data[0];
+} __packed;
+
+/* Can abort will notify by complete notification with abort status. */
+#define CAN_ABORT_STATUS cpu_to_le32(0x1)
+/* complete notification statuses */
+#define ABORT_STATUS 0x2
+
+/*
+ * C_SCAN = 0x80 (response)
+ */
+struct il_scanreq_notification {
+ __le32 status; /* 1: okay, 2: cannot fulfill request */
+} __packed;
+
+/*
+ * N_SCAN_START = 0x82 (notification only, not a command)
+ */
+struct il_scanstart_notification {
+ __le32 tsf_low;
+ __le32 tsf_high;
+ __le32 beacon_timer;
+ u8 channel;
+ u8 band;
+ u8 reserved[2];
+ __le32 status;
+} __packed;
+
+#define SCAN_OWNER_STATUS 0x1
+#define MEASURE_OWNER_STATUS 0x2
+
+#define IL_PROBE_STATUS_OK 0
+#define IL_PROBE_STATUS_TX_FAILED BIT(0)
+/* error statuses combined with TX_FAILED */
+#define IL_PROBE_STATUS_FAIL_TTL BIT(1)
+#define IL_PROBE_STATUS_FAIL_BT BIT(2)
+
+#define NUMBER_OF_STATS 1 /* first __le32 is good CRC */
+/*
+ * N_SCAN_RESULTS = 0x83 (notification only, not a command)
+ */
+struct il_scanresults_notification {
+ u8 channel;
+ u8 band;
+ u8 probe_status;
+ u8 num_probe_not_sent; /* not enough time to send */
+ __le32 tsf_low;
+ __le32 tsf_high;
+ __le32 stats[NUMBER_OF_STATS];
+} __packed;
+
+/*
+ * N_SCAN_COMPLETE = 0x84 (notification only, not a command)
+ */
+struct il_scancomplete_notification {
+ u8 scanned_channels;
+ u8 status;
+ u8 last_channel;
+ __le32 tsf_low;
+ __le32 tsf_high;
+} __packed;
+
+
+/******************************************************************************
+ * (9)
+ * IBSS/AP Commands and Notifications:
+ *
+ *****************************************************************************/
+
+enum il_ibss_manager {
+ IL_NOT_IBSS_MANAGER = 0,
+ IL_IBSS_MANAGER = 1,
+};
+
+/*
+ * N_BEACON = 0x90 (notification only, not a command)
+ */
+
+struct il3945_beacon_notif {
+ struct il3945_tx_resp beacon_notify_hdr;
+ __le32 low_tsf;
+ __le32 high_tsf;
+ __le32 ibss_mgr_status;
+} __packed;
+
+struct il4965_beacon_notif {
+ struct il4965_tx_resp beacon_notify_hdr;
+ __le32 low_tsf;
+ __le32 high_tsf;
+ __le32 ibss_mgr_status;
+} __packed;
+
+/*
+ * C_TX_BEACON= 0x91 (command, has simple generic response)
+ */
+
+struct il3945_tx_beacon_cmd {
+ struct il3945_tx_cmd tx;
+ __le16 tim_idx;
+ u8 tim_size;
+ u8 reserved1;
+ struct ieee80211_hdr frame[0]; /* beacon frame */
+} __packed;
+
+struct il_tx_beacon_cmd {
+ struct il_tx_cmd tx;
+ __le16 tim_idx;
+ u8 tim_size;
+ u8 reserved1;
+ struct ieee80211_hdr frame[0]; /* beacon frame */
+} __packed;
+
+/******************************************************************************
+ * (10)
+ * Statistics Commands and Notifications:
+ *
+ *****************************************************************************/
+
+#define IL_TEMP_CONVERT 260
+
+#define SUP_RATE_11A_MAX_NUM_CHANNELS 8
+#define SUP_RATE_11B_MAX_NUM_CHANNELS 4
+#define SUP_RATE_11G_MAX_NUM_CHANNELS 12
+
+/* Used for passing to driver number of successes and failures per rate */
+struct rate_histogram {
+ union {
+ __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS];
+ __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS];
+ __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS];
+ } success;
+ union {
+ __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS];
+ __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS];
+ __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS];
+ } failed;
+} __packed;
+
+/* stats command response */
+
+struct iwl39_stats_rx_phy {
+ __le32 ina_cnt;
+ __le32 fina_cnt;
+ __le32 plcp_err;
+ __le32 crc32_err;
+ __le32 overrun_err;
+ __le32 early_overrun_err;
+ __le32 crc32_good;
+ __le32 false_alarm_cnt;
+ __le32 fina_sync_err_cnt;
+ __le32 sfd_timeout;
+ __le32 fina_timeout;
+ __le32 unresponded_rts;
+ __le32 rxe_frame_limit_overrun;
+ __le32 sent_ack_cnt;
+ __le32 sent_cts_cnt;
+} __packed;
+
+struct iwl39_stats_rx_non_phy {
+ __le32 bogus_cts; /* CTS received when not expecting CTS */
+ __le32 bogus_ack; /* ACK received when not expecting ACK */
+ __le32 non_bssid_frames; /* number of frames with BSSID that
+ * doesn't belong to the STA BSSID */
+ __le32 filtered_frames; /* count frames that were dumped in the
+ * filtering process */
+ __le32 non_channel_beacons; /* beacons with our bss id but not on
+ * our serving channel */
+} __packed;
+
+struct iwl39_stats_rx {
+ struct iwl39_stats_rx_phy ofdm;
+ struct iwl39_stats_rx_phy cck;
+ struct iwl39_stats_rx_non_phy general;
+} __packed;
+
+struct iwl39_stats_tx {
+ __le32 preamble_cnt;
+ __le32 rx_detected_cnt;
+ __le32 bt_prio_defer_cnt;
+ __le32 bt_prio_kill_cnt;
+ __le32 few_bytes_cnt;
+ __le32 cts_timeout;
+ __le32 ack_timeout;
+ __le32 expected_ack_cnt;
+ __le32 actual_ack_cnt;
+} __packed;
+
+struct stats_dbg {
+ __le32 burst_check;
+ __le32 burst_count;
+ __le32 wait_for_silence_timeout_cnt;
+ __le32 reserved[3];
+} __packed;
+
+struct iwl39_stats_div {
+ __le32 tx_on_a;
+ __le32 tx_on_b;
+ __le32 exec_time;
+ __le32 probe_time;
+} __packed;
+
+struct iwl39_stats_general {
+ __le32 temperature;
+ struct stats_dbg dbg;
+ __le32 sleep_time;
+ __le32 slots_out;
+ __le32 slots_idle;
+ __le32 ttl_timestamp;
+ struct iwl39_stats_div div;
+} __packed;
+
+struct stats_rx_phy {
+ __le32 ina_cnt;
+ __le32 fina_cnt;
+ __le32 plcp_err;
+ __le32 crc32_err;
+ __le32 overrun_err;
+ __le32 early_overrun_err;
+ __le32 crc32_good;
+ __le32 false_alarm_cnt;
+ __le32 fina_sync_err_cnt;
+ __le32 sfd_timeout;
+ __le32 fina_timeout;
+ __le32 unresponded_rts;
+ __le32 rxe_frame_limit_overrun;
+ __le32 sent_ack_cnt;
+ __le32 sent_cts_cnt;
+ __le32 sent_ba_rsp_cnt;
+ __le32 dsp_self_kill;
+ __le32 mh_format_err;
+ __le32 re_acq_main_rssi_sum;
+ __le32 reserved3;
+} __packed;
+
+struct stats_rx_ht_phy {
+ __le32 plcp_err;
+ __le32 overrun_err;
+ __le32 early_overrun_err;
+ __le32 crc32_good;
+ __le32 crc32_err;
+ __le32 mh_format_err;
+ __le32 agg_crc32_good;
+ __le32 agg_mpdu_cnt;
+ __le32 agg_cnt;
+ __le32 unsupport_mcs;
+} __packed;
+
+#define INTERFERENCE_DATA_AVAILABLE cpu_to_le32(1)
+
+struct stats_rx_non_phy {
+ __le32 bogus_cts; /* CTS received when not expecting CTS */
+ __le32 bogus_ack; /* ACK received when not expecting ACK */
+ __le32 non_bssid_frames; /* number of frames with BSSID that
+ * doesn't belong to the STA BSSID */
+ __le32 filtered_frames; /* count frames that were dumped in the
+ * filtering process */
+ __le32 non_channel_beacons; /* beacons with our bss id but not on
+ * our serving channel */
+ __le32 channel_beacons; /* beacons with our bss id and in our
+ * serving channel */
+ __le32 num_missed_bcon; /* number of missed beacons */
+ __le32 adc_rx_saturation_time; /* count in 0.8us units the time the
+ * ADC was in saturation */
+ __le32 ina_detection_search_time;/* total time (in 0.8us) searched
+ * for INA */
+ __le32 beacon_silence_rssi_a; /* RSSI silence after beacon frame */
+ __le32 beacon_silence_rssi_b; /* RSSI silence after beacon frame */
+ __le32 beacon_silence_rssi_c; /* RSSI silence after beacon frame */
+ __le32 interference_data_flag; /* flag for interference data
+ * availability. 1 when data is
+ * available. */
+ __le32 channel_load; /* counts RX Enable time in uSec */
+ __le32 dsp_false_alarms; /* DSP false alarm (both OFDM
+ * and CCK) counter */
+ __le32 beacon_rssi_a;
+ __le32 beacon_rssi_b;
+ __le32 beacon_rssi_c;
+ __le32 beacon_energy_a;
+ __le32 beacon_energy_b;
+ __le32 beacon_energy_c;
+} __packed;
+
+struct stats_rx {
+ struct stats_rx_phy ofdm;
+ struct stats_rx_phy cck;
+ struct stats_rx_non_phy general;
+ struct stats_rx_ht_phy ofdm_ht;
+} __packed;
+
+/**
+ * struct stats_tx_power - current tx power
+ *
+ * @ant_a: current tx power on chain a in 1/2 dB step
+ * @ant_b: current tx power on chain b in 1/2 dB step
+ * @ant_c: current tx power on chain c in 1/2 dB step
+ */
+struct stats_tx_power {
+ u8 ant_a;
+ u8 ant_b;
+ u8 ant_c;
+ u8 reserved;
+} __packed;
+
+struct stats_tx_non_phy_agg {
+ __le32 ba_timeout;
+ __le32 ba_reschedule_frames;
+ __le32 scd_query_agg_frame_cnt;
+ __le32 scd_query_no_agg;
+ __le32 scd_query_agg;
+ __le32 scd_query_mismatch;
+ __le32 frame_not_ready;
+ __le32 underrun;
+ __le32 bt_prio_kill;
+ __le32 rx_ba_rsp_cnt;
+} __packed;
+
+struct stats_tx {
+ __le32 preamble_cnt;
+ __le32 rx_detected_cnt;
+ __le32 bt_prio_defer_cnt;
+ __le32 bt_prio_kill_cnt;
+ __le32 few_bytes_cnt;
+ __le32 cts_timeout;
+ __le32 ack_timeout;
+ __le32 expected_ack_cnt;
+ __le32 actual_ack_cnt;
+ __le32 dump_msdu_cnt;
+ __le32 burst_abort_next_frame_mismatch_cnt;
+ __le32 burst_abort_missing_next_frame_cnt;
+ __le32 cts_timeout_collision;
+ __le32 ack_or_ba_timeout_collision;
+ struct stats_tx_non_phy_agg agg;
+
+ __le32 reserved1;
+} __packed;
+
+
+struct stats_div {
+ __le32 tx_on_a;
+ __le32 tx_on_b;
+ __le32 exec_time;
+ __le32 probe_time;
+ __le32 reserved1;
+ __le32 reserved2;
+} __packed;
+
+struct stats_general_common {
+ __le32 temperature; /* radio temperature */
+ struct stats_dbg dbg;
+ __le32 sleep_time;
+ __le32 slots_out;
+ __le32 slots_idle;
+ __le32 ttl_timestamp;
+ struct stats_div div;
+ __le32 rx_enable_counter;
+ /*
+ * num_of_sos_states:
+ * count the number of times we have to re-tune
+ * in order to get out of bad PHY status
+ */
+ __le32 num_of_sos_states;
+} __packed;
+
+struct stats_general {
+ struct stats_general_common common;
+ __le32 reserved2;
+ __le32 reserved3;
+} __packed;
+
+#define UCODE_STATS_CLEAR_MSK (0x1 << 0)
+#define UCODE_STATS_FREQUENCY_MSK (0x1 << 1)
+#define UCODE_STATS_NARROW_BAND_MSK (0x1 << 2)
+
+/*
+ * C_STATS = 0x9c,
+ * all devices identical.
+ *
+ * This command triggers an immediate response containing uCode stats.
+ * The response is in the same format as N_STATS 0x9d, below.
+ *
+ * If the CLEAR_STATS configuration flag is set, uCode will clear its
+ * internal copy of the stats (counters) after issuing the response.
+ * This flag does not affect N_STATSs after beacons (see below).
+ *
+ * If the DISABLE_NOTIF configuration flag is set, uCode will not issue
+ * N_STATSs after received beacons (see below). This flag
+ * does not affect the response to the C_STATS 0x9c itself.
+ */
+#define IL_STATS_CONF_CLEAR_STATS cpu_to_le32(0x1) /* see above */
+#define IL_STATS_CONF_DISABLE_NOTIF cpu_to_le32(0x2)/* see above */
+struct il_stats_cmd {
+ __le32 configuration_flags; /* IL_STATS_CONF_* */
+} __packed;
+
+/*
+ * N_STATS = 0x9d (notification only, not a command)
+ *
+ * By default, uCode issues this notification after receiving a beacon
+ * while associated. To disable this behavior, set DISABLE_NOTIF flag in the
+ * C_STATS 0x9c, above.
+ *
+ * Statistics counters continue to increment beacon after beacon, but are
+ * cleared when changing channels or when driver issues C_STATS
+ * 0x9c with CLEAR_STATS bit set (see above).
+ *
+ * uCode also issues this notification during scans. uCode clears stats
+ * appropriately so that each notification contains stats for only the
+ * one channel that has just been scanned.
+ */
+#define STATS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2)
+#define STATS_REPLY_FLG_HT40_MODE_MSK cpu_to_le32(0x8)
+
+struct il3945_notif_stats {
+ __le32 flag;
+ struct iwl39_stats_rx rx;
+ struct iwl39_stats_tx tx;
+ struct iwl39_stats_general general;
+} __packed;
+
+struct il_notif_stats {
+ __le32 flag;
+ struct stats_rx rx;
+ struct stats_tx tx;
+ struct stats_general general;
+} __packed;
+
+/*
+ * N_MISSED_BEACONS = 0xa2 (notification only, not a command)
+ *
+ * uCode send N_MISSED_BEACONS to driver when detect beacon missed
+ * in regardless of how many missed beacons, which mean when driver receive the
+ * notification, inside the command, it can find all the beacons information
+ * which include number of total missed beacons, number of consecutive missed
+ * beacons, number of beacons received and number of beacons expected to
+ * receive.
+ *
+ * If uCode detected consecutive_missed_beacons > 5, it will reset the radio
+ * in order to bring the radio/PHY back to working state; which has no relation
+ * to when driver will perform sensitivity calibration.
+ *
+ * Driver should set it own missed_beacon_threshold to decide when to perform
+ * sensitivity calibration based on number of consecutive missed beacons in
+ * order to improve overall performance, especially in noisy environment.
+ *
+ */
+
+#define IL_MISSED_BEACON_THRESHOLD_MIN (1)
+#define IL_MISSED_BEACON_THRESHOLD_DEF (5)
+#define IL_MISSED_BEACON_THRESHOLD_MAX IL_MISSED_BEACON_THRESHOLD_DEF
+
+struct il_missed_beacon_notif {
+ __le32 consecutive_missed_beacons;
+ __le32 total_missed_becons;
+ __le32 num_expected_beacons;
+ __le32 num_recvd_beacons;
+} __packed;
+
+
+/******************************************************************************
+ * (11)
+ * Rx Calibration Commands:
+ *
+ * With the uCode used for open source drivers, most Tx calibration (except
+ * for Tx Power) and most Rx calibration is done by uCode during the
+ * "initialize" phase of uCode boot. Driver must calibrate only:
+ *
+ * 1) Tx power (depends on temperature), described elsewhere
+ * 2) Receiver gain balance (optimize MIMO, and detect disconnected antennas)
+ * 3) Receiver sensitivity (to optimize signal detection)
+ *
+ *****************************************************************************/
+
+/**
+ * C_SENSITIVITY = 0xa8 (command, has simple generic response)
+ *
+ * This command sets up the Rx signal detector for a sensitivity level that
+ * is high enough to lock onto all signals within the associated network,
+ * but low enough to ignore signals that are below a certain threshold, so as
+ * not to have too many "false alarms". False alarms are signals that the
+ * Rx DSP tries to lock onto, but then discards after determining that they
+ * are noise.
+ *
+ * The optimum number of false alarms is between 5 and 50 per 200 TUs
+ * (200 * 1024 uSecs, i.e. 204.8 milliseconds) of actual Rx time (i.e.
+ * time listening, not transmitting). Driver must adjust sensitivity so that
+ * the ratio of actual false alarms to actual Rx time falls within this range.
+ *
+ * While associated, uCode delivers N_STATSs after each
+ * received beacon. These provide information to the driver to analyze the
+ * sensitivity. Don't analyze stats that come in from scanning, or any
+ * other non-associated-network source. Pertinent stats include:
+ *
+ * From "general" stats (struct stats_rx_non_phy):
+ *
+ * (beacon_energy_[abc] & 0x0FF00) >> 8 (unsigned, higher value is lower level)
+ * Measure of energy of desired signal. Used for establishing a level
+ * below which the device does not detect signals.
+ *
+ * (beacon_silence_rssi_[abc] & 0x0FF00) >> 8 (unsigned, units in dB)
+ * Measure of background noise in silent period after beacon.
+ *
+ * channel_load
+ * uSecs of actual Rx time during beacon period (varies according to
+ * how much time was spent transmitting).
+ *
+ * From "cck" and "ofdm" stats (struct stats_rx_phy), separately:
+ *
+ * false_alarm_cnt
+ * Signal locks abandoned early (before phy-level header).
+ *
+ * plcp_err
+ * Signal locks abandoned late (during phy-level header).
+ *
+ * NOTE: Both false_alarm_cnt and plcp_err increment monotonically from
+ * beacon to beacon, i.e. each value is an accumulation of all errors
+ * before and including the latest beacon. Values will wrap around to 0
+ * after counting up to 2^32 - 1. Driver must differentiate vs.
+ * previous beacon's values to determine # false alarms in the current
+ * beacon period.
+ *
+ * Total number of false alarms = false_alarms + plcp_errs
+ *
+ * For OFDM, adjust the following table entries in struct il_sensitivity_cmd
+ * (notice that the start points for OFDM are at or close to settings for
+ * maximum sensitivity):
+ *
+ * START / MIN / MAX
+ * HD_AUTO_CORR32_X1_TH_ADD_MIN_IDX 90 / 85 / 120
+ * HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_IDX 170 / 170 / 210
+ * HD_AUTO_CORR32_X4_TH_ADD_MIN_IDX 105 / 105 / 140
+ * HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_IDX 220 / 220 / 270
+ *
+ * If actual rate of OFDM false alarms (+ plcp_errors) is too high
+ * (greater than 50 for each 204.8 msecs listening), reduce sensitivity
+ * by *adding* 1 to all 4 of the table entries above, up to the max for
+ * each entry. Conversely, if false alarm rate is too low (less than 5
+ * for each 204.8 msecs listening), *subtract* 1 from each entry to
+ * increase sensitivity.
+ *
+ * For CCK sensitivity, keep track of the following:
+ *
+ * 1). 20-beacon history of maximum background noise, indicated by
+ * (beacon_silence_rssi_[abc] & 0x0FF00), units in dB, across the
+ * 3 receivers. For any given beacon, the "silence reference" is
+ * the maximum of last 60 samples (20 beacons * 3 receivers).
+ *
+ * 2). 10-beacon history of strongest signal level, as indicated
+ * by (beacon_energy_[abc] & 0x0FF00) >> 8, across the 3 receivers,
+ * i.e. the strength of the signal through the best receiver at the
+ * moment. These measurements are "upside down", with lower values
+ * for stronger signals, so max energy will be *minimum* value.
+ *
+ * Then for any given beacon, the driver must determine the *weakest*
+ * of the strongest signals; this is the minimum level that needs to be
+ * successfully detected, when using the best receiver at the moment.
+ * "Max cck energy" is the maximum (higher value means lower energy!)
+ * of the last 10 minima. Once this is determined, driver must add
+ * a little margin by adding "6" to it.
+ *
+ * 3). Number of consecutive beacon periods with too few false alarms.
+ * Reset this to 0 at the first beacon period that falls within the
+ * "good" range (5 to 50 false alarms per 204.8 milliseconds rx).
+ *
+ * Then, adjust the following CCK table entries in struct il_sensitivity_cmd
+ * (notice that the start points for CCK are at maximum sensitivity):
+ *
+ * START / MIN / MAX
+ * HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX 125 / 125 / 200
+ * HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX 200 / 200 / 400
+ * HD_MIN_ENERGY_CCK_DET_IDX 100 / 0 / 100
+ *
+ * If actual rate of CCK false alarms (+ plcp_errors) is too high
+ * (greater than 50 for each 204.8 msecs listening), method for reducing
+ * sensitivity is:
+ *
+ * 1) *Add* 3 to value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX,
+ * up to max 400.
+ *
+ * 2) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX is < 160,
+ * sensitivity has been reduced a significant amount; bring it up to
+ * a moderate 161. Otherwise, *add* 3, up to max 200.
+ *
+ * 3) a) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX is > 160,
+ * sensitivity has been reduced only a moderate or small amount;
+ * *subtract* 2 from value in HD_MIN_ENERGY_CCK_DET_IDX,
+ * down to min 0. Otherwise (if gain has been significantly reduced),
+ * don't change the HD_MIN_ENERGY_CCK_DET_IDX value.
+ *
+ * b) Save a snapshot of the "silence reference".
+ *
+ * If actual rate of CCK false alarms (+ plcp_errors) is too low
+ * (less than 5 for each 204.8 msecs listening), method for increasing
+ * sensitivity is used only if:
+ *
+ * 1a) Previous beacon did not have too many false alarms
+ * 1b) AND difference between previous "silence reference" and current
+ * "silence reference" (prev - current) is 2 or more,
+ * OR 2) 100 or more consecutive beacon periods have had rate of
+ * less than 5 false alarms per 204.8 milliseconds rx time.
+ *
+ * Method for increasing sensitivity:
+ *
+ * 1) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX,
+ * down to min 125.
+ *
+ * 2) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX,
+ * down to min 200.
+ *
+ * 3) *Add* 2 to value in HD_MIN_ENERGY_CCK_DET_IDX, up to max 100.
+ *
+ * If actual rate of CCK false alarms (+ plcp_errors) is within good range
+ * (between 5 and 50 for each 204.8 msecs listening):
+ *
+ * 1) Save a snapshot of the silence reference.
+ *
+ * 2) If previous beacon had too many CCK false alarms (+ plcp_errors),
+ * give some extra margin to energy threshold by *subtracting* 8
+ * from value in HD_MIN_ENERGY_CCK_DET_IDX.
+ *
+ * For all cases (too few, too many, good range), make sure that the CCK
+ * detection threshold (energy) is below the energy level for robust
+ * detection over the past 10 beacon periods, the "Max cck energy".
+ * Lower values mean higher energy; this means making sure that the value
+ * in HD_MIN_ENERGY_CCK_DET_IDX is at or *above* "Max cck energy".
+ *
+ */
+
+/*
+ * Table entries in C_SENSITIVITY (struct il_sensitivity_cmd)
+ */
+#define HD_TBL_SIZE (11) /* number of entries */
+#define HD_MIN_ENERGY_CCK_DET_IDX (0) /* table idxes */
+#define HD_MIN_ENERGY_OFDM_DET_IDX (1)
+#define HD_AUTO_CORR32_X1_TH_ADD_MIN_IDX (2)
+#define HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_IDX (3)
+#define HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX (4)
+#define HD_AUTO_CORR32_X4_TH_ADD_MIN_IDX (5)
+#define HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_IDX (6)
+#define HD_BARKER_CORR_TH_ADD_MIN_IDX (7)
+#define HD_BARKER_CORR_TH_ADD_MIN_MRC_IDX (8)
+#define HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX (9)
+#define HD_OFDM_ENERGY_TH_IN_IDX (10)
+
+/* Control field in struct il_sensitivity_cmd */
+#define C_SENSITIVITY_CONTROL_DEFAULT_TBL cpu_to_le16(0)
+#define C_SENSITIVITY_CONTROL_WORK_TBL cpu_to_le16(1)
+
+/**
+ * struct il_sensitivity_cmd
+ * @control: (1) updates working table, (0) updates default table
+ * @table: energy threshold values, use HD_* as idx into table
+ *
+ * Always use "1" in "control" to update uCode's working table and DSP.
+ */
+struct il_sensitivity_cmd {
+ __le16 control; /* always use "1" */
+ __le16 table[HD_TBL_SIZE]; /* use HD_* as idx */
+} __packed;
+
+
+/**
+ * C_PHY_CALIBRATION = 0xb0 (command, has simple generic response)
+ *
+ * This command sets the relative gains of 4965 device's 3 radio receiver chains.
+ *
+ * After the first association, driver should accumulate signal and noise
+ * stats from the N_STATSs that follow the first 20
+ * beacons from the associated network (don't collect stats that come
+ * in from scanning, or any other non-network source).
+ *
+ * DISCONNECTED ANTENNA:
+ *
+ * Driver should determine which antennas are actually connected, by comparing
+ * average beacon signal levels for the 3 Rx chains. Accumulate (add) the
+ * following values over 20 beacons, one accumulator for each of the chains
+ * a/b/c, from struct stats_rx_non_phy:
+ *
+ * beacon_rssi_[abc] & 0x0FF (unsigned, units in dB)
+ *
+ * Find the strongest signal from among a/b/c. Compare the other two to the
+ * strongest. If any signal is more than 15 dB (times 20, unless you
+ * divide the accumulated values by 20) below the strongest, the driver
+ * considers that antenna to be disconnected, and should not try to use that
+ * antenna/chain for Rx or Tx. If both A and B seem to be disconnected,
+ * driver should declare the stronger one as connected, and attempt to use it
+ * (A and B are the only 2 Tx chains!).
+ *
+ *
+ * RX BALANCE:
+ *
+ * Driver should balance the 3 receivers (but just the ones that are connected
+ * to antennas, see above) for gain, by comparing the average signal levels
+ * detected during the silence after each beacon (background noise).
+ * Accumulate (add) the following values over 20 beacons, one accumulator for
+ * each of the chains a/b/c, from struct stats_rx_non_phy:
+ *
+ * beacon_silence_rssi_[abc] & 0x0FF (unsigned, units in dB)
+ *
+ * Find the weakest background noise level from among a/b/c. This Rx chain
+ * will be the reference, with 0 gain adjustment. Attenuate other channels by
+ * finding noise difference:
+ *
+ * (accum_noise[i] - accum_noise[reference]) / 30
+ *
+ * The "30" adjusts the dB in the 20 accumulated samples to units of 1.5 dB.
+ * For use in diff_gain_[abc] fields of struct il_calibration_cmd, the
+ * driver should limit the difference results to a range of 0-3 (0-4.5 dB),
+ * and set bit 2 to indicate "reduce gain". The value for the reference
+ * (weakest) chain should be "0".
+ *
+ * diff_gain_[abc] bit fields:
+ * 2: (1) reduce gain, (0) increase gain
+ * 1-0: amount of gain, units of 1.5 dB
+ */
+
+/* Phy calibration command for series */
+/* The default calibrate table size if not specified by firmware */
+#define IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18
+enum {
+ IL_PHY_CALIBRATE_DIFF_GAIN_CMD = 7,
+ IL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE = 19,
+};
+
+#define IL_MAX_PHY_CALIBRATE_TBL_SIZE (253)
+
+struct il_calib_hdr {
+ u8 op_code;
+ u8 first_group;
+ u8 groups_num;
+ u8 data_valid;
+} __packed;
+
+/* IL_PHY_CALIBRATE_DIFF_GAIN_CMD (7) */
+struct il_calib_diff_gain_cmd {
+ struct il_calib_hdr hdr;
+ s8 diff_gain_a; /* see above */
+ s8 diff_gain_b;
+ s8 diff_gain_c;
+ u8 reserved1;
+} __packed;
+
+/******************************************************************************
+ * (12)
+ * Miscellaneous Commands:
+ *
+ *****************************************************************************/
+
+/*
+ * LEDs Command & Response
+ * C_LEDS = 0x48 (command, has simple generic response)
+ *
+ * For each of 3 possible LEDs (Activity/Link/Tech, selected by "id" field),
+ * this command turns it on or off, or sets up a periodic blinking cycle.
+ */
+struct il_led_cmd {
+ __le32 interval; /* "interval" in uSec */
+ u8 id; /* 1: Activity, 2: Link, 3: Tech */
+ u8 off; /* # intervals off while blinking;
+ * "0", with >0 "on" value, turns LED on */
+ u8 on; /* # intervals on while blinking;
+ * "0", regardless of "off", turns LED off */
+ u8 reserved;
+} __packed;
+
+
+/******************************************************************************
+ * (13)
+ * Union of all expected notifications/responses:
+ *
+ *****************************************************************************/
+
+struct il_rx_pkt {
+ /*
+ * The first 4 bytes of the RX frame header contain both the RX frame
+ * size and some flags.
+ * Bit fields:
+ * 31: flag flush RB request
+ * 30: flag ignore TC (terminal counter) request
+ * 29: flag fast IRQ request
+ * 28-14: Reserved
+ * 13-00: RX frame size
+ */
+ __le32 len_n_flags;
+ struct il_cmd_header hdr;
+ union {
+ struct il3945_rx_frame rx_frame;
+ struct il3945_tx_resp tx_resp;
+ struct il3945_beacon_notif beacon_status;
+
+ struct il_alive_resp alive_frame;
+ struct il_spectrum_notification spectrum_notif;
+ struct il_csa_notification csa_notif;
+ struct il_error_resp err_resp;
+ struct il_card_state_notif card_state_notif;
+ struct il_add_sta_resp add_sta;
+ struct il_rem_sta_resp rem_sta;
+ struct il_sleep_notification sleep_notif;
+ struct il_spectrum_resp spectrum;
+ struct il_notif_stats stats;
+ struct il_compressed_ba_resp compressed_ba;
+ struct il_missed_beacon_notif missed_beacon;
+ __le32 status;
+ u8 raw[0];
+ } u;
+} __packed;
+
+#endif /* __il_commands_h__ */
diff --git a/drivers/net/wireless/iwlegacy/iwl-commands.h b/drivers/net/wireless/iwlegacy/iwl-commands.h
deleted file mode 100644
index 8df4d25..0000000
--- a/drivers/net/wireless/iwlegacy/iwl-commands.h
+++ /dev/null
@@ -1,3398 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@xxxxxxxxxxxxxxx>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *****************************************************************************/
-/*
- * Please use this file (iwl-commands.h) only for uCode API definitions.
- * Please use iwl-xxxx-hw.h for hardware-related definitions.
- * Please use iwl-dev.h for driver implementation definitions.
- */
-
-#ifndef __il_commands_h__
-#define __il_commands_h__
-
-struct il_priv;
-
-/* uCode version contains 4 values: Major/Minor/API/Serial */
-#define IL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
-#define IL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
-#define IL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
-#define IL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
-
-
-/* Tx rates */
-#define IL_CCK_RATES 4
-#define IL_OFDM_RATES 8
-#define IL_MAX_RATES (IL_CCK_RATES + IL_OFDM_RATES)
-
-enum {
- N_ALIVE = 0x1,
- N_ERROR = 0x2,
-
- /* RXON and QOS commands */
- C_RXON = 0x10,
- C_RXON_ASSOC = 0x11,
- C_QOS_PARAM = 0x13,
- C_RXON_TIMING = 0x14,
-
- /* Multi-Station support */
- C_ADD_STA = 0x18,
- C_REM_STA = 0x19,
-
- /* Security */
- C_WEPKEY = 0x20,
-
- /* RX, TX, LEDs */
- N_3945_RX = 0x1b, /* 3945 only */
- C_TX = 0x1c,
- C_RATE_SCALE = 0x47, /* 3945 only */
- C_LEDS = 0x48,
- C_TX_LINK_QUALITY_CMD = 0x4e, /* for 4965 */
-
- /* 802.11h related */
- C_CHANNEL_SWITCH = 0x72,
- N_CHANNEL_SWITCH = 0x73,
- C_SPECTRUM_MEASUREMENT = 0x74,
- N_SPECTRUM_MEASUREMENT = 0x75,
-
- /* Power Management */
- C_POWER_TBL = 0x77,
- N_PM_SLEEP = 0x7A,
- N_PM_DEBUG_STATS = 0x7B,
-
- /* Scan commands and notifications */
- C_SCAN = 0x80,
- C_SCAN_ABORT = 0x81,
- N_SCAN_START = 0x82,
- N_SCAN_RESULTS = 0x83,
- N_SCAN_COMPLETE = 0x84,
-
- /* IBSS/AP commands */
- N_BEACON = 0x90,
- C_TX_BEACON= 0x91,
-
- /* Miscellaneous commands */
- C_TX_PWR_TBL = 0x97,
-
- /* Bluetooth device coexistence config command */
- C_BT_CONFIG = 0x9b,
-
- /* Statistics */
- C_STATS = 0x9c,
- N_STATS = 0x9d,
-
- /* RF-KILL commands and notifications */
- N_CARD_STATE = 0xa1,
-
- /* Missed beacons notification */
- N_MISSED_BEACONS = 0xa2,
-
- C_CT_KILL_CONFIG = 0xa4,
- C_SENSITIVITY = 0xa8,
- C_PHY_CALIBRATION = 0xb0,
- N_RX_PHY = 0xc0,
- N_RX_MPDU = 0xc1,
- N_RX = 0xc3,
- N_COMPRESSED_BA = 0xc5,
-
- IL_CN_MAX = 0xff
-};
-
-/******************************************************************************
- * (0)
- * Commonly used structures and definitions:
- * Command header, rate_n_flags, txpower
- *
- *****************************************************************************/
-
-/* il_cmd_header flags value */
-#define IL_CMD_FAILED_MSK 0x40
-
-#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f)
-#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8)
-#define SEQ_TO_IDX(s) ((s) & 0xff)
-#define IDX_TO_SEQ(i) ((i) & 0xff)
-#define SEQ_HUGE_FRAME cpu_to_le16(0x4000)
-#define SEQ_RX_FRAME cpu_to_le16(0x8000)
-
-/**
- * struct il_cmd_header
- *
- * This header format appears in the beginning of each command sent from the
- * driver, and each response/notification received from uCode.
- */
-struct il_cmd_header {
- u8 cmd; /* Command ID: C_RXON, etc. */
- u8 flags; /* 0:5 reserved, 6 abort, 7 internal */
- /*
- * The driver sets up the sequence number to values of its choosing.
- * uCode does not use this value, but passes it back to the driver
- * when sending the response to each driver-originated command, so
- * the driver can match the response to the command. Since the values
- * don't get used by uCode, the driver may set up an arbitrary format.
- *
- * There is one exception: uCode sets bit 15 when it originates
- * the response/notification, i.e. when the response/notification
- * is not a direct response to a command sent by the driver. For
- * example, uCode issues N_3945_RX when it sends a received frame
- * to the driver; it is not a direct response to any driver command.
- *
- * The Linux driver uses the following format:
- *
- * 0:7 tfd idx - position within TX queue
- * 8:12 TX queue id
- * 13 reserved
- * 14 huge - driver sets this to indicate command is in the
- * 'huge' storage at the end of the command buffers
- * 15 unsolicited RX or uCode-originated notification
- */
- __le16 sequence;
-
- /* command or response/notification data follows immediately */
- u8 data[0];
-} __packed;
-
-
-/**
- * struct il3945_tx_power
- *
- * Used in C_TX_PWR_TBL, C_SCAN, C_CHANNEL_SWITCH
- *
- * Each entry contains two values:
- * 1) DSP gain (or sometimes called DSP attenuation). This is a fine-grained
- * linear value that multiplies the output of the digital signal processor,
- * before being sent to the analog radio.
- * 2) Radio gain. This sets the analog gain of the radio Tx path.
- * It is a coarser setting, and behaves in a logarithmic (dB) fashion.
- *
- * Driver obtains values from struct il3945_tx_power power_gain_table[][].
- */
-struct il3945_tx_power {
- u8 tx_gain; /* gain for analog radio */
- u8 dsp_atten; /* gain for DSP */
-} __packed;
-
-/**
- * struct il3945_power_per_rate
- *
- * Used in C_TX_PWR_TBL, C_CHANNEL_SWITCH
- */
-struct il3945_power_per_rate {
- u8 rate; /* plcp */
- struct il3945_tx_power tpc;
- u8 reserved;
-} __packed;
-
-/**
- * iwl4965 rate_n_flags bit fields
- *
- * rate_n_flags format is used in following iwl4965 commands:
- * N_RX (response only)
- * N_RX_MPDU (response only)
- * C_TX (both command and response)
- * C_TX_LINK_QUALITY_CMD
- *
- * High-throughput (HT) rate format for bits 7:0 (bit 8 must be "1"):
- * 2-0: 0) 6 Mbps
- * 1) 12 Mbps
- * 2) 18 Mbps
- * 3) 24 Mbps
- * 4) 36 Mbps
- * 5) 48 Mbps
- * 6) 54 Mbps
- * 7) 60 Mbps
- *
- * 4-3: 0) Single stream (SISO)
- * 1) Dual stream (MIMO)
- * 2) Triple stream (MIMO)
- *
- * 5: Value of 0x20 in bits 7:0 indicates 6 Mbps HT40 duplicate data
- *
- * Legacy OFDM rate format for bits 7:0 (bit 8 must be "0", bit 9 "0"):
- * 3-0: 0xD) 6 Mbps
- * 0xF) 9 Mbps
- * 0x5) 12 Mbps
- * 0x7) 18 Mbps
- * 0x9) 24 Mbps
- * 0xB) 36 Mbps
- * 0x1) 48 Mbps
- * 0x3) 54 Mbps
- *
- * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"):
- * 6-0: 10) 1 Mbps
- * 20) 2 Mbps
- * 55) 5.5 Mbps
- * 110) 11 Mbps
- */
-#define RATE_MCS_CODE_MSK 0x7
-#define RATE_MCS_SPATIAL_POS 3
-#define RATE_MCS_SPATIAL_MSK 0x18
-#define RATE_MCS_HT_DUP_POS 5
-#define RATE_MCS_HT_DUP_MSK 0x20
-
-/* Bit 8: (1) HT format, (0) legacy format in bits 7:0 */
-#define RATE_MCS_FLAGS_POS 8
-#define RATE_MCS_HT_POS 8
-#define RATE_MCS_HT_MSK 0x100
-
-/* Bit 9: (1) CCK, (0) OFDM. HT (bit 8) must be "0" for this bit to be valid */
-#define RATE_MCS_CCK_POS 9
-#define RATE_MCS_CCK_MSK 0x200
-
-/* Bit 10: (1) Use Green Field preamble */
-#define RATE_MCS_GF_POS 10
-#define RATE_MCS_GF_MSK 0x400
-
-/* Bit 11: (1) Use 40Mhz HT40 chnl width, (0) use 20 MHz legacy chnl width */
-#define RATE_MCS_HT40_POS 11
-#define RATE_MCS_HT40_MSK 0x800
-
-/* Bit 12: (1) Duplicate data on both 20MHz chnls. HT40 (bit 11) must be set. */
-#define RATE_MCS_DUP_POS 12
-#define RATE_MCS_DUP_MSK 0x1000
-
-/* Bit 13: (1) Short guard interval (0.4 usec), (0) normal GI (0.8 usec) */
-#define RATE_MCS_SGI_POS 13
-#define RATE_MCS_SGI_MSK 0x2000
-
-/**
- * rate_n_flags Tx antenna masks
- * 4965 has 2 transmitters
- * bit14:16
- */
-#define RATE_MCS_ANT_POS 14
-#define RATE_MCS_ANT_A_MSK 0x04000
-#define RATE_MCS_ANT_B_MSK 0x08000
-#define RATE_MCS_ANT_C_MSK 0x10000
-#define RATE_MCS_ANT_AB_MSK (RATE_MCS_ANT_A_MSK | RATE_MCS_ANT_B_MSK)
-#define RATE_MCS_ANT_ABC_MSK (RATE_MCS_ANT_AB_MSK | RATE_MCS_ANT_C_MSK)
-#define RATE_ANT_NUM 3
-
-#define POWER_TBL_NUM_ENTRIES 33
-#define POWER_TBL_NUM_HT_OFDM_ENTRIES 32
-#define POWER_TBL_CCK_ENTRY 32
-
-#define IL_PWR_NUM_HT_OFDM_ENTRIES 24
-#define IL_PWR_CCK_ENTRIES 2
-
-/**
- * union il4965_tx_power_dual_stream
- *
- * Host format used for C_TX_PWR_TBL, C_CHANNEL_SWITCH
- * Use __le32 version (struct tx_power_dual_stream) when building command.
- *
- * Driver provides radio gain and DSP attenuation settings to device in pairs,
- * one value for each transmitter chain. The first value is for transmitter A,
- * second for transmitter B.
- *
- * For SISO bit rates, both values in a pair should be identical.
- * For MIMO rates, one value may be different from the other,
- * in order to balance the Tx output between the two transmitters.
- *
- * See more details in doc for TXPOWER in 4965.h.
- */
-union il4965_tx_power_dual_stream {
- struct {
- u8 radio_tx_gain[2];
- u8 dsp_predis_atten[2];
- } s;
- u32 dw;
-};
-
-/**
- * struct tx_power_dual_stream
- *
- * Table entries in C_TX_PWR_TBL, C_CHANNEL_SWITCH
- *
- * Same format as il_tx_power_dual_stream, but __le32
- */
-struct tx_power_dual_stream {
- __le32 dw;
-} __packed;
-
-/**
- * struct il4965_tx_power_db
- *
- * Entire table within C_TX_PWR_TBL, C_CHANNEL_SWITCH
- */
-struct il4965_tx_power_db {
- struct tx_power_dual_stream power_tbl[POWER_TBL_NUM_ENTRIES];
-} __packed;
-
-/******************************************************************************
- * (0a)
- * Alive and Error Commands & Responses:
- *
- *****************************************************************************/
-
-#define UCODE_VALID_OK cpu_to_le32(0x1)
-#define INITIALIZE_SUBTYPE (9)
-
-/*
- * ("Initialize") N_ALIVE = 0x1 (response only, not a command)
- *
- * uCode issues this "initialize alive" notification once the initialization
- * uCode image has completed its work, and is ready to load the runtime image.
- * This is the *first* "alive" notification that the driver will receive after
- * rebooting uCode; the "initialize" alive is indicated by subtype field == 9.
- *
- * See comments documenting "BSM" (bootstrap state machine).
- *
- * For 4965, this notification contains important calibration data for
- * calculating txpower settings:
- *
- * 1) Power supply voltage indication. The voltage sensor outputs higher
- * values for lower voltage, and vice verse.
- *
- * 2) Temperature measurement parameters, for each of two channel widths
- * (20 MHz and 40 MHz) supported by the radios. Temperature sensing
- * is done via one of the receiver chains, and channel width influences
- * the results.
- *
- * 3) Tx gain compensation to balance 4965's 2 Tx chains for MIMO operation,
- * for each of 5 frequency ranges.
- */
-struct il_init_alive_resp {
- u8 ucode_minor;
- u8 ucode_major;
- __le16 reserved1;
- u8 sw_rev[8];
- u8 ver_type;
- u8 ver_subtype; /* "9" for initialize alive */
- __le16 reserved2;
- __le32 log_event_table_ptr;
- __le32 error_event_table_ptr;
- __le32 timestamp;
- __le32 is_valid;
-
- /* calibration values from "initialize" uCode */
- __le32 voltage; /* signed, higher value is lower voltage */
- __le32 therm_r1[2]; /* signed, 1st for normal, 2nd for HT40 */
- __le32 therm_r2[2]; /* signed */
- __le32 therm_r3[2]; /* signed */
- __le32 therm_r4[2]; /* signed */
- __le32 tx_atten[5][2]; /* signed MIMO gain comp, 5 freq groups,
- * 2 Tx chains */
-} __packed;
-
-
-/**
- * N_ALIVE = 0x1 (response only, not a command)
- *
- * uCode issues this "alive" notification once the runtime image is ready
- * to receive commands from the driver. This is the *second* "alive"
- * notification that the driver will receive after rebooting uCode;
- * this "alive" is indicated by subtype field != 9.
- *
- * See comments documenting "BSM" (bootstrap state machine).
- *
- * This response includes two pointers to structures within the device's
- * data SRAM (access via HBUS_TARG_MEM_* regs) that are useful for debugging:
- *
- * 1) log_event_table_ptr indicates base of the event log. This traces
- * a 256-entry history of uCode execution within a circular buffer.
- * Its header format is:
- *
- * __le32 log_size; log capacity (in number of entries)
- * __le32 type; (1) timestamp with each entry, (0) no timestamp
- * __le32 wraps; # times uCode has wrapped to top of circular buffer
- * __le32 write_idx; next circular buffer entry that uCode would fill
- *
- * The header is followed by the circular buffer of log entries. Entries
- * with timestamps have the following format:
- *
- * __le32 event_id; range 0 - 1500
- * __le32 timestamp; low 32 bits of TSF (of network, if associated)
- * __le32 data; event_id-specific data value
- *
- * Entries without timestamps contain only event_id and data.
- *
- *
- * 2) error_event_table_ptr indicates base of the error log. This contains
- * information about any uCode error that occurs. For 4965, the format
- * of the error log is:
- *
- * __le32 valid; (nonzero) valid, (0) log is empty
- * __le32 error_id; type of error
- * __le32 pc; program counter
- * __le32 blink1; branch link
- * __le32 blink2; branch link
- * __le32 ilink1; interrupt link
- * __le32 ilink2; interrupt link
- * __le32 data1; error-specific data
- * __le32 data2; error-specific data
- * __le32 line; source code line of error
- * __le32 bcon_time; beacon timer
- * __le32 tsf_low; network timestamp function timer
- * __le32 tsf_hi; network timestamp function timer
- * __le32 gp1; GP1 timer register
- * __le32 gp2; GP2 timer register
- * __le32 gp3; GP3 timer register
- * __le32 ucode_ver; uCode version
- * __le32 hw_ver; HW Silicon version
- * __le32 brd_ver; HW board version
- * __le32 log_pc; log program counter
- * __le32 frame_ptr; frame pointer
- * __le32 stack_ptr; stack pointer
- * __le32 hcmd; last host command
- * __le32 isr0; isr status register LMPM_NIC_ISR0: rxtx_flag
- * __le32 isr1; isr status register LMPM_NIC_ISR1: host_flag
- * __le32 isr2; isr status register LMPM_NIC_ISR2: enc_flag
- * __le32 isr3; isr status register LMPM_NIC_ISR3: time_flag
- * __le32 isr4; isr status register LMPM_NIC_ISR4: wico interrupt
- * __le32 isr_pref; isr status register LMPM_NIC_PREF_STAT
- * __le32 wait_event; wait event() caller address
- * __le32 l2p_control; L2pControlField
- * __le32 l2p_duration; L2pDurationField
- * __le32 l2p_mhvalid; L2pMhValidBits
- * __le32 l2p_addr_match; L2pAddrMatchStat
- * __le32 lmpm_pmg_sel; indicate which clocks are turned on (LMPM_PMG_SEL)
- * __le32 u_timestamp; indicate when the date and time of the compilation
- * __le32 reserved;
- *
- * The Linux driver can print both logs to the system log when a uCode error
- * occurs.
- */
-struct il_alive_resp {
- u8 ucode_minor;
- u8 ucode_major;
- __le16 reserved1;
- u8 sw_rev[8];
- u8 ver_type;
- u8 ver_subtype; /* not "9" for runtime alive */
- __le16 reserved2;
- __le32 log_event_table_ptr; /* SRAM address for event log */
- __le32 error_event_table_ptr; /* SRAM address for error log */
- __le32 timestamp;
- __le32 is_valid;
-} __packed;
-
-/*
- * N_ERROR = 0x2 (response only, not a command)
- */
-struct il_error_resp {
- __le32 error_type;
- u8 cmd_id;
- u8 reserved1;
- __le16 bad_cmd_seq_num;
- __le32 error_info;
- __le64 timestamp;
-} __packed;
-
-/******************************************************************************
- * (1)
- * RXON Commands & Responses:
- *
- *****************************************************************************/
-
-/*
- * Rx config defines & structure
- */
-/* rx_config device types */
-enum {
- RXON_DEV_TYPE_AP = 1,
- RXON_DEV_TYPE_ESS = 3,
- RXON_DEV_TYPE_IBSS = 4,
- RXON_DEV_TYPE_SNIFFER = 6,
-};
-
-
-#define RXON_RX_CHAIN_DRIVER_FORCE_MSK cpu_to_le16(0x1 << 0)
-#define RXON_RX_CHAIN_DRIVER_FORCE_POS (0)
-#define RXON_RX_CHAIN_VALID_MSK cpu_to_le16(0x7 << 1)
-#define RXON_RX_CHAIN_VALID_POS (1)
-#define RXON_RX_CHAIN_FORCE_SEL_MSK cpu_to_le16(0x7 << 4)
-#define RXON_RX_CHAIN_FORCE_SEL_POS (4)
-#define RXON_RX_CHAIN_FORCE_MIMO_SEL_MSK cpu_to_le16(0x7 << 7)
-#define RXON_RX_CHAIN_FORCE_MIMO_SEL_POS (7)
-#define RXON_RX_CHAIN_CNT_MSK cpu_to_le16(0x3 << 10)
-#define RXON_RX_CHAIN_CNT_POS (10)
-#define RXON_RX_CHAIN_MIMO_CNT_MSK cpu_to_le16(0x3 << 12)
-#define RXON_RX_CHAIN_MIMO_CNT_POS (12)
-#define RXON_RX_CHAIN_MIMO_FORCE_MSK cpu_to_le16(0x1 << 14)
-#define RXON_RX_CHAIN_MIMO_FORCE_POS (14)
-
-/* rx_config flags */
-/* band & modulation selection */
-#define RXON_FLG_BAND_24G_MSK cpu_to_le32(1 << 0)
-#define RXON_FLG_CCK_MSK cpu_to_le32(1 << 1)
-/* auto detection enable */
-#define RXON_FLG_AUTO_DETECT_MSK cpu_to_le32(1 << 2)
-/* TGg protection when tx */
-#define RXON_FLG_TGG_PROTECT_MSK cpu_to_le32(1 << 3)
-/* cck short slot & preamble */
-#define RXON_FLG_SHORT_SLOT_MSK cpu_to_le32(1 << 4)
-#define RXON_FLG_SHORT_PREAMBLE_MSK cpu_to_le32(1 << 5)
-/* antenna selection */
-#define RXON_FLG_DIS_DIV_MSK cpu_to_le32(1 << 7)
-#define RXON_FLG_ANT_SEL_MSK cpu_to_le32(0x0f00)
-#define RXON_FLG_ANT_A_MSK cpu_to_le32(1 << 8)
-#define RXON_FLG_ANT_B_MSK cpu_to_le32(1 << 9)
-/* radar detection enable */
-#define RXON_FLG_RADAR_DETECT_MSK cpu_to_le32(1 << 12)
-#define RXON_FLG_TGJ_NARROW_BAND_MSK cpu_to_le32(1 << 13)
-/* rx response to host with 8-byte TSF
-* (according to ON_AIR deassertion) */
-#define RXON_FLG_TSF2HOST_MSK cpu_to_le32(1 << 15)
-
-
-/* HT flags */
-#define RXON_FLG_CTRL_CHANNEL_LOC_POS (22)
-#define RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK cpu_to_le32(0x1 << 22)
-
-#define RXON_FLG_HT_OPERATING_MODE_POS (23)
-
-#define RXON_FLG_HT_PROT_MSK cpu_to_le32(0x1 << 23)
-#define RXON_FLG_HT40_PROT_MSK cpu_to_le32(0x2 << 23)
-
-#define RXON_FLG_CHANNEL_MODE_POS (25)
-#define RXON_FLG_CHANNEL_MODE_MSK cpu_to_le32(0x3 << 25)
-
-/* channel mode */
-enum {
- CHANNEL_MODE_LEGACY = 0,
- CHANNEL_MODE_PURE_40 = 1,
- CHANNEL_MODE_MIXED = 2,
- CHANNEL_MODE_RESERVED = 3,
-};
-#define RXON_FLG_CHANNEL_MODE_LEGACY \
- cpu_to_le32(CHANNEL_MODE_LEGACY << RXON_FLG_CHANNEL_MODE_POS)
-#define RXON_FLG_CHANNEL_MODE_PURE_40 \
- cpu_to_le32(CHANNEL_MODE_PURE_40 << RXON_FLG_CHANNEL_MODE_POS)
-#define RXON_FLG_CHANNEL_MODE_MIXED \
- cpu_to_le32(CHANNEL_MODE_MIXED << RXON_FLG_CHANNEL_MODE_POS)
-
-/* CTS to self (if spec allows) flag */
-#define RXON_FLG_SELF_CTS_EN cpu_to_le32(0x1<<30)
-
-/* rx_config filter flags */
-/* accept all data frames */
-#define RXON_FILTER_PROMISC_MSK cpu_to_le32(1 << 0)
-/* pass control & management to host */
-#define RXON_FILTER_CTL2HOST_MSK cpu_to_le32(1 << 1)
-/* accept multi-cast */
-#define RXON_FILTER_ACCEPT_GRP_MSK cpu_to_le32(1 << 2)
-/* don't decrypt uni-cast frames */
-#define RXON_FILTER_DIS_DECRYPT_MSK cpu_to_le32(1 << 3)
-/* don't decrypt multi-cast frames */
-#define RXON_FILTER_DIS_GRP_DECRYPT_MSK cpu_to_le32(1 << 4)
-/* STA is associated */
-#define RXON_FILTER_ASSOC_MSK cpu_to_le32(1 << 5)
-/* transfer to host non bssid beacons in associated state */
-#define RXON_FILTER_BCON_AWARE_MSK cpu_to_le32(1 << 6)
-
-/**
- * C_RXON = 0x10 (command, has simple generic response)
- *
- * RXON tunes the radio tuner to a service channel, and sets up a number
- * of parameters that are used primarily for Rx, but also for Tx operations.
- *
- * NOTE: When tuning to a new channel, driver must set the
- * RXON_FILTER_ASSOC_MSK to 0. This will clear station-dependent
- * info within the device, including the station tables, tx retry
- * rate tables, and txpower tables. Driver must build a new station
- * table and txpower table before transmitting anything on the RXON
- * channel.
- *
- * NOTE: All RXONs wipe clean the internal txpower table. Driver must
- * issue a new C_TX_PWR_TBL after each C_RXON (0x10),
- * regardless of whether RXON_FILTER_ASSOC_MSK is set.
- */
-
-struct il3945_rxon_cmd {
- u8 node_addr[6];
- __le16 reserved1;
- u8 bssid_addr[6];
- __le16 reserved2;
- u8 wlap_bssid_addr[6];
- __le16 reserved3;
- u8 dev_type;
- u8 air_propagation;
- __le16 reserved4;
- u8 ofdm_basic_rates;
- u8 cck_basic_rates;
- __le16 assoc_id;
- __le32 flags;
- __le32 filter_flags;
- __le16 channel;
- __le16 reserved5;
-} __packed;
-
-struct il4965_rxon_cmd {
- u8 node_addr[6];
- __le16 reserved1;
- u8 bssid_addr[6];
- __le16 reserved2;
- u8 wlap_bssid_addr[6];
- __le16 reserved3;
- u8 dev_type;
- u8 air_propagation;
- __le16 rx_chain;
- u8 ofdm_basic_rates;
- u8 cck_basic_rates;
- __le16 assoc_id;
- __le32 flags;
- __le32 filter_flags;
- __le16 channel;
- u8 ofdm_ht_single_stream_basic_rates;
- u8 ofdm_ht_dual_stream_basic_rates;
-} __packed;
-
-/* Create a common rxon cmd which will be typecast into the 3945 or 4965
- * specific rxon cmd, depending on where it is called from.
- */
-struct il_rxon_cmd {
- u8 node_addr[6];
- __le16 reserved1;
- u8 bssid_addr[6];
- __le16 reserved2;
- u8 wlap_bssid_addr[6];
- __le16 reserved3;
- u8 dev_type;
- u8 air_propagation;
- __le16 rx_chain;
- u8 ofdm_basic_rates;
- u8 cck_basic_rates;
- __le16 assoc_id;
- __le32 flags;
- __le32 filter_flags;
- __le16 channel;
- u8 ofdm_ht_single_stream_basic_rates;
- u8 ofdm_ht_dual_stream_basic_rates;
- u8 reserved4;
- u8 reserved5;
-} __packed;
-
-
-/*
- * C_RXON_ASSOC = 0x11 (command, has simple generic response)
- */
-struct il3945_rxon_assoc_cmd {
- __le32 flags;
- __le32 filter_flags;
- u8 ofdm_basic_rates;
- u8 cck_basic_rates;
- __le16 reserved;
-} __packed;
-
-struct il4965_rxon_assoc_cmd {
- __le32 flags;
- __le32 filter_flags;
- u8 ofdm_basic_rates;
- u8 cck_basic_rates;
- u8 ofdm_ht_single_stream_basic_rates;
- u8 ofdm_ht_dual_stream_basic_rates;
- __le16 rx_chain_select_flags;
- __le16 reserved;
-} __packed;
-
-#define IL_CONN_MAX_LISTEN_INTERVAL 10
-#define IL_MAX_UCODE_BEACON_INTERVAL 4 /* 4096 */
-#define IL39_MAX_UCODE_BEACON_INTERVAL 1 /* 1024 */
-
-/*
- * C_RXON_TIMING = 0x14 (command, has simple generic response)
- */
-struct il_rxon_time_cmd {
- __le64 timestamp;
- __le16 beacon_interval;
- __le16 atim_win;
- __le32 beacon_init_val;
- __le16 listen_interval;
- u8 dtim_period;
- u8 delta_cp_bss_tbtts;
-} __packed;
-
-/*
- * C_CHANNEL_SWITCH = 0x72 (command, has simple generic response)
- */
-struct il3945_channel_switch_cmd {
- u8 band;
- u8 expect_beacon;
- __le16 channel;
- __le32 rxon_flags;
- __le32 rxon_filter_flags;
- __le32 switch_time;
- struct il3945_power_per_rate power[IL_MAX_RATES];
-} __packed;
-
-struct il4965_channel_switch_cmd {
- u8 band;
- u8 expect_beacon;
- __le16 channel;
- __le32 rxon_flags;
- __le32 rxon_filter_flags;
- __le32 switch_time;
- struct il4965_tx_power_db tx_power;
-} __packed;
-
-/*
- * N_CHANNEL_SWITCH = 0x73 (notification only, not a command)
- */
-struct il_csa_notification {
- __le16 band;
- __le16 channel;
- __le32 status; /* 0 - OK, 1 - fail */
-} __packed;
-
-/******************************************************************************
- * (2)
- * Quality-of-Service (QOS) Commands & Responses:
- *
- *****************************************************************************/
-
-/**
- * struct il_ac_qos -- QOS timing params for C_QOS_PARAM
- * One for each of 4 EDCA access categories in struct il_qosparam_cmd
- *
- * @cw_min: Contention win, start value in numbers of slots.
- * Should be a power-of-2, minus 1. Device's default is 0x0f.
- * @cw_max: Contention win, max value in numbers of slots.
- * Should be a power-of-2, minus 1. Device's default is 0x3f.
- * @aifsn: Number of slots in Arbitration Interframe Space (before
- * performing random backoff timing prior to Tx). Device default 1.
- * @edca_txop: Length of Tx opportunity, in uSecs. Device default is 0.
- *
- * Device will automatically increase contention win by (2*CW) + 1 for each
- * transmission retry. Device uses cw_max as a bit mask, ANDed with new CW
- * value, to cap the CW value.
- */
-struct il_ac_qos {
- __le16 cw_min;
- __le16 cw_max;
- u8 aifsn;
- u8 reserved1;
- __le16 edca_txop;
-} __packed;
-
-/* QoS flags defines */
-#define QOS_PARAM_FLG_UPDATE_EDCA_MSK cpu_to_le32(0x01)
-#define QOS_PARAM_FLG_TGN_MSK cpu_to_le32(0x02)
-#define QOS_PARAM_FLG_TXOP_TYPE_MSK cpu_to_le32(0x10)
-
-/* Number of Access Categories (AC) (EDCA), queues 0..3 */
-#define AC_NUM 4
-
-/*
- * C_QOS_PARAM = 0x13 (command, has simple generic response)
- *
- * This command sets up timings for each of the 4 prioritized EDCA Tx FIFOs
- * 0: Background, 1: Best Effort, 2: Video, 3: Voice.
- */
-struct il_qosparam_cmd {
- __le32 qos_flags;
- struct il_ac_qos ac[AC_NUM];
-} __packed;
-
-/******************************************************************************
- * (3)
- * Add/Modify Stations Commands & Responses:
- *
- *****************************************************************************/
-/*
- * Multi station support
- */
-
-/* Special, dedicated locations within device's station table */
-#define IL_AP_ID 0
-#define IL_STA_ID 2
-#define IL3945_BROADCAST_ID 24
-#define IL3945_STATION_COUNT 25
-#define IL4965_BROADCAST_ID 31
-#define IL4965_STATION_COUNT 32
-
-#define IL_STATION_COUNT 32 /* MAX(3945,4965)*/
-#define IL_INVALID_STATION 255
-
-#define STA_FLG_TX_RATE_MSK cpu_to_le32(1 << 2)
-#define STA_FLG_PWR_SAVE_MSK cpu_to_le32(1 << 8)
-#define STA_FLG_RTS_MIMO_PROT_MSK cpu_to_le32(1 << 17)
-#define STA_FLG_AGG_MPDU_8US_MSK cpu_to_le32(1 << 18)
-#define STA_FLG_MAX_AGG_SIZE_POS (19)
-#define STA_FLG_MAX_AGG_SIZE_MSK cpu_to_le32(3 << 19)
-#define STA_FLG_HT40_EN_MSK cpu_to_le32(1 << 21)
-#define STA_FLG_MIMO_DIS_MSK cpu_to_le32(1 << 22)
-#define STA_FLG_AGG_MPDU_DENSITY_POS (23)
-#define STA_FLG_AGG_MPDU_DENSITY_MSK cpu_to_le32(7 << 23)
-
-/* Use in mode field. 1: modify existing entry, 0: add new station entry */
-#define STA_CONTROL_MODIFY_MSK 0x01
-
-/* key flags __le16*/
-#define STA_KEY_FLG_ENCRYPT_MSK cpu_to_le16(0x0007)
-#define STA_KEY_FLG_NO_ENC cpu_to_le16(0x0000)
-#define STA_KEY_FLG_WEP cpu_to_le16(0x0001)
-#define STA_KEY_FLG_CCMP cpu_to_le16(0x0002)
-#define STA_KEY_FLG_TKIP cpu_to_le16(0x0003)
-
-#define STA_KEY_FLG_KEYID_POS 8
-#define STA_KEY_FLG_INVALID cpu_to_le16(0x0800)
-/* wep key is either from global key (0) or from station info array (1) */
-#define STA_KEY_FLG_MAP_KEY_MSK cpu_to_le16(0x0008)
-
-/* wep key in STA: 5-bytes (0) or 13-bytes (1) */
-#define STA_KEY_FLG_KEY_SIZE_MSK cpu_to_le16(0x1000)
-#define STA_KEY_MULTICAST_MSK cpu_to_le16(0x4000)
-#define STA_KEY_MAX_NUM 8
-
-/* Flags indicate whether to modify vs. don't change various station params */
-#define STA_MODIFY_KEY_MASK 0x01
-#define STA_MODIFY_TID_DISABLE_TX 0x02
-#define STA_MODIFY_TX_RATE_MSK 0x04
-#define STA_MODIFY_ADDBA_TID_MSK 0x08
-#define STA_MODIFY_DELBA_TID_MSK 0x10
-#define STA_MODIFY_SLEEP_TX_COUNT_MSK 0x20
-
-/* Receiver address (actually, Rx station's idx into station table),
- * combined with Traffic ID (QOS priority), in format used by Tx Scheduler */
-#define BUILD_RAxTID(sta_id, tid) (((sta_id) << 4) + (tid))
-
-struct il4965_keyinfo {
- __le16 key_flags;
- u8 tkip_rx_tsc_byte2; /* TSC[2] for key mix ph1 detection */
- u8 reserved1;
- __le16 tkip_rx_ttak[5]; /* 10-byte unicast TKIP TTAK */
- u8 key_offset;
- u8 reserved2;
- u8 key[16]; /* 16-byte unicast decryption key */
-} __packed;
-
-/**
- * struct sta_id_modify
- * @addr[ETH_ALEN]: station's MAC address
- * @sta_id: idx of station in uCode's station table
- * @modify_mask: STA_MODIFY_*, 1: modify, 0: don't change
- *
- * Driver selects unused table idx when adding new station,
- * or the idx to a pre-existing station entry when modifying that station.
- * Some idxes have special purposes (IL_AP_ID, idx 0, is for AP).
- *
- * modify_mask flags select which parameters to modify vs. leave alone.
- */
-struct sta_id_modify {
- u8 addr[ETH_ALEN];
- __le16 reserved1;
- u8 sta_id;
- u8 modify_mask;
- __le16 reserved2;
-} __packed;
-
-/*
- * C_ADD_STA = 0x18 (command)
- *
- * The device contains an internal table of per-station information,
- * with info on security keys, aggregation parameters, and Tx rates for
- * initial Tx attempt and any retries (4965 devices uses
- * C_TX_LINK_QUALITY_CMD,
- * 3945 uses C_RATE_SCALE to set up rate tables).
- *
- * C_ADD_STA sets up the table entry for one station, either creating
- * a new entry, or modifying a pre-existing one.
- *
- * NOTE: RXON command (without "associated" bit set) wipes the station table
- * clean. Moving into RF_KILL state does this also. Driver must set up
- * new station table before transmitting anything on the RXON channel
- * (except active scans or active measurements; those commands carry
- * their own txpower/rate setup data).
- *
- * When getting started on a new channel, driver must set up the
- * IL_BROADCAST_ID entry (last entry in the table). For a client
- * station in a BSS, once an AP is selected, driver sets up the AP STA
- * in the IL_AP_ID entry (1st entry in the table). BROADCAST and AP
- * are all that are needed for a BSS client station. If the device is
- * used as AP, or in an IBSS network, driver must set up station table
- * entries for all STAs in network, starting with idx IL_STA_ID.
- */
-
-struct il3945_addsta_cmd {
- u8 mode; /* 1: modify existing, 0: add new station */
- u8 reserved[3];
- struct sta_id_modify sta;
- struct il4965_keyinfo key;
- __le32 station_flags; /* STA_FLG_* */
- __le32 station_flags_msk; /* STA_FLG_* */
-
- /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID)
- * corresponding to bit (e.g. bit 5 controls TID 5).
- * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
- __le16 tid_disable_tx;
-
- __le16 rate_n_flags;
-
- /* TID for which to add block-ack support.
- * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
- u8 add_immediate_ba_tid;
-
- /* TID for which to remove block-ack support.
- * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */
- u8 remove_immediate_ba_tid;
-
- /* Starting Sequence Number for added block-ack support.
- * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
- __le16 add_immediate_ba_ssn;
-} __packed;
-
-struct il4965_addsta_cmd {
- u8 mode; /* 1: modify existing, 0: add new station */
- u8 reserved[3];
- struct sta_id_modify sta;
- struct il4965_keyinfo key;
- __le32 station_flags; /* STA_FLG_* */
- __le32 station_flags_msk; /* STA_FLG_* */
-
- /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID)
- * corresponding to bit (e.g. bit 5 controls TID 5).
- * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
- __le16 tid_disable_tx;
-
- __le16 reserved1;
-
- /* TID for which to add block-ack support.
- * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
- u8 add_immediate_ba_tid;
-
- /* TID for which to remove block-ack support.
- * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */
- u8 remove_immediate_ba_tid;
-
- /* Starting Sequence Number for added block-ack support.
- * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
- __le16 add_immediate_ba_ssn;
-
- /*
- * Number of packets OK to transmit to station even though
- * it is asleep -- used to synchronise PS-poll and u-APSD
- * responses while ucode keeps track of STA sleep state.
- */
- __le16 sleep_tx_count;
-
- __le16 reserved2;
-} __packed;
-
-/* Wrapper struct for 3945 and 4965 addsta_cmd structures */
-struct il_addsta_cmd {
- u8 mode; /* 1: modify existing, 0: add new station */
- u8 reserved[3];
- struct sta_id_modify sta;
- struct il4965_keyinfo key;
- __le32 station_flags; /* STA_FLG_* */
- __le32 station_flags_msk; /* STA_FLG_* */
-
- /* bit field to disable (1) or enable (0) Tx for Traffic ID (TID)
- * corresponding to bit (e.g. bit 5 controls TID 5).
- * Set modify_mask bit STA_MODIFY_TID_DISABLE_TX to use this field. */
- __le16 tid_disable_tx;
-
- __le16 rate_n_flags; /* 3945 only */
-
- /* TID for which to add block-ack support.
- * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
- u8 add_immediate_ba_tid;
-
- /* TID for which to remove block-ack support.
- * Set modify_mask bit STA_MODIFY_DELBA_TID_MSK to use this field. */
- u8 remove_immediate_ba_tid;
-
- /* Starting Sequence Number for added block-ack support.
- * Set modify_mask bit STA_MODIFY_ADDBA_TID_MSK to use this field. */
- __le16 add_immediate_ba_ssn;
-
- /*
- * Number of packets OK to transmit to station even though
- * it is asleep -- used to synchronise PS-poll and u-APSD
- * responses while ucode keeps track of STA sleep state.
- */
- __le16 sleep_tx_count;
-
- __le16 reserved2;
-} __packed;
-
-
-#define ADD_STA_SUCCESS_MSK 0x1
-#define ADD_STA_NO_ROOM_IN_TBL 0x2
-#define ADD_STA_NO_BLOCK_ACK_RESOURCE 0x4
-#define ADD_STA_MODIFY_NON_EXIST_STA 0x8
-/*
- * C_ADD_STA = 0x18 (response)
- */
-struct il_add_sta_resp {
- u8 status; /* ADD_STA_* */
-} __packed;
-
-#define REM_STA_SUCCESS_MSK 0x1
-/*
- * C_REM_STA = 0x19 (response)
- */
-struct il_rem_sta_resp {
- u8 status;
-} __packed;
-
-/*
- * C_REM_STA = 0x19 (command)
- */
-struct il_rem_sta_cmd {
- u8 num_sta; /* number of removed stations */
- u8 reserved[3];
- u8 addr[ETH_ALEN]; /* MAC addr of the first station */
- u8 reserved2[2];
-} __packed;
-
-#define IL_TX_FIFO_BK_MSK cpu_to_le32(BIT(0))
-#define IL_TX_FIFO_BE_MSK cpu_to_le32(BIT(1))
-#define IL_TX_FIFO_VI_MSK cpu_to_le32(BIT(2))
-#define IL_TX_FIFO_VO_MSK cpu_to_le32(BIT(3))
-#define IL_AGG_TX_QUEUE_MSK cpu_to_le32(0xffc00)
-
-#define IL_DROP_SINGLE 0
-#define IL_DROP_SELECTED 1
-#define IL_DROP_ALL 2
-
-/*
- * REPLY_WEP_KEY = 0x20
- */
-struct il_wep_key {
- u8 key_idx;
- u8 key_offset;
- u8 reserved1[2];
- u8 key_size;
- u8 reserved2[3];
- u8 key[16];
-} __packed;
-
-struct il_wep_cmd {
- u8 num_keys;
- u8 global_key_type;
- u8 flags;
- u8 reserved;
- struct il_wep_key key[0];
-} __packed;
-
-#define WEP_KEY_WEP_TYPE 1
-#define WEP_KEYS_MAX 4
-#define WEP_INVALID_OFFSET 0xff
-#define WEP_KEY_LEN_64 5
-#define WEP_KEY_LEN_128 13
-
-/******************************************************************************
- * (4)
- * Rx Responses:
- *
- *****************************************************************************/
-
-#define RX_RES_STATUS_NO_CRC32_ERROR cpu_to_le32(1 << 0)
-#define RX_RES_STATUS_NO_RXE_OVERFLOW cpu_to_le32(1 << 1)
-
-#define RX_RES_PHY_FLAGS_BAND_24_MSK cpu_to_le16(1 << 0)
-#define RX_RES_PHY_FLAGS_MOD_CCK_MSK cpu_to_le16(1 << 1)
-#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2)
-#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3)
-#define RX_RES_PHY_FLAGS_ANTENNA_MSK 0xf0
-#define RX_RES_PHY_FLAGS_ANTENNA_POS 4
-
-#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8)
-#define RX_RES_STATUS_SEC_TYPE_NONE (0x0 << 8)
-#define RX_RES_STATUS_SEC_TYPE_WEP (0x1 << 8)
-#define RX_RES_STATUS_SEC_TYPE_CCMP (0x2 << 8)
-#define RX_RES_STATUS_SEC_TYPE_TKIP (0x3 << 8)
-#define RX_RES_STATUS_SEC_TYPE_ERR (0x7 << 8)
-
-#define RX_RES_STATUS_STATION_FOUND (1<<6)
-#define RX_RES_STATUS_NO_STATION_INFO_MISMATCH (1<<7)
-
-#define RX_RES_STATUS_DECRYPT_TYPE_MSK (0x3 << 11)
-#define RX_RES_STATUS_NOT_DECRYPT (0x0 << 11)
-#define RX_RES_STATUS_DECRYPT_OK (0x3 << 11)
-#define RX_RES_STATUS_BAD_ICV_MIC (0x1 << 11)
-#define RX_RES_STATUS_BAD_KEY_TTAK (0x2 << 11)
-
-#define RX_MPDU_RES_STATUS_ICV_OK (0x20)
-#define RX_MPDU_RES_STATUS_MIC_OK (0x40)
-#define RX_MPDU_RES_STATUS_TTAK_OK (1 << 7)
-#define RX_MPDU_RES_STATUS_DEC_DONE_MSK (0x800)
-
-
-struct il3945_rx_frame_stats {
- u8 phy_count;
- u8 id;
- u8 rssi;
- u8 agc;
- __le16 sig_avg;
- __le16 noise_diff;
- u8 payload[0];
-} __packed;
-
-struct il3945_rx_frame_hdr {
- __le16 channel;
- __le16 phy_flags;
- u8 reserved1;
- u8 rate;
- __le16 len;
- u8 payload[0];
-} __packed;
-
-struct il3945_rx_frame_end {
- __le32 status;
- __le64 timestamp;
- __le32 beacon_timestamp;
-} __packed;
-
-/*
- * N_3945_RX = 0x1b (response only, not a command)
- *
- * NOTE: DO NOT dereference from casts to this structure
- * It is provided only for calculating minimum data set size.
- * The actual offsets of the hdr and end are dynamic based on
- * stats.phy_count
- */
-struct il3945_rx_frame {
- struct il3945_rx_frame_stats stats;
- struct il3945_rx_frame_hdr hdr;
- struct il3945_rx_frame_end end;
-} __packed;
-
-#define IL39_RX_FRAME_SIZE (4 + sizeof(struct il3945_rx_frame))
-
-/* Fixed (non-configurable) rx data from phy */
-
-#define IL49_RX_RES_PHY_CNT 14
-#define IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET (4)
-#define IL49_RX_PHY_FLAGS_ANTENNAE_MASK (0x70)
-#define IL49_AGC_DB_MASK (0x3f80) /* MASK(7,13) */
-#define IL49_AGC_DB_POS (7)
-struct il4965_rx_non_cfg_phy {
- __le16 ant_selection; /* ant A bit 4, ant B bit 5, ant C bit 6 */
- __le16 agc_info; /* agc code 0:6, agc dB 7:13, reserved 14:15 */
- u8 rssi_info[6]; /* we use even entries, 0/2/4 for A/B/C rssi */
- u8 pad[0];
-} __packed;
-
-
-/*
- * N_RX = 0xc3 (response only, not a command)
- * Used only for legacy (non 11n) frames.
- */
-struct il_rx_phy_res {
- u8 non_cfg_phy_cnt; /* non configurable DSP phy data byte count */
- u8 cfg_phy_cnt; /* configurable DSP phy data byte count */
- u8 stat_id; /* configurable DSP phy data set ID */
- u8 reserved1;
- __le64 timestamp; /* TSF at on air rise */
- __le32 beacon_time_stamp; /* beacon at on-air rise */
- __le16 phy_flags; /* general phy flags: band, modulation, ... */
- __le16 channel; /* channel number */
- u8 non_cfg_phy_buf[32]; /* for various implementations of non_cfg_phy */
- __le32 rate_n_flags; /* RATE_MCS_* */
- __le16 byte_count; /* frame's byte-count */
- __le16 frame_time; /* frame's time on the air */
-} __packed;
-
-struct il_rx_mpdu_res_start {
- __le16 byte_count;
- __le16 reserved;
-} __packed;
-
-
-/******************************************************************************
- * (5)
- * Tx Commands & Responses:
- *
- * Driver must place each C_TX command into one of the prioritized Tx
- * queues in host DRAM, shared between driver and device (see comments for
- * SCD registers and Tx/Rx Queues). When the device's Tx scheduler and uCode
- * are preparing to transmit, the device pulls the Tx command over the PCI
- * bus via one of the device's Tx DMA channels, to fill an internal FIFO
- * from which data will be transmitted.
- *
- * uCode handles all timing and protocol related to control frames
- * (RTS/CTS/ACK), based on flags in the Tx command. uCode and Tx scheduler
- * handle reception of block-acks; uCode updates the host driver via
- * N_COMPRESSED_BA.
- *
- * uCode handles retrying Tx when an ACK is expected but not received.
- * This includes trying lower data rates than the one requested in the Tx
- * command, as set up by the C_RATE_SCALE (for 3945) or
- * C_TX_LINK_QUALITY_CMD (4965).
- *
- * Driver sets up transmit power for various rates via C_TX_PWR_TBL.
- * This command must be executed after every RXON command, before Tx can occur.
- *****************************************************************************/
-
-/* C_TX Tx flags field */
-
-/*
- * 1: Use Request-To-Send protocol before this frame.
- * Mutually exclusive vs. TX_CMD_FLG_CTS_MSK.
- */
-#define TX_CMD_FLG_RTS_MSK cpu_to_le32(1 << 1)
-
-/*
- * 1: Transmit Clear-To-Send to self before this frame.
- * Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames.
- * Mutually exclusive vs. TX_CMD_FLG_RTS_MSK.
- */
-#define TX_CMD_FLG_CTS_MSK cpu_to_le32(1 << 2)
-
-/* 1: Expect ACK from receiving station
- * 0: Don't expect ACK (MAC header's duration field s/b 0)
- * Set this for unicast frames, but not broadcast/multicast. */
-#define TX_CMD_FLG_ACK_MSK cpu_to_le32(1 << 3)
-
-/* For 4965 devices:
- * 1: Use rate scale table (see C_TX_LINK_QUALITY_CMD).
- * Tx command's initial_rate_idx indicates first rate to try;
- * uCode walks through table for additional Tx attempts.
- * 0: Use Tx rate/MCS from Tx command's rate_n_flags field.
- * This rate will be used for all Tx attempts; it will not be scaled. */
-#define TX_CMD_FLG_STA_RATE_MSK cpu_to_le32(1 << 4)
-
-/* 1: Expect immediate block-ack.
- * Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */
-#define TX_CMD_FLG_IMM_BA_RSP_MASK cpu_to_le32(1 << 6)
-
-/*
- * 1: Frame requires full Tx-Op protection.
- * Set this if either RTS or CTS Tx Flag gets set.
- */
-#define TX_CMD_FLG_FULL_TXOP_PROT_MSK cpu_to_le32(1 << 7)
-
-/* Tx antenna selection field; used only for 3945, reserved (0) for 4965 devices.
- * Set field to "0" to allow 3945 uCode to select antenna (normal usage). */
-#define TX_CMD_FLG_ANT_SEL_MSK cpu_to_le32(0xf00)
-#define TX_CMD_FLG_ANT_A_MSK cpu_to_le32(1 << 8)
-#define TX_CMD_FLG_ANT_B_MSK cpu_to_le32(1 << 9)
-
-/* 1: uCode overrides sequence control field in MAC header.
- * 0: Driver provides sequence control field in MAC header.
- * Set this for management frames, non-QOS data frames, non-unicast frames,
- * and also in Tx command embedded in C_SCAN for active scans. */
-#define TX_CMD_FLG_SEQ_CTL_MSK cpu_to_le32(1 << 13)
-
-/* 1: This frame is non-last MPDU; more fragments are coming.
- * 0: Last fragment, or not using fragmentation. */
-#define TX_CMD_FLG_MORE_FRAG_MSK cpu_to_le32(1 << 14)
-
-/* 1: uCode calculates and inserts Timestamp Function (TSF) in outgoing frame.
- * 0: No TSF required in outgoing frame.
- * Set this for transmitting beacons and probe responses. */
-#define TX_CMD_FLG_TSF_MSK cpu_to_le32(1 << 16)
-
-/* 1: Driver inserted 2 bytes pad after the MAC header, for (required) dword
- * alignment of frame's payload data field.
- * 0: No pad
- * Set this for MAC headers with 26 or 30 bytes, i.e. those with QOS or ADDR4
- * field (but not both). Driver must align frame data (i.e. data following
- * MAC header) to DWORD boundary. */
-#define TX_CMD_FLG_MH_PAD_MSK cpu_to_le32(1 << 20)
-
-/* accelerate aggregation support
- * 0 - no CCMP encryption; 1 - CCMP encryption */
-#define TX_CMD_FLG_AGG_CCMP_MSK cpu_to_le32(1 << 22)
-
-/* HCCA-AP - disable duration overwriting. */
-#define TX_CMD_FLG_DUR_MSK cpu_to_le32(1 << 25)
-
-
-/*
- * TX command security control
- */
-#define TX_CMD_SEC_WEP 0x01
-#define TX_CMD_SEC_CCM 0x02
-#define TX_CMD_SEC_TKIP 0x03
-#define TX_CMD_SEC_MSK 0x03
-#define TX_CMD_SEC_SHIFT 6
-#define TX_CMD_SEC_KEY128 0x08
-
-/*
- * security overhead sizes
- */
-#define WEP_IV_LEN 4
-#define WEP_ICV_LEN 4
-#define CCMP_MIC_LEN 8
-#define TKIP_ICV_LEN 4
-
-/*
- * C_TX = 0x1c (command)
- */
-
-struct il3945_tx_cmd {
- /*
- * MPDU byte count:
- * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size,
- * + 8 byte IV for CCM or TKIP (not used for WEP)
- * + Data payload
- * + 8-byte MIC (not used for CCM/WEP)
- * NOTE: Does not include Tx command bytes, post-MAC pad bytes,
- * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i
- * Range: 14-2342 bytes.
- */
- __le16 len;
-
- /*
- * MPDU or MSDU byte count for next frame.
- * Used for fragmentation and bursting, but not 11n aggregation.
- * Same as "len", but for next frame. Set to 0 if not applicable.
- */
- __le16 next_frame_len;
-
- __le32 tx_flags; /* TX_CMD_FLG_* */
-
- u8 rate;
-
- /* Index of recipient station in uCode's station table */
- u8 sta_id;
- u8 tid_tspec;
- u8 sec_ctl;
- u8 key[16];
- union {
- u8 byte[8];
- __le16 word[4];
- __le32 dw[2];
- } tkip_mic;
- __le32 next_frame_info;
- union {
- __le32 life_time;
- __le32 attempt;
- } stop_time;
- u8 supp_rates[2];
- u8 rts_retry_limit; /*byte 50 */
- u8 data_retry_limit; /*byte 51 */
- union {
- __le16 pm_frame_timeout;
- __le16 attempt_duration;
- } timeout;
-
- /*
- * Duration of EDCA burst Tx Opportunity, in 32-usec units.
- * Set this if txop time is not specified by HCCA protocol (e.g. by AP).
- */
- __le16 driver_txop;
-
- /*
- * MAC header goes here, followed by 2 bytes padding if MAC header
- * length is 26 or 30 bytes, followed by payload data
- */
- u8 payload[0];
- struct ieee80211_hdr hdr[0];
-} __packed;
-
-/*
- * C_TX = 0x1c (response)
- */
-struct il3945_tx_resp {
- u8 failure_rts;
- u8 failure_frame;
- u8 bt_kill_count;
- u8 rate;
- __le32 wireless_media_time;
- __le32 status; /* TX status */
-} __packed;
-
-
-/*
- * 4965 uCode updates these Tx attempt count values in host DRAM.
- * Used for managing Tx retries when expecting block-acks.
- * Driver should set these fields to 0.
- */
-struct il_dram_scratch {
- u8 try_cnt; /* Tx attempts */
- u8 bt_kill_cnt; /* Tx attempts blocked by Bluetooth device */
- __le16 reserved;
-} __packed;
-
-struct il_tx_cmd {
- /*
- * MPDU byte count:
- * MAC header (24/26/30/32 bytes) + 2 bytes pad if 26/30 header size,
- * + 8 byte IV for CCM or TKIP (not used for WEP)
- * + Data payload
- * + 8-byte MIC (not used for CCM/WEP)
- * NOTE: Does not include Tx command bytes, post-MAC pad bytes,
- * MIC (CCM) 8 bytes, ICV (WEP/TKIP/CKIP) 4 bytes, CRC 4 bytes.i
- * Range: 14-2342 bytes.
- */
- __le16 len;
-
- /*
- * MPDU or MSDU byte count for next frame.
- * Used for fragmentation and bursting, but not 11n aggregation.
- * Same as "len", but for next frame. Set to 0 if not applicable.
- */
- __le16 next_frame_len;
-
- __le32 tx_flags; /* TX_CMD_FLG_* */
-
- /* uCode may modify this field of the Tx command (in host DRAM!).
- * Driver must also set dram_lsb_ptr and dram_msb_ptr in this cmd. */
- struct il_dram_scratch scratch;
-
- /* Rate for *all* Tx attempts, if TX_CMD_FLG_STA_RATE_MSK is cleared. */
- __le32 rate_n_flags; /* RATE_MCS_* */
-
- /* Index of destination station in uCode's station table */
- u8 sta_id;
-
- /* Type of security encryption: CCM or TKIP */
- u8 sec_ctl; /* TX_CMD_SEC_* */
-
- /*
- * Index into rate table (see C_TX_LINK_QUALITY_CMD) for initial
- * Tx attempt, if TX_CMD_FLG_STA_RATE_MSK is set. Normally "0" for
- * data frames, this field may be used to selectively reduce initial
- * rate (via non-0 value) for special frames (e.g. management), while
- * still supporting rate scaling for all frames.
- */
- u8 initial_rate_idx;
- u8 reserved;
- u8 key[16];
- __le16 next_frame_flags;
- __le16 reserved2;
- union {
- __le32 life_time;
- __le32 attempt;
- } stop_time;
-
- /* Host DRAM physical address pointer to "scratch" in this command.
- * Must be dword aligned. "0" in dram_lsb_ptr disables usage. */
- __le32 dram_lsb_ptr;
- u8 dram_msb_ptr;
-
- u8 rts_retry_limit; /*byte 50 */
- u8 data_retry_limit; /*byte 51 */
- u8 tid_tspec;
- union {
- __le16 pm_frame_timeout;
- __le16 attempt_duration;
- } timeout;
-
- /*
- * Duration of EDCA burst Tx Opportunity, in 32-usec units.
- * Set this if txop time is not specified by HCCA protocol (e.g. by AP).
- */
- __le16 driver_txop;
-
- /*
- * MAC header goes here, followed by 2 bytes padding if MAC header
- * length is 26 or 30 bytes, followed by payload data
- */
- u8 payload[0];
- struct ieee80211_hdr hdr[0];
-} __packed;
-
-/* TX command response is sent after *3945* transmission attempts.
- *
- * NOTES:
- *
- * TX_STATUS_FAIL_NEXT_FRAG
- *
- * If the fragment flag in the MAC header for the frame being transmitted
- * is set and there is insufficient time to transmit the next frame, the
- * TX status will be returned with 'TX_STATUS_FAIL_NEXT_FRAG'.
- *
- * TX_STATUS_FIFO_UNDERRUN
- *
- * Indicates the host did not provide bytes to the FIFO fast enough while
- * a TX was in progress.
- *
- * TX_STATUS_FAIL_MGMNT_ABORT
- *
- * This status is only possible if the ABORT ON MGMT RX parameter was
- * set to true with the TX command.
- *
- * If the MSB of the status parameter is set then an abort sequence is
- * required. This sequence consists of the host activating the TX Abort
- * control line, and then waiting for the TX Abort command response. This
- * indicates that a the device is no longer in a transmit state, and that the
- * command FIFO has been cleared. The host must then deactivate the TX Abort
- * control line. Receiving is still allowed in this case.
- */
-enum {
- TX_3945_STATUS_SUCCESS = 0x01,
- TX_3945_STATUS_DIRECT_DONE = 0x02,
- TX_3945_STATUS_FAIL_SHORT_LIMIT = 0x82,
- TX_3945_STATUS_FAIL_LONG_LIMIT = 0x83,
- TX_3945_STATUS_FAIL_FIFO_UNDERRUN = 0x84,
- TX_3945_STATUS_FAIL_MGMNT_ABORT = 0x85,
- TX_3945_STATUS_FAIL_NEXT_FRAG = 0x86,
- TX_3945_STATUS_FAIL_LIFE_EXPIRE = 0x87,
- TX_3945_STATUS_FAIL_DEST_PS = 0x88,
- TX_3945_STATUS_FAIL_ABORTED = 0x89,
- TX_3945_STATUS_FAIL_BT_RETRY = 0x8a,
- TX_3945_STATUS_FAIL_STA_INVALID = 0x8b,
- TX_3945_STATUS_FAIL_FRAG_DROPPED = 0x8c,
- TX_3945_STATUS_FAIL_TID_DISABLE = 0x8d,
- TX_3945_STATUS_FAIL_FRAME_FLUSHED = 0x8e,
- TX_3945_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f,
- TX_3945_STATUS_FAIL_TX_LOCKED = 0x90,
- TX_3945_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91,
-};
-
-/*
- * TX command response is sent after *4965* transmission attempts.
- *
- * both postpone and abort status are expected behavior from uCode. there is
- * no special operation required from driver; except for RFKILL_FLUSH,
- * which required tx flush host command to flush all the tx frames in queues
- */
-enum {
- TX_STATUS_SUCCESS = 0x01,
- TX_STATUS_DIRECT_DONE = 0x02,
- /* postpone TX */
- TX_STATUS_POSTPONE_DELAY = 0x40,
- TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
- TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
- TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
- /* abort TX */
- TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
- TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
- TX_STATUS_FAIL_LONG_LIMIT = 0x83,
- TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84,
- TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
- TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
- TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
- TX_STATUS_FAIL_DEST_PS = 0x88,
- TX_STATUS_FAIL_HOST_ABORTED = 0x89,
- TX_STATUS_FAIL_BT_RETRY = 0x8a,
- TX_STATUS_FAIL_STA_INVALID = 0x8b,
- TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
- TX_STATUS_FAIL_TID_DISABLE = 0x8d,
- TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
- TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f,
- TX_STATUS_FAIL_PASSIVE_NO_RX = 0x90,
- TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91,
-};
-
-#define TX_PACKET_MODE_REGULAR 0x0000
-#define TX_PACKET_MODE_BURST_SEQ 0x0100
-#define TX_PACKET_MODE_BURST_FIRST 0x0200
-
-enum {
- TX_POWER_PA_NOT_ACTIVE = 0x0,
-};
-
-enum {
- TX_STATUS_MSK = 0x000000ff, /* bits 0:7 */
- TX_STATUS_DELAY_MSK = 0x00000040,
- TX_STATUS_ABORT_MSK = 0x00000080,
- TX_PACKET_MODE_MSK = 0x0000ff00, /* bits 8:15 */
- TX_FIFO_NUMBER_MSK = 0x00070000, /* bits 16:18 */
- TX_RESERVED = 0x00780000, /* bits 19:22 */
- TX_POWER_PA_DETECT_MSK = 0x7f800000, /* bits 23:30 */
- TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */
-};
-
-/* *******************************
- * TX aggregation status
- ******************************* */
-
-enum {
- AGG_TX_STATE_TRANSMITTED = 0x00,
- AGG_TX_STATE_UNDERRUN_MSK = 0x01,
- AGG_TX_STATE_FEW_BYTES_MSK = 0x04,
- AGG_TX_STATE_ABORT_MSK = 0x08,
- AGG_TX_STATE_LAST_SENT_TTL_MSK = 0x10,
- AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK = 0x20,
- AGG_TX_STATE_SCD_QUERY_MSK = 0x80,
- AGG_TX_STATE_TEST_BAD_CRC32_MSK = 0x100,
- AGG_TX_STATE_RESPONSE_MSK = 0x1ff,
- AGG_TX_STATE_DUMP_TX_MSK = 0x200,
- AGG_TX_STATE_DELAY_TX_MSK = 0x400
-};
-
-#define AGG_TX_STATUS_MSK 0x00000fff /* bits 0:11 */
-#define AGG_TX_TRY_MSK 0x0000f000 /* bits 12:15 */
-
-#define AGG_TX_STATE_LAST_SENT_MSK (AGG_TX_STATE_LAST_SENT_TTL_MSK | \
- AGG_TX_STATE_LAST_SENT_TRY_CNT_MSK)
-
-/* # tx attempts for first frame in aggregation */
-#define AGG_TX_STATE_TRY_CNT_POS 12
-#define AGG_TX_STATE_TRY_CNT_MSK 0xf000
-
-/* Command ID and sequence number of Tx command for this frame */
-#define AGG_TX_STATE_SEQ_NUM_POS 16
-#define AGG_TX_STATE_SEQ_NUM_MSK 0xffff0000
-
-/*
- * C_TX = 0x1c (response)
- *
- * This response may be in one of two slightly different formats, indicated
- * by the frame_count field:
- *
- * 1) No aggregation (frame_count == 1). This reports Tx results for
- * a single frame. Multiple attempts, at various bit rates, may have
- * been made for this frame.
- *
- * 2) Aggregation (frame_count > 1). This reports Tx results for
- * 2 or more frames that used block-acknowledge. All frames were
- * transmitted at same rate. Rate scaling may have been used if first
- * frame in this new agg block failed in previous agg block(s).
- *
- * Note that, for aggregation, ACK (block-ack) status is not delivered here;
- * block-ack has not been received by the time the 4965 device records
- * this status.
- * This status relates to reasons the tx might have been blocked or aborted
- * within the sending station (this 4965 device), rather than whether it was
- * received successfully by the destination station.
- */
-struct agg_tx_status {
- __le16 status;
- __le16 sequence;
-} __packed;
-
-struct il4965_tx_resp {
- u8 frame_count; /* 1 no aggregation, >1 aggregation */
- u8 bt_kill_count; /* # blocked by bluetooth (unused for agg) */
- u8 failure_rts; /* # failures due to unsuccessful RTS */
- u8 failure_frame; /* # failures due to no ACK (unused for agg) */
-
- /* For non-agg: Rate at which frame was successful.
- * For agg: Rate at which all frames were transmitted. */
- __le32 rate_n_flags; /* RATE_MCS_* */
-
- /* For non-agg: RTS + CTS + frame tx attempts time + ACK.
- * For agg: RTS + CTS + aggregation tx time + block-ack time. */
- __le16 wireless_media_time; /* uSecs */
-
- __le16 reserved;
- __le32 pa_power1; /* RF power amplifier measurement (not used) */
- __le32 pa_power2;
-
- /*
- * For non-agg: frame status TX_STATUS_*
- * For agg: status of 1st frame, AGG_TX_STATE_*; other frame status
- * fields follow this one, up to frame_count.
- * Bit fields:
- * 11- 0: AGG_TX_STATE_* status code
- * 15-12: Retry count for 1st frame in aggregation (retries
- * occur if tx failed for this frame when it was a
- * member of a previous aggregation block). If rate
- * scaling is used, retry count indicates the rate
- * table entry used for all frames in the new agg.
- * 31-16: Sequence # for this frame's Tx cmd (not SSN!)
- */
- union {
- __le32 status;
- struct agg_tx_status agg_status[0]; /* for each agg frame */
- } u;
-} __packed;
-
-/*
- * N_COMPRESSED_BA = 0xc5 (response only, not a command)
- *
- * Reports Block-Acknowledge from recipient station
- */
-struct il_compressed_ba_resp {
- __le32 sta_addr_lo32;
- __le16 sta_addr_hi16;
- __le16 reserved;
-
- /* Index of recipient (BA-sending) station in uCode's station table */
- u8 sta_id;
- u8 tid;
- __le16 seq_ctl;
- __le64 bitmap;
- __le16 scd_flow;
- __le16 scd_ssn;
-} __packed;
-
-/*
- * C_TX_PWR_TBL = 0x97 (command, has simple generic response)
- *
- * See details under "TXPOWER" in 4965.h.
- */
-
-struct il3945_txpowertable_cmd {
- u8 band; /* 0: 5 GHz, 1: 2.4 GHz */
- u8 reserved;
- __le16 channel;
- struct il3945_power_per_rate power[IL_MAX_RATES];
-} __packed;
-
-struct il4965_txpowertable_cmd {
- u8 band; /* 0: 5 GHz, 1: 2.4 GHz */
- u8 reserved;
- __le16 channel;
- struct il4965_tx_power_db tx_power;
-} __packed;
-
-
-/**
- * struct il3945_rate_scaling_cmd - Rate Scaling Command & Response
- *
- * C_RATE_SCALE = 0x47 (command, has simple generic response)
- *
- * NOTE: The table of rates passed to the uCode via the
- * RATE_SCALE command sets up the corresponding order of
- * rates used for all related commands, including rate
- * masks, etc.
- *
- * For example, if you set 9MB (PLCP 0x0f) as the first
- * rate in the rate table, the bit mask for that rate
- * when passed through ofdm_basic_rates on the C_RXON
- * command would be bit 0 (1 << 0)
- */
-struct il3945_rate_scaling_info {
- __le16 rate_n_flags;
- u8 try_cnt;
- u8 next_rate_idx;
-} __packed;
-
-struct il3945_rate_scaling_cmd {
- u8 table_id;
- u8 reserved[3];
- struct il3945_rate_scaling_info table[IL_MAX_RATES];
-} __packed;
-
-
-/*RS_NEW_API: only TLC_RTS remains and moved to bit 0 */
-#define LINK_QUAL_FLAGS_SET_STA_TLC_RTS_MSK (1 << 0)
-
-/* # of EDCA prioritized tx fifos */
-#define LINK_QUAL_AC_NUM AC_NUM
-
-/* # entries in rate scale table to support Tx retries */
-#define LINK_QUAL_MAX_RETRY_NUM 16
-
-/* Tx antenna selection values */
-#define LINK_QUAL_ANT_A_MSK (1 << 0)
-#define LINK_QUAL_ANT_B_MSK (1 << 1)
-#define LINK_QUAL_ANT_MSK (LINK_QUAL_ANT_A_MSK|LINK_QUAL_ANT_B_MSK)
-
-
-/**
- * struct il_link_qual_general_params
- *
- * Used in C_TX_LINK_QUALITY_CMD
- */
-struct il_link_qual_general_params {
- u8 flags;
-
- /* No entries at or above this (driver chosen) idx contain MIMO */
- u8 mimo_delimiter;
-
- /* Best single antenna to use for single stream (legacy, SISO). */
- u8 single_stream_ant_msk; /* LINK_QUAL_ANT_* */
-
- /* Best antennas to use for MIMO (unused for 4965, assumes both). */
- u8 dual_stream_ant_msk; /* LINK_QUAL_ANT_* */
-
- /*
- * If driver needs to use different initial rates for different
- * EDCA QOS access categories (as implemented by tx fifos 0-3),
- * this table will set that up, by indicating the idxes in the
- * rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table at which to start.
- * Otherwise, driver should set all entries to 0.
- *
- * Entry usage:
- * 0 = Background, 1 = Best Effort (normal), 2 = Video, 3 = Voice
- * TX FIFOs above 3 use same value (typically 0) as TX FIFO 3.
- */
- u8 start_rate_idx[LINK_QUAL_AC_NUM];
-} __packed;
-
-#define LINK_QUAL_AGG_TIME_LIMIT_DEF (4000) /* 4 milliseconds */
-#define LINK_QUAL_AGG_TIME_LIMIT_MAX (8000)
-#define LINK_QUAL_AGG_TIME_LIMIT_MIN (100)
-
-#define LINK_QUAL_AGG_DISABLE_START_DEF (3)
-#define LINK_QUAL_AGG_DISABLE_START_MAX (255)
-#define LINK_QUAL_AGG_DISABLE_START_MIN (0)
-
-#define LINK_QUAL_AGG_FRAME_LIMIT_DEF (31)
-#define LINK_QUAL_AGG_FRAME_LIMIT_MAX (63)
-#define LINK_QUAL_AGG_FRAME_LIMIT_MIN (0)
-
-/**
- * struct il_link_qual_agg_params
- *
- * Used in C_TX_LINK_QUALITY_CMD
- */
-struct il_link_qual_agg_params {
-
- /*
- *Maximum number of uSec in aggregation.
- * default set to 4000 (4 milliseconds) if not configured in .cfg
- */
- __le16 agg_time_limit;
-
- /*
- * Number of Tx retries allowed for a frame, before that frame will
- * no longer be considered for the start of an aggregation sequence
- * (scheduler will then try to tx it as single frame).
- * Driver should set this to 3.
- */
- u8 agg_dis_start_th;
-
- /*
- * Maximum number of frames in aggregation.
- * 0 = no limit (default). 1 = no aggregation.
- * Other values = max # frames in aggregation.
- */
- u8 agg_frame_cnt_limit;
-
- __le32 reserved;
-} __packed;
-
-/*
- * C_TX_LINK_QUALITY_CMD = 0x4e (command, has simple generic response)
- *
- * For 4965 devices only; 3945 uses C_RATE_SCALE.
- *
- * Each station in the 4965 device's internal station table has its own table
- * of 16
- * Tx rates and modulation modes (e.g. legacy/SISO/MIMO) for retrying Tx when
- * an ACK is not received. This command replaces the entire table for
- * one station.
- *
- * NOTE: Station must already be in 4965 device's station table.
- * Use C_ADD_STA.
- *
- * The rate scaling procedures described below work well. Of course, other
- * procedures are possible, and may work better for particular environments.
- *
- *
- * FILLING THE RATE TBL
- *
- * Given a particular initial rate and mode, as determined by the rate
- * scaling algorithm described below, the Linux driver uses the following
- * formula to fill the rs_table[LINK_QUAL_MAX_RETRY_NUM] rate table in the
- * Link Quality command:
- *
- *
- * 1) If using High-throughput (HT) (SISO or MIMO) initial rate:
- * a) Use this same initial rate for first 3 entries.
- * b) Find next lower available rate using same mode (SISO or MIMO),
- * use for next 3 entries. If no lower rate available, switch to
- * legacy mode (no HT40 channel, no MIMO, no short guard interval).
- * c) If using MIMO, set command's mimo_delimiter to number of entries
- * using MIMO (3 or 6).
- * d) After trying 2 HT rates, switch to legacy mode (no HT40 channel,
- * no MIMO, no short guard interval), at the next lower bit rate
- * (e.g. if second HT bit rate was 54, try 48 legacy), and follow
- * legacy procedure for remaining table entries.
- *
- * 2) If using legacy initial rate:
- * a) Use the initial rate for only one entry.
- * b) For each following entry, reduce the rate to next lower available
- * rate, until reaching the lowest available rate.
- * c) When reducing rate, also switch antenna selection.
- * d) Once lowest available rate is reached, repeat this rate until
- * rate table is filled (16 entries), switching antenna each entry.
- *
- *
- * ACCUMULATING HISTORY
- *
- * The rate scaling algorithm for 4965 devices, as implemented in Linux driver,
- * uses two sets of frame Tx success history: One for the current/active
- * modulation mode, and one for a speculative/search mode that is being
- * attempted. If the speculative mode turns out to be more effective (i.e.
- * actual transfer rate is better), then the driver continues to use the
- * speculative mode as the new current active mode.
- *
- * Each history set contains, separately for each possible rate, data for a
- * sliding win of the 62 most recent tx attempts at that rate. The data
- * includes a shifting bitmap of success(1)/failure(0), and sums of successful
- * and attempted frames, from which the driver can additionally calculate a
- * success ratio (success / attempted) and number of failures
- * (attempted - success), and control the size of the win (attempted).
- * The driver uses the bit map to remove successes from the success sum, as
- * the oldest tx attempts fall out of the win.
- *
- * When the 4965 device makes multiple tx attempts for a given frame, each
- * attempt might be at a different rate, and have different modulation
- * characteristics (e.g. antenna, fat channel, short guard interval), as set
- * up in the rate scaling table in the Link Quality command. The driver must
- * determine which rate table entry was used for each tx attempt, to determine
- * which rate-specific history to update, and record only those attempts that
- * match the modulation characteristics of the history set.
- *
- * When using block-ack (aggregation), all frames are transmitted at the same
- * rate, since there is no per-attempt acknowledgment from the destination
- * station. The Tx response struct il_tx_resp indicates the Tx rate in
- * rate_n_flags field. After receiving a block-ack, the driver can update
- * history for the entire block all at once.
- *
- *
- * FINDING BEST STARTING RATE:
- *
- * When working with a selected initial modulation mode (see below), the
- * driver attempts to find a best initial rate. The initial rate is the
- * first entry in the Link Quality command's rate table.
- *
- * 1) Calculate actual throughput (success ratio * expected throughput, see
- * table below) for current initial rate. Do this only if enough frames
- * have been attempted to make the value meaningful: at least 6 failed
- * tx attempts, or at least 8 successes. If not enough, don't try rate
- * scaling yet.
- *
- * 2) Find available rates adjacent to current initial rate. Available means:
- * a) supported by hardware &&
- * b) supported by association &&
- * c) within any constraints selected by user
- *
- * 3) Gather measured throughputs for adjacent rates. These might not have
- * enough history to calculate a throughput. That's okay, we might try
- * using one of them anyway!
- *
- * 4) Try decreasing rate if, for current rate:
- * a) success ratio is < 15% ||
- * b) lower adjacent rate has better measured throughput ||
- * c) higher adjacent rate has worse throughput, and lower is unmeasured
- *
- * As a sanity check, if decrease was determined above, leave rate
- * unchanged if:
- * a) lower rate unavailable
- * b) success ratio at current rate > 85% (very good)
- * c) current measured throughput is better than expected throughput
- * of lower rate (under perfect 100% tx conditions, see table below)
- *
- * 5) Try increasing rate if, for current rate:
- * a) success ratio is < 15% ||
- * b) both adjacent rates' throughputs are unmeasured (try it!) ||
- * b) higher adjacent rate has better measured throughput ||
- * c) lower adjacent rate has worse throughput, and higher is unmeasured
- *
- * As a sanity check, if increase was determined above, leave rate
- * unchanged if:
- * a) success ratio at current rate < 70%. This is not particularly
- * good performance; higher rate is sure to have poorer success.
- *
- * 6) Re-evaluate the rate after each tx frame. If working with block-
- * acknowledge, history and stats may be calculated for the entire
- * block (including prior history that fits within the history wins),
- * before re-evaluation.
- *
- * FINDING BEST STARTING MODULATION MODE:
- *
- * After working with a modulation mode for a "while" (and doing rate scaling),
- * the driver searches for a new initial mode in an attempt to improve
- * throughput. The "while" is measured by numbers of attempted frames:
- *
- * For legacy mode, search for new mode after:
- * 480 successful frames, or 160 failed frames
- * For high-throughput modes (SISO or MIMO), search for new mode after:
- * 4500 successful frames, or 400 failed frames
- *
- * Mode switch possibilities are (3 for each mode):
- *
- * For legacy:
- * Change antenna, try SISO (if HT association), try MIMO (if HT association)
- * For SISO:
- * Change antenna, try MIMO, try shortened guard interval (SGI)
- * For MIMO:
- * Try SISO antenna A, SISO antenna B, try shortened guard interval (SGI)
- *
- * When trying a new mode, use the same bit rate as the old/current mode when
- * trying antenna switches and shortened guard interval. When switching to
- * SISO from MIMO or legacy, or to MIMO from SISO or legacy, use a rate
- * for which the expected throughput (under perfect conditions) is about the
- * same or slightly better than the actual measured throughput delivered by
- * the old/current mode.
- *
- * Actual throughput can be estimated by multiplying the expected throughput
- * by the success ratio (successful / attempted tx frames). Frame size is
- * not considered in this calculation; it assumes that frame size will average
- * out to be fairly consistent over several samples. The following are
- * metric values for expected throughput assuming 100% success ratio.
- * Only G band has support for CCK rates:
- *
- * RATE: 1 2 5 11 6 9 12 18 24 36 48 54 60
- *
- * G: 7 13 35 58 40 57 72 98 121 154 177 186 186
- * A: 0 0 0 0 40 57 72 98 121 154 177 186 186
- * SISO 20MHz: 0 0 0 0 42 42 76 102 124 159 183 193 202
- * SGI SISO 20MHz: 0 0 0 0 46 46 82 110 132 168 192 202 211
- * MIMO 20MHz: 0 0 0 0 74 74 123 155 179 214 236 244 251
- * SGI MIMO 20MHz: 0 0 0 0 81 81 131 164 188 222 243 251 257
- * SISO 40MHz: 0 0 0 0 77 77 127 160 184 220 242 250 257
- * SGI SISO 40MHz: 0 0 0 0 83 83 135 169 193 229 250 257 264
- * MIMO 40MHz: 0 0 0 0 123 123 182 214 235 264 279 285 289
- * SGI MIMO 40MHz: 0 0 0 0 131 131 191 222 242 270 284 289 293
- *
- * After the new mode has been tried for a short while (minimum of 6 failed
- * frames or 8 successful frames), compare success ratio and actual throughput
- * estimate of the new mode with the old. If either is better with the new
- * mode, continue to use the new mode.
- *
- * Continue comparing modes until all 3 possibilities have been tried.
- * If moving from legacy to HT, try all 3 possibilities from the new HT
- * mode. After trying all 3, a best mode is found. Continue to use this mode
- * for the longer "while" described above (e.g. 480 successful frames for
- * legacy), and then repeat the search process.
- *
- */
-struct il_link_quality_cmd {
-
- /* Index of destination/recipient station in uCode's station table */
- u8 sta_id;
- u8 reserved1;
- __le16 control; /* not used */
- struct il_link_qual_general_params general_params;
- struct il_link_qual_agg_params agg_params;
-
- /*
- * Rate info; when using rate-scaling, Tx command's initial_rate_idx
- * specifies 1st Tx rate attempted, via idx into this table.
- * 4965 devices works its way through table when retrying Tx.
- */
- struct {
- __le32 rate_n_flags; /* RATE_MCS_*, RATE_* */
- } rs_table[LINK_QUAL_MAX_RETRY_NUM];
- __le32 reserved2;
-} __packed;
-
-/*
- * BT configuration enable flags:
- * bit 0 - 1: BT channel announcement enabled
- * 0: disable
- * bit 1 - 1: priority of BT device enabled
- * 0: disable
- */
-#define BT_COEX_DISABLE (0x0)
-#define BT_ENABLE_CHANNEL_ANNOUNCE BIT(0)
-#define BT_ENABLE_PRIORITY BIT(1)
-
-#define BT_COEX_ENABLE (BT_ENABLE_CHANNEL_ANNOUNCE | BT_ENABLE_PRIORITY)
-
-#define BT_LEAD_TIME_DEF (0x1E)
-
-#define BT_MAX_KILL_DEF (0x5)
-
-/*
- * C_BT_CONFIG = 0x9b (command, has simple generic response)
- *
- * 3945 and 4965 devices support hardware handshake with Bluetooth device on
- * same platform. Bluetooth device alerts wireless device when it will Tx;
- * wireless device can delay or kill its own Tx to accommodate.
- */
-struct il_bt_cmd {
- u8 flags;
- u8 lead_time;
- u8 max_kill;
- u8 reserved;
- __le32 kill_ack_mask;
- __le32 kill_cts_mask;
-} __packed;
-
-
-/******************************************************************************
- * (6)
- * Spectrum Management (802.11h) Commands, Responses, Notifications:
- *
- *****************************************************************************/
-
-/*
- * Spectrum Management
- */
-#define MEASUREMENT_FILTER_FLAG (RXON_FILTER_PROMISC_MSK | \
- RXON_FILTER_CTL2HOST_MSK | \
- RXON_FILTER_ACCEPT_GRP_MSK | \
- RXON_FILTER_DIS_DECRYPT_MSK | \
- RXON_FILTER_DIS_GRP_DECRYPT_MSK | \
- RXON_FILTER_ASSOC_MSK | \
- RXON_FILTER_BCON_AWARE_MSK)
-
-struct il_measure_channel {
- __le32 duration; /* measurement duration in extended beacon
- * format */
- u8 channel; /* channel to measure */
- u8 type; /* see enum il_measure_type */
- __le16 reserved;
-} __packed;
-
-/*
- * C_SPECTRUM_MEASUREMENT = 0x74 (command)
- */
-struct il_spectrum_cmd {
- __le16 len; /* number of bytes starting from token */
- u8 token; /* token id */
- u8 id; /* measurement id -- 0 or 1 */
- u8 origin; /* 0 = TGh, 1 = other, 2 = TGk */
- u8 periodic; /* 1 = periodic */
- __le16 path_loss_timeout;
- __le32 start_time; /* start time in extended beacon format */
- __le32 reserved2;
- __le32 flags; /* rxon flags */
- __le32 filter_flags; /* rxon filter flags */
- __le16 channel_count; /* minimum 1, maximum 10 */
- __le16 reserved3;
- struct il_measure_channel channels[10];
-} __packed;
-
-/*
- * C_SPECTRUM_MEASUREMENT = 0x74 (response)
- */
-struct il_spectrum_resp {
- u8 token;
- u8 id; /* id of the prior command replaced, or 0xff */
- __le16 status; /* 0 - command will be handled
- * 1 - cannot handle (conflicts with another
- * measurement) */
-} __packed;
-
-enum il_measurement_state {
- IL_MEASUREMENT_START = 0,
- IL_MEASUREMENT_STOP = 1,
-};
-
-enum il_measurement_status {
- IL_MEASUREMENT_OK = 0,
- IL_MEASUREMENT_CONCURRENT = 1,
- IL_MEASUREMENT_CSA_CONFLICT = 2,
- IL_MEASUREMENT_TGH_CONFLICT = 3,
- /* 4-5 reserved */
- IL_MEASUREMENT_STOPPED = 6,
- IL_MEASUREMENT_TIMEOUT = 7,
- IL_MEASUREMENT_PERIODIC_FAILED = 8,
-};
-
-#define NUM_ELEMENTS_IN_HISTOGRAM 8
-
-struct il_measurement_histogram {
- __le32 ofdm[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 0.8usec counts */
- __le32 cck[NUM_ELEMENTS_IN_HISTOGRAM]; /* in 1usec counts */
-} __packed;
-
-/* clear channel availability counters */
-struct il_measurement_cca_counters {
- __le32 ofdm;
- __le32 cck;
-} __packed;
-
-enum il_measure_type {
- IL_MEASURE_BASIC = (1 << 0),
- IL_MEASURE_CHANNEL_LOAD = (1 << 1),
- IL_MEASURE_HISTOGRAM_RPI = (1 << 2),
- IL_MEASURE_HISTOGRAM_NOISE = (1 << 3),
- IL_MEASURE_FRAME = (1 << 4),
- /* bits 5:6 are reserved */
- IL_MEASURE_IDLE = (1 << 7),
-};
-
-/*
- * N_SPECTRUM_MEASUREMENT = 0x75 (notification only, not a command)
- */
-struct il_spectrum_notification {
- u8 id; /* measurement id -- 0 or 1 */
- u8 token;
- u8 channel_idx; /* idx in measurement channel list */
- u8 state; /* 0 - start, 1 - stop */
- __le32 start_time; /* lower 32-bits of TSF */
- u8 band; /* 0 - 5.2GHz, 1 - 2.4GHz */
- u8 channel;
- u8 type; /* see enum il_measurement_type */
- u8 reserved1;
- /* NOTE: cca_ofdm, cca_cck, basic_type, and histogram are only only
- * valid if applicable for measurement type requested. */
- __le32 cca_ofdm; /* cca fraction time in 40Mhz clock periods */
- __le32 cca_cck; /* cca fraction time in 44Mhz clock periods */
- __le32 cca_time; /* channel load time in usecs */
- u8 basic_type; /* 0 - bss, 1 - ofdm preamble, 2 -
- * unidentified */
- u8 reserved2[3];
- struct il_measurement_histogram histogram;
- __le32 stop_time; /* lower 32-bits of TSF */
- __le32 status; /* see il_measurement_status */
-} __packed;
-
-/******************************************************************************
- * (7)
- * Power Management Commands, Responses, Notifications:
- *
- *****************************************************************************/
-
-/**
- * struct il_powertable_cmd - Power Table Command
- * @flags: See below:
- *
- * C_POWER_TBL = 0x77 (command, has simple generic response)
- *
- * PM allow:
- * bit 0 - '0' Driver not allow power management
- * '1' Driver allow PM (use rest of parameters)
- *
- * uCode send sleep notifications:
- * bit 1 - '0' Don't send sleep notification
- * '1' send sleep notification (SEND_PM_NOTIFICATION)
- *
- * Sleep over DTIM
- * bit 2 - '0' PM have to walk up every DTIM
- * '1' PM could sleep over DTIM till listen Interval.
- *
- * PCI power managed
- * bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1)
- * '1' !(PCI_CFG_LINK_CTRL & 0x1)
- *
- * Fast PD
- * bit 4 - '1' Put radio to sleep when receiving frame for others
- *
- * Force sleep Modes
- * bit 31/30- '00' use both mac/xtal sleeps
- * '01' force Mac sleep
- * '10' force xtal sleep
- * '11' Illegal set
- *
- * NOTE: if sleep_interval[SLEEP_INTRVL_TBL_SIZE-1] > DTIM period then
- * ucode assume sleep over DTIM is allowed and we don't need to wake up
- * for every DTIM.
- */
-#define IL_POWER_VEC_SIZE 5
-
-#define IL_POWER_DRIVER_ALLOW_SLEEP_MSK cpu_to_le16(BIT(0))
-#define IL_POWER_PCI_PM_MSK cpu_to_le16(BIT(3))
-
-struct il3945_powertable_cmd {
- __le16 flags;
- u8 reserved[2];
- __le32 rx_data_timeout;
- __le32 tx_data_timeout;
- __le32 sleep_interval[IL_POWER_VEC_SIZE];
-} __packed;
-
-struct il_powertable_cmd {
- __le16 flags;
- u8 keep_alive_seconds; /* 3945 reserved */
- u8 debug_flags; /* 3945 reserved */
- __le32 rx_data_timeout;
- __le32 tx_data_timeout;
- __le32 sleep_interval[IL_POWER_VEC_SIZE];
- __le32 keep_alive_beacons;
-} __packed;
-
-/*
- * N_PM_SLEEP = 0x7A (notification only, not a command)
- * all devices identical.
- */
-struct il_sleep_notification {
- u8 pm_sleep_mode;
- u8 pm_wakeup_src;
- __le16 reserved;
- __le32 sleep_time;
- __le32 tsf_low;
- __le32 bcon_timer;
-} __packed;
-
-/* Sleep states. all devices identical. */
-enum {
- IL_PM_NO_SLEEP = 0,
- IL_PM_SLP_MAC = 1,
- IL_PM_SLP_FULL_MAC_UNASSOCIATE = 2,
- IL_PM_SLP_FULL_MAC_CARD_STATE = 3,
- IL_PM_SLP_PHY = 4,
- IL_PM_SLP_REPENT = 5,
- IL_PM_WAKEUP_BY_TIMER = 6,
- IL_PM_WAKEUP_BY_DRIVER = 7,
- IL_PM_WAKEUP_BY_RFKILL = 8,
- /* 3 reserved */
- IL_PM_NUM_OF_MODES = 12,
-};
-
-/*
- * N_CARD_STATE = 0xa1 (notification only, not a command)
- */
-struct il_card_state_notif {
- __le32 flags;
-} __packed;
-
-#define HW_CARD_DISABLED 0x01
-#define SW_CARD_DISABLED 0x02
-#define CT_CARD_DISABLED 0x04
-#define RXON_CARD_DISABLED 0x10
-
-struct il_ct_kill_config {
- __le32 reserved;
- __le32 critical_temperature_M;
- __le32 critical_temperature_R;
-} __packed;
-
-/******************************************************************************
- * (8)
- * Scan Commands, Responses, Notifications:
- *
- *****************************************************************************/
-
-#define SCAN_CHANNEL_TYPE_PASSIVE cpu_to_le32(0)
-#define SCAN_CHANNEL_TYPE_ACTIVE cpu_to_le32(1)
-
-/**
- * struct il_scan_channel - entry in C_SCAN channel table
- *
- * One for each channel in the scan list.
- * Each channel can independently select:
- * 1) SSID for directed active scans
- * 2) Txpower setting (for rate specified within Tx command)
- * 3) How long to stay on-channel (behavior may be modified by quiet_time,
- * quiet_plcp_th, good_CRC_th)
- *
- * To avoid uCode errors, make sure the following are true (see comments
- * under struct il_scan_cmd about max_out_time and quiet_time):
- * 1) If using passive_dwell (i.e. passive_dwell != 0):
- * active_dwell <= passive_dwell (< max_out_time if max_out_time != 0)
- * 2) quiet_time <= active_dwell
- * 3) If restricting off-channel time (i.e. max_out_time !=0):
- * passive_dwell < max_out_time
- * active_dwell < max_out_time
- */
-struct il3945_scan_channel {
- /*
- * type is defined as:
- * 0:0 1 = active, 0 = passive
- * 1:4 SSID direct bit map; if a bit is set, then corresponding
- * SSID IE is transmitted in probe request.
- * 5:7 reserved
- */
- u8 type;
- u8 channel; /* band is selected by il3945_scan_cmd "flags" field */
- struct il3945_tx_power tpc;
- __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */
- __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */
-} __packed;
-
-/* set number of direct probes u8 type */
-#define IL39_SCAN_PROBE_MASK(n) ((BIT(n) | (BIT(n) - BIT(1))))
-
-struct il_scan_channel {
- /*
- * type is defined as:
- * 0:0 1 = active, 0 = passive
- * 1:20 SSID direct bit map; if a bit is set, then corresponding
- * SSID IE is transmitted in probe request.
- * 21:31 reserved
- */
- __le32 type;
- __le16 channel; /* band is selected by il_scan_cmd "flags" field */
- u8 tx_gain; /* gain for analog radio */
- u8 dsp_atten; /* gain for DSP */
- __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */
- __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */
-} __packed;
-
-/* set number of direct probes __le32 type */
-#define IL_SCAN_PROBE_MASK(n) cpu_to_le32((BIT(n) | (BIT(n) - BIT(1))))
-
-/**
- * struct il_ssid_ie - directed scan network information element
- *
- * Up to 20 of these may appear in C_SCAN (Note: Only 4 are in
- * 3945 SCAN api), selected by "type" bit field in struct il_scan_channel;
- * each channel may select different ssids from among the 20 (4) entries.
- * SSID IEs get transmitted in reverse order of entry.
- */
-struct il_ssid_ie {
- u8 id;
- u8 len;
- u8 ssid[32];
-} __packed;
-
-#define PROBE_OPTION_MAX_3945 4
-#define PROBE_OPTION_MAX 20
-#define TX_CMD_LIFE_TIME_INFINITE cpu_to_le32(0xFFFFFFFF)
-#define IL_GOOD_CRC_TH_DISABLED 0
-#define IL_GOOD_CRC_TH_DEFAULT cpu_to_le16(1)
-#define IL_GOOD_CRC_TH_NEVER cpu_to_le16(0xffff)
-#define IL_MAX_SCAN_SIZE 1024
-#define IL_MAX_CMD_SIZE 4096
-
-/*
- * C_SCAN = 0x80 (command)
- *
- * The hardware scan command is very powerful; the driver can set it up to
- * maintain (relatively) normal network traffic while doing a scan in the
- * background. The max_out_time and suspend_time control the ratio of how
- * long the device stays on an associated network channel ("service channel")
- * vs. how long it's away from the service channel, i.e. tuned to other channels
- * for scanning.
- *
- * max_out_time is the max time off-channel (in usec), and suspend_time
- * is how long (in "extended beacon" format) that the scan is "suspended"
- * after returning to the service channel. That is, suspend_time is the
- * time that we stay on the service channel, doing normal work, between
- * scan segments. The driver may set these parameters differently to support
- * scanning when associated vs. not associated, and light vs. heavy traffic
- * loads when associated.
- *
- * After receiving this command, the device's scan engine does the following;
- *
- * 1) Sends SCAN_START notification to driver
- * 2) Checks to see if it has time to do scan for one channel
- * 3) Sends NULL packet, with power-save (PS) bit set to 1,
- * to tell AP that we're going off-channel
- * 4) Tunes to first channel in scan list, does active or passive scan
- * 5) Sends SCAN_RESULT notification to driver
- * 6) Checks to see if it has time to do scan on *next* channel in list
- * 7) Repeats 4-6 until it no longer has time to scan the next channel
- * before max_out_time expires
- * 8) Returns to service channel
- * 9) Sends NULL packet with PS=0 to tell AP that we're back
- * 10) Stays on service channel until suspend_time expires
- * 11) Repeats entire process 2-10 until list is complete
- * 12) Sends SCAN_COMPLETE notification
- *
- * For fast, efficient scans, the scan command also has support for staying on
- * a channel for just a short time, if doing active scanning and getting no
- * responses to the transmitted probe request. This time is controlled by
- * quiet_time, and the number of received packets below which a channel is
- * considered "quiet" is controlled by quiet_plcp_threshold.
- *
- * For active scanning on channels that have regulatory restrictions against
- * blindly transmitting, the scan can listen before transmitting, to make sure
- * that there is already legitimate activity on the channel. If enough
- * packets are cleanly received on the channel (controlled by good_CRC_th,
- * typical value 1), the scan engine starts transmitting probe requests.
- *
- * Driver must use separate scan commands for 2.4 vs. 5 GHz bands.
- *
- * To avoid uCode errors, see timing restrictions described under
- * struct il_scan_channel.
- */
-
-struct il3945_scan_cmd {
- __le16 len;
- u8 reserved0;
- u8 channel_count; /* # channels in channel list */
- __le16 quiet_time; /* dwell only this # millisecs on quiet channel
- * (only for active scan) */
- __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */
- __le16 good_CRC_th; /* passive -> active promotion threshold */
- __le16 reserved1;
- __le32 max_out_time; /* max usec to be away from associated (service)
- * channel */
- __le32 suspend_time; /* pause scan this long (in "extended beacon
- * format") when returning to service channel:
- * 3945; 31:24 # beacons, 19:0 additional usec,
- * 4965; 31:22 # beacons, 21:0 additional usec.
- */
- __le32 flags; /* RXON_FLG_* */
- __le32 filter_flags; /* RXON_FILTER_* */
-
- /* For active scans (set to all-0s for passive scans).
- * Does not include payload. Must specify Tx rate; no rate scaling. */
- struct il3945_tx_cmd tx_cmd;
-
- /* For directed active scans (set to all-0s otherwise) */
- struct il_ssid_ie direct_scan[PROBE_OPTION_MAX_3945];
-
- /*
- * Probe request frame, followed by channel list.
- *
- * Size of probe request frame is specified by byte count in tx_cmd.
- * Channel list follows immediately after probe request frame.
- * Number of channels in list is specified by channel_count.
- * Each channel in list is of type:
- *
- * struct il3945_scan_channel channels[0];
- *
- * NOTE: Only one band of channels can be scanned per pass. You
- * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
- * for one scan to complete (i.e. receive N_SCAN_COMPLETE)
- * before requesting another scan.
- */
- u8 data[0];
-} __packed;
-
-struct il_scan_cmd {
- __le16 len;
- u8 reserved0;
- u8 channel_count; /* # channels in channel list */
- __le16 quiet_time; /* dwell only this # millisecs on quiet channel
- * (only for active scan) */
- __le16 quiet_plcp_th; /* quiet chnl is < this # pkts (typ. 1) */
- __le16 good_CRC_th; /* passive -> active promotion threshold */
- __le16 rx_chain; /* RXON_RX_CHAIN_* */
- __le32 max_out_time; /* max usec to be away from associated (service)
- * channel */
- __le32 suspend_time; /* pause scan this long (in "extended beacon
- * format") when returning to service chnl:
- * 3945; 31:24 # beacons, 19:0 additional usec,
- * 4965; 31:22 # beacons, 21:0 additional usec.
- */
- __le32 flags; /* RXON_FLG_* */
- __le32 filter_flags; /* RXON_FILTER_* */
-
- /* For active scans (set to all-0s for passive scans).
- * Does not include payload. Must specify Tx rate; no rate scaling. */
- struct il_tx_cmd tx_cmd;
-
- /* For directed active scans (set to all-0s otherwise) */
- struct il_ssid_ie direct_scan[PROBE_OPTION_MAX];
-
- /*
- * Probe request frame, followed by channel list.
- *
- * Size of probe request frame is specified by byte count in tx_cmd.
- * Channel list follows immediately after probe request frame.
- * Number of channels in list is specified by channel_count.
- * Each channel in list is of type:
- *
- * struct il_scan_channel channels[0];
- *
- * NOTE: Only one band of channels can be scanned per pass. You
- * must not mix 2.4GHz channels and 5.2GHz channels, and you must wait
- * for one scan to complete (i.e. receive N_SCAN_COMPLETE)
- * before requesting another scan.
- */
- u8 data[0];
-} __packed;
-
-/* Can abort will notify by complete notification with abort status. */
-#define CAN_ABORT_STATUS cpu_to_le32(0x1)
-/* complete notification statuses */
-#define ABORT_STATUS 0x2
-
-/*
- * C_SCAN = 0x80 (response)
- */
-struct il_scanreq_notification {
- __le32 status; /* 1: okay, 2: cannot fulfill request */
-} __packed;
-
-/*
- * N_SCAN_START = 0x82 (notification only, not a command)
- */
-struct il_scanstart_notification {
- __le32 tsf_low;
- __le32 tsf_high;
- __le32 beacon_timer;
- u8 channel;
- u8 band;
- u8 reserved[2];
- __le32 status;
-} __packed;
-
-#define SCAN_OWNER_STATUS 0x1
-#define MEASURE_OWNER_STATUS 0x2
-
-#define IL_PROBE_STATUS_OK 0
-#define IL_PROBE_STATUS_TX_FAILED BIT(0)
-/* error statuses combined with TX_FAILED */
-#define IL_PROBE_STATUS_FAIL_TTL BIT(1)
-#define IL_PROBE_STATUS_FAIL_BT BIT(2)
-
-#define NUMBER_OF_STATS 1 /* first __le32 is good CRC */
-/*
- * N_SCAN_RESULTS = 0x83 (notification only, not a command)
- */
-struct il_scanresults_notification {
- u8 channel;
- u8 band;
- u8 probe_status;
- u8 num_probe_not_sent; /* not enough time to send */
- __le32 tsf_low;
- __le32 tsf_high;
- __le32 stats[NUMBER_OF_STATS];
-} __packed;
-
-/*
- * N_SCAN_COMPLETE = 0x84 (notification only, not a command)
- */
-struct il_scancomplete_notification {
- u8 scanned_channels;
- u8 status;
- u8 last_channel;
- __le32 tsf_low;
- __le32 tsf_high;
-} __packed;
-
-
-/******************************************************************************
- * (9)
- * IBSS/AP Commands and Notifications:
- *
- *****************************************************************************/
-
-enum il_ibss_manager {
- IL_NOT_IBSS_MANAGER = 0,
- IL_IBSS_MANAGER = 1,
-};
-
-/*
- * N_BEACON = 0x90 (notification only, not a command)
- */
-
-struct il3945_beacon_notif {
- struct il3945_tx_resp beacon_notify_hdr;
- __le32 low_tsf;
- __le32 high_tsf;
- __le32 ibss_mgr_status;
-} __packed;
-
-struct il4965_beacon_notif {
- struct il4965_tx_resp beacon_notify_hdr;
- __le32 low_tsf;
- __le32 high_tsf;
- __le32 ibss_mgr_status;
-} __packed;
-
-/*
- * C_TX_BEACON= 0x91 (command, has simple generic response)
- */
-
-struct il3945_tx_beacon_cmd {
- struct il3945_tx_cmd tx;
- __le16 tim_idx;
- u8 tim_size;
- u8 reserved1;
- struct ieee80211_hdr frame[0]; /* beacon frame */
-} __packed;
-
-struct il_tx_beacon_cmd {
- struct il_tx_cmd tx;
- __le16 tim_idx;
- u8 tim_size;
- u8 reserved1;
- struct ieee80211_hdr frame[0]; /* beacon frame */
-} __packed;
-
-/******************************************************************************
- * (10)
- * Statistics Commands and Notifications:
- *
- *****************************************************************************/
-
-#define IL_TEMP_CONVERT 260
-
-#define SUP_RATE_11A_MAX_NUM_CHANNELS 8
-#define SUP_RATE_11B_MAX_NUM_CHANNELS 4
-#define SUP_RATE_11G_MAX_NUM_CHANNELS 12
-
-/* Used for passing to driver number of successes and failures per rate */
-struct rate_histogram {
- union {
- __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS];
- __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS];
- __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS];
- } success;
- union {
- __le32 a[SUP_RATE_11A_MAX_NUM_CHANNELS];
- __le32 b[SUP_RATE_11B_MAX_NUM_CHANNELS];
- __le32 g[SUP_RATE_11G_MAX_NUM_CHANNELS];
- } failed;
-} __packed;
-
-/* stats command response */
-
-struct iwl39_stats_rx_phy {
- __le32 ina_cnt;
- __le32 fina_cnt;
- __le32 plcp_err;
- __le32 crc32_err;
- __le32 overrun_err;
- __le32 early_overrun_err;
- __le32 crc32_good;
- __le32 false_alarm_cnt;
- __le32 fina_sync_err_cnt;
- __le32 sfd_timeout;
- __le32 fina_timeout;
- __le32 unresponded_rts;
- __le32 rxe_frame_limit_overrun;
- __le32 sent_ack_cnt;
- __le32 sent_cts_cnt;
-} __packed;
-
-struct iwl39_stats_rx_non_phy {
- __le32 bogus_cts; /* CTS received when not expecting CTS */
- __le32 bogus_ack; /* ACK received when not expecting ACK */
- __le32 non_bssid_frames; /* number of frames with BSSID that
- * doesn't belong to the STA BSSID */
- __le32 filtered_frames; /* count frames that were dumped in the
- * filtering process */
- __le32 non_channel_beacons; /* beacons with our bss id but not on
- * our serving channel */
-} __packed;
-
-struct iwl39_stats_rx {
- struct iwl39_stats_rx_phy ofdm;
- struct iwl39_stats_rx_phy cck;
- struct iwl39_stats_rx_non_phy general;
-} __packed;
-
-struct iwl39_stats_tx {
- __le32 preamble_cnt;
- __le32 rx_detected_cnt;
- __le32 bt_prio_defer_cnt;
- __le32 bt_prio_kill_cnt;
- __le32 few_bytes_cnt;
- __le32 cts_timeout;
- __le32 ack_timeout;
- __le32 expected_ack_cnt;
- __le32 actual_ack_cnt;
-} __packed;
-
-struct stats_dbg {
- __le32 burst_check;
- __le32 burst_count;
- __le32 wait_for_silence_timeout_cnt;
- __le32 reserved[3];
-} __packed;
-
-struct iwl39_stats_div {
- __le32 tx_on_a;
- __le32 tx_on_b;
- __le32 exec_time;
- __le32 probe_time;
-} __packed;
-
-struct iwl39_stats_general {
- __le32 temperature;
- struct stats_dbg dbg;
- __le32 sleep_time;
- __le32 slots_out;
- __le32 slots_idle;
- __le32 ttl_timestamp;
- struct iwl39_stats_div div;
-} __packed;
-
-struct stats_rx_phy {
- __le32 ina_cnt;
- __le32 fina_cnt;
- __le32 plcp_err;
- __le32 crc32_err;
- __le32 overrun_err;
- __le32 early_overrun_err;
- __le32 crc32_good;
- __le32 false_alarm_cnt;
- __le32 fina_sync_err_cnt;
- __le32 sfd_timeout;
- __le32 fina_timeout;
- __le32 unresponded_rts;
- __le32 rxe_frame_limit_overrun;
- __le32 sent_ack_cnt;
- __le32 sent_cts_cnt;
- __le32 sent_ba_rsp_cnt;
- __le32 dsp_self_kill;
- __le32 mh_format_err;
- __le32 re_acq_main_rssi_sum;
- __le32 reserved3;
-} __packed;
-
-struct stats_rx_ht_phy {
- __le32 plcp_err;
- __le32 overrun_err;
- __le32 early_overrun_err;
- __le32 crc32_good;
- __le32 crc32_err;
- __le32 mh_format_err;
- __le32 agg_crc32_good;
- __le32 agg_mpdu_cnt;
- __le32 agg_cnt;
- __le32 unsupport_mcs;
-} __packed;
-
-#define INTERFERENCE_DATA_AVAILABLE cpu_to_le32(1)
-
-struct stats_rx_non_phy {
- __le32 bogus_cts; /* CTS received when not expecting CTS */
- __le32 bogus_ack; /* ACK received when not expecting ACK */
- __le32 non_bssid_frames; /* number of frames with BSSID that
- * doesn't belong to the STA BSSID */
- __le32 filtered_frames; /* count frames that were dumped in the
- * filtering process */
- __le32 non_channel_beacons; /* beacons with our bss id but not on
- * our serving channel */
- __le32 channel_beacons; /* beacons with our bss id and in our
- * serving channel */
- __le32 num_missed_bcon; /* number of missed beacons */
- __le32 adc_rx_saturation_time; /* count in 0.8us units the time the
- * ADC was in saturation */
- __le32 ina_detection_search_time;/* total time (in 0.8us) searched
- * for INA */
- __le32 beacon_silence_rssi_a; /* RSSI silence after beacon frame */
- __le32 beacon_silence_rssi_b; /* RSSI silence after beacon frame */
- __le32 beacon_silence_rssi_c; /* RSSI silence after beacon frame */
- __le32 interference_data_flag; /* flag for interference data
- * availability. 1 when data is
- * available. */
- __le32 channel_load; /* counts RX Enable time in uSec */
- __le32 dsp_false_alarms; /* DSP false alarm (both OFDM
- * and CCK) counter */
- __le32 beacon_rssi_a;
- __le32 beacon_rssi_b;
- __le32 beacon_rssi_c;
- __le32 beacon_energy_a;
- __le32 beacon_energy_b;
- __le32 beacon_energy_c;
-} __packed;
-
-struct stats_rx {
- struct stats_rx_phy ofdm;
- struct stats_rx_phy cck;
- struct stats_rx_non_phy general;
- struct stats_rx_ht_phy ofdm_ht;
-} __packed;
-
-/**
- * struct stats_tx_power - current tx power
- *
- * @ant_a: current tx power on chain a in 1/2 dB step
- * @ant_b: current tx power on chain b in 1/2 dB step
- * @ant_c: current tx power on chain c in 1/2 dB step
- */
-struct stats_tx_power {
- u8 ant_a;
- u8 ant_b;
- u8 ant_c;
- u8 reserved;
-} __packed;
-
-struct stats_tx_non_phy_agg {
- __le32 ba_timeout;
- __le32 ba_reschedule_frames;
- __le32 scd_query_agg_frame_cnt;
- __le32 scd_query_no_agg;
- __le32 scd_query_agg;
- __le32 scd_query_mismatch;
- __le32 frame_not_ready;
- __le32 underrun;
- __le32 bt_prio_kill;
- __le32 rx_ba_rsp_cnt;
-} __packed;
-
-struct stats_tx {
- __le32 preamble_cnt;
- __le32 rx_detected_cnt;
- __le32 bt_prio_defer_cnt;
- __le32 bt_prio_kill_cnt;
- __le32 few_bytes_cnt;
- __le32 cts_timeout;
- __le32 ack_timeout;
- __le32 expected_ack_cnt;
- __le32 actual_ack_cnt;
- __le32 dump_msdu_cnt;
- __le32 burst_abort_next_frame_mismatch_cnt;
- __le32 burst_abort_missing_next_frame_cnt;
- __le32 cts_timeout_collision;
- __le32 ack_or_ba_timeout_collision;
- struct stats_tx_non_phy_agg agg;
-
- __le32 reserved1;
-} __packed;
-
-
-struct stats_div {
- __le32 tx_on_a;
- __le32 tx_on_b;
- __le32 exec_time;
- __le32 probe_time;
- __le32 reserved1;
- __le32 reserved2;
-} __packed;
-
-struct stats_general_common {
- __le32 temperature; /* radio temperature */
- struct stats_dbg dbg;
- __le32 sleep_time;
- __le32 slots_out;
- __le32 slots_idle;
- __le32 ttl_timestamp;
- struct stats_div div;
- __le32 rx_enable_counter;
- /*
- * num_of_sos_states:
- * count the number of times we have to re-tune
- * in order to get out of bad PHY status
- */
- __le32 num_of_sos_states;
-} __packed;
-
-struct stats_general {
- struct stats_general_common common;
- __le32 reserved2;
- __le32 reserved3;
-} __packed;
-
-#define UCODE_STATS_CLEAR_MSK (0x1 << 0)
-#define UCODE_STATS_FREQUENCY_MSK (0x1 << 1)
-#define UCODE_STATS_NARROW_BAND_MSK (0x1 << 2)
-
-/*
- * C_STATS = 0x9c,
- * all devices identical.
- *
- * This command triggers an immediate response containing uCode stats.
- * The response is in the same format as N_STATS 0x9d, below.
- *
- * If the CLEAR_STATS configuration flag is set, uCode will clear its
- * internal copy of the stats (counters) after issuing the response.
- * This flag does not affect N_STATSs after beacons (see below).
- *
- * If the DISABLE_NOTIF configuration flag is set, uCode will not issue
- * N_STATSs after received beacons (see below). This flag
- * does not affect the response to the C_STATS 0x9c itself.
- */
-#define IL_STATS_CONF_CLEAR_STATS cpu_to_le32(0x1) /* see above */
-#define IL_STATS_CONF_DISABLE_NOTIF cpu_to_le32(0x2)/* see above */
-struct il_stats_cmd {
- __le32 configuration_flags; /* IL_STATS_CONF_* */
-} __packed;
-
-/*
- * N_STATS = 0x9d (notification only, not a command)
- *
- * By default, uCode issues this notification after receiving a beacon
- * while associated. To disable this behavior, set DISABLE_NOTIF flag in the
- * C_STATS 0x9c, above.
- *
- * Statistics counters continue to increment beacon after beacon, but are
- * cleared when changing channels or when driver issues C_STATS
- * 0x9c with CLEAR_STATS bit set (see above).
- *
- * uCode also issues this notification during scans. uCode clears stats
- * appropriately so that each notification contains stats for only the
- * one channel that has just been scanned.
- */
-#define STATS_REPLY_FLG_BAND_24G_MSK cpu_to_le32(0x2)
-#define STATS_REPLY_FLG_HT40_MODE_MSK cpu_to_le32(0x8)
-
-struct il3945_notif_stats {
- __le32 flag;
- struct iwl39_stats_rx rx;
- struct iwl39_stats_tx tx;
- struct iwl39_stats_general general;
-} __packed;
-
-struct il_notif_stats {
- __le32 flag;
- struct stats_rx rx;
- struct stats_tx tx;
- struct stats_general general;
-} __packed;
-
-/*
- * N_MISSED_BEACONS = 0xa2 (notification only, not a command)
- *
- * uCode send N_MISSED_BEACONS to driver when detect beacon missed
- * in regardless of how many missed beacons, which mean when driver receive the
- * notification, inside the command, it can find all the beacons information
- * which include number of total missed beacons, number of consecutive missed
- * beacons, number of beacons received and number of beacons expected to
- * receive.
- *
- * If uCode detected consecutive_missed_beacons > 5, it will reset the radio
- * in order to bring the radio/PHY back to working state; which has no relation
- * to when driver will perform sensitivity calibration.
- *
- * Driver should set it own missed_beacon_threshold to decide when to perform
- * sensitivity calibration based on number of consecutive missed beacons in
- * order to improve overall performance, especially in noisy environment.
- *
- */
-
-#define IL_MISSED_BEACON_THRESHOLD_MIN (1)
-#define IL_MISSED_BEACON_THRESHOLD_DEF (5)
-#define IL_MISSED_BEACON_THRESHOLD_MAX IL_MISSED_BEACON_THRESHOLD_DEF
-
-struct il_missed_beacon_notif {
- __le32 consecutive_missed_beacons;
- __le32 total_missed_becons;
- __le32 num_expected_beacons;
- __le32 num_recvd_beacons;
-} __packed;
-
-
-/******************************************************************************
- * (11)
- * Rx Calibration Commands:
- *
- * With the uCode used for open source drivers, most Tx calibration (except
- * for Tx Power) and most Rx calibration is done by uCode during the
- * "initialize" phase of uCode boot. Driver must calibrate only:
- *
- * 1) Tx power (depends on temperature), described elsewhere
- * 2) Receiver gain balance (optimize MIMO, and detect disconnected antennas)
- * 3) Receiver sensitivity (to optimize signal detection)
- *
- *****************************************************************************/
-
-/**
- * C_SENSITIVITY = 0xa8 (command, has simple generic response)
- *
- * This command sets up the Rx signal detector for a sensitivity level that
- * is high enough to lock onto all signals within the associated network,
- * but low enough to ignore signals that are below a certain threshold, so as
- * not to have too many "false alarms". False alarms are signals that the
- * Rx DSP tries to lock onto, but then discards after determining that they
- * are noise.
- *
- * The optimum number of false alarms is between 5 and 50 per 200 TUs
- * (200 * 1024 uSecs, i.e. 204.8 milliseconds) of actual Rx time (i.e.
- * time listening, not transmitting). Driver must adjust sensitivity so that
- * the ratio of actual false alarms to actual Rx time falls within this range.
- *
- * While associated, uCode delivers N_STATSs after each
- * received beacon. These provide information to the driver to analyze the
- * sensitivity. Don't analyze stats that come in from scanning, or any
- * other non-associated-network source. Pertinent stats include:
- *
- * From "general" stats (struct stats_rx_non_phy):
- *
- * (beacon_energy_[abc] & 0x0FF00) >> 8 (unsigned, higher value is lower level)
- * Measure of energy of desired signal. Used for establishing a level
- * below which the device does not detect signals.
- *
- * (beacon_silence_rssi_[abc] & 0x0FF00) >> 8 (unsigned, units in dB)
- * Measure of background noise in silent period after beacon.
- *
- * channel_load
- * uSecs of actual Rx time during beacon period (varies according to
- * how much time was spent transmitting).
- *
- * From "cck" and "ofdm" stats (struct stats_rx_phy), separately:
- *
- * false_alarm_cnt
- * Signal locks abandoned early (before phy-level header).
- *
- * plcp_err
- * Signal locks abandoned late (during phy-level header).
- *
- * NOTE: Both false_alarm_cnt and plcp_err increment monotonically from
- * beacon to beacon, i.e. each value is an accumulation of all errors
- * before and including the latest beacon. Values will wrap around to 0
- * after counting up to 2^32 - 1. Driver must differentiate vs.
- * previous beacon's values to determine # false alarms in the current
- * beacon period.
- *
- * Total number of false alarms = false_alarms + plcp_errs
- *
- * For OFDM, adjust the following table entries in struct il_sensitivity_cmd
- * (notice that the start points for OFDM are at or close to settings for
- * maximum sensitivity):
- *
- * START / MIN / MAX
- * HD_AUTO_CORR32_X1_TH_ADD_MIN_IDX 90 / 85 / 120
- * HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_IDX 170 / 170 / 210
- * HD_AUTO_CORR32_X4_TH_ADD_MIN_IDX 105 / 105 / 140
- * HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_IDX 220 / 220 / 270
- *
- * If actual rate of OFDM false alarms (+ plcp_errors) is too high
- * (greater than 50 for each 204.8 msecs listening), reduce sensitivity
- * by *adding* 1 to all 4 of the table entries above, up to the max for
- * each entry. Conversely, if false alarm rate is too low (less than 5
- * for each 204.8 msecs listening), *subtract* 1 from each entry to
- * increase sensitivity.
- *
- * For CCK sensitivity, keep track of the following:
- *
- * 1). 20-beacon history of maximum background noise, indicated by
- * (beacon_silence_rssi_[abc] & 0x0FF00), units in dB, across the
- * 3 receivers. For any given beacon, the "silence reference" is
- * the maximum of last 60 samples (20 beacons * 3 receivers).
- *
- * 2). 10-beacon history of strongest signal level, as indicated
- * by (beacon_energy_[abc] & 0x0FF00) >> 8, across the 3 receivers,
- * i.e. the strength of the signal through the best receiver at the
- * moment. These measurements are "upside down", with lower values
- * for stronger signals, so max energy will be *minimum* value.
- *
- * Then for any given beacon, the driver must determine the *weakest*
- * of the strongest signals; this is the minimum level that needs to be
- * successfully detected, when using the best receiver at the moment.
- * "Max cck energy" is the maximum (higher value means lower energy!)
- * of the last 10 minima. Once this is determined, driver must add
- * a little margin by adding "6" to it.
- *
- * 3). Number of consecutive beacon periods with too few false alarms.
- * Reset this to 0 at the first beacon period that falls within the
- * "good" range (5 to 50 false alarms per 204.8 milliseconds rx).
- *
- * Then, adjust the following CCK table entries in struct il_sensitivity_cmd
- * (notice that the start points for CCK are at maximum sensitivity):
- *
- * START / MIN / MAX
- * HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX 125 / 125 / 200
- * HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX 200 / 200 / 400
- * HD_MIN_ENERGY_CCK_DET_IDX 100 / 0 / 100
- *
- * If actual rate of CCK false alarms (+ plcp_errors) is too high
- * (greater than 50 for each 204.8 msecs listening), method for reducing
- * sensitivity is:
- *
- * 1) *Add* 3 to value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX,
- * up to max 400.
- *
- * 2) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX is < 160,
- * sensitivity has been reduced a significant amount; bring it up to
- * a moderate 161. Otherwise, *add* 3, up to max 200.
- *
- * 3) a) If current value in HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX is > 160,
- * sensitivity has been reduced only a moderate or small amount;
- * *subtract* 2 from value in HD_MIN_ENERGY_CCK_DET_IDX,
- * down to min 0. Otherwise (if gain has been significantly reduced),
- * don't change the HD_MIN_ENERGY_CCK_DET_IDX value.
- *
- * b) Save a snapshot of the "silence reference".
- *
- * If actual rate of CCK false alarms (+ plcp_errors) is too low
- * (less than 5 for each 204.8 msecs listening), method for increasing
- * sensitivity is used only if:
- *
- * 1a) Previous beacon did not have too many false alarms
- * 1b) AND difference between previous "silence reference" and current
- * "silence reference" (prev - current) is 2 or more,
- * OR 2) 100 or more consecutive beacon periods have had rate of
- * less than 5 false alarms per 204.8 milliseconds rx time.
- *
- * Method for increasing sensitivity:
- *
- * 1) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX,
- * down to min 125.
- *
- * 2) *Subtract* 3 from value in HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX,
- * down to min 200.
- *
- * 3) *Add* 2 to value in HD_MIN_ENERGY_CCK_DET_IDX, up to max 100.
- *
- * If actual rate of CCK false alarms (+ plcp_errors) is within good range
- * (between 5 and 50 for each 204.8 msecs listening):
- *
- * 1) Save a snapshot of the silence reference.
- *
- * 2) If previous beacon had too many CCK false alarms (+ plcp_errors),
- * give some extra margin to energy threshold by *subtracting* 8
- * from value in HD_MIN_ENERGY_CCK_DET_IDX.
- *
- * For all cases (too few, too many, good range), make sure that the CCK
- * detection threshold (energy) is below the energy level for robust
- * detection over the past 10 beacon periods, the "Max cck energy".
- * Lower values mean higher energy; this means making sure that the value
- * in HD_MIN_ENERGY_CCK_DET_IDX is at or *above* "Max cck energy".
- *
- */
-
-/*
- * Table entries in C_SENSITIVITY (struct il_sensitivity_cmd)
- */
-#define HD_TBL_SIZE (11) /* number of entries */
-#define HD_MIN_ENERGY_CCK_DET_IDX (0) /* table idxes */
-#define HD_MIN_ENERGY_OFDM_DET_IDX (1)
-#define HD_AUTO_CORR32_X1_TH_ADD_MIN_IDX (2)
-#define HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_IDX (3)
-#define HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX (4)
-#define HD_AUTO_CORR32_X4_TH_ADD_MIN_IDX (5)
-#define HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_IDX (6)
-#define HD_BARKER_CORR_TH_ADD_MIN_IDX (7)
-#define HD_BARKER_CORR_TH_ADD_MIN_MRC_IDX (8)
-#define HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX (9)
-#define HD_OFDM_ENERGY_TH_IN_IDX (10)
-
-/* Control field in struct il_sensitivity_cmd */
-#define C_SENSITIVITY_CONTROL_DEFAULT_TBL cpu_to_le16(0)
-#define C_SENSITIVITY_CONTROL_WORK_TBL cpu_to_le16(1)
-
-/**
- * struct il_sensitivity_cmd
- * @control: (1) updates working table, (0) updates default table
- * @table: energy threshold values, use HD_* as idx into table
- *
- * Always use "1" in "control" to update uCode's working table and DSP.
- */
-struct il_sensitivity_cmd {
- __le16 control; /* always use "1" */
- __le16 table[HD_TBL_SIZE]; /* use HD_* as idx */
-} __packed;
-
-
-/**
- * C_PHY_CALIBRATION = 0xb0 (command, has simple generic response)
- *
- * This command sets the relative gains of 4965 device's 3 radio receiver chains.
- *
- * After the first association, driver should accumulate signal and noise
- * stats from the N_STATSs that follow the first 20
- * beacons from the associated network (don't collect stats that come
- * in from scanning, or any other non-network source).
- *
- * DISCONNECTED ANTENNA:
- *
- * Driver should determine which antennas are actually connected, by comparing
- * average beacon signal levels for the 3 Rx chains. Accumulate (add) the
- * following values over 20 beacons, one accumulator for each of the chains
- * a/b/c, from struct stats_rx_non_phy:
- *
- * beacon_rssi_[abc] & 0x0FF (unsigned, units in dB)
- *
- * Find the strongest signal from among a/b/c. Compare the other two to the
- * strongest. If any signal is more than 15 dB (times 20, unless you
- * divide the accumulated values by 20) below the strongest, the driver
- * considers that antenna to be disconnected, and should not try to use that
- * antenna/chain for Rx or Tx. If both A and B seem to be disconnected,
- * driver should declare the stronger one as connected, and attempt to use it
- * (A and B are the only 2 Tx chains!).
- *
- *
- * RX BALANCE:
- *
- * Driver should balance the 3 receivers (but just the ones that are connected
- * to antennas, see above) for gain, by comparing the average signal levels
- * detected during the silence after each beacon (background noise).
- * Accumulate (add) the following values over 20 beacons, one accumulator for
- * each of the chains a/b/c, from struct stats_rx_non_phy:
- *
- * beacon_silence_rssi_[abc] & 0x0FF (unsigned, units in dB)
- *
- * Find the weakest background noise level from among a/b/c. This Rx chain
- * will be the reference, with 0 gain adjustment. Attenuate other channels by
- * finding noise difference:
- *
- * (accum_noise[i] - accum_noise[reference]) / 30
- *
- * The "30" adjusts the dB in the 20 accumulated samples to units of 1.5 dB.
- * For use in diff_gain_[abc] fields of struct il_calibration_cmd, the
- * driver should limit the difference results to a range of 0-3 (0-4.5 dB),
- * and set bit 2 to indicate "reduce gain". The value for the reference
- * (weakest) chain should be "0".
- *
- * diff_gain_[abc] bit fields:
- * 2: (1) reduce gain, (0) increase gain
- * 1-0: amount of gain, units of 1.5 dB
- */
-
-/* Phy calibration command for series */
-/* The default calibrate table size if not specified by firmware */
-#define IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18
-enum {
- IL_PHY_CALIBRATE_DIFF_GAIN_CMD = 7,
- IL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE = 19,
-};
-
-#define IL_MAX_PHY_CALIBRATE_TBL_SIZE (253)
-
-struct il_calib_hdr {
- u8 op_code;
- u8 first_group;
- u8 groups_num;
- u8 data_valid;
-} __packed;
-
-/* IL_PHY_CALIBRATE_DIFF_GAIN_CMD (7) */
-struct il_calib_diff_gain_cmd {
- struct il_calib_hdr hdr;
- s8 diff_gain_a; /* see above */
- s8 diff_gain_b;
- s8 diff_gain_c;
- u8 reserved1;
-} __packed;
-
-/******************************************************************************
- * (12)
- * Miscellaneous Commands:
- *
- *****************************************************************************/
-
-/*
- * LEDs Command & Response
- * C_LEDS = 0x48 (command, has simple generic response)
- *
- * For each of 3 possible LEDs (Activity/Link/Tech, selected by "id" field),
- * this command turns it on or off, or sets up a periodic blinking cycle.
- */
-struct il_led_cmd {
- __le32 interval; /* "interval" in uSec */
- u8 id; /* 1: Activity, 2: Link, 3: Tech */
- u8 off; /* # intervals off while blinking;
- * "0", with >0 "on" value, turns LED on */
- u8 on; /* # intervals on while blinking;
- * "0", regardless of "off", turns LED off */
- u8 reserved;
-} __packed;
-
-
-/******************************************************************************
- * (13)
- * Union of all expected notifications/responses:
- *
- *****************************************************************************/
-
-struct il_rx_pkt {
- /*
- * The first 4 bytes of the RX frame header contain both the RX frame
- * size and some flags.
- * Bit fields:
- * 31: flag flush RB request
- * 30: flag ignore TC (terminal counter) request
- * 29: flag fast IRQ request
- * 28-14: Reserved
- * 13-00: RX frame size
- */
- __le32 len_n_flags;
- struct il_cmd_header hdr;
- union {
- struct il3945_rx_frame rx_frame;
- struct il3945_tx_resp tx_resp;
- struct il3945_beacon_notif beacon_status;
-
- struct il_alive_resp alive_frame;
- struct il_spectrum_notification spectrum_notif;
- struct il_csa_notification csa_notif;
- struct il_error_resp err_resp;
- struct il_card_state_notif card_state_notif;
- struct il_add_sta_resp add_sta;
- struct il_rem_sta_resp rem_sta;
- struct il_sleep_notification sleep_notif;
- struct il_spectrum_resp spectrum;
- struct il_notif_stats stats;
- struct il_compressed_ba_resp compressed_ba;
- struct il_missed_beacon_notif missed_beacon;
- __le32 status;
- u8 raw[0];
- } u;
-} __packed;
-
-#endif /* __il_commands_h__ */
diff --git a/drivers/net/wireless/iwlegacy/iwl-dev.h b/drivers/net/wireless/iwlegacy/iwl-dev.h
index 2ebd807..991b455 100644
--- a/drivers/net/wireless/iwlegacy/iwl-dev.h
+++ b/drivers/net/wireless/iwlegacy/iwl-dev.h
@@ -25,7 +25,7 @@
*****************************************************************************/
/*
* Please use this file (iwl-dev.h) for driver implementation definitions.
- * Please use iwl-commands.h for uCode API definitions.
+ * Please use commands.h for uCode API definitions.
* Please use 4965.h for hardware-related definitions.
*/
@@ -42,7 +42,6 @@
#include "iwl-eeprom.h"
#include "iwl-csr.h"
#include "iwl-prph.h"
-#include "iwl-fh.h"
#include "iwl-debug.h"
#include "4965.h"
#include "iwl-led.h"
diff --git a/drivers/net/wireless/iwlegacy/iwl-power.h b/drivers/net/wireless/iwlegacy/iwl-power.h
index e4a0ef2..c0ae3fa 100644
--- a/drivers/net/wireless/iwlegacy/iwl-power.h
+++ b/drivers/net/wireless/iwlegacy/iwl-power.h
@@ -28,7 +28,7 @@
#ifndef __il_power_setting_h__
#define __il_power_setting_h__
-#include "iwl-commands.h"
+#include "commands.h"
enum il_power_level {
IL_POWER_IDX_1,
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
