Now two modules are built, ath6kl_sdio.ko and ath6kl_usb.ko. But the USB
module isn't fully functional yet as HTC layer is missing support and
that's why it's marked as experimental for now.
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath6kl/Kconfig | 25 +++++++++++++++++---
drivers/net/wireless/ath/ath6kl/Makefile | 37 ++++++++++++++++++++----------
drivers/net/wireless/ath/ath6kl/sdio.c | 2 +-
3 files changed, 47 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/ath/ath6kl/Kconfig b/drivers/net/wireless/ath/ath6kl/Kconfig
index 3d5f8be..d755a5e 100644
--- a/drivers/net/wireless/ath/ath6kl/Kconfig
+++ b/drivers/net/wireless/ath/ath6kl/Kconfig
@@ -1,12 +1,29 @@
config ATH6KL
- tristate "Atheros ath6kl support"
+ tristate "Atheros mobile chipsets support"
+
+config ATH6KL_SDIO
+ tristate "Atheros ath6kl SDIO support"
+ depends on ATH6KL
depends on MMC
depends on CFG80211
---help---
This module adds support for wireless adapters based on
- Atheros AR6003 chipset running over SDIO. If you choose to
- build it as a module, it will be called ath6kl. Pls note
- that AR6002 and AR6001 are not supported by this driver.
+ Atheros AR6003 and AR6004 chipsets running over SDIO. If you
+ choose to build it as a module, it will be called ath6kl_sdio.
+ Please note that AR6002 and AR6001 are not supported by this
+ driver.
+
+config ATH6KL_USB
+ tristate "Atheros ath6kl USB support"
+ depends on ATH6KL
+ depends on USB
+ depends on CFG80211
+ depends on EXPERIMENTAL
+ ---help---
+ This module adds support for wireless adapters based on
+ Atheros AR6004 chipset running over USB. This is still under
+ implementation and it isn't functional. If you choose to
+ build it as a module, it will be called ath6kl_usb.
config ATH6KL_DEBUG
bool "Atheros ath6kl debugging"
diff --git a/drivers/net/wireless/ath/ath6kl/Makefile b/drivers/net/wireless/ath/ath6kl/Makefile
index 7070693..e14cef9 100644
--- a/drivers/net/wireless/ath/ath6kl/Makefile
+++ b/drivers/net/wireless/ath/ath6kl/Makefile
@@ -21,17 +21,30 @@
# Author(s): ="Atheros"
#------------------------------------------------------------------------------
-obj-$(CONFIG_ATH6KL) := ath6kl.o
-ath6kl-y += debug.o
-ath6kl-y += hif.o
-ath6kl-y += htc.o
-ath6kl-y += bmi.o
-ath6kl-y += cfg80211.o
-ath6kl-y += init.o
-ath6kl-y += main.o
-ath6kl-y += txrx.o
-ath6kl-y += wmi.o
-ath6kl-y += sdio.o
-ath6kl-$(CONFIG_NL80211_TESTMODE) += testmode.o
+obj-$(CONFIG_ATH6KL_SDIO) := ath6kl_sdio.o
+ath6kl_sdio-y += debug.o
+ath6kl_sdio-y += hif.o
+ath6kl_sdio-y += htc.o
+ath6kl_sdio-y += bmi.o
+ath6kl_sdio-y += cfg80211.o
+ath6kl_sdio-y += init.o
+ath6kl_sdio-y += main.o
+ath6kl_sdio-y += txrx.o
+ath6kl_sdio-y += wmi.o
+ath6kl_sdio-y += sdio.o
+ath6kl_sdio-$(CONFIG_NL80211_TESTMODE) += testmode.o
+
+obj-$(CONFIG_ATH6KL_USB) += ath6kl_usb.o
+ath6kl_usb-y += debug.o
+ath6kl_usb-y += hif.o
+ath6kl_usb-y += htc.o
+ath6kl_usb-y += bmi.o
+ath6kl_usb-y += cfg80211.o
+ath6kl_usb-y += init.o
+ath6kl_usb-y += main.o
+ath6kl_usb-y += txrx.o
+ath6kl_usb-y += wmi.o
+ath6kl_usb-y += usb.o
+ath6kl_usb-$(CONFIG_NL80211_TESTMODE) += testmode.o
ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index 2fbe5f4..1d097d0 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1299,7 +1299,7 @@ static const struct sdio_device_id ath6kl_sdio_devices[] = {
MODULE_DEVICE_TABLE(sdio, ath6kl_sdio_devices);
static struct sdio_driver ath6kl_sdio_driver = {
- .name = "ath6kl",
+ .name = "ath6kl_sdio",
.id_table = ath6kl_sdio_devices,
.probe = ath6kl_sdio_probe,
.remove = ath6kl_sdio_remove,
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
