There were a couple of code segments left that were placed under
a macro definition that was not applicable or not used in the
brcmsmac driver. These pieces of code have been removed.
Reviewed-by: Pieter-Paul Giesberts <pieterpg@xxxxxxxxxxxx>
Reviewed-by: Roland Vossen <rvossen@xxxxxxxxxxxx>
Reviewed-by: Alwin Beukers <alwin@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
drivers/net/wireless/brcm80211/brcmsmac/channel.c | 118 --------------------
.../net/wireless/brcm80211/brcmsmac/phy/phy_cmn.c | 8 --
2 files changed, 0 insertions(+), 126 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
index 89ad1b7..55e9f45 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c
@@ -1153,121 +1153,6 @@ brcms_c_channel_set_chanspec(struct brcms_cm_info *wlc_cm, u16 chanspec,
&txpwr);
}
-#ifdef POWER_DBG
-static void wlc_phy_txpower_limits_dump(struct txpwr_limits *txpwr)
-{
- int i;
- char buf[80];
- char fraction[4][4] = { " ", ".25", ".5 ", ".75" };
-
- sprintf(buf, "CCK ");
- for (i = 0; i < BRCMS_NUM_RATES_CCK; i++)
- sprintf(buf[strlen(buf)], " %2d%s",
- txpwr->cck[i] / BRCMS_TXPWR_DB_FACTOR,
- fraction[txpwr->cck[i] % BRCMS_TXPWR_DB_FACTOR]);
- printk(KERN_DEBUG "%s\n", buf);
-
- sprintf(buf, "20 MHz OFDM SISO ");
- for (i = 0; i < BRCMS_NUM_RATES_OFDM; i++)
- sprintf(buf[strlen(buf)], " %2d%s",
- txpwr->ofdm[i] / BRCMS_TXPWR_DB_FACTOR,
- fraction[txpwr->ofdm[i] % BRCMS_TXPWR_DB_FACTOR]);
- printk(KERN_DEBUG "%s\n", buf);
-
- sprintf(buf, "20 MHz OFDM CDD ");
- for (i = 0; i < BRCMS_NUM_RATES_OFDM; i++)
- sprintf(buf[strlen(buf)], " %2d%s",
- txpwr->ofdm_cdd[i] / BRCMS_TXPWR_DB_FACTOR,
- fraction[txpwr->ofdm_cdd[i] % BRCMS_TXPWR_DB_FACTOR]);
- printk(KERN_DEBUG "%s\n", buf);
-
- sprintf(buf, "40 MHz OFDM SISO ");
- for (i = 0; i < BRCMS_NUM_RATES_OFDM; i++)
- sprintf(buf[strlen(buf)], " %2d%s",
- txpwr->ofdm_40_siso[i] / BRCMS_TXPWR_DB_FACTOR,
- fraction[txpwr->ofdm_40_siso[i] %
- BRCMS_TXPWR_DB_FACTOR]);
- printk(KERN_DEBUG "%s\n", buf);
-
- sprintf(buf, "40 MHz OFDM CDD ");
- for (i = 0; i < BRCMS_NUM_RATES_OFDM; i++)
- sprintf(buf[strlen(buf)], " %2d%s",
- txpwr->ofdm_40_cdd[i] / BRCMS_TXPWR_DB_FACTOR,
- fraction[txpwr->ofdm_40_cdd[i] %
- BRCMS_TXPWR_DB_FACTOR]);
- printk(KERN_DEBUG "%s\n", buf);
-
- sprintf(buf, "20 MHz MCS0-7 SISO ");
- for (i = 0; i < BRCMS_NUM_RATES_MCS_1_STREAM; i++)
- sprintf(buf[strlen(buf)], " %2d%s",
- txpwr->mcs_20_siso[i] / BRCMS_TXPWR_DB_FACTOR,
- fraction[txpwr->mcs_20_siso[i] %
- BRCMS_TXPWR_DB_FACTOR]);
- printk(KERN_DEBUG "%s\n", buf);
-
- sprintf(buf, "20 MHz MCS0-7 CDD ");
- for (i = 0; i < BRCMS_NUM_RATES_MCS_1_STREAM; i++)
- sprintf(buf[strlen(buf)], " %2d%s",
- txpwr->mcs_20_cdd[i] / BRCMS_TXPWR_DB_FACTOR,
- fraction[txpwr->mcs_20_cdd[i] %
- BRCMS_TXPWR_DB_FACTOR]);
- printk(KERN_DEBUG "%s\n", buf);
-
- sprintf(buf, "20 MHz MCS0-7 STBC ");
- for (i = 0; i < BRCMS_NUM_RATES_MCS_1_STREAM; i++)
- sprintf(buf[strlen(buf)], " %2d%s",
- txpwr->mcs_20_stbc[i] / BRCMS_TXPWR_DB_FACTOR,
- fraction[txpwr->mcs_20_stbc[i] %
- BRCMS_TXPWR_DB_FACTOR]);
- printk(KERN_DEBUG "%s\n", buf);
-
- sprintf(buf, "20 MHz MCS8-15 SDM ");
- for (i = 0; i < BRCMS_NUM_RATES_MCS_2_STREAM; i++)
- sprintf(buf[strlen(buf)], " %2d%s",
- txpwr->mcs_20_mimo[i] / BRCMS_TXPWR_DB_FACTOR,
- fraction[txpwr->mcs_20_mimo[i] %
- BRCMS_TXPWR_DB_FACTOR]);
- printk(KERN_DEBUG "%s\n", buf);
-
- sprintf(buf, "40 MHz MCS0-7 SISO ");
- for (i = 0; i < BRCMS_NUM_RATES_MCS_1_STREAM; i++)
- sprintf(buf[strlen(buf)], " %2d%s",
- txpwr->mcs_40_siso[i] / BRCMS_TXPWR_DB_FACTOR,
- fraction[txpwr->mcs_40_siso[i] %
- BRCMS_TXPWR_DB_FACTOR]);
- printk(KERN_DEBUG "%s\n", buf);
-
- sprintf(buf, "40 MHz MCS0-7 CDD ");
- for (i = 0; i < BRCMS_NUM_RATES_MCS_1_STREAM; i++)
- sprintf(buf[strlen(buf)], " %2d%s",
- txpwr->mcs_40_cdd[i] / BRCMS_TXPWR_DB_FACTOR,
- fraction[txpwr->mcs_40_cdd[i] %
- BRCMS_TXPWR_DB_FACTOR]);
- printk(KERN_DEBUG "%s\n", buf);
-
- sprintf(buf, "40 MHz MCS0-7 STBC ");
- for (i = 0; i < BRCMS_NUM_RATES_MCS_1_STREAM; i++)
- sprintf(buf[strlen(buf)], " %2d%s",
- txpwr->mcs_40_stbc[i] / BRCMS_TXPWR_DB_FACTOR,
- fraction[txpwr->mcs_40_stbc[i] %
- BRCMS_TXPWR_DB_FACTOR]);
- printk(KERN_DEBUG "%s\n", buf);
-
- sprintf(buf, "40 MHz MCS8-15 SDM ");
- for (i = 0; i < BRCMS_NUM_RATES_MCS_2_STREAM; i++)
- sprintf(buf[strlen(buf)], " %2d%s",
- txpwr->mcs_40_mimo[i] / BRCMS_TXPWR_DB_FACTOR,
- fraction[txpwr->mcs_40_mimo[i] %
- BRCMS_TXPWR_DB_FACTOR]);
- }
- printk(KERN_DEBUG "%s\n", buf);
-
- printk(KERN_DEBUG "MCS32 %2d%s\n",
- txpwr->mcs32 / BRCMS_TXPWR_DB_FACTOR,
- fraction[txpwr->mcs32 % BRCMS_TXPWR_DB_FACTOR]);
-}
-#endif /* POWER_DBG */
-
void
brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
struct txpwr_limits *txpwr)
@@ -1478,9 +1363,6 @@ brcms_c_channel_reg_limits(struct brcms_cm_info *wlc_cm, u16 chanspec,
txpwr->mcs_40_stbc[i] = txpwr->mcs_40_cdd[i];
}
-#ifdef POWER_DBG
- wlc_phy_txpower_limits_dump(txpwr);
-#endif
return;
}
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_cmn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_cmn.c
index 2faea50..e17edf7 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_cmn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_cmn.c
@@ -190,15 +190,7 @@ u16 read_radio_reg(struct brcms_phy *pi, u16 addr)
data = R_REG(&pi->regs->radioregdata);
} else {
W_REG_FLUSH(&pi->regs->phy4waddr, addr);
-
-#ifdef __ARM_ARCH_4T__
- __asm__(" .align 4 ");
- __asm__(" nop ");
- data = R_REG(&pi->regs->phy4wdatalo);
-#else
data = R_REG(&pi->regs->phy4wdatalo);
-#endif
-
}
pi->phy_wreg = 0;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
