Merge iwl-{tx,rx,sta,scan,power,eeprom,led,hcmd}.c into common.c .
Signed-off-by: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
---
drivers/net/wireless/iwlegacy/Makefile | 4 +-
drivers/net/wireless/iwlegacy/common.c | 3146 ++++++++++++++++++++++++++++
drivers/net/wireless/iwlegacy/iwl-eeprom.c | 553 -----
drivers/net/wireless/iwlegacy/iwl-hcmd.c | 271 ---
drivers/net/wireless/iwlegacy/iwl-led.c | 205 --
drivers/net/wireless/iwlegacy/iwl-power.c | 165 --
drivers/net/wireless/iwlegacy/iwl-rx.c | 281 ---
drivers/net/wireless/iwlegacy/iwl-scan.c | 545 -----
drivers/net/wireless/iwlegacy/iwl-tx.c | 655 ------
9 files changed, 3147 insertions(+), 2678 deletions(-)
delete mode 100644 drivers/net/wireless/iwlegacy/iwl-eeprom.c
delete mode 100644 drivers/net/wireless/iwlegacy/iwl-hcmd.c
delete mode 100644 drivers/net/wireless/iwlegacy/iwl-led.c
delete mode 100644 drivers/net/wireless/iwlegacy/iwl-power.c
delete mode 100644 drivers/net/wireless/iwlegacy/iwl-rx.c
delete mode 100644 drivers/net/wireless/iwlegacy/iwl-scan.c
delete mode 100644 drivers/net/wireless/iwlegacy/iwl-tx.c
diff --git a/drivers/net/wireless/iwlegacy/Makefile b/drivers/net/wireless/iwlegacy/Makefile
index 0f51f9d..413213b 100644
--- a/drivers/net/wireless/iwlegacy/Makefile
+++ b/drivers/net/wireless/iwlegacy/Makefile
@@ -1,7 +1,5 @@
obj-$(CONFIG_IWLEGACY) += iwl-legacy.o
-iwl-legacy-objs := common.o iwl-eeprom.o iwl-hcmd.o iwl-power.o
-iwl-legacy-objs += iwl-rx.o iwl-tx.o iwl-sta.o
-iwl-legacy-objs += iwl-scan.o iwl-led.o
+iwl-legacy-objs := common.o
iwl-legacy-$(CONFIG_IWLEGACY_DEBUGFS) += iwl-debugfs.o
iwl-legacy-objs += $(iwl-legacy-m)
diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c
index 856a321..7062574 100644
--- a/drivers/net/wireless/iwlegacy/common.c
+++ b/drivers/net/wireless/iwlegacy/common.c
@@ -31,6 +31,13 @@
#include <linux/etherdevice.h>
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/lockdep.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
@@ -42,6 +49,3145 @@
#include "iwl-sta.h"
#include "iwl-helpers.h"
+const char *il_get_cmd_string(u8 cmd)
+{
+ switch (cmd) {
+ IL_CMD(N_ALIVE);
+ IL_CMD(N_ERROR);
+ IL_CMD(C_RXON);
+ IL_CMD(C_RXON_ASSOC);
+ IL_CMD(C_QOS_PARAM);
+ IL_CMD(C_RXON_TIMING);
+ IL_CMD(C_ADD_STA);
+ IL_CMD(C_REM_STA);
+ IL_CMD(C_WEPKEY);
+ IL_CMD(N_3945_RX);
+ IL_CMD(C_TX);
+ IL_CMD(C_RATE_SCALE);
+ IL_CMD(C_LEDS);
+ IL_CMD(C_TX_LINK_QUALITY_CMD);
+ IL_CMD(C_CHANNEL_SWITCH);
+ IL_CMD(N_CHANNEL_SWITCH);
+ IL_CMD(C_SPECTRUM_MEASUREMENT);
+ IL_CMD(N_SPECTRUM_MEASUREMENT);
+ IL_CMD(C_POWER_TBL);
+ IL_CMD(N_PM_SLEEP);
+ IL_CMD(N_PM_DEBUG_STATS);
+ IL_CMD(C_SCAN);
+ IL_CMD(C_SCAN_ABORT);
+ IL_CMD(N_SCAN_START);
+ IL_CMD(N_SCAN_RESULTS);
+ IL_CMD(N_SCAN_COMPLETE);
+ IL_CMD(N_BEACON);
+ IL_CMD(C_TX_BEACON);
+ IL_CMD(C_TX_PWR_TBL);
+ IL_CMD(C_BT_CONFIG);
+ IL_CMD(C_STATS);
+ IL_CMD(N_STATS);
+ IL_CMD(N_CARD_STATE);
+ IL_CMD(N_MISSED_BEACONS);
+ IL_CMD(C_CT_KILL_CONFIG);
+ IL_CMD(C_SENSITIVITY);
+ IL_CMD(C_PHY_CALIBRATION);
+ IL_CMD(N_RX_PHY);
+ IL_CMD(N_RX_MPDU);
+ IL_CMD(N_RX);
+ IL_CMD(N_COMPRESSED_BA);
+ default:
+ return "UNKNOWN";
+
+ }
+}
+EXPORT_SYMBOL(il_get_cmd_string);
+
+#define HOST_COMPLETE_TIMEOUT (HZ / 2)
+
+static void il_generic_cmd_callback(struct il_priv *il,
+ struct il_device_cmd *cmd,
+ struct il_rx_pkt *pkt)
+{
+ if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
+ IL_ERR("Bad return from %s (0x%08X)\n",
+ il_get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
+ return;
+ }
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+ switch (cmd->hdr.cmd) {
+ case C_TX_LINK_QUALITY_CMD:
+ case C_SENSITIVITY:
+ D_HC_DUMP("back from %s (0x%08X)\n",
+ il_get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
+ break;
+ default:
+ D_HC("back from %s (0x%08X)\n",
+ il_get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
+ }
+#endif
+}
+
+static int
+il_send_cmd_async(struct il_priv *il, struct il_host_cmd *cmd)
+{
+ int ret;
+
+ BUG_ON(!(cmd->flags & CMD_ASYNC));
+
+ /* An asynchronous command can not expect an SKB to be set. */
+ BUG_ON(cmd->flags & CMD_WANT_SKB);
+
+ /* Assign a generic callback if one is not provided */
+ if (!cmd->callback)
+ cmd->callback = il_generic_cmd_callback;
+
+ if (test_bit(S_EXIT_PENDING, &il->status))
+ return -EBUSY;
+
+ ret = il_enqueue_hcmd(il, cmd);
+ if (ret < 0) {
+ IL_ERR("Error sending %s: enqueue_hcmd failed: %d\n",
+ il_get_cmd_string(cmd->id), ret);
+ return ret;
+ }
+ return 0;
+}
+
+int il_send_cmd_sync(struct il_priv *il, struct il_host_cmd *cmd)
+{
+ int cmd_idx;
+ int ret;
+
+ lockdep_assert_held(&il->mutex);
+
+ BUG_ON(cmd->flags & CMD_ASYNC);
+
+ /* A synchronous command can not have a callback set. */
+ BUG_ON(cmd->callback);
+
+ D_INFO("Attempting to send sync command %s\n",
+ il_get_cmd_string(cmd->id));
+
+ set_bit(S_HCMD_ACTIVE, &il->status);
+ D_INFO("Setting HCMD_ACTIVE for command %s\n",
+ il_get_cmd_string(cmd->id));
+
+ cmd_idx = il_enqueue_hcmd(il, cmd);
+ if (cmd_idx < 0) {
+ ret = cmd_idx;
+ IL_ERR("Error sending %s: enqueue_hcmd failed: %d\n",
+ il_get_cmd_string(cmd->id), ret);
+ goto out;
+ }
+
+ ret = wait_event_timeout(il->wait_command_queue,
+ !test_bit(S_HCMD_ACTIVE, &il->status),
+ HOST_COMPLETE_TIMEOUT);
+ if (!ret) {
+ if (test_bit(S_HCMD_ACTIVE, &il->status)) {
+ IL_ERR(
+ "Error sending %s: time out after %dms.\n",
+ il_get_cmd_string(cmd->id),
+ jiffies_to_msecs(HOST_COMPLETE_TIMEOUT));
+
+ clear_bit(S_HCMD_ACTIVE, &il->status);
+ D_INFO(
+ "Clearing HCMD_ACTIVE for command %s\n",
+ il_get_cmd_string(cmd->id));
+ ret = -ETIMEDOUT;
+ goto cancel;
+ }
+ }
+
+ if (test_bit(S_RF_KILL_HW, &il->status)) {
+ IL_ERR("Command %s aborted: RF KILL Switch\n",
+ il_get_cmd_string(cmd->id));
+ ret = -ECANCELED;
+ goto fail;
+ }
+ if (test_bit(S_FW_ERROR, &il->status)) {
+ IL_ERR("Command %s failed: FW Error\n",
+ il_get_cmd_string(cmd->id));
+ ret = -EIO;
+ goto fail;
+ }
+ if ((cmd->flags & CMD_WANT_SKB) && !cmd->reply_page) {
+ IL_ERR("Error: Response NULL in '%s'\n",
+ il_get_cmd_string(cmd->id));
+ ret = -EIO;
+ goto cancel;
+ }
+
+ ret = 0;
+ goto out;
+
+cancel:
+ if (cmd->flags & CMD_WANT_SKB) {
+ /*
+ * Cancel the CMD_WANT_SKB flag for the cmd in the
+ * TX cmd queue. Otherwise in case the cmd comes
+ * in later, it will possibly set an invalid
+ * address (cmd->meta.source).
+ */
+ il->txq[il->cmd_queue].meta[cmd_idx].flags &=
+ ~CMD_WANT_SKB;
+ }
+fail:
+ if (cmd->reply_page) {
+ il_free_pages(il, cmd->reply_page);
+ cmd->reply_page = 0;
+ }
+out:
+ return ret;
+}
+EXPORT_SYMBOL(il_send_cmd_sync);
+
+int il_send_cmd(struct il_priv *il, struct il_host_cmd *cmd)
+{
+ if (cmd->flags & CMD_ASYNC)
+ return il_send_cmd_async(il, cmd);
+
+ return il_send_cmd_sync(il, cmd);
+}
+EXPORT_SYMBOL(il_send_cmd);
+
+int
+il_send_cmd_pdu(struct il_priv *il, u8 id, u16 len, const void *data)
+{
+ struct il_host_cmd cmd = {
+ .id = id,
+ .len = len,
+ .data = data,
+ };
+
+ return il_send_cmd_sync(il, &cmd);
+}
+EXPORT_SYMBOL(il_send_cmd_pdu);
+
+int il_send_cmd_pdu_async(struct il_priv *il,
+ u8 id, u16 len, const void *data,
+ void (*callback)(struct il_priv *il,
+ struct il_device_cmd *cmd,
+ struct il_rx_pkt *pkt))
+{
+ struct il_host_cmd cmd = {
+ .id = id,
+ .len = len,
+ .data = data,
+ };
+
+ cmd.flags |= CMD_ASYNC;
+ cmd.callback = callback;
+
+ return il_send_cmd_async(il, &cmd);
+}
+EXPORT_SYMBOL(il_send_cmd_pdu_async);
+
+/* default: IL_LED_BLINK(0) using blinking idx table */
+static int led_mode;
+module_param(led_mode, int, S_IRUGO);
+MODULE_PARM_DESC(led_mode, "0=system default, "
+ "1=On(RF On)/Off(RF Off), 2=blinking");
+
+/* Throughput OFF time(ms) ON time (ms)
+ * >300 25 25
+ * >200 to 300 40 40
+ * >100 to 200 55 55
+ * >70 to 100 65 65
+ * >50 to 70 75 75
+ * >20 to 50 85 85
+ * >10 to 20 95 95
+ * >5 to 10 110 110
+ * >1 to 5 130 130
+ * >0 to 1 167 167
+ * <=0 SOLID ON
+ */
+static const struct ieee80211_tpt_blink il_blink[] = {
+ { .throughput = 0, .blink_time = 334 },
+ { .throughput = 1 * 1024 - 1, .blink_time = 260 },
+ { .throughput = 5 * 1024 - 1, .blink_time = 220 },
+ { .throughput = 10 * 1024 - 1, .blink_time = 190 },
+ { .throughput = 20 * 1024 - 1, .blink_time = 170 },
+ { .throughput = 50 * 1024 - 1, .blink_time = 150 },
+ { .throughput = 70 * 1024 - 1, .blink_time = 130 },
+ { .throughput = 100 * 1024 - 1, .blink_time = 110 },
+ { .throughput = 200 * 1024 - 1, .blink_time = 80 },
+ { .throughput = 300 * 1024 - 1, .blink_time = 50 },
+};
+
+/*
+ * Adjust led blink rate to compensate on a MAC Clock difference on every HW
+ * Led blink rate analysis showed an average deviation of 0% on 3945,
+ * 5% on 4965 HW.
+ * Need to compensate on the led on/off time per HW according to the deviation
+ * to achieve the desired led frequency
+ * The calculation is: (100-averageDeviation)/100 * blinkTime
+ * For code efficiency the calculation will be:
+ * compensation = (100 - averageDeviation) * 64 / 100
+ * NewBlinkTime = (compensation * BlinkTime) / 64
+ */
+static inline u8 il_blink_compensation(struct il_priv *il,
+ u8 time, u16 compensation)
+{
+ if (!compensation) {
+ IL_ERR("undefined blink compensation: "
+ "use pre-defined blinking time\n");
+ return time;
+ }
+
+ return (u8)((time * compensation) >> 6);
+}
+
+/* Set led pattern command */
+static int il_led_cmd(struct il_priv *il,
+ unsigned long on,
+ unsigned long off)
+{
+ struct il_led_cmd led_cmd = {
+ .id = IL_LED_LINK,
+ .interval = IL_DEF_LED_INTRVL
+ };
+ int ret;
+
+ if (!test_bit(S_READY, &il->status))
+ return -EBUSY;
+
+ if (il->blink_on == on && il->blink_off == off)
+ return 0;
+
+ if (off == 0) {
+ /* led is SOLID_ON */
+ on = IL_LED_SOLID;
+ }
+
+ D_LED("Led blink time compensation=%u\n",
+ il->cfg->base_params->led_compensation);
+ led_cmd.on = il_blink_compensation(il, on,
+ il->cfg->base_params->led_compensation);
+ led_cmd.off = il_blink_compensation(il, off,
+ il->cfg->base_params->led_compensation);
+
+ ret = il->cfg->ops->led->cmd(il, &led_cmd);
+ if (!ret) {
+ il->blink_on = on;
+ il->blink_off = off;
+ }
+ return ret;
+}
+
+static void il_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct il_priv *il = container_of(led_cdev, struct il_priv, led);
+ unsigned long on = 0;
+
+ if (brightness > 0)
+ on = IL_LED_SOLID;
+
+ il_led_cmd(il, on, 0);
+}
+
+static int il_led_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct il_priv *il = container_of(led_cdev, struct il_priv, led);
+
+ return il_led_cmd(il, *delay_on, *delay_off);
+}
+
+void il_leds_init(struct il_priv *il)
+{
+ int mode = led_mode;
+ int ret;
+
+ if (mode == IL_LED_DEFAULT)
+ mode = il->cfg->led_mode;
+
+ il->led.name = kasprintf(GFP_KERNEL, "%s-led",
+ wiphy_name(il->hw->wiphy));
+ il->led.brightness_set = il_led_brightness_set;
+ il->led.blink_set = il_led_blink_set;
+ il->led.max_brightness = 1;
+
+ switch (mode) {
+ case IL_LED_DEFAULT:
+ WARN_ON(1);
+ break;
+ case IL_LED_BLINK:
+ il->led.default_trigger =
+ ieee80211_create_tpt_led_trigger(il->hw,
+ IEEE80211_TPT_LEDTRIG_FL_CONNECTED,
+ il_blink, ARRAY_SIZE(il_blink));
+ break;
+ case IL_LED_RF_STATE:
+ il->led.default_trigger =
+ ieee80211_get_radio_led_name(il->hw);
+ break;
+ }
+
+ ret = led_classdev_register(&il->pci_dev->dev, &il->led);
+ if (ret) {
+ kfree(il->led.name);
+ return;
+ }
+
+ il->led_registered = true;
+}
+EXPORT_SYMBOL(il_leds_init);
+
+void il_leds_exit(struct il_priv *il)
+{
+ if (!il->led_registered)
+ return;
+
+ led_classdev_unregister(&il->led);
+ kfree(il->led.name);
+}
+EXPORT_SYMBOL(il_leds_exit);
+
+/************************** EEPROM BANDS ****************************
+ *
+ * The il_eeprom_band definitions below provide the mapping from the
+ * EEPROM contents to the specific channel number supported for each
+ * band.
+ *
+ * For example, il_priv->eeprom.band_3_channels[4] from the band_3
+ * definition below maps to physical channel 42 in the 5.2GHz spectrum.
+ * The specific geography and calibration information for that channel
+ * is contained in the eeprom map itself.
+ *
+ * During init, we copy the eeprom information and channel map
+ * information into il->channel_info_24/52 and il->channel_map_24/52
+ *
+ * channel_map_24/52 provides the idx in the channel_info array for a
+ * given channel. We have to have two separate maps as there is channel
+ * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
+ * band_2
+ *
+ * A value of 0xff stored in the channel_map indicates that the channel
+ * is not supported by the hardware at all.
+ *
+ * A value of 0xfe in the channel_map indicates that the channel is not
+ * valid for Tx with the current hardware. This means that
+ * while the system can tune and receive on a given channel, it may not
+ * be able to associate or transmit any frames on that
+ * channel. There is no corresponding channel information for that
+ * entry.
+ *
+ *********************************************************************/
+
+/* 2.4 GHz */
+const u8 il_eeprom_band_1[14] = {
+ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
+};
+
+/* 5.2 GHz bands */
+static const u8 il_eeprom_band_2[] = { /* 4915-5080MHz */
+ 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
+};
+
+static const u8 il_eeprom_band_3[] = { /* 5170-5320MHz */
+ 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
+};
+
+static const u8 il_eeprom_band_4[] = { /* 5500-5700MHz */
+ 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
+};
+
+static const u8 il_eeprom_band_5[] = { /* 5725-5825MHz */
+ 145, 149, 153, 157, 161, 165
+};
+
+static const u8 il_eeprom_band_6[] = { /* 2.4 ht40 channel */
+ 1, 2, 3, 4, 5, 6, 7
+};
+
+static const u8 il_eeprom_band_7[] = { /* 5.2 ht40 channel */
+ 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
+};
+
+/******************************************************************************
+ *
+ * EEPROM related functions
+ *
+******************************************************************************/
+
+static int il_eeprom_verify_signature(struct il_priv *il)
+{
+ u32 gp = _il_rd(il, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK;
+ int ret = 0;
+
+ D_EEPROM("EEPROM signature=0x%08x\n", gp);
+ switch (gp) {
+ case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K:
+ case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K:
+ break;
+ default:
+ IL_ERR("bad EEPROM signature,"
+ "EEPROM_GP=0x%08x\n", gp);
+ ret = -ENOENT;
+ break;
+ }
+ return ret;
+}
+
+const u8
+*il_eeprom_query_addr(const struct il_priv *il, size_t offset)
+{
+ BUG_ON(offset >= il->cfg->base_params->eeprom_size);
+ return &il->eeprom[offset];
+}
+EXPORT_SYMBOL(il_eeprom_query_addr);
+
+u16 il_eeprom_query16(const struct il_priv *il, size_t offset)
+{
+ if (!il->eeprom)
+ return 0;
+ return (u16)il->eeprom[offset] | ((u16)il->eeprom[offset + 1] << 8);
+}
+EXPORT_SYMBOL(il_eeprom_query16);
+
+/**
+ * il_eeprom_init - read EEPROM contents
+ *
+ * Load the EEPROM contents from adapter into il->eeprom
+ *
+ * NOTE: This routine uses the non-debug IO access functions.
+ */
+int il_eeprom_init(struct il_priv *il)
+{
+ __le16 *e;
+ u32 gp = _il_rd(il, CSR_EEPROM_GP);
+ int sz;
+ int ret;
+ u16 addr;
+
+ /* allocate eeprom */
+ sz = il->cfg->base_params->eeprom_size;
+ D_EEPROM("NVM size = %d\n", sz);
+ il->eeprom = kzalloc(sz, GFP_KERNEL);
+ if (!il->eeprom) {
+ ret = -ENOMEM;
+ goto alloc_err;
+ }
+ e = (__le16 *)il->eeprom;
+
+ il->cfg->ops->lib->apm_ops.init(il);
+
+ ret = il_eeprom_verify_signature(il);
+ if (ret < 0) {
+ IL_ERR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
+ ret = -ENOENT;
+ goto err;
+ }
+
+ /* Make sure driver (instead of uCode) is allowed to read EEPROM */
+ ret = il->cfg->ops->lib->eeprom_ops.acquire_semaphore(il);
+ if (ret < 0) {
+ IL_ERR("Failed to acquire EEPROM semaphore.\n");
+ ret = -ENOENT;
+ goto err;
+ }
+
+ /* eeprom is an array of 16bit values */
+ for (addr = 0; addr < sz; addr += sizeof(u16)) {
+ u32 r;
+
+ _il_wr(il, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
+
+ ret = _il_poll_bit(il, CSR_EEPROM_REG,
+ CSR_EEPROM_REG_READ_VALID_MSK,
+ CSR_EEPROM_REG_READ_VALID_MSK,
+ IL_EEPROM_ACCESS_TIMEOUT);
+ if (ret < 0) {
+ IL_ERR("Time out reading EEPROM[%d]\n",
+ addr);
+ goto done;
+ }
+ r = _il_rd(il, CSR_EEPROM_REG);
+ e[addr / 2] = cpu_to_le16(r >> 16);
+ }
+
+ D_EEPROM("NVM Type: %s, version: 0x%x\n",
+ "EEPROM",
+ il_eeprom_query16(il, EEPROM_VERSION));
+
+ ret = 0;
+done:
+ il->cfg->ops->lib->eeprom_ops.release_semaphore(il);
+
+err:
+ if (ret)
+ il_eeprom_free(il);
+ /* Reset chip to save power until we load uCode during "up". */
+ il_apm_stop(il);
+alloc_err:
+ return ret;
+}
+EXPORT_SYMBOL(il_eeprom_init);
+
+void il_eeprom_free(struct il_priv *il)
+{
+ kfree(il->eeprom);
+ il->eeprom = NULL;
+}
+EXPORT_SYMBOL(il_eeprom_free);
+
+static void il_init_band_reference(const struct il_priv *il,
+ int eep_band, int *eeprom_ch_count,
+ const struct il_eeprom_channel **eeprom_ch_info,
+ const u8 **eeprom_ch_idx)
+{
+ u32 offset = il->cfg->ops->lib->
+ eeprom_ops.regulatory_bands[eep_band - 1];
+ switch (eep_band) {
+ case 1: /* 2.4GHz band */
+ *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_1);
+ *eeprom_ch_info = (struct il_eeprom_channel *)
+ il_eeprom_query_addr(il, offset);
+ *eeprom_ch_idx = il_eeprom_band_1;
+ break;
+ case 2: /* 4.9GHz band */
+ *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_2);
+ *eeprom_ch_info = (struct il_eeprom_channel *)
+ il_eeprom_query_addr(il, offset);
+ *eeprom_ch_idx = il_eeprom_band_2;
+ break;
+ case 3: /* 5.2GHz band */
+ *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_3);
+ *eeprom_ch_info = (struct il_eeprom_channel *)
+ il_eeprom_query_addr(il, offset);
+ *eeprom_ch_idx = il_eeprom_band_3;
+ break;
+ case 4: /* 5.5GHz band */
+ *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_4);
+ *eeprom_ch_info = (struct il_eeprom_channel *)
+ il_eeprom_query_addr(il, offset);
+ *eeprom_ch_idx = il_eeprom_band_4;
+ break;
+ case 5: /* 5.7GHz band */
+ *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_5);
+ *eeprom_ch_info = (struct il_eeprom_channel *)
+ il_eeprom_query_addr(il, offset);
+ *eeprom_ch_idx = il_eeprom_band_5;
+ break;
+ case 6: /* 2.4GHz ht40 channels */
+ *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_6);
+ *eeprom_ch_info = (struct il_eeprom_channel *)
+ il_eeprom_query_addr(il, offset);
+ *eeprom_ch_idx = il_eeprom_band_6;
+ break;
+ case 7: /* 5 GHz ht40 channels */
+ *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_7);
+ *eeprom_ch_info = (struct il_eeprom_channel *)
+ il_eeprom_query_addr(il, offset);
+ *eeprom_ch_idx = il_eeprom_band_7;
+ break;
+ default:
+ BUG();
+ }
+}
+
+#define CHECK_AND_PRINT(x) ((eeprom_ch->flags & EEPROM_CHANNEL_##x) \
+ ? # x " " : "")
+/**
+ * il_mod_ht40_chan_info - Copy ht40 channel info into driver's il.
+ *
+ * Does not set up a command, or touch hardware.
+ */
+static int il_mod_ht40_chan_info(struct il_priv *il,
+ enum ieee80211_band band, u16 channel,
+ const struct il_eeprom_channel *eeprom_ch,
+ u8 clear_ht40_extension_channel)
+{
+ struct il_channel_info *ch_info;
+
+ ch_info = (struct il_channel_info *)
+ il_get_channel_info(il, band, channel);
+
+ if (!il_is_channel_valid(ch_info))
+ return -1;
+
+ D_EEPROM("HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
+ " Ad-Hoc %ssupported\n",
+ ch_info->channel,
+ il_is_channel_a_band(ch_info) ?
+ "5.2" : "2.4",
+ CHECK_AND_PRINT(IBSS),
+ CHECK_AND_PRINT(ACTIVE),
+ CHECK_AND_PRINT(RADAR),
+ CHECK_AND_PRINT(WIDE),
+ CHECK_AND_PRINT(DFS),
+ eeprom_ch->flags,
+ eeprom_ch->max_power_avg,
+ ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS)
+ && !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ?
+ "" : "not ");
+
+ ch_info->ht40_eeprom = *eeprom_ch;
+ ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg;
+ ch_info->ht40_flags = eeprom_ch->flags;
+ if (eeprom_ch->flags & EEPROM_CHANNEL_VALID)
+ ch_info->ht40_extension_channel &=
+ ~clear_ht40_extension_channel;
+
+ return 0;
+}
+
+#define CHECK_AND_PRINT_I(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
+ ? # x " " : "")
+
+/**
+ * il_init_channel_map - Set up driver's info for all possible channels
+ */
+int il_init_channel_map(struct il_priv *il)
+{
+ int eeprom_ch_count = 0;
+ const u8 *eeprom_ch_idx = NULL;
+ const struct il_eeprom_channel *eeprom_ch_info = NULL;
+ int band, ch;
+ struct il_channel_info *ch_info;
+
+ if (il->channel_count) {
+ D_EEPROM("Channel map already initialized.\n");
+ return 0;
+ }
+
+ D_EEPROM("Initializing regulatory info from EEPROM\n");
+
+ il->channel_count =
+ ARRAY_SIZE(il_eeprom_band_1) +
+ ARRAY_SIZE(il_eeprom_band_2) +
+ ARRAY_SIZE(il_eeprom_band_3) +
+ ARRAY_SIZE(il_eeprom_band_4) +
+ ARRAY_SIZE(il_eeprom_band_5);
+
+ D_EEPROM("Parsing data for %d channels.\n",
+ il->channel_count);
+
+ il->channel_info = kzalloc(sizeof(struct il_channel_info) *
+ il->channel_count, GFP_KERNEL);
+ if (!il->channel_info) {
+ IL_ERR("Could not allocate channel_info\n");
+ il->channel_count = 0;
+ return -ENOMEM;
+ }
+
+ ch_info = il->channel_info;
+
+ /* Loop through the 5 EEPROM bands adding them in order to the
+ * channel map we maintain (that contains additional information than
+ * what just in the EEPROM) */
+ for (band = 1; band <= 5; band++) {
+
+ il_init_band_reference(il, band, &eeprom_ch_count,
+ &eeprom_ch_info, &eeprom_ch_idx);
+
+ /* Loop through each band adding each of the channels */
+ for (ch = 0; ch < eeprom_ch_count; ch++) {
+ ch_info->channel = eeprom_ch_idx[ch];
+ ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ :
+ IEEE80211_BAND_5GHZ;
+
+ /* permanently store EEPROM's channel regulatory flags
+ * and max power in channel info database. */
+ ch_info->eeprom = eeprom_ch_info[ch];
+
+ /* Copy the run-time flags so they are there even on
+ * invalid channels */
+ ch_info->flags = eeprom_ch_info[ch].flags;
+ /* First write that ht40 is not enabled, and then enable
+ * one by one */
+ ch_info->ht40_extension_channel =
+ IEEE80211_CHAN_NO_HT40;
+
+ if (!(il_is_channel_valid(ch_info))) {
+ D_EEPROM(
+ "Ch. %d Flags %x [%sGHz] - "
+ "No traffic\n",
+ ch_info->channel,
+ ch_info->flags,
+ il_is_channel_a_band(ch_info) ?
+ "5.2" : "2.4");
+ ch_info++;
+ continue;
+ }
+
+ /* Initialize regulatory-based run-time data */
+ ch_info->max_power_avg = ch_info->curr_txpow =
+ eeprom_ch_info[ch].max_power_avg;
+ ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
+ ch_info->min_power = 0;
+
+ D_EEPROM("Ch. %d [%sGHz] "
+ "%s%s%s%s%s%s(0x%02x %ddBm):"
+ " Ad-Hoc %ssupported\n",
+ ch_info->channel,
+ il_is_channel_a_band(ch_info) ?
+ "5.2" : "2.4",
+ CHECK_AND_PRINT_I(VALID),
+ CHECK_AND_PRINT_I(IBSS),
+ CHECK_AND_PRINT_I(ACTIVE),
+ CHECK_AND_PRINT_I(RADAR),
+ CHECK_AND_PRINT_I(WIDE),
+ CHECK_AND_PRINT_I(DFS),
+ eeprom_ch_info[ch].flags,
+ eeprom_ch_info[ch].max_power_avg,
+ ((eeprom_ch_info[ch].
+ flags & EEPROM_CHANNEL_IBSS)
+ && !(eeprom_ch_info[ch].
+ flags & EEPROM_CHANNEL_RADAR))
+ ? "" : "not ");
+
+ ch_info++;
+ }
+ }
+
+ /* Check if we do have HT40 channels */
+ if (il->cfg->ops->lib->eeprom_ops.regulatory_bands[5] ==
+ EEPROM_REGULATORY_BAND_NO_HT40 &&
+ il->cfg->ops->lib->eeprom_ops.regulatory_bands[6] ==
+ EEPROM_REGULATORY_BAND_NO_HT40)
+ return 0;
+
+ /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */
+ for (band = 6; band <= 7; band++) {
+ enum ieee80211_band ieeeband;
+
+ il_init_band_reference(il, band, &eeprom_ch_count,
+ &eeprom_ch_info, &eeprom_ch_idx);
+
+ /* EEPROM band 6 is 2.4, band 7 is 5 GHz */
+ ieeeband =
+ (band == 6) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
+
+ /* Loop through each band adding each of the channels */
+ for (ch = 0; ch < eeprom_ch_count; ch++) {
+ /* Set up driver's info for lower half */
+ il_mod_ht40_chan_info(il, ieeeband,
+ eeprom_ch_idx[ch],
+ &eeprom_ch_info[ch],
+ IEEE80211_CHAN_NO_HT40PLUS);
+
+ /* Set up driver's info for upper half */
+ il_mod_ht40_chan_info(il, ieeeband,
+ eeprom_ch_idx[ch] + 4,
+ &eeprom_ch_info[ch],
+ IEEE80211_CHAN_NO_HT40MINUS);
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(il_init_channel_map);
+
+/*
+ * il_free_channel_map - undo allocations in il_init_channel_map
+ */
+void il_free_channel_map(struct il_priv *il)
+{
+ kfree(il->channel_info);
+ il->channel_count = 0;
+}
+EXPORT_SYMBOL(il_free_channel_map);
+
+/**
+ * il_get_channel_info - Find driver's ilate channel info
+ *
+ * Based on band and channel number.
+ */
+const struct
+il_channel_info *il_get_channel_info(const struct il_priv *il,
+ enum ieee80211_band band, u16 channel)
+{
+ int i;
+
+ switch (band) {
+ case IEEE80211_BAND_5GHZ:
+ for (i = 14; i < il->channel_count; i++) {
+ if (il->channel_info[i].channel == channel)
+ return &il->channel_info[i];
+ }
+ break;
+ case IEEE80211_BAND_2GHZ:
+ if (channel >= 1 && channel <= 14)
+ return &il->channel_info[channel - 1];
+ break;
+ default:
+ BUG();
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL(il_get_channel_info);
+
+/*
+ * Setting power level allows the card to go to sleep when not busy.
+ *
+ * We calculate a sleep command based on the required latency, which
+ * we get from mac80211. In order to handle thermal throttling, we can
+ * also use pre-defined power levels.
+ */
+
+/*
+ * This defines the old power levels. They are still used by default
+ * (level 1) and for thermal throttle (levels 3 through 5)
+ */
+
+struct il_power_vec_entry {
+ struct il_powertable_cmd cmd;
+ u8 no_dtim; /* number of skip dtim */
+};
+
+static void il_power_sleep_cam_cmd(struct il_priv *il,
+ struct il_powertable_cmd *cmd)
+{
+ memset(cmd, 0, sizeof(*cmd));
+
+ if (il->power_data.pci_pm)
+ cmd->flags |= IL_POWER_PCI_PM_MSK;
+
+ D_POWER("Sleep command for CAM\n");
+}
+
+static int
+il_set_power(struct il_priv *il, struct il_powertable_cmd *cmd)
+{
+ D_POWER("Sending power/sleep command\n");
+ D_POWER("Flags value = 0x%08X\n", cmd->flags);
+ D_POWER("Tx timeout = %u\n",
+ le32_to_cpu(cmd->tx_data_timeout));
+ D_POWER("Rx timeout = %u\n",
+ le32_to_cpu(cmd->rx_data_timeout));
+ D_POWER(
+ "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
+ le32_to_cpu(cmd->sleep_interval[0]),
+ le32_to_cpu(cmd->sleep_interval[1]),
+ le32_to_cpu(cmd->sleep_interval[2]),
+ le32_to_cpu(cmd->sleep_interval[3]),
+ le32_to_cpu(cmd->sleep_interval[4]));
+
+ return il_send_cmd_pdu(il, C_POWER_TBL,
+ sizeof(struct il_powertable_cmd), cmd);
+}
+
+int
+il_power_set_mode(struct il_priv *il, struct il_powertable_cmd *cmd,
+ bool force)
+{
+ int ret;
+ bool update_chains;
+
+ lockdep_assert_held(&il->mutex);
+
+ /* Don't update the RX chain when chain noise calibration is running */
+ update_chains = il->chain_noise_data.state == IL_CHAIN_NOISE_DONE ||
+ il->chain_noise_data.state == IL_CHAIN_NOISE_ALIVE;
+
+ if (!memcmp(&il->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force)
+ return 0;
+
+ if (!il_is_ready_rf(il))
+ return -EIO;
+
+ /* scan complete use sleep_power_next, need to be updated */
+ memcpy(&il->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
+ if (test_bit(S_SCANNING, &il->status) && !force) {
+ D_INFO("Defer power set mode while scanning\n");
+ return 0;
+ }
+
+ if (cmd->flags & IL_POWER_DRIVER_ALLOW_SLEEP_MSK)
+ set_bit(S_POWER_PMI, &il->status);
+
+ ret = il_set_power(il, cmd);
+ if (!ret) {
+ if (!(cmd->flags & IL_POWER_DRIVER_ALLOW_SLEEP_MSK))
+ clear_bit(S_POWER_PMI, &il->status);
+
+ if (il->cfg->ops->lib->update_chain_flags && update_chains)
+ il->cfg->ops->lib->update_chain_flags(il);
+ else if (il->cfg->ops->lib->update_chain_flags)
+ D_POWER(
+ "Cannot update the power, chain noise "
+ "calibration running: %d\n",
+ il->chain_noise_data.state);
+
+ memcpy(&il->power_data.sleep_cmd, cmd, sizeof(*cmd));
+ } else
+ IL_ERR("set power fail, ret = %d", ret);
+
+ return ret;
+}
+
+int il_power_update_mode(struct il_priv *il, bool force)
+{
+ struct il_powertable_cmd cmd;
+
+ il_power_sleep_cam_cmd(il, &cmd);
+ return il_power_set_mode(il, &cmd, force);
+}
+EXPORT_SYMBOL(il_power_update_mode);
+
+/* initialize to default */
+void il_power_initialize(struct il_priv *il)
+{
+ u16 lctl = il_pcie_link_ctl(il);
+
+ il->power_data.pci_pm = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
+
+ il->power_data.debug_sleep_level_override = -1;
+
+ memset(&il->power_data.sleep_cmd, 0,
+ sizeof(il->power_data.sleep_cmd));
+}
+EXPORT_SYMBOL(il_power_initialize);
+
+/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
+ * sending probe req. This should be set long enough to hear probe responses
+ * from more than one AP. */
+#define IL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */
+#define IL_ACTIVE_DWELL_TIME_52 (20)
+
+#define IL_ACTIVE_DWELL_FACTOR_24GHZ (3)
+#define IL_ACTIVE_DWELL_FACTOR_52GHZ (2)
+
+/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
+ * Must be set longer than active dwell time.
+ * For the most reliable scan, set > AP beacon interval (typically 100msec). */
+#define IL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
+#define IL_PASSIVE_DWELL_TIME_52 (10)
+#define IL_PASSIVE_DWELL_BASE (100)
+#define IL_CHANNEL_TUNE_TIME 5
+
+static int il_send_scan_abort(struct il_priv *il)
+{
+ int ret;
+ struct il_rx_pkt *pkt;
+ struct il_host_cmd cmd = {
+ .id = C_SCAN_ABORT,
+ .flags = CMD_WANT_SKB,
+ };
+
+ /* Exit instantly with error when device is not ready
+ * to receive scan abort command or it does not perform
+ * hardware scan currently */
+ if (!test_bit(S_READY, &il->status) ||
+ !test_bit(S_GEO_CONFIGURED, &il->status) ||
+ !test_bit(S_SCAN_HW, &il->status) ||
+ test_bit(S_FW_ERROR, &il->status) ||
+ test_bit(S_EXIT_PENDING, &il->status))
+ return -EIO;
+
+ ret = il_send_cmd_sync(il, &cmd);
+ if (ret)
+ return ret;
+
+ pkt = (struct il_rx_pkt *)cmd.reply_page;
+ if (pkt->u.status != CAN_ABORT_STATUS) {
+ /* The scan abort will return 1 for success or
+ * 2 for "failure". A failure condition can be
+ * due to simply not being in an active scan which
+ * can occur if we send the scan abort before we
+ * the microcode has notified us that a scan is
+ * completed. */
+ D_SCAN("SCAN_ABORT ret %d.\n", pkt->u.status);
+ ret = -EIO;
+ }
+
+ il_free_pages(il, cmd.reply_page);
+ return ret;
+}
+
+static void il_complete_scan(struct il_priv *il, bool aborted)
+{
+ /* check if scan was requested from mac80211 */
+ if (il->scan_request) {
+ D_SCAN("Complete scan in mac80211\n");
+ ieee80211_scan_completed(il->hw, aborted);
+ }
+
+ il->scan_vif = NULL;
+ il->scan_request = NULL;
+}
+
+void il_force_scan_end(struct il_priv *il)
+{
+ lockdep_assert_held(&il->mutex);
+
+ if (!test_bit(S_SCANNING, &il->status)) {
+ D_SCAN("Forcing scan end while not scanning\n");
+ return;
+ }
+
+ D_SCAN("Forcing scan end\n");
+ clear_bit(S_SCANNING, &il->status);
+ clear_bit(S_SCAN_HW, &il->status);
+ clear_bit(S_SCAN_ABORTING, &il->status);
+ il_complete_scan(il, true);
+}
+
+static void il_do_scan_abort(struct il_priv *il)
+{
+ int ret;
+
+ lockdep_assert_held(&il->mutex);
+
+ if (!test_bit(S_SCANNING, &il->status)) {
+ D_SCAN("Not performing scan to abort\n");
+ return;
+ }
+
+ if (test_and_set_bit(S_SCAN_ABORTING, &il->status)) {
+ D_SCAN("Scan abort in progress\n");
+ return;
+ }
+
+ ret = il_send_scan_abort(il);
+ if (ret) {
+ D_SCAN("Send scan abort failed %d\n", ret);
+ il_force_scan_end(il);
+ } else
+ D_SCAN("Successfully send scan abort\n");
+}
+
+/**
+ * il_scan_cancel - Cancel any currently executing HW scan
+ */
+int il_scan_cancel(struct il_priv *il)
+{
+ D_SCAN("Queuing abort scan\n");
+ queue_work(il->workqueue, &il->abort_scan);
+ return 0;
+}
+EXPORT_SYMBOL(il_scan_cancel);
+
+/**
+ * il_scan_cancel_timeout - Cancel any currently executing HW scan
+ * @ms: amount of time to wait (in milliseconds) for scan to abort
+ *
+ */
+int il_scan_cancel_timeout(struct il_priv *il, unsigned long ms)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(ms);
+
+ lockdep_assert_held(&il->mutex);
+
+ D_SCAN("Scan cancel timeout\n");
+
+ il_do_scan_abort(il);
+
+ while (time_before_eq(jiffies, timeout)) {
+ if (!test_bit(S_SCAN_HW, &il->status))
+ break;
+ msleep(20);
+ }
+
+ return test_bit(S_SCAN_HW, &il->status);
+}
+EXPORT_SYMBOL(il_scan_cancel_timeout);
+
+/* Service response to C_SCAN (0x80) */
+static void il_hdl_scan(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+#ifdef CONFIG_IWLEGACY_DEBUG
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il_scanreq_notification *notif =
+ (struct il_scanreq_notification *)pkt->u.raw;
+
+ D_SCAN("Scan request status = 0x%x\n", notif->status);
+#endif
+}
+
+/* Service N_SCAN_START (0x82) */
+static void il_hdl_scan_start(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il_scanstart_notification *notif =
+ (struct il_scanstart_notification *)pkt->u.raw;
+ il->scan_start_tsf = le32_to_cpu(notif->tsf_low);
+ D_SCAN("Scan start: "
+ "%d [802.11%s] "
+ "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
+ notif->channel,
+ notif->band ? "bg" : "a",
+ le32_to_cpu(notif->tsf_high),
+ le32_to_cpu(notif->tsf_low),
+ notif->status, notif->beacon_timer);
+}
+
+/* Service N_SCAN_RESULTS (0x83) */
+static void il_hdl_scan_results(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+#ifdef CONFIG_IWLEGACY_DEBUG
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il_scanresults_notification *notif =
+ (struct il_scanresults_notification *)pkt->u.raw;
+
+ D_SCAN("Scan ch.res: "
+ "%d [802.11%s] "
+ "(TSF: 0x%08X:%08X) - %d "
+ "elapsed=%lu usec\n",
+ notif->channel,
+ notif->band ? "bg" : "a",
+ le32_to_cpu(notif->tsf_high),
+ le32_to_cpu(notif->tsf_low),
+ le32_to_cpu(notif->stats[0]),
+ le32_to_cpu(notif->tsf_low) - il->scan_start_tsf);
+#endif
+}
+
+/* Service N_SCAN_COMPLETE (0x84) */
+static void il_hdl_scan_complete(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
+#endif
+
+ D_SCAN(
+ "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
+ scan_notif->scanned_channels,
+ scan_notif->tsf_low,
+ scan_notif->tsf_high, scan_notif->status);
+
+ /* The HW is no longer scanning */
+ clear_bit(S_SCAN_HW, &il->status);
+
+ D_SCAN("Scan on %sGHz took %dms\n",
+ (il->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2",
+ jiffies_to_msecs(jiffies - il->scan_start));
+
+ queue_work(il->workqueue, &il->scan_completed);
+}
+
+void il_setup_rx_scan_handlers(struct il_priv *il)
+{
+ /* scan handlers */
+ il->handlers[C_SCAN] = il_hdl_scan;
+ il->handlers[N_SCAN_START] =
+ il_hdl_scan_start;
+ il->handlers[N_SCAN_RESULTS] =
+ il_hdl_scan_results;
+ il->handlers[N_SCAN_COMPLETE] =
+ il_hdl_scan_complete;
+}
+EXPORT_SYMBOL(il_setup_rx_scan_handlers);
+
+inline u16 il_get_active_dwell_time(struct il_priv *il,
+ enum ieee80211_band band,
+ u8 n_probes)
+{
+ if (band == IEEE80211_BAND_5GHZ)
+ return IL_ACTIVE_DWELL_TIME_52 +
+ IL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1);
+ else
+ return IL_ACTIVE_DWELL_TIME_24 +
+ IL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
+}
+EXPORT_SYMBOL(il_get_active_dwell_time);
+
+u16 il_get_passive_dwell_time(struct il_priv *il,
+ enum ieee80211_band band,
+ struct ieee80211_vif *vif)
+{
+ struct il_rxon_context *ctx = &il->ctx;
+ u16 value;
+
+ u16 passive = (band == IEEE80211_BAND_2GHZ) ?
+ IL_PASSIVE_DWELL_BASE + IL_PASSIVE_DWELL_TIME_24 :
+ IL_PASSIVE_DWELL_BASE + IL_PASSIVE_DWELL_TIME_52;
+
+ if (il_is_any_associated(il)) {
+ /*
+ * If we're associated, we clamp the maximum passive
+ * dwell time to be 98% of the smallest beacon interval
+ * (minus 2 * channel tune time)
+ */
+ value = ctx->vif ? ctx->vif->bss_conf.beacon_int : 0;
+ if (value > IL_PASSIVE_DWELL_BASE || !value)
+ value = IL_PASSIVE_DWELL_BASE;
+ value = (value * 98) / 100 - IL_CHANNEL_TUNE_TIME * 2;
+ passive = min(value, passive);
+ }
+
+ return passive;
+}
+EXPORT_SYMBOL(il_get_passive_dwell_time);
+
+void il_init_scan_params(struct il_priv *il)
+{
+ u8 ant_idx = fls(il->hw_params.valid_tx_ant) - 1;
+ if (!il->scan_tx_ant[IEEE80211_BAND_5GHZ])
+ il->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx;
+ if (!il->scan_tx_ant[IEEE80211_BAND_2GHZ])
+ il->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx;
+}
+EXPORT_SYMBOL(il_init_scan_params);
+
+static int il_scan_initiate(struct il_priv *il,
+ struct ieee80211_vif *vif)
+{
+ int ret;
+
+ lockdep_assert_held(&il->mutex);
+
+ if (WARN_ON(!il->cfg->ops->utils->request_scan))
+ return -EOPNOTSUPP;
+
+ cancel_delayed_work(&il->scan_check);
+
+ if (!il_is_ready_rf(il)) {
+ IL_WARN("Request scan called when driver not ready.\n");
+ return -EIO;
+ }
+
+ if (test_bit(S_SCAN_HW, &il->status)) {
+ D_SCAN(
+ "Multiple concurrent scan requests in parallel.\n");
+ return -EBUSY;
+ }
+
+ if (test_bit(S_SCAN_ABORTING, &il->status)) {
+ D_SCAN("Scan request while abort pending.\n");
+ return -EBUSY;
+ }
+
+ D_SCAN("Starting scan...\n");
+
+ set_bit(S_SCANNING, &il->status);
+ il->scan_start = jiffies;
+
+ ret = il->cfg->ops->utils->request_scan(il, vif);
+ if (ret) {
+ clear_bit(S_SCANNING, &il->status);
+ return ret;
+ }
+
+ queue_delayed_work(il->workqueue, &il->scan_check,
+ IL_SCAN_CHECK_WATCHDOG);
+
+ return 0;
+}
+
+int il_mac_hw_scan(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct cfg80211_scan_request *req)
+{
+ struct il_priv *il = hw->priv;
+ int ret;
+
+ D_MAC80211("enter\n");
+
+ if (req->n_channels == 0)
+ return -EINVAL;
+
+ mutex_lock(&il->mutex);
+
+ if (test_bit(S_SCANNING, &il->status)) {
+ D_SCAN("Scan already in progress.\n");
+ ret = -EAGAIN;
+ goto out_unlock;
+ }
+
+ /* mac80211 will only ask for one band at a time */
+ il->scan_request = req;
+ il->scan_vif = vif;
+ il->scan_band = req->channels[0]->band;
+
+ ret = il_scan_initiate(il, vif);
+
+ D_MAC80211("leave\n");
+
+out_unlock:
+ mutex_unlock(&il->mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(il_mac_hw_scan);
+
+static void il_bg_scan_check(struct work_struct *data)
+{
+ struct il_priv *il =
+ container_of(data, struct il_priv, scan_check.work);
+
+ D_SCAN("Scan check work\n");
+
+ /* Since we are here firmware does not finish scan and
+ * most likely is in bad shape, so we don't bother to
+ * send abort command, just force scan complete to mac80211 */
+ mutex_lock(&il->mutex);
+ il_force_scan_end(il);
+ mutex_unlock(&il->mutex);
+}
+
+/**
+ * il_fill_probe_req - fill in all required fields and IE for probe request
+ */
+
+u16
+il_fill_probe_req(struct il_priv *il, struct ieee80211_mgmt *frame,
+ const u8 *ta, const u8 *ies, int ie_len, int left)
+{
+ int len = 0;
+ u8 *pos = NULL;
+
+ /* Make sure there is enough space for the probe request,
+ * two mandatory IEs and the data */
+ left -= 24;
+ if (left < 0)
+ return 0;
+
+ frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
+ memcpy(frame->da, il_bcast_addr, ETH_ALEN);
+ memcpy(frame->sa, ta, ETH_ALEN);
+ memcpy(frame->bssid, il_bcast_addr, ETH_ALEN);
+ frame->seq_ctrl = 0;
+
+ len += 24;
+
+ /* ...next IE... */
+ pos = &frame->u.probe_req.variable[0];
+
+ /* fill in our indirect SSID IE */
+ left -= 2;
+ if (left < 0)
+ return 0;
+ *pos++ = WLAN_EID_SSID;
+ *pos++ = 0;
+
+ len += 2;
+
+ if (WARN_ON(left < ie_len))
+ return len;
+
+ if (ies && ie_len) {
+ memcpy(pos, ies, ie_len);
+ len += ie_len;
+ }
+
+ return (u16)len;
+}
+EXPORT_SYMBOL(il_fill_probe_req);
+
+static void il_bg_abort_scan(struct work_struct *work)
+{
+ struct il_priv *il = container_of(work, struct il_priv, abort_scan);
+
+ D_SCAN("Abort scan work\n");
+
+ /* We keep scan_check work queued in case when firmware will not
+ * report back scan completed notification */
+ mutex_lock(&il->mutex);
+ il_scan_cancel_timeout(il, 200);
+ mutex_unlock(&il->mutex);
+}
+
+static void il_bg_scan_completed(struct work_struct *work)
+{
+ struct il_priv *il =
+ container_of(work, struct il_priv, scan_completed);
+ bool aborted;
+
+ D_SCAN("Completed scan.\n");
+
+ cancel_delayed_work(&il->scan_check);
+
+ mutex_lock(&il->mutex);
+
+ aborted = test_and_clear_bit(S_SCAN_ABORTING, &il->status);
+ if (aborted)
+ D_SCAN("Aborted scan completed.\n");
+
+ if (!test_and_clear_bit(S_SCANNING, &il->status)) {
+ D_SCAN("Scan already completed.\n");
+ goto out_settings;
+ }
+
+ il_complete_scan(il, aborted);
+
+out_settings:
+ /* Can we still talk to firmware ? */
+ if (!il_is_ready_rf(il))
+ goto out;
+
+ /*
+ * We do not commit power settings while scan is pending,
+ * do it now if the settings changed.
+ */
+ il_power_set_mode(il, &il->power_data.sleep_cmd_next, false);
+ il_set_tx_power(il, il->tx_power_next, false);
+
+ il->cfg->ops->utils->post_scan(il);
+
+out:
+ mutex_unlock(&il->mutex);
+}
+
+void il_setup_scan_deferred_work(struct il_priv *il)
+{
+ INIT_WORK(&il->scan_completed, il_bg_scan_completed);
+ INIT_WORK(&il->abort_scan, il_bg_abort_scan);
+ INIT_DELAYED_WORK(&il->scan_check, il_bg_scan_check);
+}
+EXPORT_SYMBOL(il_setup_scan_deferred_work);
+
+void il_cancel_scan_deferred_work(struct il_priv *il)
+{
+ cancel_work_sync(&il->abort_scan);
+ cancel_work_sync(&il->scan_completed);
+
+ if (cancel_delayed_work_sync(&il->scan_check)) {
+ mutex_lock(&il->mutex);
+ il_force_scan_end(il);
+ mutex_unlock(&il->mutex);
+ }
+}
+EXPORT_SYMBOL(il_cancel_scan_deferred_work);
+
+/* il->sta_lock must be held */
+static void il_sta_ucode_activate(struct il_priv *il, u8 sta_id)
+{
+
+ if (!(il->stations[sta_id].used & IL_STA_DRIVER_ACTIVE))
+ IL_ERR(
+ "ACTIVATE a non DRIVER active station id %u addr %pM\n",
+ sta_id, il->stations[sta_id].sta.sta.addr);
+
+ if (il->stations[sta_id].used & IL_STA_UCODE_ACTIVE) {
+ D_ASSOC(
+ "STA id %u addr %pM already present"
+ " in uCode (according to driver)\n",
+ sta_id, il->stations[sta_id].sta.sta.addr);
+ } else {
+ il->stations[sta_id].used |= IL_STA_UCODE_ACTIVE;
+ D_ASSOC("Added STA id %u addr %pM to uCode\n",
+ sta_id, il->stations[sta_id].sta.sta.addr);
+ }
+}
+
+static int il_process_add_sta_resp(struct il_priv *il,
+ struct il_addsta_cmd *addsta,
+ struct il_rx_pkt *pkt,
+ bool sync)
+{
+ u8 sta_id = addsta->sta.sta_id;
+ unsigned long flags;
+ int ret = -EIO;
+
+ if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
+ IL_ERR("Bad return from C_ADD_STA (0x%08X)\n",
+ pkt->hdr.flags);
+ return ret;
+ }
+
+ D_INFO("Processing response for adding station %u\n",
+ sta_id);
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+
+ switch (pkt->u.add_sta.status) {
+ case ADD_STA_SUCCESS_MSK:
+ D_INFO("C_ADD_STA PASSED\n");
+ il_sta_ucode_activate(il, sta_id);
+ ret = 0;
+ break;
+ case ADD_STA_NO_ROOM_IN_TBL:
+ IL_ERR("Adding station %d failed, no room in table.\n",
+ sta_id);
+ break;
+ case ADD_STA_NO_BLOCK_ACK_RESOURCE:
+ IL_ERR(
+ "Adding station %d failed, no block ack resource.\n",
+ sta_id);
+ break;
+ case ADD_STA_MODIFY_NON_EXIST_STA:
+ IL_ERR("Attempting to modify non-existing station %d\n",
+ sta_id);
+ break;
+ default:
+ D_ASSOC("Received C_ADD_STA:(0x%08X)\n",
+ pkt->u.add_sta.status);
+ break;
+ }
+
+ D_INFO("%s station id %u addr %pM\n",
+ il->stations[sta_id].sta.mode ==
+ STA_CONTROL_MODIFY_MSK ? "Modified" : "Added",
+ sta_id, il->stations[sta_id].sta.sta.addr);
+
+ /*
+ * XXX: The MAC address in the command buffer is often changed from
+ * the original sent to the device. That is, the MAC address
+ * written to the command buffer often is not the same MAC address
+ * read from the command buffer when the command returns. This
+ * issue has not yet been resolved and this debugging is left to
+ * observe the problem.
+ */
+ D_INFO("%s station according to cmd buffer %pM\n",
+ il->stations[sta_id].sta.mode ==
+ STA_CONTROL_MODIFY_MSK ? "Modified" : "Added",
+ addsta->sta.addr);
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return ret;
+}
+
+static void il_add_sta_callback(struct il_priv *il,
+ struct il_device_cmd *cmd,
+ struct il_rx_pkt *pkt)
+{
+ struct il_addsta_cmd *addsta =
+ (struct il_addsta_cmd *)cmd->cmd.payload;
+
+ il_process_add_sta_resp(il, addsta, pkt, false);
+
+}
+
+int il_send_add_sta(struct il_priv *il,
+ struct il_addsta_cmd *sta, u8 flags)
+{
+ struct il_rx_pkt *pkt = NULL;
+ int ret = 0;
+ u8 data[sizeof(*sta)];
+ struct il_host_cmd cmd = {
+ .id = C_ADD_STA,
+ .flags = flags,
+ .data = data,
+ };
+ u8 sta_id __maybe_unused = sta->sta.sta_id;
+
+ D_INFO("Adding sta %u (%pM) %ssynchronously\n",
+ sta_id, sta->sta.addr, flags & CMD_ASYNC ? "a" : "");
+
+ if (flags & CMD_ASYNC)
+ cmd.callback = il_add_sta_callback;
+ else {
+ cmd.flags |= CMD_WANT_SKB;
+ might_sleep();
+ }
+
+ cmd.len = il->cfg->ops->utils->build_addsta_hcmd(sta, data);
+ ret = il_send_cmd(il, &cmd);
+
+ if (ret || (flags & CMD_ASYNC))
+ return ret;
+
+ if (ret == 0) {
+ pkt = (struct il_rx_pkt *)cmd.reply_page;
+ ret = il_process_add_sta_resp(il, sta, pkt, true);
+ }
+ il_free_pages(il, cmd.reply_page);
+
+ return ret;
+}
+EXPORT_SYMBOL(il_send_add_sta);
+
+static void il_set_ht_add_station(struct il_priv *il, u8 idx,
+ struct ieee80211_sta *sta,
+ struct il_rxon_context *ctx)
+{
+ struct ieee80211_sta_ht_cap *sta_ht_inf = &sta->ht_cap;
+ __le32 sta_flags;
+ u8 mimo_ps_mode;
+
+ if (!sta || !sta_ht_inf->ht_supported)
+ goto done;
+
+ mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2;
+ D_ASSOC("spatial multiplexing power save mode: %s\n",
+ (mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ?
+ "static" :
+ (mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ?
+ "dynamic" : "disabled");
+
+ sta_flags = il->stations[idx].sta.station_flags;
+
+ sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK);
+
+ switch (mimo_ps_mode) {
+ case WLAN_HT_CAP_SM_PS_STATIC:
+ sta_flags |= STA_FLG_MIMO_DIS_MSK;
+ break;
+ case WLAN_HT_CAP_SM_PS_DYNAMIC:
+ sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK;
+ break;
+ case WLAN_HT_CAP_SM_PS_DISABLED:
+ break;
+ default:
+ IL_WARN("Invalid MIMO PS mode %d\n", mimo_ps_mode);
+ break;
+ }
+
+ sta_flags |= cpu_to_le32(
+ (u32)sta_ht_inf->ampdu_factor << STA_FLG_MAX_AGG_SIZE_POS);
+
+ sta_flags |= cpu_to_le32(
+ (u32)sta_ht_inf->ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS);
+
+ if (il_is_ht40_tx_allowed(il, ctx, &sta->ht_cap))
+ sta_flags |= STA_FLG_HT40_EN_MSK;
+ else
+ sta_flags &= ~STA_FLG_HT40_EN_MSK;
+
+ il->stations[idx].sta.station_flags = sta_flags;
+ done:
+ return;
+}
+
+/**
+ * il_prep_station - Prepare station information for addition
+ *
+ * should be called with sta_lock held
+ */
+u8 il_prep_station(struct il_priv *il, struct il_rxon_context *ctx,
+ const u8 *addr, bool is_ap, struct ieee80211_sta *sta)
+{
+ struct il_station_entry *station;
+ int i;
+ u8 sta_id = IL_INVALID_STATION;
+ u16 rate;
+
+ if (is_ap)
+ sta_id = ctx->ap_sta_id;
+ else if (is_broadcast_ether_addr(addr))
+ sta_id = ctx->bcast_sta_id;
+ else
+ for (i = IL_STA_ID; i < il->hw_params.max_stations; i++) {
+ if (!compare_ether_addr(il->stations[i].sta.sta.addr,
+ addr)) {
+ sta_id = i;
+ break;
+ }
+
+ if (!il->stations[i].used &&
+ sta_id == IL_INVALID_STATION)
+ sta_id = i;
+ }
+
+ /*
+ * These two conditions have the same outcome, but keep them
+ * separate
+ */
+ if (unlikely(sta_id == IL_INVALID_STATION))
+ return sta_id;
+
+ /*
+ * uCode is not able to deal with multiple requests to add a
+ * station. Keep track if one is in progress so that we do not send
+ * another.
+ */
+ if (il->stations[sta_id].used & IL_STA_UCODE_INPROGRESS) {
+ D_INFO(
+ "STA %d already in process of being added.\n",
+ sta_id);
+ return sta_id;
+ }
+
+ if ((il->stations[sta_id].used & IL_STA_DRIVER_ACTIVE) &&
+ (il->stations[sta_id].used & IL_STA_UCODE_ACTIVE) &&
+ !compare_ether_addr(il->stations[sta_id].sta.sta.addr, addr)) {
+ D_ASSOC(
+ "STA %d (%pM) already added, not adding again.\n",
+ sta_id, addr);
+ return sta_id;
+ }
+
+ station = &il->stations[sta_id];
+ station->used = IL_STA_DRIVER_ACTIVE;
+ D_ASSOC("Add STA to driver ID %d: %pM\n",
+ sta_id, addr);
+ il->num_stations++;
+
+ /* Set up the C_ADD_STA command to send to device */
+ memset(&station->sta, 0, sizeof(struct il_addsta_cmd));
+ memcpy(station->sta.sta.addr, addr, ETH_ALEN);
+ station->sta.mode = 0;
+ station->sta.sta.sta_id = sta_id;
+ station->sta.station_flags = ctx->station_flags;
+ station->ctxid = ctx->ctxid;
+
+ if (sta) {
+ struct il_station_priv_common *sta_priv;
+
+ sta_priv = (void *)sta->drv_priv;
+ sta_priv->ctx = ctx;
+ }
+
+ /*
+ * OK to call unconditionally, since local stations (IBSS BSSID
+ * STA and broadcast STA) pass in a NULL sta, and mac80211
+ * doesn't allow HT IBSS.
+ */
+ il_set_ht_add_station(il, sta_id, sta, ctx);
+
+ /* 3945 only */
+ rate = (il->band == IEEE80211_BAND_5GHZ) ?
+ RATE_6M_PLCP : RATE_1M_PLCP;
+ /* Turn on both antennas for the station... */
+ station->sta.rate_n_flags = cpu_to_le16(rate | RATE_MCS_ANT_AB_MSK);
+
+ return sta_id;
+
+}
+EXPORT_SYMBOL_GPL(il_prep_station);
+
+#define STA_WAIT_TIMEOUT (HZ/2)
+
+/**
+ * il_add_station_common -
+ */
+int
+il_add_station_common(struct il_priv *il,
+ struct il_rxon_context *ctx,
+ const u8 *addr, bool is_ap,
+ struct ieee80211_sta *sta, u8 *sta_id_r)
+{
+ unsigned long flags_spin;
+ int ret = 0;
+ u8 sta_id;
+ struct il_addsta_cmd sta_cmd;
+
+ *sta_id_r = 0;
+ spin_lock_irqsave(&il->sta_lock, flags_spin);
+ sta_id = il_prep_station(il, ctx, addr, is_ap, sta);
+ if (sta_id == IL_INVALID_STATION) {
+ IL_ERR("Unable to prepare station %pM for addition\n",
+ addr);
+ spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+ return -EINVAL;
+ }
+
+ /*
+ * uCode is not able to deal with multiple requests to add a
+ * station. Keep track if one is in progress so that we do not send
+ * another.
+ */
+ if (il->stations[sta_id].used & IL_STA_UCODE_INPROGRESS) {
+ D_INFO(
+ "STA %d already in process of being added.\n",
+ sta_id);
+ spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+ return -EEXIST;
+ }
+
+ if ((il->stations[sta_id].used & IL_STA_DRIVER_ACTIVE) &&
+ (il->stations[sta_id].used & IL_STA_UCODE_ACTIVE)) {
+ D_ASSOC(
+ "STA %d (%pM) already added, not adding again.\n",
+ sta_id, addr);
+ spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+ return -EEXIST;
+ }
+
+ il->stations[sta_id].used |= IL_STA_UCODE_INPROGRESS;
+ memcpy(&sta_cmd, &il->stations[sta_id].sta,
+ sizeof(struct il_addsta_cmd));
+ spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+
+ /* Add station to device's station table */
+ ret = il_send_add_sta(il, &sta_cmd, CMD_SYNC);
+ if (ret) {
+ spin_lock_irqsave(&il->sta_lock, flags_spin);
+ IL_ERR("Adding station %pM failed.\n",
+ il->stations[sta_id].sta.sta.addr);
+ il->stations[sta_id].used &= ~IL_STA_DRIVER_ACTIVE;
+ il->stations[sta_id].used &= ~IL_STA_UCODE_INPROGRESS;
+ spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+ }
+ *sta_id_r = sta_id;
+ return ret;
+}
+EXPORT_SYMBOL(il_add_station_common);
+
+/**
+ * il_sta_ucode_deactivate - deactivate ucode status for a station
+ *
+ * il->sta_lock must be held
+ */
+static void il_sta_ucode_deactivate(struct il_priv *il, u8 sta_id)
+{
+ /* Ucode must be active and driver must be non active */
+ if ((il->stations[sta_id].used &
+ (IL_STA_UCODE_ACTIVE | IL_STA_DRIVER_ACTIVE)) !=
+ IL_STA_UCODE_ACTIVE)
+ IL_ERR("removed non active STA %u\n", sta_id);
+
+ il->stations[sta_id].used &= ~IL_STA_UCODE_ACTIVE;
+
+ memset(&il->stations[sta_id], 0, sizeof(struct il_station_entry));
+ D_ASSOC("Removed STA %u\n", sta_id);
+}
+
+static int il_send_remove_station(struct il_priv *il,
+ const u8 *addr, int sta_id,
+ bool temporary)
+{
+ struct il_rx_pkt *pkt;
+ int ret;
+
+ unsigned long flags_spin;
+ struct il_rem_sta_cmd rm_sta_cmd;
+
+ struct il_host_cmd cmd = {
+ .id = C_REM_STA,
+ .len = sizeof(struct il_rem_sta_cmd),
+ .flags = CMD_SYNC,
+ .data = &rm_sta_cmd,
+ };
+
+ memset(&rm_sta_cmd, 0, sizeof(rm_sta_cmd));
+ rm_sta_cmd.num_sta = 1;
+ memcpy(&rm_sta_cmd.addr, addr, ETH_ALEN);
+
+ cmd.flags |= CMD_WANT_SKB;
+
+ ret = il_send_cmd(il, &cmd);
+
+ if (ret)
+ return ret;
+
+ pkt = (struct il_rx_pkt *)cmd.reply_page;
+ if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
+ IL_ERR("Bad return from C_REM_STA (0x%08X)\n",
+ pkt->hdr.flags);
+ ret = -EIO;
+ }
+
+ if (!ret) {
+ switch (pkt->u.rem_sta.status) {
+ case REM_STA_SUCCESS_MSK:
+ if (!temporary) {
+ spin_lock_irqsave(&il->sta_lock, flags_spin);
+ il_sta_ucode_deactivate(il, sta_id);
+ spin_unlock_irqrestore(&il->sta_lock,
+ flags_spin);
+ }
+ D_ASSOC("C_REM_STA PASSED\n");
+ break;
+ default:
+ ret = -EIO;
+ IL_ERR("C_REM_STA failed\n");
+ break;
+ }
+ }
+ il_free_pages(il, cmd.reply_page);
+
+ return ret;
+}
+
+/**
+ * il_remove_station - Remove driver's knowledge of station.
+ */
+int il_remove_station(struct il_priv *il, const u8 sta_id,
+ const u8 *addr)
+{
+ unsigned long flags;
+
+ if (!il_is_ready(il)) {
+ D_INFO(
+ "Unable to remove station %pM, device not ready.\n",
+ addr);
+ /*
+ * It is typical for stations to be removed when we are
+ * going down. Return success since device will be down
+ * soon anyway
+ */
+ return 0;
+ }
+
+ D_ASSOC("Removing STA from driver:%d %pM\n",
+ sta_id, addr);
+
+ if (WARN_ON(sta_id == IL_INVALID_STATION))
+ return -EINVAL;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+
+ if (!(il->stations[sta_id].used & IL_STA_DRIVER_ACTIVE)) {
+ D_INFO("Removing %pM but non DRIVER active\n",
+ addr);
+ goto out_err;
+ }
+
+ if (!(il->stations[sta_id].used & IL_STA_UCODE_ACTIVE)) {
+ D_INFO("Removing %pM but non UCODE active\n",
+ addr);
+ goto out_err;
+ }
+
+ if (il->stations[sta_id].used & IL_STA_LOCAL) {
+ kfree(il->stations[sta_id].lq);
+ il->stations[sta_id].lq = NULL;
+ }
+
+ il->stations[sta_id].used &= ~IL_STA_DRIVER_ACTIVE;
+
+ il->num_stations--;
+
+ BUG_ON(il->num_stations < 0);
+
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return il_send_remove_station(il, addr, sta_id, false);
+out_err:
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(il_remove_station);
+
+/**
+ * il_clear_ucode_stations - clear ucode station table bits
+ *
+ * This function clears all the bits in the driver indicating
+ * which stations are active in the ucode. Call when something
+ * other than explicit station management would cause this in
+ * the ucode, e.g. unassociated RXON.
+ */
+void il_clear_ucode_stations(struct il_priv *il,
+ struct il_rxon_context *ctx)
+{
+ int i;
+ unsigned long flags_spin;
+ bool cleared = false;
+
+ D_INFO("Clearing ucode stations in driver\n");
+
+ spin_lock_irqsave(&il->sta_lock, flags_spin);
+ for (i = 0; i < il->hw_params.max_stations; i++) {
+ if (ctx && ctx->ctxid != il->stations[i].ctxid)
+ continue;
+
+ if (il->stations[i].used & IL_STA_UCODE_ACTIVE) {
+ D_INFO(
+ "Clearing ucode active for station %d\n", i);
+ il->stations[i].used &= ~IL_STA_UCODE_ACTIVE;
+ cleared = true;
+ }
+ }
+ spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+
+ if (!cleared)
+ D_INFO(
+ "No active stations found to be cleared\n");
+}
+EXPORT_SYMBOL(il_clear_ucode_stations);
+
+/**
+ * il_restore_stations() - Restore driver known stations to device
+ *
+ * All stations considered active by driver, but not present in ucode, is
+ * restored.
+ *
+ * Function sleeps.
+ */
+void
+il_restore_stations(struct il_priv *il, struct il_rxon_context *ctx)
+{
+ struct il_addsta_cmd sta_cmd;
+ struct il_link_quality_cmd lq;
+ unsigned long flags_spin;
+ int i;
+ bool found = false;
+ int ret;
+ bool send_lq;
+
+ if (!il_is_ready(il)) {
+ D_INFO(
+ "Not ready yet, not restoring any stations.\n");
+ return;
+ }
+
+ D_ASSOC("Restoring all known stations ... start.\n");
+ spin_lock_irqsave(&il->sta_lock, flags_spin);
+ for (i = 0; i < il->hw_params.max_stations; i++) {
+ if (ctx->ctxid != il->stations[i].ctxid)
+ continue;
+ if ((il->stations[i].used & IL_STA_DRIVER_ACTIVE) &&
+ !(il->stations[i].used & IL_STA_UCODE_ACTIVE)) {
+ D_ASSOC("Restoring sta %pM\n",
+ il->stations[i].sta.sta.addr);
+ il->stations[i].sta.mode = 0;
+ il->stations[i].used |= IL_STA_UCODE_INPROGRESS;
+ found = true;
+ }
+ }
+
+ for (i = 0; i < il->hw_params.max_stations; i++) {
+ if ((il->stations[i].used & IL_STA_UCODE_INPROGRESS)) {
+ memcpy(&sta_cmd, &il->stations[i].sta,
+ sizeof(struct il_addsta_cmd));
+ send_lq = false;
+ if (il->stations[i].lq) {
+ memcpy(&lq, il->stations[i].lq,
+ sizeof(struct il_link_quality_cmd));
+ send_lq = true;
+ }
+ spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+ ret = il_send_add_sta(il, &sta_cmd, CMD_SYNC);
+ if (ret) {
+ spin_lock_irqsave(&il->sta_lock, flags_spin);
+ IL_ERR("Adding station %pM failed.\n",
+ il->stations[i].sta.sta.addr);
+ il->stations[i].used &=
+ ~IL_STA_DRIVER_ACTIVE;
+ il->stations[i].used &=
+ ~IL_STA_UCODE_INPROGRESS;
+ spin_unlock_irqrestore(&il->sta_lock,
+ flags_spin);
+ }
+ /*
+ * Rate scaling has already been initialized, send
+ * current LQ command
+ */
+ if (send_lq)
+ il_send_lq_cmd(il, ctx, &lq,
+ CMD_SYNC, true);
+ spin_lock_irqsave(&il->sta_lock, flags_spin);
+ il->stations[i].used &= ~IL_STA_UCODE_INPROGRESS;
+ }
+ }
+
+ spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+ if (!found)
+ D_INFO("Restoring all known stations"
+ " .... no stations to be restored.\n");
+ else
+ D_INFO("Restoring all known stations"
+ " .... complete.\n");
+}
+EXPORT_SYMBOL(il_restore_stations);
+
+int il_get_free_ucode_key_idx(struct il_priv *il)
+{
+ int i;
+
+ for (i = 0; i < il->sta_key_max_num; i++)
+ if (!test_and_set_bit(i, &il->ucode_key_table))
+ return i;
+
+ return WEP_INVALID_OFFSET;
+}
+EXPORT_SYMBOL(il_get_free_ucode_key_idx);
+
+void il_dealloc_bcast_stations(struct il_priv *il)
+{
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ for (i = 0; i < il->hw_params.max_stations; i++) {
+ if (!(il->stations[i].used & IL_STA_BCAST))
+ continue;
+
+ il->stations[i].used &= ~IL_STA_UCODE_ACTIVE;
+ il->num_stations--;
+ BUG_ON(il->num_stations < 0);
+ kfree(il->stations[i].lq);
+ il->stations[i].lq = NULL;
+ }
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+}
+EXPORT_SYMBOL_GPL(il_dealloc_bcast_stations);
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+static void il_dump_lq_cmd(struct il_priv *il,
+ struct il_link_quality_cmd *lq)
+{
+ int i;
+ D_RATE("lq station id 0x%x\n", lq->sta_id);
+ D_RATE("lq ant 0x%X 0x%X\n",
+ lq->general_params.single_stream_ant_msk,
+ lq->general_params.dual_stream_ant_msk);
+
+ for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
+ D_RATE("lq idx %d 0x%X\n",
+ i, lq->rs_table[i].rate_n_flags);
+}
+#else
+static inline void il_dump_lq_cmd(struct il_priv *il,
+ struct il_link_quality_cmd *lq)
+{
+}
+#endif
+
+/**
+ * il_is_lq_table_valid() - Test one aspect of LQ cmd for validity
+ *
+ * It sometimes happens when a HT rate has been in use and we
+ * loose connectivity with AP then mac80211 will first tell us that the
+ * current channel is not HT anymore before removing the station. In such a
+ * scenario the RXON flags will be updated to indicate we are not
+ * communicating HT anymore, but the LQ command may still contain HT rates.
+ * Test for this to prevent driver from sending LQ command between the time
+ * RXON flags are updated and when LQ command is updated.
+ */
+static bool il_is_lq_table_valid(struct il_priv *il,
+ struct il_rxon_context *ctx,
+ struct il_link_quality_cmd *lq)
+{
+ int i;
+
+ if (ctx->ht.enabled)
+ return true;
+
+ D_INFO("Channel %u is not an HT channel\n",
+ ctx->active.channel);
+ for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
+ if (le32_to_cpu(lq->rs_table[i].rate_n_flags) &
+ RATE_MCS_HT_MSK) {
+ D_INFO(
+ "idx %d of LQ expects HT channel\n",
+ i);
+ return false;
+ }
+ }
+ return true;
+}
+
+/**
+ * il_send_lq_cmd() - Send link quality command
+ * @init: This command is sent as part of station initialization right
+ * after station has been added.
+ *
+ * The link quality command is sent as the last step of station creation.
+ * This is the special case in which init is set and we call a callback in
+ * this case to clear the state indicating that station creation is in
+ * progress.
+ */
+int il_send_lq_cmd(struct il_priv *il, struct il_rxon_context *ctx,
+ struct il_link_quality_cmd *lq, u8 flags, bool init)
+{
+ int ret = 0;
+ unsigned long flags_spin;
+
+ struct il_host_cmd cmd = {
+ .id = C_TX_LINK_QUALITY_CMD,
+ .len = sizeof(struct il_link_quality_cmd),
+ .flags = flags,
+ .data = lq,
+ };
+
+ if (WARN_ON(lq->sta_id == IL_INVALID_STATION))
+ return -EINVAL;
+
+
+ spin_lock_irqsave(&il->sta_lock, flags_spin);
+ if (!(il->stations[lq->sta_id].used & IL_STA_DRIVER_ACTIVE)) {
+ spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+ return -EINVAL;
+ }
+ spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+
+ il_dump_lq_cmd(il, lq);
+ BUG_ON(init && (cmd.flags & CMD_ASYNC));
+
+ if (il_is_lq_table_valid(il, ctx, lq))
+ ret = il_send_cmd(il, &cmd);
+ else
+ ret = -EINVAL;
+
+ if (cmd.flags & CMD_ASYNC)
+ return ret;
+
+ if (init) {
+ D_INFO("init LQ command complete,"
+ " clearing sta addition status for sta %d\n",
+ lq->sta_id);
+ spin_lock_irqsave(&il->sta_lock, flags_spin);
+ il->stations[lq->sta_id].used &= ~IL_STA_UCODE_INPROGRESS;
+ spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+ }
+ return ret;
+}
+EXPORT_SYMBOL(il_send_lq_cmd);
+
+int il_mac_sta_remove(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ struct il_priv *il = hw->priv;
+ struct il_station_priv_common *sta_common = (void *)sta->drv_priv;
+ int ret;
+
+ D_INFO("received request to remove station %pM\n",
+ sta->addr);
+ mutex_lock(&il->mutex);
+ D_INFO("proceeding to remove station %pM\n",
+ sta->addr);
+ ret = il_remove_station(il, sta_common->sta_id, sta->addr);
+ if (ret)
+ IL_ERR("Error removing station %pM\n",
+ sta->addr);
+ mutex_unlock(&il->mutex);
+ return ret;
+}
+EXPORT_SYMBOL(il_mac_sta_remove);
+
+/************************** RX-FUNCTIONS ****************************/
+/*
+ * Rx theory of operation
+ *
+ * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs),
+ * each of which point to Receive Buffers to be filled by the NIC. These get
+ * used not only for Rx frames, but for any command response or notification
+ * from the NIC. The driver and NIC manage the Rx buffers by means
+ * of idxes into the circular buffer.
+ *
+ * Rx Queue Indexes
+ * The host/firmware share two idx registers for managing the Rx buffers.
+ *
+ * The READ idx maps to the first position that the firmware may be writing
+ * to -- the driver can read up to (but not including) this position and get
+ * good data.
+ * The READ idx is managed by the firmware once the card is enabled.
+ *
+ * The WRITE idx maps to the last position the driver has read from -- the
+ * position preceding WRITE is the last slot the firmware can place a packet.
+ *
+ * The queue is empty (no good data) if WRITE = READ - 1, and is full if
+ * WRITE = READ.
+ *
+ * During initialization, the host sets up the READ queue position to the first
+ * IDX position, and WRITE to the last (READ - 1 wrapped)
+ *
+ * When the firmware places a packet in a buffer, it will advance the READ idx
+ * and fire the RX interrupt. The driver can then query the READ idx and
+ * process as many packets as possible, moving the WRITE idx forward as it
+ * resets the Rx queue buffers with new memory.
+ *
+ * The management in the driver is as follows:
+ * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
+ * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
+ * to replenish the iwl->rxq->rx_free.
+ * + In il_rx_replenish (scheduled) if 'processed' != 'read' then the
+ * iwl->rxq is replenished and the READ IDX is updated (updating the
+ * 'processed' and 'read' driver idxes as well)
+ * + A received packet is processed and handed to the kernel network stack,
+ * detached from the iwl->rxq. The driver 'processed' idx is updated.
+ * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
+ * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
+ * IDX is not incremented and iwl->status(RX_STALLED) is set. If there
+ * were enough free buffers and RX_STALLED is set it is cleared.
+ *
+ *
+ * Driver sequence:
+ *
+ * il_rx_queue_alloc() Allocates rx_free
+ * il_rx_replenish() Replenishes rx_free list from rx_used, and calls
+ * il_rx_queue_restock
+ * il_rx_queue_restock() Moves available buffers from rx_free into Rx
+ * queue, updates firmware pointers, and updates
+ * the WRITE idx. If insufficient rx_free buffers
+ * are available, schedules il_rx_replenish
+ *
+ * -- enable interrupts --
+ * ISR - il_rx() Detach il_rx_bufs from pool up to the
+ * READ IDX, detaching the SKB from the pool.
+ * Moves the packet buffer from queue to rx_used.
+ * Calls il_rx_queue_restock to refill any empty
+ * slots.
+ * ...
+ *
+ */
+
+/**
+ * il_rx_queue_space - Return number of free slots available in queue.
+ */
+int il_rx_queue_space(const struct il_rx_queue *q)
+{
+ int s = q->read - q->write;
+ if (s <= 0)
+ s += RX_QUEUE_SIZE;
+ /* keep some buffer to not confuse full and empty queue */
+ s -= 2;
+ if (s < 0)
+ s = 0;
+ return s;
+}
+EXPORT_SYMBOL(il_rx_queue_space);
+
+/**
+ * il_rx_queue_update_write_ptr - Update the write pointer for the RX queue
+ */
+void
+il_rx_queue_update_write_ptr(struct il_priv *il,
+ struct il_rx_queue *q)
+{
+ unsigned long flags;
+ u32 rx_wrt_ptr_reg = il->hw_params.rx_wrt_ptr_reg;
+ u32 reg;
+
+ spin_lock_irqsave(&q->lock, flags);
+
+ if (q->need_update == 0)
+ goto exit_unlock;
+
+ /* If power-saving is in use, make sure device is awake */
+ if (test_bit(S_POWER_PMI, &il->status)) {
+ reg = _il_rd(il, CSR_UCODE_DRV_GP1);
+
+ if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+ D_INFO(
+ "Rx queue requesting wakeup,"
+ " GP1 = 0x%x\n", reg);
+ il_set_bit(il, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+ goto exit_unlock;
+ }
+
+ q->write_actual = (q->write & ~0x7);
+ il_wr(il, rx_wrt_ptr_reg,
+ q->write_actual);
+
+ /* Else device is assumed to be awake */
+ } else {
+ /* Device expects a multiple of 8 */
+ q->write_actual = (q->write & ~0x7);
+ il_wr(il, rx_wrt_ptr_reg,
+ q->write_actual);
+ }
+
+ q->need_update = 0;
+
+ exit_unlock:
+ spin_unlock_irqrestore(&q->lock, flags);
+}
+EXPORT_SYMBOL(il_rx_queue_update_write_ptr);
+
+int il_rx_queue_alloc(struct il_priv *il)
+{
+ struct il_rx_queue *rxq = &il->rxq;
+ struct device *dev = &il->pci_dev->dev;
+ int i;
+
+ spin_lock_init(&rxq->lock);
+ INIT_LIST_HEAD(&rxq->rx_free);
+ INIT_LIST_HEAD(&rxq->rx_used);
+
+ /* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */
+ rxq->bd = dma_alloc_coherent(dev, 4 * RX_QUEUE_SIZE, &rxq->bd_dma,
+ GFP_KERNEL);
+ if (!rxq->bd)
+ goto err_bd;
+
+ rxq->rb_stts = dma_alloc_coherent(dev, sizeof(struct il_rb_status),
+ &rxq->rb_stts_dma, GFP_KERNEL);
+ if (!rxq->rb_stts)
+ goto err_rb;
+
+ /* Fill the rx_used queue with _all_ of the Rx buffers */
+ for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++)
+ list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+
+ /* Set us so that we have processed and used all buffers, but have
+ * not restocked the Rx queue with fresh buffers */
+ rxq->read = rxq->write = 0;
+ rxq->write_actual = 0;
+ rxq->free_count = 0;
+ rxq->need_update = 0;
+ return 0;
+
+err_rb:
+ dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+ rxq->bd_dma);
+err_bd:
+ return -ENOMEM;
+}
+EXPORT_SYMBOL(il_rx_queue_alloc);
+
+
+void il_hdl_spectrum_measurement(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il_spectrum_notification *report = &(pkt->u.spectrum_notif);
+
+ if (!report->state) {
+ D_11H(
+ "Spectrum Measure Notification: Start\n");
+ return;
+ }
+
+ memcpy(&il->measure_report, report, sizeof(*report));
+ il->measurement_status |= MEASUREMENT_READY;
+}
+EXPORT_SYMBOL(il_hdl_spectrum_measurement);
+
+/*
+ * returns non-zero if packet should be dropped
+ */
+int il_set_decrypted_flag(struct il_priv *il,
+ struct ieee80211_hdr *hdr,
+ u32 decrypt_res,
+ struct ieee80211_rx_status *stats)
+{
+ u16 fc = le16_to_cpu(hdr->frame_control);
+
+ /*
+ * All contexts have the same setting here due to it being
+ * a module parameter, so OK to check any context.
+ */
+ if (il->ctx.active.filter_flags &
+ RXON_FILTER_DIS_DECRYPT_MSK)
+ return 0;
+
+ if (!(fc & IEEE80211_FCTL_PROTECTED))
+ return 0;
+
+ D_RX("decrypt_res:0x%x\n", decrypt_res);
+ switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) {
+ case RX_RES_STATUS_SEC_TYPE_TKIP:
+ /* The uCode has got a bad phase 1 Key, pushes the packet.
+ * Decryption will be done in SW. */
+ if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
+ RX_RES_STATUS_BAD_KEY_TTAK)
+ break;
+
+ case RX_RES_STATUS_SEC_TYPE_WEP:
+ if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
+ RX_RES_STATUS_BAD_ICV_MIC) {
+ /* bad ICV, the packet is destroyed since the
+ * decryption is inplace, drop it */
+ D_RX("Packet destroyed\n");
+ return -1;
+ }
+ case RX_RES_STATUS_SEC_TYPE_CCMP:
+ if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
+ RX_RES_STATUS_DECRYPT_OK) {
+ D_RX("hw decrypt successfully!!!\n");
+ stats->flag |= RX_FLAG_DECRYPTED;
+ }
+ break;
+
+ default:
+ break;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(il_set_decrypted_flag);
+
+/**
+ * il_txq_update_write_ptr - Send new write idx to hardware
+ */
+void
+il_txq_update_write_ptr(struct il_priv *il, struct il_tx_queue *txq)
+{
+ u32 reg = 0;
+ int txq_id = txq->q.id;
+
+ if (txq->need_update == 0)
+ return;
+
+ /* if we're trying to save power */
+ if (test_bit(S_POWER_PMI, &il->status)) {
+ /* wake up nic if it's powered down ...
+ * uCode will wake up, and interrupt us again, so next
+ * time we'll skip this part. */
+ reg = _il_rd(il, CSR_UCODE_DRV_GP1);
+
+ if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+ D_INFO(
+ "Tx queue %d requesting wakeup,"
+ " GP1 = 0x%x\n", txq_id, reg);
+ il_set_bit(il, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+ return;
+ }
+
+ il_wr(il, HBUS_TARG_WRPTR,
+ txq->q.write_ptr | (txq_id << 8));
+
+ /*
+ * else not in power-save mode,
+ * uCode will never sleep when we're
+ * trying to tx (during RFKILL, we're not trying to tx).
+ */
+ } else
+ _il_wr(il, HBUS_TARG_WRPTR,
+ txq->q.write_ptr | (txq_id << 8));
+ txq->need_update = 0;
+}
+EXPORT_SYMBOL(il_txq_update_write_ptr);
+
+/**
+ * il_tx_queue_unmap - Unmap any remaining DMA mappings and free skb's
+ */
+void il_tx_queue_unmap(struct il_priv *il, int txq_id)
+{
+ struct il_tx_queue *txq = &il->txq[txq_id];
+ struct il_queue *q = &txq->q;
+
+ if (q->n_bd == 0)
+ return;
+
+ while (q->write_ptr != q->read_ptr) {
+ il->cfg->ops->lib->txq_free_tfd(il, txq);
+ q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd);
+ }
+}
+EXPORT_SYMBOL(il_tx_queue_unmap);
+
+/**
+ * il_tx_queue_free - Deallocate DMA queue.
+ * @txq: Transmit queue to deallocate.
+ *
+ * Empty queue by removing and destroying all BD's.
+ * Free all buffers.
+ * 0-fill, but do not free "txq" descriptor structure.
+ */
+void il_tx_queue_free(struct il_priv *il, int txq_id)
+{
+ struct il_tx_queue *txq = &il->txq[txq_id];
+ struct device *dev = &il->pci_dev->dev;
+ int i;
+
+ il_tx_queue_unmap(il, txq_id);
+
+ /* De-alloc array of command/tx buffers */
+ for (i = 0; i < TFD_TX_CMD_SLOTS; i++)
+ kfree(txq->cmd[i]);
+
+ /* De-alloc circular buffer of TFDs */
+ if (txq->q.n_bd)
+ dma_free_coherent(dev, il->hw_params.tfd_size *
+ txq->q.n_bd, txq->tfds, txq->q.dma_addr);
+
+ /* De-alloc array of per-TFD driver data */
+ kfree(txq->txb);
+ txq->txb = NULL;
+
+ /* deallocate arrays */
+ kfree(txq->cmd);
+ kfree(txq->meta);
+ txq->cmd = NULL;
+ txq->meta = NULL;
+
+ /* 0-fill queue descriptor structure */
+ memset(txq, 0, sizeof(*txq));
+}
+EXPORT_SYMBOL(il_tx_queue_free);
+
+/**
+ * il_cmd_queue_unmap - Unmap any remaining DMA mappings from command queue
+ */
+void il_cmd_queue_unmap(struct il_priv *il)
+{
+ struct il_tx_queue *txq = &il->txq[il->cmd_queue];
+ struct il_queue *q = &txq->q;
+ int i;
+
+ if (q->n_bd == 0)
+ return;
+
+ while (q->read_ptr != q->write_ptr) {
+ i = il_get_cmd_idx(q, q->read_ptr, 0);
+
+ if (txq->meta[i].flags & CMD_MAPPED) {
+ pci_unmap_single(il->pci_dev,
+ dma_unmap_addr(&txq->meta[i], mapping),
+ dma_unmap_len(&txq->meta[i], len),
+ PCI_DMA_BIDIRECTIONAL);
+ txq->meta[i].flags = 0;
+ }
+
+ q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd);
+ }
+
+ i = q->n_win;
+ if (txq->meta[i].flags & CMD_MAPPED) {
+ pci_unmap_single(il->pci_dev,
+ dma_unmap_addr(&txq->meta[i], mapping),
+ dma_unmap_len(&txq->meta[i], len),
+ PCI_DMA_BIDIRECTIONAL);
+ txq->meta[i].flags = 0;
+ }
+}
+EXPORT_SYMBOL(il_cmd_queue_unmap);
+
+/**
+ * il_cmd_queue_free - Deallocate DMA queue.
+ * @txq: Transmit queue to deallocate.
+ *
+ * Empty queue by removing and destroying all BD's.
+ * Free all buffers.
+ * 0-fill, but do not free "txq" descriptor structure.
+ */
+void il_cmd_queue_free(struct il_priv *il)
+{
+ struct il_tx_queue *txq = &il->txq[il->cmd_queue];
+ struct device *dev = &il->pci_dev->dev;
+ int i;
+
+ il_cmd_queue_unmap(il);
+
+ /* De-alloc array of command/tx buffers */
+ for (i = 0; i <= TFD_CMD_SLOTS; i++)
+ kfree(txq->cmd[i]);
+
+ /* De-alloc circular buffer of TFDs */
+ if (txq->q.n_bd)
+ dma_free_coherent(dev, il->hw_params.tfd_size * txq->q.n_bd,
+ txq->tfds, txq->q.dma_addr);
+
+ /* deallocate arrays */
+ kfree(txq->cmd);
+ kfree(txq->meta);
+ txq->cmd = NULL;
+ txq->meta = NULL;
+
+ /* 0-fill queue descriptor structure */
+ memset(txq, 0, sizeof(*txq));
+}
+EXPORT_SYMBOL(il_cmd_queue_free);
+
+/*************** DMA-QUEUE-GENERAL-FUNCTIONS *****
+ * DMA services
+ *
+ * Theory of operation
+ *
+ * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer
+ * of buffer descriptors, each of which points to one or more data buffers for
+ * the device to read from or fill. Driver and device exchange status of each
+ * queue via "read" and "write" pointers. Driver keeps minimum of 2 empty
+ * entries in each circular buffer, to protect against confusing empty and full
+ * queue states.
+ *
+ * The device reads or writes the data in the queues via the device's several
+ * DMA/FIFO channels. Each queue is mapped to a single DMA channel.
+ *
+ * For Tx queue, there are low mark and high mark limits. If, after queuing
+ * the packet for Tx, free space become < low mark, Tx queue stopped. When
+ * reclaiming packets (on 'tx done IRQ), if free space become > high mark,
+ * Tx queue resumed.
+ *
+ * See more detailed info in 4965.h.
+ ***************************************************/
+
+int il_queue_space(const struct il_queue *q)
+{
+ int s = q->read_ptr - q->write_ptr;
+
+ if (q->read_ptr > q->write_ptr)
+ s -= q->n_bd;
+
+ if (s <= 0)
+ s += q->n_win;
+ /* keep some reserve to not confuse empty and full situations */
+ s -= 2;
+ if (s < 0)
+ s = 0;
+ return s;
+}
+EXPORT_SYMBOL(il_queue_space);
+
+
+/**
+ * il_queue_init - Initialize queue's high/low-water and read/write idxes
+ */
+static int il_queue_init(struct il_priv *il, struct il_queue *q,
+ int count, int slots_num, u32 id)
+{
+ q->n_bd = count;
+ q->n_win = slots_num;
+ q->id = id;
+
+ /* count must be power-of-two size, otherwise il_queue_inc_wrap
+ * and il_queue_dec_wrap are broken. */
+ BUG_ON(!is_power_of_2(count));
+
+ /* slots_num must be power-of-two size, otherwise
+ * il_get_cmd_idx is broken. */
+ BUG_ON(!is_power_of_2(slots_num));
+
+ q->low_mark = q->n_win / 4;
+ if (q->low_mark < 4)
+ q->low_mark = 4;
+
+ q->high_mark = q->n_win / 8;
+ if (q->high_mark < 2)
+ q->high_mark = 2;
+
+ q->write_ptr = q->read_ptr = 0;
+
+ return 0;
+}
+
+/**
+ * il_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue
+ */
+static int il_tx_queue_alloc(struct il_priv *il,
+ struct il_tx_queue *txq, u32 id)
+{
+ struct device *dev = &il->pci_dev->dev;
+ size_t tfd_sz = il->hw_params.tfd_size * TFD_QUEUE_SIZE_MAX;
+
+ /* Driver ilate data, only for Tx (not command) queues,
+ * not shared with device. */
+ if (id != il->cmd_queue) {
+ txq->txb = kzalloc(sizeof(txq->txb[0]) *
+ TFD_QUEUE_SIZE_MAX, GFP_KERNEL);
+ if (!txq->txb) {
+ IL_ERR("kmalloc for auxiliary BD "
+ "structures failed\n");
+ goto error;
+ }
+ } else {
+ txq->txb = NULL;
+ }
+
+ /* Circular buffer of transmit frame descriptors (TFDs),
+ * shared with device */
+ txq->tfds = dma_alloc_coherent(dev, tfd_sz, &txq->q.dma_addr,
+ GFP_KERNEL);
+ if (!txq->tfds) {
+ IL_ERR("pci_alloc_consistent(%zd) failed\n", tfd_sz);
+ goto error;
+ }
+ txq->q.id = id;
+
+ return 0;
+
+ error:
+ kfree(txq->txb);
+ txq->txb = NULL;
+
+ return -ENOMEM;
+}
+
+/**
+ * il_tx_queue_init - Allocate and initialize one tx/cmd queue
+ */
+int il_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq,
+ int slots_num, u32 txq_id)
+{
+ int i, len;
+ int ret;
+ int actual_slots = slots_num;
+
+ /*
+ * Alloc buffer array for commands (Tx or other types of commands).
+ * For the command queue (#4/#9), allocate command space + one big
+ * command for scan, since scan command is very huge; the system will
+ * not have two scans at the same time, so only one is needed.
+ * For normal Tx queues (all other queues), no super-size command
+ * space is needed.
+ */
+ if (txq_id == il->cmd_queue)
+ actual_slots++;
+
+ txq->meta = kzalloc(sizeof(struct il_cmd_meta) * actual_slots,
+ GFP_KERNEL);
+ txq->cmd = kzalloc(sizeof(struct il_device_cmd *) * actual_slots,
+ GFP_KERNEL);
+
+ if (!txq->meta || !txq->cmd)
+ goto out_free_arrays;
+
+ len = sizeof(struct il_device_cmd);
+ for (i = 0; i < actual_slots; i++) {
+ /* only happens for cmd queue */
+ if (i == slots_num)
+ len = IL_MAX_CMD_SIZE;
+
+ txq->cmd[i] = kmalloc(len, GFP_KERNEL);
+ if (!txq->cmd[i])
+ goto err;
+ }
+
+ /* Alloc driver data array and TFD circular buffer */
+ ret = il_tx_queue_alloc(il, txq, txq_id);
+ if (ret)
+ goto err;
+
+ txq->need_update = 0;
+
+ /*
+ * For the default queues 0-3, set up the swq_id
+ * already -- all others need to get one later
+ * (if they need one at all).
+ */
+ if (txq_id < 4)
+ il_set_swq_id(txq, txq_id, txq_id);
+
+ /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
+ * il_queue_inc_wrap and il_queue_dec_wrap are broken. */
+ BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1));
+
+ /* Initialize queue's high/low-water marks, and head/tail idxes */
+ il_queue_init(il, &txq->q,
+ TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
+
+ /* Tell device where to find queue */
+ il->cfg->ops->lib->txq_init(il, txq);
+
+ return 0;
+err:
+ for (i = 0; i < actual_slots; i++)
+ kfree(txq->cmd[i]);
+out_free_arrays:
+ kfree(txq->meta);
+ kfree(txq->cmd);
+
+ return -ENOMEM;
+}
+EXPORT_SYMBOL(il_tx_queue_init);
+
+void il_tx_queue_reset(struct il_priv *il, struct il_tx_queue *txq,
+ int slots_num, u32 txq_id)
+{
+ int actual_slots = slots_num;
+
+ if (txq_id == il->cmd_queue)
+ actual_slots++;
+
+ memset(txq->meta, 0, sizeof(struct il_cmd_meta) * actual_slots);
+
+ txq->need_update = 0;
+
+ /* Initialize queue's high/low-water marks, and head/tail idxes */
+ il_queue_init(il, &txq->q,
+ TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
+
+ /* Tell device where to find queue */
+ il->cfg->ops->lib->txq_init(il, txq);
+}
+EXPORT_SYMBOL(il_tx_queue_reset);
+
+/*************** HOST COMMAND QUEUE FUNCTIONS *****/
+
+/**
+ * il_enqueue_hcmd - enqueue a uCode command
+ * @il: device ilate data point
+ * @cmd: a point to the ucode command structure
+ *
+ * The function returns < 0 values to indicate the operation is
+ * failed. On success, it turns the idx (> 0) of command in the
+ * command queue.
+ */
+int il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd)
+{
+ struct il_tx_queue *txq = &il->txq[il->cmd_queue];
+ struct il_queue *q = &txq->q;
+ struct il_device_cmd *out_cmd;
+ struct il_cmd_meta *out_meta;
+ dma_addr_t phys_addr;
+ unsigned long flags;
+ int len;
+ u32 idx;
+ u16 fix_size;
+
+ cmd->len = il->cfg->ops->utils->get_hcmd_size(cmd->id, cmd->len);
+ fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr));
+
+ /* If any of the command structures end up being larger than
+ * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
+ * we will need to increase the size of the TFD entries
+ * Also, check to see if command buffer should not exceed the size
+ * of device_cmd and max_cmd_size. */
+ BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
+ !(cmd->flags & CMD_SIZE_HUGE));
+ BUG_ON(fix_size > IL_MAX_CMD_SIZE);
+
+ if (il_is_rfkill(il) || il_is_ctkill(il)) {
+ IL_WARN("Not sending command - %s KILL\n",
+ il_is_rfkill(il) ? "RF" : "CT");
+ return -EIO;
+ }
+
+ spin_lock_irqsave(&il->hcmd_lock, flags);
+
+ if (il_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
+ spin_unlock_irqrestore(&il->hcmd_lock, flags);
+
+ IL_ERR("Restarting adapter due to command queue full\n");
+ queue_work(il->workqueue, &il->restart);
+ return -ENOSPC;
+ }
+
+ idx = il_get_cmd_idx(q, q->write_ptr, cmd->flags & CMD_SIZE_HUGE);
+ out_cmd = txq->cmd[idx];
+ out_meta = &txq->meta[idx];
+
+ if (WARN_ON(out_meta->flags & CMD_MAPPED)) {
+ spin_unlock_irqrestore(&il->hcmd_lock, flags);
+ return -ENOSPC;
+ }
+
+ memset(out_meta, 0, sizeof(*out_meta)); /* re-initialize to NULL */
+ out_meta->flags = cmd->flags | CMD_MAPPED;
+ if (cmd->flags & CMD_WANT_SKB)
+ out_meta->source = cmd;
+ if (cmd->flags & CMD_ASYNC)
+ out_meta->callback = cmd->callback;
+
+ out_cmd->hdr.cmd = cmd->id;
+ memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len);
+
+ /* At this point, the out_cmd now has all of the incoming cmd
+ * information */
+
+ out_cmd->hdr.flags = 0;
+ out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(il->cmd_queue) |
+ IDX_TO_SEQ(q->write_ptr));
+ if (cmd->flags & CMD_SIZE_HUGE)
+ out_cmd->hdr.sequence |= SEQ_HUGE_FRAME;
+ len = sizeof(struct il_device_cmd);
+ if (idx == TFD_CMD_SLOTS)
+ len = IL_MAX_CMD_SIZE;
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+ switch (out_cmd->hdr.cmd) {
+ case C_TX_LINK_QUALITY_CMD:
+ case C_SENSITIVITY:
+ D_HC_DUMP(
+ "Sending command %s (#%x), seq: 0x%04X, "
+ "%d bytes at %d[%d]:%d\n",
+ il_get_cmd_string(out_cmd->hdr.cmd),
+ out_cmd->hdr.cmd,
+ le16_to_cpu(out_cmd->hdr.sequence), fix_size,
+ q->write_ptr, idx, il->cmd_queue);
+ break;
+ default:
+ D_HC("Sending command %s (#%x), seq: 0x%04X, "
+ "%d bytes at %d[%d]:%d\n",
+ il_get_cmd_string(out_cmd->hdr.cmd),
+ out_cmd->hdr.cmd,
+ le16_to_cpu(out_cmd->hdr.sequence), fix_size,
+ q->write_ptr, idx, il->cmd_queue);
+ }
+#endif
+ txq->need_update = 1;
+
+ if (il->cfg->ops->lib->txq_update_byte_cnt_tbl)
+ /* Set up entry in queue's byte count circular buffer */
+ il->cfg->ops->lib->txq_update_byte_cnt_tbl(il, txq, 0);
+
+ phys_addr = pci_map_single(il->pci_dev, &out_cmd->hdr,
+ fix_size, PCI_DMA_BIDIRECTIONAL);
+ dma_unmap_addr_set(out_meta, mapping, phys_addr);
+ dma_unmap_len_set(out_meta, len, fix_size);
+
+ il->cfg->ops->lib->txq_attach_buf_to_tfd(il, txq,
+ phys_addr, fix_size, 1,
+ U32_PAD(cmd->len));
+
+ /* Increment and update queue's write idx */
+ q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
+ il_txq_update_write_ptr(il, txq);
+
+ spin_unlock_irqrestore(&il->hcmd_lock, flags);
+ return idx;
+}
+
+/**
+ * il_hcmd_queue_reclaim - Reclaim TX command queue entries already Tx'd
+ *
+ * When FW advances 'R' idx, all entries between old and new 'R' idx
+ * need to be reclaimed. As result, some free space forms. If there is
+ * enough free space (> low mark), wake the stack that feeds us.
+ */
+static void il_hcmd_queue_reclaim(struct il_priv *il, int txq_id,
+ int idx, int cmd_idx)
+{
+ struct il_tx_queue *txq = &il->txq[txq_id];
+ struct il_queue *q = &txq->q;
+ int nfreed = 0;
+
+ if (idx >= q->n_bd || il_queue_used(q, idx) == 0) {
+ IL_ERR("Read idx for DMA queue txq id (%d), idx %d, "
+ "is out of range [0-%d] %d %d.\n", txq_id,
+ idx, q->n_bd, q->write_ptr, q->read_ptr);
+ return;
+ }
+
+ for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
+ q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {
+
+ if (nfreed++ > 0) {
+ IL_ERR("HCMD skipped: idx (%d) %d %d\n", idx,
+ q->write_ptr, q->read_ptr);
+ queue_work(il->workqueue, &il->restart);
+ }
+
+ }
+}
+
+/**
+ * il_tx_cmd_complete - Pull unused buffers off the queue and reclaim them
+ * @rxb: Rx buffer to reclaim
+ *
+ * If an Rx buffer has an async callback associated with it the callback
+ * will be executed. The attached skb (if present) will only be freed
+ * if the callback returns 1
+ */
+void
+il_tx_cmd_complete(struct il_priv *il, struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ u16 sequence = le16_to_cpu(pkt->hdr.sequence);
+ int txq_id = SEQ_TO_QUEUE(sequence);
+ int idx = SEQ_TO_IDX(sequence);
+ int cmd_idx;
+ bool huge = !!(pkt->hdr.sequence & SEQ_HUGE_FRAME);
+ struct il_device_cmd *cmd;
+ struct il_cmd_meta *meta;
+ struct il_tx_queue *txq = &il->txq[il->cmd_queue];
+ unsigned long flags;
+
+ /* If a Tx command is being handled and it isn't in the actual
+ * command queue then there a command routing bug has been introduced
+ * in the queue management code. */
+ if (WARN(txq_id != il->cmd_queue,
+ "wrong command queue %d (should be %d), sequence 0x%X readp=%d writep=%d\n",
+ txq_id, il->cmd_queue, sequence,
+ il->txq[il->cmd_queue].q.read_ptr,
+ il->txq[il->cmd_queue].q.write_ptr)) {
+ il_print_hex_error(il, pkt, 32);
+ return;
+ }
+
+ cmd_idx = il_get_cmd_idx(&txq->q, idx, huge);
+ cmd = txq->cmd[cmd_idx];
+ meta = &txq->meta[cmd_idx];
+
+ txq->time_stamp = jiffies;
+
+ pci_unmap_single(il->pci_dev,
+ dma_unmap_addr(meta, mapping),
+ dma_unmap_len(meta, len),
+ PCI_DMA_BIDIRECTIONAL);
+
+ /* Input error checking is done when commands are added to queue. */
+ if (meta->flags & CMD_WANT_SKB) {
+ meta->source->reply_page = (unsigned long)rxb_addr(rxb);
+ rxb->page = NULL;
+ } else if (meta->callback)
+ meta->callback(il, cmd, pkt);
+
+ spin_lock_irqsave(&il->hcmd_lock, flags);
+
+ il_hcmd_queue_reclaim(il, txq_id, idx, cmd_idx);
+
+ if (!(meta->flags & CMD_ASYNC)) {
+ clear_bit(S_HCMD_ACTIVE, &il->status);
+ D_INFO("Clearing HCMD_ACTIVE for command %s\n",
+ il_get_cmd_string(cmd->hdr.cmd));
+ wake_up(&il->wait_command_queue);
+ }
+
+ /* Mark as unmapped */
+ meta->flags = 0;
+
+ spin_unlock_irqrestore(&il->hcmd_lock, flags);
+}
+EXPORT_SYMBOL(il_tx_cmd_complete);
MODULE_DESCRIPTION("iwl-legacy: common functions for 3945 and 4965");
MODULE_VERSION(IWLWIFI_VERSION);
diff --git a/drivers/net/wireless/iwlegacy/iwl-eeprom.c b/drivers/net/wireless/iwlegacy/iwl-eeprom.c
deleted file mode 100644
index ee5ad69..0000000
--- a/drivers/net/wireless/iwlegacy/iwl-eeprom.c
+++ /dev/null
@@ -1,553 +0,0 @@
-/******************************************************************************
- *
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@xxxxxxxxxxxxxxx>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- * BSD LICENSE
- *
- * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *****************************************************************************/
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-
-#include <net/mac80211.h>
-
-#include "iwl-commands.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-debug.h"
-#include "iwl-eeprom.h"
-#include "iwl-io.h"
-
-/************************** EEPROM BANDS ****************************
- *
- * The il_eeprom_band definitions below provide the mapping from the
- * EEPROM contents to the specific channel number supported for each
- * band.
- *
- * For example, il_priv->eeprom.band_3_channels[4] from the band_3
- * definition below maps to physical channel 42 in the 5.2GHz spectrum.
- * The specific geography and calibration information for that channel
- * is contained in the eeprom map itself.
- *
- * During init, we copy the eeprom information and channel map
- * information into il->channel_info_24/52 and il->channel_map_24/52
- *
- * channel_map_24/52 provides the idx in the channel_info array for a
- * given channel. We have to have two separate maps as there is channel
- * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
- * band_2
- *
- * A value of 0xff stored in the channel_map indicates that the channel
- * is not supported by the hardware at all.
- *
- * A value of 0xfe in the channel_map indicates that the channel is not
- * valid for Tx with the current hardware. This means that
- * while the system can tune and receive on a given channel, it may not
- * be able to associate or transmit any frames on that
- * channel. There is no corresponding channel information for that
- * entry.
- *
- *********************************************************************/
-
-/* 2.4 GHz */
-const u8 il_eeprom_band_1[14] = {
- 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
-};
-
-/* 5.2 GHz bands */
-static const u8 il_eeprom_band_2[] = { /* 4915-5080MHz */
- 183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
-};
-
-static const u8 il_eeprom_band_3[] = { /* 5170-5320MHz */
- 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
-};
-
-static const u8 il_eeprom_band_4[] = { /* 5500-5700MHz */
- 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
-};
-
-static const u8 il_eeprom_band_5[] = { /* 5725-5825MHz */
- 145, 149, 153, 157, 161, 165
-};
-
-static const u8 il_eeprom_band_6[] = { /* 2.4 ht40 channel */
- 1, 2, 3, 4, 5, 6, 7
-};
-
-static const u8 il_eeprom_band_7[] = { /* 5.2 ht40 channel */
- 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
-};
-
-/******************************************************************************
- *
- * EEPROM related functions
- *
-******************************************************************************/
-
-static int il_eeprom_verify_signature(struct il_priv *il)
-{
- u32 gp = _il_rd(il, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK;
- int ret = 0;
-
- D_EEPROM("EEPROM signature=0x%08x\n", gp);
- switch (gp) {
- case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K:
- case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K:
- break;
- default:
- IL_ERR("bad EEPROM signature,"
- "EEPROM_GP=0x%08x\n", gp);
- ret = -ENOENT;
- break;
- }
- return ret;
-}
-
-const u8
-*il_eeprom_query_addr(const struct il_priv *il, size_t offset)
-{
- BUG_ON(offset >= il->cfg->base_params->eeprom_size);
- return &il->eeprom[offset];
-}
-EXPORT_SYMBOL(il_eeprom_query_addr);
-
-u16 il_eeprom_query16(const struct il_priv *il, size_t offset)
-{
- if (!il->eeprom)
- return 0;
- return (u16)il->eeprom[offset] | ((u16)il->eeprom[offset + 1] << 8);
-}
-EXPORT_SYMBOL(il_eeprom_query16);
-
-/**
- * il_eeprom_init - read EEPROM contents
- *
- * Load the EEPROM contents from adapter into il->eeprom
- *
- * NOTE: This routine uses the non-debug IO access functions.
- */
-int il_eeprom_init(struct il_priv *il)
-{
- __le16 *e;
- u32 gp = _il_rd(il, CSR_EEPROM_GP);
- int sz;
- int ret;
- u16 addr;
-
- /* allocate eeprom */
- sz = il->cfg->base_params->eeprom_size;
- D_EEPROM("NVM size = %d\n", sz);
- il->eeprom = kzalloc(sz, GFP_KERNEL);
- if (!il->eeprom) {
- ret = -ENOMEM;
- goto alloc_err;
- }
- e = (__le16 *)il->eeprom;
-
- il->cfg->ops->lib->apm_ops.init(il);
-
- ret = il_eeprom_verify_signature(il);
- if (ret < 0) {
- IL_ERR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
- ret = -ENOENT;
- goto err;
- }
-
- /* Make sure driver (instead of uCode) is allowed to read EEPROM */
- ret = il->cfg->ops->lib->eeprom_ops.acquire_semaphore(il);
- if (ret < 0) {
- IL_ERR("Failed to acquire EEPROM semaphore.\n");
- ret = -ENOENT;
- goto err;
- }
-
- /* eeprom is an array of 16bit values */
- for (addr = 0; addr < sz; addr += sizeof(u16)) {
- u32 r;
-
- _il_wr(il, CSR_EEPROM_REG,
- CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
-
- ret = _il_poll_bit(il, CSR_EEPROM_REG,
- CSR_EEPROM_REG_READ_VALID_MSK,
- CSR_EEPROM_REG_READ_VALID_MSK,
- IL_EEPROM_ACCESS_TIMEOUT);
- if (ret < 0) {
- IL_ERR("Time out reading EEPROM[%d]\n",
- addr);
- goto done;
- }
- r = _il_rd(il, CSR_EEPROM_REG);
- e[addr / 2] = cpu_to_le16(r >> 16);
- }
-
- D_EEPROM("NVM Type: %s, version: 0x%x\n",
- "EEPROM",
- il_eeprom_query16(il, EEPROM_VERSION));
-
- ret = 0;
-done:
- il->cfg->ops->lib->eeprom_ops.release_semaphore(il);
-
-err:
- if (ret)
- il_eeprom_free(il);
- /* Reset chip to save power until we load uCode during "up". */
- il_apm_stop(il);
-alloc_err:
- return ret;
-}
-EXPORT_SYMBOL(il_eeprom_init);
-
-void il_eeprom_free(struct il_priv *il)
-{
- kfree(il->eeprom);
- il->eeprom = NULL;
-}
-EXPORT_SYMBOL(il_eeprom_free);
-
-static void il_init_band_reference(const struct il_priv *il,
- int eep_band, int *eeprom_ch_count,
- const struct il_eeprom_channel **eeprom_ch_info,
- const u8 **eeprom_ch_idx)
-{
- u32 offset = il->cfg->ops->lib->
- eeprom_ops.regulatory_bands[eep_band - 1];
- switch (eep_band) {
- case 1: /* 2.4GHz band */
- *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_1);
- *eeprom_ch_info = (struct il_eeprom_channel *)
- il_eeprom_query_addr(il, offset);
- *eeprom_ch_idx = il_eeprom_band_1;
- break;
- case 2: /* 4.9GHz band */
- *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_2);
- *eeprom_ch_info = (struct il_eeprom_channel *)
- il_eeprom_query_addr(il, offset);
- *eeprom_ch_idx = il_eeprom_band_2;
- break;
- case 3: /* 5.2GHz band */
- *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_3);
- *eeprom_ch_info = (struct il_eeprom_channel *)
- il_eeprom_query_addr(il, offset);
- *eeprom_ch_idx = il_eeprom_band_3;
- break;
- case 4: /* 5.5GHz band */
- *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_4);
- *eeprom_ch_info = (struct il_eeprom_channel *)
- il_eeprom_query_addr(il, offset);
- *eeprom_ch_idx = il_eeprom_band_4;
- break;
- case 5: /* 5.7GHz band */
- *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_5);
- *eeprom_ch_info = (struct il_eeprom_channel *)
- il_eeprom_query_addr(il, offset);
- *eeprom_ch_idx = il_eeprom_band_5;
- break;
- case 6: /* 2.4GHz ht40 channels */
- *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_6);
- *eeprom_ch_info = (struct il_eeprom_channel *)
- il_eeprom_query_addr(il, offset);
- *eeprom_ch_idx = il_eeprom_band_6;
- break;
- case 7: /* 5 GHz ht40 channels */
- *eeprom_ch_count = ARRAY_SIZE(il_eeprom_band_7);
- *eeprom_ch_info = (struct il_eeprom_channel *)
- il_eeprom_query_addr(il, offset);
- *eeprom_ch_idx = il_eeprom_band_7;
- break;
- default:
- BUG();
- }
-}
-
-#define CHECK_AND_PRINT(x) ((eeprom_ch->flags & EEPROM_CHANNEL_##x) \
- ? # x " " : "")
-/**
- * il_mod_ht40_chan_info - Copy ht40 channel info into driver's il.
- *
- * Does not set up a command, or touch hardware.
- */
-static int il_mod_ht40_chan_info(struct il_priv *il,
- enum ieee80211_band band, u16 channel,
- const struct il_eeprom_channel *eeprom_ch,
- u8 clear_ht40_extension_channel)
-{
- struct il_channel_info *ch_info;
-
- ch_info = (struct il_channel_info *)
- il_get_channel_info(il, band, channel);
-
- if (!il_is_channel_valid(ch_info))
- return -1;
-
- D_EEPROM("HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm):"
- " Ad-Hoc %ssupported\n",
- ch_info->channel,
- il_is_channel_a_band(ch_info) ?
- "5.2" : "2.4",
- CHECK_AND_PRINT(IBSS),
- CHECK_AND_PRINT(ACTIVE),
- CHECK_AND_PRINT(RADAR),
- CHECK_AND_PRINT(WIDE),
- CHECK_AND_PRINT(DFS),
- eeprom_ch->flags,
- eeprom_ch->max_power_avg,
- ((eeprom_ch->flags & EEPROM_CHANNEL_IBSS)
- && !(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ?
- "" : "not ");
-
- ch_info->ht40_eeprom = *eeprom_ch;
- ch_info->ht40_max_power_avg = eeprom_ch->max_power_avg;
- ch_info->ht40_flags = eeprom_ch->flags;
- if (eeprom_ch->flags & EEPROM_CHANNEL_VALID)
- ch_info->ht40_extension_channel &=
- ~clear_ht40_extension_channel;
-
- return 0;
-}
-
-#define CHECK_AND_PRINT_I(x) ((eeprom_ch_info[ch].flags & EEPROM_CHANNEL_##x) \
- ? # x " " : "")
-
-/**
- * il_init_channel_map - Set up driver's info for all possible channels
- */
-int il_init_channel_map(struct il_priv *il)
-{
- int eeprom_ch_count = 0;
- const u8 *eeprom_ch_idx = NULL;
- const struct il_eeprom_channel *eeprom_ch_info = NULL;
- int band, ch;
- struct il_channel_info *ch_info;
-
- if (il->channel_count) {
- D_EEPROM("Channel map already initialized.\n");
- return 0;
- }
-
- D_EEPROM("Initializing regulatory info from EEPROM\n");
-
- il->channel_count =
- ARRAY_SIZE(il_eeprom_band_1) +
- ARRAY_SIZE(il_eeprom_band_2) +
- ARRAY_SIZE(il_eeprom_band_3) +
- ARRAY_SIZE(il_eeprom_band_4) +
- ARRAY_SIZE(il_eeprom_band_5);
-
- D_EEPROM("Parsing data for %d channels.\n",
- il->channel_count);
-
- il->channel_info = kzalloc(sizeof(struct il_channel_info) *
- il->channel_count, GFP_KERNEL);
- if (!il->channel_info) {
- IL_ERR("Could not allocate channel_info\n");
- il->channel_count = 0;
- return -ENOMEM;
- }
-
- ch_info = il->channel_info;
-
- /* Loop through the 5 EEPROM bands adding them in order to the
- * channel map we maintain (that contains additional information than
- * what just in the EEPROM) */
- for (band = 1; band <= 5; band++) {
-
- il_init_band_reference(il, band, &eeprom_ch_count,
- &eeprom_ch_info, &eeprom_ch_idx);
-
- /* Loop through each band adding each of the channels */
- for (ch = 0; ch < eeprom_ch_count; ch++) {
- ch_info->channel = eeprom_ch_idx[ch];
- ch_info->band = (band == 1) ? IEEE80211_BAND_2GHZ :
- IEEE80211_BAND_5GHZ;
-
- /* permanently store EEPROM's channel regulatory flags
- * and max power in channel info database. */
- ch_info->eeprom = eeprom_ch_info[ch];
-
- /* Copy the run-time flags so they are there even on
- * invalid channels */
- ch_info->flags = eeprom_ch_info[ch].flags;
- /* First write that ht40 is not enabled, and then enable
- * one by one */
- ch_info->ht40_extension_channel =
- IEEE80211_CHAN_NO_HT40;
-
- if (!(il_is_channel_valid(ch_info))) {
- D_EEPROM(
- "Ch. %d Flags %x [%sGHz] - "
- "No traffic\n",
- ch_info->channel,
- ch_info->flags,
- il_is_channel_a_band(ch_info) ?
- "5.2" : "2.4");
- ch_info++;
- continue;
- }
-
- /* Initialize regulatory-based run-time data */
- ch_info->max_power_avg = ch_info->curr_txpow =
- eeprom_ch_info[ch].max_power_avg;
- ch_info->scan_power = eeprom_ch_info[ch].max_power_avg;
- ch_info->min_power = 0;
-
- D_EEPROM("Ch. %d [%sGHz] "
- "%s%s%s%s%s%s(0x%02x %ddBm):"
- " Ad-Hoc %ssupported\n",
- ch_info->channel,
- il_is_channel_a_band(ch_info) ?
- "5.2" : "2.4",
- CHECK_AND_PRINT_I(VALID),
- CHECK_AND_PRINT_I(IBSS),
- CHECK_AND_PRINT_I(ACTIVE),
- CHECK_AND_PRINT_I(RADAR),
- CHECK_AND_PRINT_I(WIDE),
- CHECK_AND_PRINT_I(DFS),
- eeprom_ch_info[ch].flags,
- eeprom_ch_info[ch].max_power_avg,
- ((eeprom_ch_info[ch].
- flags & EEPROM_CHANNEL_IBSS)
- && !(eeprom_ch_info[ch].
- flags & EEPROM_CHANNEL_RADAR))
- ? "" : "not ");
-
- ch_info++;
- }
- }
-
- /* Check if we do have HT40 channels */
- if (il->cfg->ops->lib->eeprom_ops.regulatory_bands[5] ==
- EEPROM_REGULATORY_BAND_NO_HT40 &&
- il->cfg->ops->lib->eeprom_ops.regulatory_bands[6] ==
- EEPROM_REGULATORY_BAND_NO_HT40)
- return 0;
-
- /* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */
- for (band = 6; band <= 7; band++) {
- enum ieee80211_band ieeeband;
-
- il_init_band_reference(il, band, &eeprom_ch_count,
- &eeprom_ch_info, &eeprom_ch_idx);
-
- /* EEPROM band 6 is 2.4, band 7 is 5 GHz */
- ieeeband =
- (band == 6) ? IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
-
- /* Loop through each band adding each of the channels */
- for (ch = 0; ch < eeprom_ch_count; ch++) {
- /* Set up driver's info for lower half */
- il_mod_ht40_chan_info(il, ieeeband,
- eeprom_ch_idx[ch],
- &eeprom_ch_info[ch],
- IEEE80211_CHAN_NO_HT40PLUS);
-
- /* Set up driver's info for upper half */
- il_mod_ht40_chan_info(il, ieeeband,
- eeprom_ch_idx[ch] + 4,
- &eeprom_ch_info[ch],
- IEEE80211_CHAN_NO_HT40MINUS);
- }
- }
-
- return 0;
-}
-EXPORT_SYMBOL(il_init_channel_map);
-
-/*
- * il_free_channel_map - undo allocations in il_init_channel_map
- */
-void il_free_channel_map(struct il_priv *il)
-{
- kfree(il->channel_info);
- il->channel_count = 0;
-}
-EXPORT_SYMBOL(il_free_channel_map);
-
-/**
- * il_get_channel_info - Find driver's ilate channel info
- *
- * Based on band and channel number.
- */
-const struct
-il_channel_info *il_get_channel_info(const struct il_priv *il,
- enum ieee80211_band band, u16 channel)
-{
- int i;
-
- switch (band) {
- case IEEE80211_BAND_5GHZ:
- for (i = 14; i < il->channel_count; i++) {
- if (il->channel_info[i].channel == channel)
- return &il->channel_info[i];
- }
- break;
- case IEEE80211_BAND_2GHZ:
- if (channel >= 1 && channel <= 14)
- return &il->channel_info[channel - 1];
- break;
- default:
- BUG();
- }
-
- return NULL;
-}
-EXPORT_SYMBOL(il_get_channel_info);
diff --git a/drivers/net/wireless/iwlegacy/iwl-hcmd.c b/drivers/net/wireless/iwlegacy/iwl-hcmd.c
deleted file mode 100644
index 670a398..0000000
--- a/drivers/net/wireless/iwlegacy/iwl-hcmd.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@xxxxxxxxxxxxxxx>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <net/mac80211.h>
-
-#include "iwl-dev.h"
-#include "iwl-debug.h"
-#include "iwl-eeprom.h"
-#include "iwl-core.h"
-
-
-const char *il_get_cmd_string(u8 cmd)
-{
- switch (cmd) {
- IL_CMD(N_ALIVE);
- IL_CMD(N_ERROR);
- IL_CMD(C_RXON);
- IL_CMD(C_RXON_ASSOC);
- IL_CMD(C_QOS_PARAM);
- IL_CMD(C_RXON_TIMING);
- IL_CMD(C_ADD_STA);
- IL_CMD(C_REM_STA);
- IL_CMD(C_WEPKEY);
- IL_CMD(N_3945_RX);
- IL_CMD(C_TX);
- IL_CMD(C_RATE_SCALE);
- IL_CMD(C_LEDS);
- IL_CMD(C_TX_LINK_QUALITY_CMD);
- IL_CMD(C_CHANNEL_SWITCH);
- IL_CMD(N_CHANNEL_SWITCH);
- IL_CMD(C_SPECTRUM_MEASUREMENT);
- IL_CMD(N_SPECTRUM_MEASUREMENT);
- IL_CMD(C_POWER_TBL);
- IL_CMD(N_PM_SLEEP);
- IL_CMD(N_PM_DEBUG_STATS);
- IL_CMD(C_SCAN);
- IL_CMD(C_SCAN_ABORT);
- IL_CMD(N_SCAN_START);
- IL_CMD(N_SCAN_RESULTS);
- IL_CMD(N_SCAN_COMPLETE);
- IL_CMD(N_BEACON);
- IL_CMD(C_TX_BEACON);
- IL_CMD(C_TX_PWR_TBL);
- IL_CMD(C_BT_CONFIG);
- IL_CMD(C_STATS);
- IL_CMD(N_STATS);
- IL_CMD(N_CARD_STATE);
- IL_CMD(N_MISSED_BEACONS);
- IL_CMD(C_CT_KILL_CONFIG);
- IL_CMD(C_SENSITIVITY);
- IL_CMD(C_PHY_CALIBRATION);
- IL_CMD(N_RX_PHY);
- IL_CMD(N_RX_MPDU);
- IL_CMD(N_RX);
- IL_CMD(N_COMPRESSED_BA);
- default:
- return "UNKNOWN";
-
- }
-}
-EXPORT_SYMBOL(il_get_cmd_string);
-
-#define HOST_COMPLETE_TIMEOUT (HZ / 2)
-
-static void il_generic_cmd_callback(struct il_priv *il,
- struct il_device_cmd *cmd,
- struct il_rx_pkt *pkt)
-{
- if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
- IL_ERR("Bad return from %s (0x%08X)\n",
- il_get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
- return;
- }
-
-#ifdef CONFIG_IWLEGACY_DEBUG
- switch (cmd->hdr.cmd) {
- case C_TX_LINK_QUALITY_CMD:
- case C_SENSITIVITY:
- D_HC_DUMP("back from %s (0x%08X)\n",
- il_get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
- break;
- default:
- D_HC("back from %s (0x%08X)\n",
- il_get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
- }
-#endif
-}
-
-static int
-il_send_cmd_async(struct il_priv *il, struct il_host_cmd *cmd)
-{
- int ret;
-
- BUG_ON(!(cmd->flags & CMD_ASYNC));
-
- /* An asynchronous command can not expect an SKB to be set. */
- BUG_ON(cmd->flags & CMD_WANT_SKB);
-
- /* Assign a generic callback if one is not provided */
- if (!cmd->callback)
- cmd->callback = il_generic_cmd_callback;
-
- if (test_bit(S_EXIT_PENDING, &il->status))
- return -EBUSY;
-
- ret = il_enqueue_hcmd(il, cmd);
- if (ret < 0) {
- IL_ERR("Error sending %s: enqueue_hcmd failed: %d\n",
- il_get_cmd_string(cmd->id), ret);
- return ret;
- }
- return 0;
-}
-
-int il_send_cmd_sync(struct il_priv *il, struct il_host_cmd *cmd)
-{
- int cmd_idx;
- int ret;
-
- lockdep_assert_held(&il->mutex);
-
- BUG_ON(cmd->flags & CMD_ASYNC);
-
- /* A synchronous command can not have a callback set. */
- BUG_ON(cmd->callback);
-
- D_INFO("Attempting to send sync command %s\n",
- il_get_cmd_string(cmd->id));
-
- set_bit(S_HCMD_ACTIVE, &il->status);
- D_INFO("Setting HCMD_ACTIVE for command %s\n",
- il_get_cmd_string(cmd->id));
-
- cmd_idx = il_enqueue_hcmd(il, cmd);
- if (cmd_idx < 0) {
- ret = cmd_idx;
- IL_ERR("Error sending %s: enqueue_hcmd failed: %d\n",
- il_get_cmd_string(cmd->id), ret);
- goto out;
- }
-
- ret = wait_event_timeout(il->wait_command_queue,
- !test_bit(S_HCMD_ACTIVE, &il->status),
- HOST_COMPLETE_TIMEOUT);
- if (!ret) {
- if (test_bit(S_HCMD_ACTIVE, &il->status)) {
- IL_ERR(
- "Error sending %s: time out after %dms.\n",
- il_get_cmd_string(cmd->id),
- jiffies_to_msecs(HOST_COMPLETE_TIMEOUT));
-
- clear_bit(S_HCMD_ACTIVE, &il->status);
- D_INFO(
- "Clearing HCMD_ACTIVE for command %s\n",
- il_get_cmd_string(cmd->id));
- ret = -ETIMEDOUT;
- goto cancel;
- }
- }
-
- if (test_bit(S_RF_KILL_HW, &il->status)) {
- IL_ERR("Command %s aborted: RF KILL Switch\n",
- il_get_cmd_string(cmd->id));
- ret = -ECANCELED;
- goto fail;
- }
- if (test_bit(S_FW_ERROR, &il->status)) {
- IL_ERR("Command %s failed: FW Error\n",
- il_get_cmd_string(cmd->id));
- ret = -EIO;
- goto fail;
- }
- if ((cmd->flags & CMD_WANT_SKB) && !cmd->reply_page) {
- IL_ERR("Error: Response NULL in '%s'\n",
- il_get_cmd_string(cmd->id));
- ret = -EIO;
- goto cancel;
- }
-
- ret = 0;
- goto out;
-
-cancel:
- if (cmd->flags & CMD_WANT_SKB) {
- /*
- * Cancel the CMD_WANT_SKB flag for the cmd in the
- * TX cmd queue. Otherwise in case the cmd comes
- * in later, it will possibly set an invalid
- * address (cmd->meta.source).
- */
- il->txq[il->cmd_queue].meta[cmd_idx].flags &=
- ~CMD_WANT_SKB;
- }
-fail:
- if (cmd->reply_page) {
- il_free_pages(il, cmd->reply_page);
- cmd->reply_page = 0;
- }
-out:
- return ret;
-}
-EXPORT_SYMBOL(il_send_cmd_sync);
-
-int il_send_cmd(struct il_priv *il, struct il_host_cmd *cmd)
-{
- if (cmd->flags & CMD_ASYNC)
- return il_send_cmd_async(il, cmd);
-
- return il_send_cmd_sync(il, cmd);
-}
-EXPORT_SYMBOL(il_send_cmd);
-
-int
-il_send_cmd_pdu(struct il_priv *il, u8 id, u16 len, const void *data)
-{
- struct il_host_cmd cmd = {
- .id = id,
- .len = len,
- .data = data,
- };
-
- return il_send_cmd_sync(il, &cmd);
-}
-EXPORT_SYMBOL(il_send_cmd_pdu);
-
-int il_send_cmd_pdu_async(struct il_priv *il,
- u8 id, u16 len, const void *data,
- void (*callback)(struct il_priv *il,
- struct il_device_cmd *cmd,
- struct il_rx_pkt *pkt))
-{
- struct il_host_cmd cmd = {
- .id = id,
- .len = len,
- .data = data,
- };
-
- cmd.flags |= CMD_ASYNC;
- cmd.callback = callback;
-
- return il_send_cmd_async(il, &cmd);
-}
-EXPORT_SYMBOL(il_send_cmd_pdu_async);
diff --git a/drivers/net/wireless/iwlegacy/iwl-led.c b/drivers/net/wireless/iwlegacy/iwl-led.c
deleted file mode 100644
index a840c2e..0000000
--- a/drivers/net/wireless/iwlegacy/iwl-led.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@xxxxxxxxxxxxxxx>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
-
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-
-/* default: IL_LED_BLINK(0) using blinking idx table */
-static int led_mode;
-module_param(led_mode, int, S_IRUGO);
-MODULE_PARM_DESC(led_mode, "0=system default, "
- "1=On(RF On)/Off(RF Off), 2=blinking");
-
-/* Throughput OFF time(ms) ON time (ms)
- * >300 25 25
- * >200 to 300 40 40
- * >100 to 200 55 55
- * >70 to 100 65 65
- * >50 to 70 75 75
- * >20 to 50 85 85
- * >10 to 20 95 95
- * >5 to 10 110 110
- * >1 to 5 130 130
- * >0 to 1 167 167
- * <=0 SOLID ON
- */
-static const struct ieee80211_tpt_blink il_blink[] = {
- { .throughput = 0, .blink_time = 334 },
- { .throughput = 1 * 1024 - 1, .blink_time = 260 },
- { .throughput = 5 * 1024 - 1, .blink_time = 220 },
- { .throughput = 10 * 1024 - 1, .blink_time = 190 },
- { .throughput = 20 * 1024 - 1, .blink_time = 170 },
- { .throughput = 50 * 1024 - 1, .blink_time = 150 },
- { .throughput = 70 * 1024 - 1, .blink_time = 130 },
- { .throughput = 100 * 1024 - 1, .blink_time = 110 },
- { .throughput = 200 * 1024 - 1, .blink_time = 80 },
- { .throughput = 300 * 1024 - 1, .blink_time = 50 },
-};
-
-/*
- * Adjust led blink rate to compensate on a MAC Clock difference on every HW
- * Led blink rate analysis showed an average deviation of 0% on 3945,
- * 5% on 4965 HW.
- * Need to compensate on the led on/off time per HW according to the deviation
- * to achieve the desired led frequency
- * The calculation is: (100-averageDeviation)/100 * blinkTime
- * For code efficiency the calculation will be:
- * compensation = (100 - averageDeviation) * 64 / 100
- * NewBlinkTime = (compensation * BlinkTime) / 64
- */
-static inline u8 il_blink_compensation(struct il_priv *il,
- u8 time, u16 compensation)
-{
- if (!compensation) {
- IL_ERR("undefined blink compensation: "
- "use pre-defined blinking time\n");
- return time;
- }
-
- return (u8)((time * compensation) >> 6);
-}
-
-/* Set led pattern command */
-static int il_led_cmd(struct il_priv *il,
- unsigned long on,
- unsigned long off)
-{
- struct il_led_cmd led_cmd = {
- .id = IL_LED_LINK,
- .interval = IL_DEF_LED_INTRVL
- };
- int ret;
-
- if (!test_bit(S_READY, &il->status))
- return -EBUSY;
-
- if (il->blink_on == on && il->blink_off == off)
- return 0;
-
- if (off == 0) {
- /* led is SOLID_ON */
- on = IL_LED_SOLID;
- }
-
- D_LED("Led blink time compensation=%u\n",
- il->cfg->base_params->led_compensation);
- led_cmd.on = il_blink_compensation(il, on,
- il->cfg->base_params->led_compensation);
- led_cmd.off = il_blink_compensation(il, off,
- il->cfg->base_params->led_compensation);
-
- ret = il->cfg->ops->led->cmd(il, &led_cmd);
- if (!ret) {
- il->blink_on = on;
- il->blink_off = off;
- }
- return ret;
-}
-
-static void il_led_brightness_set(struct led_classdev *led_cdev,
- enum led_brightness brightness)
-{
- struct il_priv *il = container_of(led_cdev, struct il_priv, led);
- unsigned long on = 0;
-
- if (brightness > 0)
- on = IL_LED_SOLID;
-
- il_led_cmd(il, on, 0);
-}
-
-static int il_led_blink_set(struct led_classdev *led_cdev,
- unsigned long *delay_on,
- unsigned long *delay_off)
-{
- struct il_priv *il = container_of(led_cdev, struct il_priv, led);
-
- return il_led_cmd(il, *delay_on, *delay_off);
-}
-
-void il_leds_init(struct il_priv *il)
-{
- int mode = led_mode;
- int ret;
-
- if (mode == IL_LED_DEFAULT)
- mode = il->cfg->led_mode;
-
- il->led.name = kasprintf(GFP_KERNEL, "%s-led",
- wiphy_name(il->hw->wiphy));
- il->led.brightness_set = il_led_brightness_set;
- il->led.blink_set = il_led_blink_set;
- il->led.max_brightness = 1;
-
- switch (mode) {
- case IL_LED_DEFAULT:
- WARN_ON(1);
- break;
- case IL_LED_BLINK:
- il->led.default_trigger =
- ieee80211_create_tpt_led_trigger(il->hw,
- IEEE80211_TPT_LEDTRIG_FL_CONNECTED,
- il_blink, ARRAY_SIZE(il_blink));
- break;
- case IL_LED_RF_STATE:
- il->led.default_trigger =
- ieee80211_get_radio_led_name(il->hw);
- break;
- }
-
- ret = led_classdev_register(&il->pci_dev->dev, &il->led);
- if (ret) {
- kfree(il->led.name);
- return;
- }
-
- il->led_registered = true;
-}
-EXPORT_SYMBOL(il_leds_init);
-
-void il_leds_exit(struct il_priv *il)
-{
- if (!il->led_registered)
- return;
-
- led_classdev_unregister(&il->led);
- kfree(il->led.name);
-}
-EXPORT_SYMBOL(il_leds_exit);
diff --git a/drivers/net/wireless/iwlegacy/iwl-power.c b/drivers/net/wireless/iwlegacy/iwl-power.c
deleted file mode 100644
index 2b06a95..0000000
--- a/drivers/net/wireless/iwlegacy/iwl-power.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@xxxxxxxxxxxxxxx>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-
-#include <net/mac80211.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-commands.h"
-#include "iwl-debug.h"
-#include "iwl-power.h"
-
-/*
- * Setting power level allows the card to go to sleep when not busy.
- *
- * We calculate a sleep command based on the required latency, which
- * we get from mac80211. In order to handle thermal throttling, we can
- * also use pre-defined power levels.
- */
-
-/*
- * This defines the old power levels. They are still used by default
- * (level 1) and for thermal throttle (levels 3 through 5)
- */
-
-struct il_power_vec_entry {
- struct il_powertable_cmd cmd;
- u8 no_dtim; /* number of skip dtim */
-};
-
-static void il_power_sleep_cam_cmd(struct il_priv *il,
- struct il_powertable_cmd *cmd)
-{
- memset(cmd, 0, sizeof(*cmd));
-
- if (il->power_data.pci_pm)
- cmd->flags |= IL_POWER_PCI_PM_MSK;
-
- D_POWER("Sleep command for CAM\n");
-}
-
-static int
-il_set_power(struct il_priv *il, struct il_powertable_cmd *cmd)
-{
- D_POWER("Sending power/sleep command\n");
- D_POWER("Flags value = 0x%08X\n", cmd->flags);
- D_POWER("Tx timeout = %u\n",
- le32_to_cpu(cmd->tx_data_timeout));
- D_POWER("Rx timeout = %u\n",
- le32_to_cpu(cmd->rx_data_timeout));
- D_POWER(
- "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
- le32_to_cpu(cmd->sleep_interval[0]),
- le32_to_cpu(cmd->sleep_interval[1]),
- le32_to_cpu(cmd->sleep_interval[2]),
- le32_to_cpu(cmd->sleep_interval[3]),
- le32_to_cpu(cmd->sleep_interval[4]));
-
- return il_send_cmd_pdu(il, C_POWER_TBL,
- sizeof(struct il_powertable_cmd), cmd);
-}
-
-int
-il_power_set_mode(struct il_priv *il, struct il_powertable_cmd *cmd,
- bool force)
-{
- int ret;
- bool update_chains;
-
- lockdep_assert_held(&il->mutex);
-
- /* Don't update the RX chain when chain noise calibration is running */
- update_chains = il->chain_noise_data.state == IL_CHAIN_NOISE_DONE ||
- il->chain_noise_data.state == IL_CHAIN_NOISE_ALIVE;
-
- if (!memcmp(&il->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force)
- return 0;
-
- if (!il_is_ready_rf(il))
- return -EIO;
-
- /* scan complete use sleep_power_next, need to be updated */
- memcpy(&il->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
- if (test_bit(S_SCANNING, &il->status) && !force) {
- D_INFO("Defer power set mode while scanning\n");
- return 0;
- }
-
- if (cmd->flags & IL_POWER_DRIVER_ALLOW_SLEEP_MSK)
- set_bit(S_POWER_PMI, &il->status);
-
- ret = il_set_power(il, cmd);
- if (!ret) {
- if (!(cmd->flags & IL_POWER_DRIVER_ALLOW_SLEEP_MSK))
- clear_bit(S_POWER_PMI, &il->status);
-
- if (il->cfg->ops->lib->update_chain_flags && update_chains)
- il->cfg->ops->lib->update_chain_flags(il);
- else if (il->cfg->ops->lib->update_chain_flags)
- D_POWER(
- "Cannot update the power, chain noise "
- "calibration running: %d\n",
- il->chain_noise_data.state);
-
- memcpy(&il->power_data.sleep_cmd, cmd, sizeof(*cmd));
- } else
- IL_ERR("set power fail, ret = %d", ret);
-
- return ret;
-}
-
-int il_power_update_mode(struct il_priv *il, bool force)
-{
- struct il_powertable_cmd cmd;
-
- il_power_sleep_cam_cmd(il, &cmd);
- return il_power_set_mode(il, &cmd, force);
-}
-EXPORT_SYMBOL(il_power_update_mode);
-
-/* initialize to default */
-void il_power_initialize(struct il_priv *il)
-{
- u16 lctl = il_pcie_link_ctl(il);
-
- il->power_data.pci_pm = !(lctl & PCI_CFG_LINK_CTRL_VAL_L0S_EN);
-
- il->power_data.debug_sleep_level_override = -1;
-
- memset(&il->power_data.sleep_cmd, 0,
- sizeof(il->power_data.sleep_cmd));
-}
-EXPORT_SYMBOL(il_power_initialize);
diff --git a/drivers/net/wireless/iwlegacy/iwl-rx.c b/drivers/net/wireless/iwlegacy/iwl-rx.c
deleted file mode 100644
index 7a8ae55..0000000
--- a/drivers/net/wireless/iwlegacy/iwl-rx.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@xxxxxxxxxxxxxxx>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/etherdevice.h>
-#include <linux/slab.h>
-#include <net/mac80211.h>
-#include <asm/unaligned.h>
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-sta.h"
-#include "iwl-io.h"
-#include "iwl-helpers.h"
-/************************** RX-FUNCTIONS ****************************/
-/*
- * Rx theory of operation
- *
- * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs),
- * each of which point to Receive Buffers to be filled by the NIC. These get
- * used not only for Rx frames, but for any command response or notification
- * from the NIC. The driver and NIC manage the Rx buffers by means
- * of idxes into the circular buffer.
- *
- * Rx Queue Indexes
- * The host/firmware share two idx registers for managing the Rx buffers.
- *
- * The READ idx maps to the first position that the firmware may be writing
- * to -- the driver can read up to (but not including) this position and get
- * good data.
- * The READ idx is managed by the firmware once the card is enabled.
- *
- * The WRITE idx maps to the last position the driver has read from -- the
- * position preceding WRITE is the last slot the firmware can place a packet.
- *
- * The queue is empty (no good data) if WRITE = READ - 1, and is full if
- * WRITE = READ.
- *
- * During initialization, the host sets up the READ queue position to the first
- * IDX position, and WRITE to the last (READ - 1 wrapped)
- *
- * When the firmware places a packet in a buffer, it will advance the READ idx
- * and fire the RX interrupt. The driver can then query the READ idx and
- * process as many packets as possible, moving the WRITE idx forward as it
- * resets the Rx queue buffers with new memory.
- *
- * The management in the driver is as follows:
- * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
- * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
- * to replenish the iwl->rxq->rx_free.
- * + In il_rx_replenish (scheduled) if 'processed' != 'read' then the
- * iwl->rxq is replenished and the READ IDX is updated (updating the
- * 'processed' and 'read' driver idxes as well)
- * + A received packet is processed and handed to the kernel network stack,
- * detached from the iwl->rxq. The driver 'processed' idx is updated.
- * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
- * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
- * IDX is not incremented and iwl->status(RX_STALLED) is set. If there
- * were enough free buffers and RX_STALLED is set it is cleared.
- *
- *
- * Driver sequence:
- *
- * il_rx_queue_alloc() Allocates rx_free
- * il_rx_replenish() Replenishes rx_free list from rx_used, and calls
- * il_rx_queue_restock
- * il_rx_queue_restock() Moves available buffers from rx_free into Rx
- * queue, updates firmware pointers, and updates
- * the WRITE idx. If insufficient rx_free buffers
- * are available, schedules il_rx_replenish
- *
- * -- enable interrupts --
- * ISR - il_rx() Detach il_rx_bufs from pool up to the
- * READ IDX, detaching the SKB from the pool.
- * Moves the packet buffer from queue to rx_used.
- * Calls il_rx_queue_restock to refill any empty
- * slots.
- * ...
- *
- */
-
-/**
- * il_rx_queue_space - Return number of free slots available in queue.
- */
-int il_rx_queue_space(const struct il_rx_queue *q)
-{
- int s = q->read - q->write;
- if (s <= 0)
- s += RX_QUEUE_SIZE;
- /* keep some buffer to not confuse full and empty queue */
- s -= 2;
- if (s < 0)
- s = 0;
- return s;
-}
-EXPORT_SYMBOL(il_rx_queue_space);
-
-/**
- * il_rx_queue_update_write_ptr - Update the write pointer for the RX queue
- */
-void
-il_rx_queue_update_write_ptr(struct il_priv *il,
- struct il_rx_queue *q)
-{
- unsigned long flags;
- u32 rx_wrt_ptr_reg = il->hw_params.rx_wrt_ptr_reg;
- u32 reg;
-
- spin_lock_irqsave(&q->lock, flags);
-
- if (q->need_update == 0)
- goto exit_unlock;
-
- /* If power-saving is in use, make sure device is awake */
- if (test_bit(S_POWER_PMI, &il->status)) {
- reg = _il_rd(il, CSR_UCODE_DRV_GP1);
-
- if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
- D_INFO(
- "Rx queue requesting wakeup,"
- " GP1 = 0x%x\n", reg);
- il_set_bit(il, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
- goto exit_unlock;
- }
-
- q->write_actual = (q->write & ~0x7);
- il_wr(il, rx_wrt_ptr_reg,
- q->write_actual);
-
- /* Else device is assumed to be awake */
- } else {
- /* Device expects a multiple of 8 */
- q->write_actual = (q->write & ~0x7);
- il_wr(il, rx_wrt_ptr_reg,
- q->write_actual);
- }
-
- q->need_update = 0;
-
- exit_unlock:
- spin_unlock_irqrestore(&q->lock, flags);
-}
-EXPORT_SYMBOL(il_rx_queue_update_write_ptr);
-
-int il_rx_queue_alloc(struct il_priv *il)
-{
- struct il_rx_queue *rxq = &il->rxq;
- struct device *dev = &il->pci_dev->dev;
- int i;
-
- spin_lock_init(&rxq->lock);
- INIT_LIST_HEAD(&rxq->rx_free);
- INIT_LIST_HEAD(&rxq->rx_used);
-
- /* Alloc the circular buffer of Read Buffer Descriptors (RBDs) */
- rxq->bd = dma_alloc_coherent(dev, 4 * RX_QUEUE_SIZE, &rxq->bd_dma,
- GFP_KERNEL);
- if (!rxq->bd)
- goto err_bd;
-
- rxq->rb_stts = dma_alloc_coherent(dev, sizeof(struct il_rb_status),
- &rxq->rb_stts_dma, GFP_KERNEL);
- if (!rxq->rb_stts)
- goto err_rb;
-
- /* Fill the rx_used queue with _all_ of the Rx buffers */
- for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++)
- list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
-
- /* Set us so that we have processed and used all buffers, but have
- * not restocked the Rx queue with fresh buffers */
- rxq->read = rxq->write = 0;
- rxq->write_actual = 0;
- rxq->free_count = 0;
- rxq->need_update = 0;
- return 0;
-
-err_rb:
- dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
- rxq->bd_dma);
-err_bd:
- return -ENOMEM;
-}
-EXPORT_SYMBOL(il_rx_queue_alloc);
-
-
-void il_hdl_spectrum_measurement(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- struct il_spectrum_notification *report = &(pkt->u.spectrum_notif);
-
- if (!report->state) {
- D_11H(
- "Spectrum Measure Notification: Start\n");
- return;
- }
-
- memcpy(&il->measure_report, report, sizeof(*report));
- il->measurement_status |= MEASUREMENT_READY;
-}
-EXPORT_SYMBOL(il_hdl_spectrum_measurement);
-
-/*
- * returns non-zero if packet should be dropped
- */
-int il_set_decrypted_flag(struct il_priv *il,
- struct ieee80211_hdr *hdr,
- u32 decrypt_res,
- struct ieee80211_rx_status *stats)
-{
- u16 fc = le16_to_cpu(hdr->frame_control);
-
- /*
- * All contexts have the same setting here due to it being
- * a module parameter, so OK to check any context.
- */
- if (il->ctx.active.filter_flags &
- RXON_FILTER_DIS_DECRYPT_MSK)
- return 0;
-
- if (!(fc & IEEE80211_FCTL_PROTECTED))
- return 0;
-
- D_RX("decrypt_res:0x%x\n", decrypt_res);
- switch (decrypt_res & RX_RES_STATUS_SEC_TYPE_MSK) {
- case RX_RES_STATUS_SEC_TYPE_TKIP:
- /* The uCode has got a bad phase 1 Key, pushes the packet.
- * Decryption will be done in SW. */
- if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
- RX_RES_STATUS_BAD_KEY_TTAK)
- break;
-
- case RX_RES_STATUS_SEC_TYPE_WEP:
- if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
- RX_RES_STATUS_BAD_ICV_MIC) {
- /* bad ICV, the packet is destroyed since the
- * decryption is inplace, drop it */
- D_RX("Packet destroyed\n");
- return -1;
- }
- case RX_RES_STATUS_SEC_TYPE_CCMP:
- if ((decrypt_res & RX_RES_STATUS_DECRYPT_TYPE_MSK) ==
- RX_RES_STATUS_DECRYPT_OK) {
- D_RX("hw decrypt successfully!!!\n");
- stats->flag |= RX_FLAG_DECRYPTED;
- }
- break;
-
- default:
- break;
- }
- return 0;
-}
-EXPORT_SYMBOL(il_set_decrypted_flag);
diff --git a/drivers/net/wireless/iwlegacy/iwl-scan.c b/drivers/net/wireless/iwlegacy/iwl-scan.c
deleted file mode 100644
index aaa589a..0000000
--- a/drivers/net/wireless/iwlegacy/iwl-scan.c
+++ /dev/null
@@ -1,545 +0,0 @@
-/******************************************************************************
- *
- * GPL LICENSE SUMMARY
- *
- * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
- * USA
- *
- * The full GNU General Public License is included in this distribution
- * in the file called LICENSE.GPL.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@xxxxxxxxxxxxxxx>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *****************************************************************************/
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/etherdevice.h>
-#include <net/mac80211.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-sta.h"
-#include "iwl-io.h"
-#include "iwl-helpers.h"
-
-/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
- * sending probe req. This should be set long enough to hear probe responses
- * from more than one AP. */
-#define IL_ACTIVE_DWELL_TIME_24 (30) /* all times in msec */
-#define IL_ACTIVE_DWELL_TIME_52 (20)
-
-#define IL_ACTIVE_DWELL_FACTOR_24GHZ (3)
-#define IL_ACTIVE_DWELL_FACTOR_52GHZ (2)
-
-/* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
- * Must be set longer than active dwell time.
- * For the most reliable scan, set > AP beacon interval (typically 100msec). */
-#define IL_PASSIVE_DWELL_TIME_24 (20) /* all times in msec */
-#define IL_PASSIVE_DWELL_TIME_52 (10)
-#define IL_PASSIVE_DWELL_BASE (100)
-#define IL_CHANNEL_TUNE_TIME 5
-
-static int il_send_scan_abort(struct il_priv *il)
-{
- int ret;
- struct il_rx_pkt *pkt;
- struct il_host_cmd cmd = {
- .id = C_SCAN_ABORT,
- .flags = CMD_WANT_SKB,
- };
-
- /* Exit instantly with error when device is not ready
- * to receive scan abort command or it does not perform
- * hardware scan currently */
- if (!test_bit(S_READY, &il->status) ||
- !test_bit(S_GEO_CONFIGURED, &il->status) ||
- !test_bit(S_SCAN_HW, &il->status) ||
- test_bit(S_FW_ERROR, &il->status) ||
- test_bit(S_EXIT_PENDING, &il->status))
- return -EIO;
-
- ret = il_send_cmd_sync(il, &cmd);
- if (ret)
- return ret;
-
- pkt = (struct il_rx_pkt *)cmd.reply_page;
- if (pkt->u.status != CAN_ABORT_STATUS) {
- /* The scan abort will return 1 for success or
- * 2 for "failure". A failure condition can be
- * due to simply not being in an active scan which
- * can occur if we send the scan abort before we
- * the microcode has notified us that a scan is
- * completed. */
- D_SCAN("SCAN_ABORT ret %d.\n", pkt->u.status);
- ret = -EIO;
- }
-
- il_free_pages(il, cmd.reply_page);
- return ret;
-}
-
-static void il_complete_scan(struct il_priv *il, bool aborted)
-{
- /* check if scan was requested from mac80211 */
- if (il->scan_request) {
- D_SCAN("Complete scan in mac80211\n");
- ieee80211_scan_completed(il->hw, aborted);
- }
-
- il->scan_vif = NULL;
- il->scan_request = NULL;
-}
-
-void il_force_scan_end(struct il_priv *il)
-{
- lockdep_assert_held(&il->mutex);
-
- if (!test_bit(S_SCANNING, &il->status)) {
- D_SCAN("Forcing scan end while not scanning\n");
- return;
- }
-
- D_SCAN("Forcing scan end\n");
- clear_bit(S_SCANNING, &il->status);
- clear_bit(S_SCAN_HW, &il->status);
- clear_bit(S_SCAN_ABORTING, &il->status);
- il_complete_scan(il, true);
-}
-
-static void il_do_scan_abort(struct il_priv *il)
-{
- int ret;
-
- lockdep_assert_held(&il->mutex);
-
- if (!test_bit(S_SCANNING, &il->status)) {
- D_SCAN("Not performing scan to abort\n");
- return;
- }
-
- if (test_and_set_bit(S_SCAN_ABORTING, &il->status)) {
- D_SCAN("Scan abort in progress\n");
- return;
- }
-
- ret = il_send_scan_abort(il);
- if (ret) {
- D_SCAN("Send scan abort failed %d\n", ret);
- il_force_scan_end(il);
- } else
- D_SCAN("Successfully send scan abort\n");
-}
-
-/**
- * il_scan_cancel - Cancel any currently executing HW scan
- */
-int il_scan_cancel(struct il_priv *il)
-{
- D_SCAN("Queuing abort scan\n");
- queue_work(il->workqueue, &il->abort_scan);
- return 0;
-}
-EXPORT_SYMBOL(il_scan_cancel);
-
-/**
- * il_scan_cancel_timeout - Cancel any currently executing HW scan
- * @ms: amount of time to wait (in milliseconds) for scan to abort
- *
- */
-int il_scan_cancel_timeout(struct il_priv *il, unsigned long ms)
-{
- unsigned long timeout = jiffies + msecs_to_jiffies(ms);
-
- lockdep_assert_held(&il->mutex);
-
- D_SCAN("Scan cancel timeout\n");
-
- il_do_scan_abort(il);
-
- while (time_before_eq(jiffies, timeout)) {
- if (!test_bit(S_SCAN_HW, &il->status))
- break;
- msleep(20);
- }
-
- return test_bit(S_SCAN_HW, &il->status);
-}
-EXPORT_SYMBOL(il_scan_cancel_timeout);
-
-/* Service response to C_SCAN (0x80) */
-static void il_hdl_scan(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
-#ifdef CONFIG_IWLEGACY_DEBUG
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- struct il_scanreq_notification *notif =
- (struct il_scanreq_notification *)pkt->u.raw;
-
- D_SCAN("Scan request status = 0x%x\n", notif->status);
-#endif
-}
-
-/* Service N_SCAN_START (0x82) */
-static void il_hdl_scan_start(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- struct il_scanstart_notification *notif =
- (struct il_scanstart_notification *)pkt->u.raw;
- il->scan_start_tsf = le32_to_cpu(notif->tsf_low);
- D_SCAN("Scan start: "
- "%d [802.11%s] "
- "(TSF: 0x%08X:%08X) - %d (beacon timer %u)\n",
- notif->channel,
- notif->band ? "bg" : "a",
- le32_to_cpu(notif->tsf_high),
- le32_to_cpu(notif->tsf_low),
- notif->status, notif->beacon_timer);
-}
-
-/* Service N_SCAN_RESULTS (0x83) */
-static void il_hdl_scan_results(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
-#ifdef CONFIG_IWLEGACY_DEBUG
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- struct il_scanresults_notification *notif =
- (struct il_scanresults_notification *)pkt->u.raw;
-
- D_SCAN("Scan ch.res: "
- "%d [802.11%s] "
- "(TSF: 0x%08X:%08X) - %d "
- "elapsed=%lu usec\n",
- notif->channel,
- notif->band ? "bg" : "a",
- le32_to_cpu(notif->tsf_high),
- le32_to_cpu(notif->tsf_low),
- le32_to_cpu(notif->stats[0]),
- le32_to_cpu(notif->tsf_low) - il->scan_start_tsf);
-#endif
-}
-
-/* Service N_SCAN_COMPLETE (0x84) */
-static void il_hdl_scan_complete(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
-
-#ifdef CONFIG_IWLEGACY_DEBUG
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- struct il_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
-#endif
-
- D_SCAN(
- "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
- scan_notif->scanned_channels,
- scan_notif->tsf_low,
- scan_notif->tsf_high, scan_notif->status);
-
- /* The HW is no longer scanning */
- clear_bit(S_SCAN_HW, &il->status);
-
- D_SCAN("Scan on %sGHz took %dms\n",
- (il->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2",
- jiffies_to_msecs(jiffies - il->scan_start));
-
- queue_work(il->workqueue, &il->scan_completed);
-}
-
-void il_setup_rx_scan_handlers(struct il_priv *il)
-{
- /* scan handlers */
- il->handlers[C_SCAN] = il_hdl_scan;
- il->handlers[N_SCAN_START] =
- il_hdl_scan_start;
- il->handlers[N_SCAN_RESULTS] =
- il_hdl_scan_results;
- il->handlers[N_SCAN_COMPLETE] =
- il_hdl_scan_complete;
-}
-EXPORT_SYMBOL(il_setup_rx_scan_handlers);
-
-inline u16 il_get_active_dwell_time(struct il_priv *il,
- enum ieee80211_band band,
- u8 n_probes)
-{
- if (band == IEEE80211_BAND_5GHZ)
- return IL_ACTIVE_DWELL_TIME_52 +
- IL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1);
- else
- return IL_ACTIVE_DWELL_TIME_24 +
- IL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
-}
-EXPORT_SYMBOL(il_get_active_dwell_time);
-
-u16 il_get_passive_dwell_time(struct il_priv *il,
- enum ieee80211_band band,
- struct ieee80211_vif *vif)
-{
- struct il_rxon_context *ctx = &il->ctx;
- u16 value;
-
- u16 passive = (band == IEEE80211_BAND_2GHZ) ?
- IL_PASSIVE_DWELL_BASE + IL_PASSIVE_DWELL_TIME_24 :
- IL_PASSIVE_DWELL_BASE + IL_PASSIVE_DWELL_TIME_52;
-
- if (il_is_any_associated(il)) {
- /*
- * If we're associated, we clamp the maximum passive
- * dwell time to be 98% of the smallest beacon interval
- * (minus 2 * channel tune time)
- */
- value = ctx->vif ? ctx->vif->bss_conf.beacon_int : 0;
- if (value > IL_PASSIVE_DWELL_BASE || !value)
- value = IL_PASSIVE_DWELL_BASE;
- value = (value * 98) / 100 - IL_CHANNEL_TUNE_TIME * 2;
- passive = min(value, passive);
- }
-
- return passive;
-}
-EXPORT_SYMBOL(il_get_passive_dwell_time);
-
-void il_init_scan_params(struct il_priv *il)
-{
- u8 ant_idx = fls(il->hw_params.valid_tx_ant) - 1;
- if (!il->scan_tx_ant[IEEE80211_BAND_5GHZ])
- il->scan_tx_ant[IEEE80211_BAND_5GHZ] = ant_idx;
- if (!il->scan_tx_ant[IEEE80211_BAND_2GHZ])
- il->scan_tx_ant[IEEE80211_BAND_2GHZ] = ant_idx;
-}
-EXPORT_SYMBOL(il_init_scan_params);
-
-static int il_scan_initiate(struct il_priv *il,
- struct ieee80211_vif *vif)
-{
- int ret;
-
- lockdep_assert_held(&il->mutex);
-
- if (WARN_ON(!il->cfg->ops->utils->request_scan))
- return -EOPNOTSUPP;
-
- cancel_delayed_work(&il->scan_check);
-
- if (!il_is_ready_rf(il)) {
- IL_WARN("Request scan called when driver not ready.\n");
- return -EIO;
- }
-
- if (test_bit(S_SCAN_HW, &il->status)) {
- D_SCAN(
- "Multiple concurrent scan requests in parallel.\n");
- return -EBUSY;
- }
-
- if (test_bit(S_SCAN_ABORTING, &il->status)) {
- D_SCAN("Scan request while abort pending.\n");
- return -EBUSY;
- }
-
- D_SCAN("Starting scan...\n");
-
- set_bit(S_SCANNING, &il->status);
- il->scan_start = jiffies;
-
- ret = il->cfg->ops->utils->request_scan(il, vif);
- if (ret) {
- clear_bit(S_SCANNING, &il->status);
- return ret;
- }
-
- queue_delayed_work(il->workqueue, &il->scan_check,
- IL_SCAN_CHECK_WATCHDOG);
-
- return 0;
-}
-
-int il_mac_hw_scan(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct cfg80211_scan_request *req)
-{
- struct il_priv *il = hw->priv;
- int ret;
-
- D_MAC80211("enter\n");
-
- if (req->n_channels == 0)
- return -EINVAL;
-
- mutex_lock(&il->mutex);
-
- if (test_bit(S_SCANNING, &il->status)) {
- D_SCAN("Scan already in progress.\n");
- ret = -EAGAIN;
- goto out_unlock;
- }
-
- /* mac80211 will only ask for one band at a time */
- il->scan_request = req;
- il->scan_vif = vif;
- il->scan_band = req->channels[0]->band;
-
- ret = il_scan_initiate(il, vif);
-
- D_MAC80211("leave\n");
-
-out_unlock:
- mutex_unlock(&il->mutex);
-
- return ret;
-}
-EXPORT_SYMBOL(il_mac_hw_scan);
-
-static void il_bg_scan_check(struct work_struct *data)
-{
- struct il_priv *il =
- container_of(data, struct il_priv, scan_check.work);
-
- D_SCAN("Scan check work\n");
-
- /* Since we are here firmware does not finish scan and
- * most likely is in bad shape, so we don't bother to
- * send abort command, just force scan complete to mac80211 */
- mutex_lock(&il->mutex);
- il_force_scan_end(il);
- mutex_unlock(&il->mutex);
-}
-
-/**
- * il_fill_probe_req - fill in all required fields and IE for probe request
- */
-
-u16
-il_fill_probe_req(struct il_priv *il, struct ieee80211_mgmt *frame,
- const u8 *ta, const u8 *ies, int ie_len, int left)
-{
- int len = 0;
- u8 *pos = NULL;
-
- /* Make sure there is enough space for the probe request,
- * two mandatory IEs and the data */
- left -= 24;
- if (left < 0)
- return 0;
-
- frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
- memcpy(frame->da, il_bcast_addr, ETH_ALEN);
- memcpy(frame->sa, ta, ETH_ALEN);
- memcpy(frame->bssid, il_bcast_addr, ETH_ALEN);
- frame->seq_ctrl = 0;
-
- len += 24;
-
- /* ...next IE... */
- pos = &frame->u.probe_req.variable[0];
-
- /* fill in our indirect SSID IE */
- left -= 2;
- if (left < 0)
- return 0;
- *pos++ = WLAN_EID_SSID;
- *pos++ = 0;
-
- len += 2;
-
- if (WARN_ON(left < ie_len))
- return len;
-
- if (ies && ie_len) {
- memcpy(pos, ies, ie_len);
- len += ie_len;
- }
-
- return (u16)len;
-}
-EXPORT_SYMBOL(il_fill_probe_req);
-
-static void il_bg_abort_scan(struct work_struct *work)
-{
- struct il_priv *il = container_of(work, struct il_priv, abort_scan);
-
- D_SCAN("Abort scan work\n");
-
- /* We keep scan_check work queued in case when firmware will not
- * report back scan completed notification */
- mutex_lock(&il->mutex);
- il_scan_cancel_timeout(il, 200);
- mutex_unlock(&il->mutex);
-}
-
-static void il_bg_scan_completed(struct work_struct *work)
-{
- struct il_priv *il =
- container_of(work, struct il_priv, scan_completed);
- bool aborted;
-
- D_SCAN("Completed scan.\n");
-
- cancel_delayed_work(&il->scan_check);
-
- mutex_lock(&il->mutex);
-
- aborted = test_and_clear_bit(S_SCAN_ABORTING, &il->status);
- if (aborted)
- D_SCAN("Aborted scan completed.\n");
-
- if (!test_and_clear_bit(S_SCANNING, &il->status)) {
- D_SCAN("Scan already completed.\n");
- goto out_settings;
- }
-
- il_complete_scan(il, aborted);
-
-out_settings:
- /* Can we still talk to firmware ? */
- if (!il_is_ready_rf(il))
- goto out;
-
- /*
- * We do not commit power settings while scan is pending,
- * do it now if the settings changed.
- */
- il_power_set_mode(il, &il->power_data.sleep_cmd_next, false);
- il_set_tx_power(il, il->tx_power_next, false);
-
- il->cfg->ops->utils->post_scan(il);
-
-out:
- mutex_unlock(&il->mutex);
-}
-
-void il_setup_scan_deferred_work(struct il_priv *il)
-{
- INIT_WORK(&il->scan_completed, il_bg_scan_completed);
- INIT_WORK(&il->abort_scan, il_bg_abort_scan);
- INIT_DELAYED_WORK(&il->scan_check, il_bg_scan_check);
-}
-EXPORT_SYMBOL(il_setup_scan_deferred_work);
-
-void il_cancel_scan_deferred_work(struct il_priv *il)
-{
- cancel_work_sync(&il->abort_scan);
- cancel_work_sync(&il->scan_completed);
-
- if (cancel_delayed_work_sync(&il->scan_check)) {
- mutex_lock(&il->mutex);
- il_force_scan_end(il);
- mutex_unlock(&il->mutex);
- }
-}
-EXPORT_SYMBOL(il_cancel_scan_deferred_work);
diff --git a/drivers/net/wireless/iwlegacy/iwl-tx.c b/drivers/net/wireless/iwlegacy/iwl-tx.c
deleted file mode 100644
index 3b588b3..0000000
--- a/drivers/net/wireless/iwlegacy/iwl-tx.c
+++ /dev/null
@@ -1,655 +0,0 @@
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@xxxxxxxxxxxxxxx>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/etherdevice.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <net/mac80211.h>
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-sta.h"
-#include "iwl-io.h"
-#include "iwl-helpers.h"
-
-/**
- * il_txq_update_write_ptr - Send new write idx to hardware
- */
-void
-il_txq_update_write_ptr(struct il_priv *il, struct il_tx_queue *txq)
-{
- u32 reg = 0;
- int txq_id = txq->q.id;
-
- if (txq->need_update == 0)
- return;
-
- /* if we're trying to save power */
- if (test_bit(S_POWER_PMI, &il->status)) {
- /* wake up nic if it's powered down ...
- * uCode will wake up, and interrupt us again, so next
- * time we'll skip this part. */
- reg = _il_rd(il, CSR_UCODE_DRV_GP1);
-
- if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
- D_INFO(
- "Tx queue %d requesting wakeup,"
- " GP1 = 0x%x\n", txq_id, reg);
- il_set_bit(il, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
- return;
- }
-
- il_wr(il, HBUS_TARG_WRPTR,
- txq->q.write_ptr | (txq_id << 8));
-
- /*
- * else not in power-save mode,
- * uCode will never sleep when we're
- * trying to tx (during RFKILL, we're not trying to tx).
- */
- } else
- _il_wr(il, HBUS_TARG_WRPTR,
- txq->q.write_ptr | (txq_id << 8));
- txq->need_update = 0;
-}
-EXPORT_SYMBOL(il_txq_update_write_ptr);
-
-/**
- * il_tx_queue_unmap - Unmap any remaining DMA mappings and free skb's
- */
-void il_tx_queue_unmap(struct il_priv *il, int txq_id)
-{
- struct il_tx_queue *txq = &il->txq[txq_id];
- struct il_queue *q = &txq->q;
-
- if (q->n_bd == 0)
- return;
-
- while (q->write_ptr != q->read_ptr) {
- il->cfg->ops->lib->txq_free_tfd(il, txq);
- q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd);
- }
-}
-EXPORT_SYMBOL(il_tx_queue_unmap);
-
-/**
- * il_tx_queue_free - Deallocate DMA queue.
- * @txq: Transmit queue to deallocate.
- *
- * Empty queue by removing and destroying all BD's.
- * Free all buffers.
- * 0-fill, but do not free "txq" descriptor structure.
- */
-void il_tx_queue_free(struct il_priv *il, int txq_id)
-{
- struct il_tx_queue *txq = &il->txq[txq_id];
- struct device *dev = &il->pci_dev->dev;
- int i;
-
- il_tx_queue_unmap(il, txq_id);
-
- /* De-alloc array of command/tx buffers */
- for (i = 0; i < TFD_TX_CMD_SLOTS; i++)
- kfree(txq->cmd[i]);
-
- /* De-alloc circular buffer of TFDs */
- if (txq->q.n_bd)
- dma_free_coherent(dev, il->hw_params.tfd_size *
- txq->q.n_bd, txq->tfds, txq->q.dma_addr);
-
- /* De-alloc array of per-TFD driver data */
- kfree(txq->txb);
- txq->txb = NULL;
-
- /* deallocate arrays */
- kfree(txq->cmd);
- kfree(txq->meta);
- txq->cmd = NULL;
- txq->meta = NULL;
-
- /* 0-fill queue descriptor structure */
- memset(txq, 0, sizeof(*txq));
-}
-EXPORT_SYMBOL(il_tx_queue_free);
-
-/**
- * il_cmd_queue_unmap - Unmap any remaining DMA mappings from command queue
- */
-void il_cmd_queue_unmap(struct il_priv *il)
-{
- struct il_tx_queue *txq = &il->txq[il->cmd_queue];
- struct il_queue *q = &txq->q;
- int i;
-
- if (q->n_bd == 0)
- return;
-
- while (q->read_ptr != q->write_ptr) {
- i = il_get_cmd_idx(q, q->read_ptr, 0);
-
- if (txq->meta[i].flags & CMD_MAPPED) {
- pci_unmap_single(il->pci_dev,
- dma_unmap_addr(&txq->meta[i], mapping),
- dma_unmap_len(&txq->meta[i], len),
- PCI_DMA_BIDIRECTIONAL);
- txq->meta[i].flags = 0;
- }
-
- q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd);
- }
-
- i = q->n_win;
- if (txq->meta[i].flags & CMD_MAPPED) {
- pci_unmap_single(il->pci_dev,
- dma_unmap_addr(&txq->meta[i], mapping),
- dma_unmap_len(&txq->meta[i], len),
- PCI_DMA_BIDIRECTIONAL);
- txq->meta[i].flags = 0;
- }
-}
-EXPORT_SYMBOL(il_cmd_queue_unmap);
-
-/**
- * il_cmd_queue_free - Deallocate DMA queue.
- * @txq: Transmit queue to deallocate.
- *
- * Empty queue by removing and destroying all BD's.
- * Free all buffers.
- * 0-fill, but do not free "txq" descriptor structure.
- */
-void il_cmd_queue_free(struct il_priv *il)
-{
- struct il_tx_queue *txq = &il->txq[il->cmd_queue];
- struct device *dev = &il->pci_dev->dev;
- int i;
-
- il_cmd_queue_unmap(il);
-
- /* De-alloc array of command/tx buffers */
- for (i = 0; i <= TFD_CMD_SLOTS; i++)
- kfree(txq->cmd[i]);
-
- /* De-alloc circular buffer of TFDs */
- if (txq->q.n_bd)
- dma_free_coherent(dev, il->hw_params.tfd_size * txq->q.n_bd,
- txq->tfds, txq->q.dma_addr);
-
- /* deallocate arrays */
- kfree(txq->cmd);
- kfree(txq->meta);
- txq->cmd = NULL;
- txq->meta = NULL;
-
- /* 0-fill queue descriptor structure */
- memset(txq, 0, sizeof(*txq));
-}
-EXPORT_SYMBOL(il_cmd_queue_free);
-
-/*************** DMA-QUEUE-GENERAL-FUNCTIONS *****
- * DMA services
- *
- * Theory of operation
- *
- * A Tx or Rx queue resides in host DRAM, and is comprised of a circular buffer
- * of buffer descriptors, each of which points to one or more data buffers for
- * the device to read from or fill. Driver and device exchange status of each
- * queue via "read" and "write" pointers. Driver keeps minimum of 2 empty
- * entries in each circular buffer, to protect against confusing empty and full
- * queue states.
- *
- * The device reads or writes the data in the queues via the device's several
- * DMA/FIFO channels. Each queue is mapped to a single DMA channel.
- *
- * For Tx queue, there are low mark and high mark limits. If, after queuing
- * the packet for Tx, free space become < low mark, Tx queue stopped. When
- * reclaiming packets (on 'tx done IRQ), if free space become > high mark,
- * Tx queue resumed.
- *
- * See more detailed info in 4965.h.
- ***************************************************/
-
-int il_queue_space(const struct il_queue *q)
-{
- int s = q->read_ptr - q->write_ptr;
-
- if (q->read_ptr > q->write_ptr)
- s -= q->n_bd;
-
- if (s <= 0)
- s += q->n_win;
- /* keep some reserve to not confuse empty and full situations */
- s -= 2;
- if (s < 0)
- s = 0;
- return s;
-}
-EXPORT_SYMBOL(il_queue_space);
-
-
-/**
- * il_queue_init - Initialize queue's high/low-water and read/write idxes
- */
-static int il_queue_init(struct il_priv *il, struct il_queue *q,
- int count, int slots_num, u32 id)
-{
- q->n_bd = count;
- q->n_win = slots_num;
- q->id = id;
-
- /* count must be power-of-two size, otherwise il_queue_inc_wrap
- * and il_queue_dec_wrap are broken. */
- BUG_ON(!is_power_of_2(count));
-
- /* slots_num must be power-of-two size, otherwise
- * il_get_cmd_idx is broken. */
- BUG_ON(!is_power_of_2(slots_num));
-
- q->low_mark = q->n_win / 4;
- if (q->low_mark < 4)
- q->low_mark = 4;
-
- q->high_mark = q->n_win / 8;
- if (q->high_mark < 2)
- q->high_mark = 2;
-
- q->write_ptr = q->read_ptr = 0;
-
- return 0;
-}
-
-/**
- * il_tx_queue_alloc - Alloc driver data and TFD CB for one Tx/cmd queue
- */
-static int il_tx_queue_alloc(struct il_priv *il,
- struct il_tx_queue *txq, u32 id)
-{
- struct device *dev = &il->pci_dev->dev;
- size_t tfd_sz = il->hw_params.tfd_size * TFD_QUEUE_SIZE_MAX;
-
- /* Driver ilate data, only for Tx (not command) queues,
- * not shared with device. */
- if (id != il->cmd_queue) {
- txq->txb = kzalloc(sizeof(txq->txb[0]) *
- TFD_QUEUE_SIZE_MAX, GFP_KERNEL);
- if (!txq->txb) {
- IL_ERR("kmalloc for auxiliary BD "
- "structures failed\n");
- goto error;
- }
- } else {
- txq->txb = NULL;
- }
-
- /* Circular buffer of transmit frame descriptors (TFDs),
- * shared with device */
- txq->tfds = dma_alloc_coherent(dev, tfd_sz, &txq->q.dma_addr,
- GFP_KERNEL);
- if (!txq->tfds) {
- IL_ERR("pci_alloc_consistent(%zd) failed\n", tfd_sz);
- goto error;
- }
- txq->q.id = id;
-
- return 0;
-
- error:
- kfree(txq->txb);
- txq->txb = NULL;
-
- return -ENOMEM;
-}
-
-/**
- * il_tx_queue_init - Allocate and initialize one tx/cmd queue
- */
-int il_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq,
- int slots_num, u32 txq_id)
-{
- int i, len;
- int ret;
- int actual_slots = slots_num;
-
- /*
- * Alloc buffer array for commands (Tx or other types of commands).
- * For the command queue (#4/#9), allocate command space + one big
- * command for scan, since scan command is very huge; the system will
- * not have two scans at the same time, so only one is needed.
- * For normal Tx queues (all other queues), no super-size command
- * space is needed.
- */
- if (txq_id == il->cmd_queue)
- actual_slots++;
-
- txq->meta = kzalloc(sizeof(struct il_cmd_meta) * actual_slots,
- GFP_KERNEL);
- txq->cmd = kzalloc(sizeof(struct il_device_cmd *) * actual_slots,
- GFP_KERNEL);
-
- if (!txq->meta || !txq->cmd)
- goto out_free_arrays;
-
- len = sizeof(struct il_device_cmd);
- for (i = 0; i < actual_slots; i++) {
- /* only happens for cmd queue */
- if (i == slots_num)
- len = IL_MAX_CMD_SIZE;
-
- txq->cmd[i] = kmalloc(len, GFP_KERNEL);
- if (!txq->cmd[i])
- goto err;
- }
-
- /* Alloc driver data array and TFD circular buffer */
- ret = il_tx_queue_alloc(il, txq, txq_id);
- if (ret)
- goto err;
-
- txq->need_update = 0;
-
- /*
- * For the default queues 0-3, set up the swq_id
- * already -- all others need to get one later
- * (if they need one at all).
- */
- if (txq_id < 4)
- il_set_swq_id(txq, txq_id, txq_id);
-
- /* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
- * il_queue_inc_wrap and il_queue_dec_wrap are broken. */
- BUILD_BUG_ON(TFD_QUEUE_SIZE_MAX & (TFD_QUEUE_SIZE_MAX - 1));
-
- /* Initialize queue's high/low-water marks, and head/tail idxes */
- il_queue_init(il, &txq->q,
- TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
-
- /* Tell device where to find queue */
- il->cfg->ops->lib->txq_init(il, txq);
-
- return 0;
-err:
- for (i = 0; i < actual_slots; i++)
- kfree(txq->cmd[i]);
-out_free_arrays:
- kfree(txq->meta);
- kfree(txq->cmd);
-
- return -ENOMEM;
-}
-EXPORT_SYMBOL(il_tx_queue_init);
-
-void il_tx_queue_reset(struct il_priv *il, struct il_tx_queue *txq,
- int slots_num, u32 txq_id)
-{
- int actual_slots = slots_num;
-
- if (txq_id == il->cmd_queue)
- actual_slots++;
-
- memset(txq->meta, 0, sizeof(struct il_cmd_meta) * actual_slots);
-
- txq->need_update = 0;
-
- /* Initialize queue's high/low-water marks, and head/tail idxes */
- il_queue_init(il, &txq->q,
- TFD_QUEUE_SIZE_MAX, slots_num, txq_id);
-
- /* Tell device where to find queue */
- il->cfg->ops->lib->txq_init(il, txq);
-}
-EXPORT_SYMBOL(il_tx_queue_reset);
-
-/*************** HOST COMMAND QUEUE FUNCTIONS *****/
-
-/**
- * il_enqueue_hcmd - enqueue a uCode command
- * @il: device ilate data point
- * @cmd: a point to the ucode command structure
- *
- * The function returns < 0 values to indicate the operation is
- * failed. On success, it turns the idx (> 0) of command in the
- * command queue.
- */
-int il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd)
-{
- struct il_tx_queue *txq = &il->txq[il->cmd_queue];
- struct il_queue *q = &txq->q;
- struct il_device_cmd *out_cmd;
- struct il_cmd_meta *out_meta;
- dma_addr_t phys_addr;
- unsigned long flags;
- int len;
- u32 idx;
- u16 fix_size;
-
- cmd->len = il->cfg->ops->utils->get_hcmd_size(cmd->id, cmd->len);
- fix_size = (u16)(cmd->len + sizeof(out_cmd->hdr));
-
- /* If any of the command structures end up being larger than
- * the TFD_MAX_PAYLOAD_SIZE, and it sent as a 'small' command then
- * we will need to increase the size of the TFD entries
- * Also, check to see if command buffer should not exceed the size
- * of device_cmd and max_cmd_size. */
- BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
- !(cmd->flags & CMD_SIZE_HUGE));
- BUG_ON(fix_size > IL_MAX_CMD_SIZE);
-
- if (il_is_rfkill(il) || il_is_ctkill(il)) {
- IL_WARN("Not sending command - %s KILL\n",
- il_is_rfkill(il) ? "RF" : "CT");
- return -EIO;
- }
-
- spin_lock_irqsave(&il->hcmd_lock, flags);
-
- if (il_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
- spin_unlock_irqrestore(&il->hcmd_lock, flags);
-
- IL_ERR("Restarting adapter due to command queue full\n");
- queue_work(il->workqueue, &il->restart);
- return -ENOSPC;
- }
-
- idx = il_get_cmd_idx(q, q->write_ptr, cmd->flags & CMD_SIZE_HUGE);
- out_cmd = txq->cmd[idx];
- out_meta = &txq->meta[idx];
-
- if (WARN_ON(out_meta->flags & CMD_MAPPED)) {
- spin_unlock_irqrestore(&il->hcmd_lock, flags);
- return -ENOSPC;
- }
-
- memset(out_meta, 0, sizeof(*out_meta)); /* re-initialize to NULL */
- out_meta->flags = cmd->flags | CMD_MAPPED;
- if (cmd->flags & CMD_WANT_SKB)
- out_meta->source = cmd;
- if (cmd->flags & CMD_ASYNC)
- out_meta->callback = cmd->callback;
-
- out_cmd->hdr.cmd = cmd->id;
- memcpy(&out_cmd->cmd.payload, cmd->data, cmd->len);
-
- /* At this point, the out_cmd now has all of the incoming cmd
- * information */
-
- out_cmd->hdr.flags = 0;
- out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(il->cmd_queue) |
- IDX_TO_SEQ(q->write_ptr));
- if (cmd->flags & CMD_SIZE_HUGE)
- out_cmd->hdr.sequence |= SEQ_HUGE_FRAME;
- len = sizeof(struct il_device_cmd);
- if (idx == TFD_CMD_SLOTS)
- len = IL_MAX_CMD_SIZE;
-
-#ifdef CONFIG_IWLEGACY_DEBUG
- switch (out_cmd->hdr.cmd) {
- case C_TX_LINK_QUALITY_CMD:
- case C_SENSITIVITY:
- D_HC_DUMP(
- "Sending command %s (#%x), seq: 0x%04X, "
- "%d bytes at %d[%d]:%d\n",
- il_get_cmd_string(out_cmd->hdr.cmd),
- out_cmd->hdr.cmd,
- le16_to_cpu(out_cmd->hdr.sequence), fix_size,
- q->write_ptr, idx, il->cmd_queue);
- break;
- default:
- D_HC("Sending command %s (#%x), seq: 0x%04X, "
- "%d bytes at %d[%d]:%d\n",
- il_get_cmd_string(out_cmd->hdr.cmd),
- out_cmd->hdr.cmd,
- le16_to_cpu(out_cmd->hdr.sequence), fix_size,
- q->write_ptr, idx, il->cmd_queue);
- }
-#endif
- txq->need_update = 1;
-
- if (il->cfg->ops->lib->txq_update_byte_cnt_tbl)
- /* Set up entry in queue's byte count circular buffer */
- il->cfg->ops->lib->txq_update_byte_cnt_tbl(il, txq, 0);
-
- phys_addr = pci_map_single(il->pci_dev, &out_cmd->hdr,
- fix_size, PCI_DMA_BIDIRECTIONAL);
- dma_unmap_addr_set(out_meta, mapping, phys_addr);
- dma_unmap_len_set(out_meta, len, fix_size);
-
- il->cfg->ops->lib->txq_attach_buf_to_tfd(il, txq,
- phys_addr, fix_size, 1,
- U32_PAD(cmd->len));
-
- /* Increment and update queue's write idx */
- q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
- il_txq_update_write_ptr(il, txq);
-
- spin_unlock_irqrestore(&il->hcmd_lock, flags);
- return idx;
-}
-
-/**
- * il_hcmd_queue_reclaim - Reclaim TX command queue entries already Tx'd
- *
- * When FW advances 'R' idx, all entries between old and new 'R' idx
- * need to be reclaimed. As result, some free space forms. If there is
- * enough free space (> low mark), wake the stack that feeds us.
- */
-static void il_hcmd_queue_reclaim(struct il_priv *il, int txq_id,
- int idx, int cmd_idx)
-{
- struct il_tx_queue *txq = &il->txq[txq_id];
- struct il_queue *q = &txq->q;
- int nfreed = 0;
-
- if (idx >= q->n_bd || il_queue_used(q, idx) == 0) {
- IL_ERR("Read idx for DMA queue txq id (%d), idx %d, "
- "is out of range [0-%d] %d %d.\n", txq_id,
- idx, q->n_bd, q->write_ptr, q->read_ptr);
- return;
- }
-
- for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
- q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {
-
- if (nfreed++ > 0) {
- IL_ERR("HCMD skipped: idx (%d) %d %d\n", idx,
- q->write_ptr, q->read_ptr);
- queue_work(il->workqueue, &il->restart);
- }
-
- }
-}
-
-/**
- * il_tx_cmd_complete - Pull unused buffers off the queue and reclaim them
- * @rxb: Rx buffer to reclaim
- *
- * If an Rx buffer has an async callback associated with it the callback
- * will be executed. The attached skb (if present) will only be freed
- * if the callback returns 1
- */
-void
-il_tx_cmd_complete(struct il_priv *il, struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- u16 sequence = le16_to_cpu(pkt->hdr.sequence);
- int txq_id = SEQ_TO_QUEUE(sequence);
- int idx = SEQ_TO_IDX(sequence);
- int cmd_idx;
- bool huge = !!(pkt->hdr.sequence & SEQ_HUGE_FRAME);
- struct il_device_cmd *cmd;
- struct il_cmd_meta *meta;
- struct il_tx_queue *txq = &il->txq[il->cmd_queue];
- unsigned long flags;
-
- /* If a Tx command is being handled and it isn't in the actual
- * command queue then there a command routing bug has been introduced
- * in the queue management code. */
- if (WARN(txq_id != il->cmd_queue,
- "wrong command queue %d (should be %d), sequence 0x%X readp=%d writep=%d\n",
- txq_id, il->cmd_queue, sequence,
- il->txq[il->cmd_queue].q.read_ptr,
- il->txq[il->cmd_queue].q.write_ptr)) {
- il_print_hex_error(il, pkt, 32);
- return;
- }
-
- cmd_idx = il_get_cmd_idx(&txq->q, idx, huge);
- cmd = txq->cmd[cmd_idx];
- meta = &txq->meta[cmd_idx];
-
- txq->time_stamp = jiffies;
-
- pci_unmap_single(il->pci_dev,
- dma_unmap_addr(meta, mapping),
- dma_unmap_len(meta, len),
- PCI_DMA_BIDIRECTIONAL);
-
- /* Input error checking is done when commands are added to queue. */
- if (meta->flags & CMD_WANT_SKB) {
- meta->source->reply_page = (unsigned long)rxb_addr(rxb);
- rxb->page = NULL;
- } else if (meta->callback)
- meta->callback(il, cmd, pkt);
-
- spin_lock_irqsave(&il->hcmd_lock, flags);
-
- il_hcmd_queue_reclaim(il, txq_id, idx, cmd_idx);
-
- if (!(meta->flags & CMD_ASYNC)) {
- clear_bit(S_HCMD_ACTIVE, &il->status);
- D_INFO("Clearing HCMD_ACTIVE for command %s\n",
- il_get_cmd_string(cmd->hdr.cmd));
- wake_up(&il->wait_command_queue);
- }
-
- /* Mark as unmapped */
- meta->flags = 0;
-
- spin_unlock_irqrestore(&il->hcmd_lock, flags);
-}
-EXPORT_SYMBOL(il_tx_cmd_complete);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
