From: Johannes Berg <johannes.berg@xxxxxxxxx>
Add the ability to advertise that the device
contains the AP SME and what features it can
support. There are currently no features in
the bitmap -- probe response offload will be
advertised by a few patches Arik is working
on now (who took over from Guy Eilam) and a
device with AP SME will typically implement
and require response offload.
Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx>
---
v2: fix attribute name (thanks Eliad)
v3: remove WSC bit
drivers/net/wireless/ath/ath6kl/init.c | 3 ++-
include/linux/nl80211.h | 15 +++++++++++++++
include/net/cfg80211.h | 6 ++++++
net/wireless/core.c | 4 ++++
net/wireless/nl80211.c | 4 ++++
5 files changed, 31 insertions(+), 1 deletion(-)
--- a/include/linux/nl80211.h 2011-11-04 11:21:17.000000000 +0100
+++ b/include/linux/nl80211.h 2011-11-07 12:35:59.000000000 +0100
@@ -1121,6 +1121,11 @@ enum nl80211_commands {
* %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
* used for asking the driver to perform a TDLS operation.
*
+ * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices
+ * that have AP support to indicate that they have the AP SME integrated
+ * with support for the features listed in this attribute, see
+ * &enum nl80211_ap_sme_features.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1349,6 +1354,8 @@ enum nl80211_attrs {
NL80211_ATTR_TDLS_SUPPORT,
NL80211_ATTR_TDLS_EXTERNAL_SETUP,
+ NL80211_ATTR_DEVICE_AP_SME,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2662,4 +2669,12 @@ enum nl80211_tdls_operation {
NL80211_TDLS_DISABLE_LINK,
};
+/*
+ * enum nl80211_ap_sme_features - device-integrated AP features
+ * Reserved for future use, no bits are defined in
+ * NL80211_ATTR_DEVICE_AP_SME yet.
+enum nl80211_ap_sme_features {
+};
+ */
+
#endif /* __LINUX_NL80211_H */
--- a/include/net/cfg80211.h 2011-11-04 11:21:17.000000000 +0100
+++ b/include/net/cfg80211.h 2011-11-07 12:31:55.000000000 +0100
@@ -1675,6 +1675,7 @@ struct cfg80211_ops {
* teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT
* command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be
* used for asking the driver/firmware to perform a TDLS operation.
+ * @WIPHY_FLAG_HAVE_AP_SME: device integrates AP SME
*/
enum wiphy_flags {
WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0),
@@ -1693,6 +1694,7 @@ enum wiphy_flags {
WIPHY_FLAG_AP_UAPSD = BIT(14),
WIPHY_FLAG_SUPPORTS_TDLS = BIT(15),
WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16),
+ WIPHY_FLAG_HAVE_AP_SME = BIT(17),
};
/**
@@ -1903,6 +1905,8 @@ struct wiphy_wowlan_support {
* may request, if implemented.
*
* @wowlan: WoWLAN support information
+ *
+ * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
*/
struct wiphy {
/* assign these fields before you register the wiphy */
@@ -1926,6 +1930,8 @@ struct wiphy {
u32 flags;
+ u32 ap_sme_capa;
+
enum cfg80211_signal_type signal_type;
int bss_priv_size;
--- a/net/wireless/core.c 2011-11-03 14:41:41.000000000 +0100
+++ b/net/wireless/core.c 2011-11-04 11:21:17.000000000 +0100
@@ -492,6 +492,10 @@ int wiphy_register(struct wiphy *wiphy)
!(wiphy->wowlan.flags & WIPHY_WOWLAN_SUPPORTS_GTK_REKEY)))
return -EINVAL;
+ if (WARN_ON(wiphy->ap_sme_capa &&
+ !(wiphy->flags & WIPHY_FLAG_HAVE_AP_SME)))
+ return -EINVAL;
+
if (WARN_ON(wiphy->addresses && !wiphy->n_addresses))
return -EINVAL;
--- a/net/wireless/nl80211.c 2011-11-04 11:21:17.000000000 +0100
+++ b/net/wireless/nl80211.c 2011-11-07 12:31:55.000000000 +0100
@@ -1007,6 +1007,10 @@ static int nl80211_send_wiphy(struct sk_
if (nl80211_put_iface_combinations(&dev->wiphy, msg))
goto nla_put_failure;
+ if (dev->wiphy.flags & WIPHY_FLAG_HAVE_AP_SME)
+ NLA_PUT_U32(msg, NL80211_ATTR_DEVICE_AP_SME,
+ dev->wiphy.ap_sme_capa);
+
return genlmsg_end(msg, hdr);
nla_put_failure:
--- a/drivers/net/wireless/ath/ath6kl/init.c 2011-11-03 14:41:41.000000000 +0100
+++ b/drivers/net/wireless/ath/ath6kl/init.c 2011-11-07 12:34:45.000000000 +0100
@@ -1548,7 +1548,8 @@ static int ath6kl_init(struct net_device
ar->conf_flags = ATH6KL_CONF_IGNORE_ERP_BARKER |
ATH6KL_CONF_ENABLE_11N | ATH6KL_CONF_ENABLE_TX_BURST;
- ar->wdev->wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM;
+ ar->wdev->wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM |
+ WIPHY_FLAG_HAVE_AP_SME;
status = ath6kl_target_config_wlan_params(ar);
if (!status)
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
