From: Franky Lin <frankyl@xxxxxxxxxxxx>
This patch is part of the abstracting chip backplane handle code
series.
Reviewed-by: Arend van Spriel <arend@xxxxxxxxxxxx>
Signed-off-by: Franky Lin <frankyl@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 117 +-------------------
.../net/wireless/brcm80211/brcmfmac/sdio_chip.c | 112 +++++++++++++++++++
.../net/wireless/brcm80211/brcmfmac/sdio_chip.h | 3 +
3 files changed, 117 insertions(+), 115 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index e05c784..d45fa32 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -3704,120 +3704,6 @@ fail:
return false;
}
-/* SDIO Pad drive strength to select value mappings */
-struct sdiod_drive_str {
- u8 strength; /* Pad Drive Strength in mA */
- u8 sel; /* Chip-specific select value */
-};
-
-/* SDIO Drive Strength to sel value table for PMU Rev 1 */
-static const struct sdiod_drive_str sdiod_drive_strength_tab1[] = {
- {
- 4, 0x2}, {
- 2, 0x3}, {
- 1, 0x0}, {
- 0, 0x0}
- };
-
-/* SDIO Drive Strength to sel value table for PMU Rev 2, 3 */
-static const struct sdiod_drive_str sdiod_drive_strength_tab2[] = {
- {
- 12, 0x7}, {
- 10, 0x6}, {
- 8, 0x5}, {
- 6, 0x4}, {
- 4, 0x2}, {
- 2, 0x1}, {
- 0, 0x0}
- };
-
-/* SDIO Drive Strength to sel value table for PMU Rev 8 (1.8V) */
-static const struct sdiod_drive_str sdiod_drive_strength_tab3[] = {
- {
- 32, 0x7}, {
- 26, 0x6}, {
- 22, 0x5}, {
- 16, 0x4}, {
- 12, 0x3}, {
- 8, 0x2}, {
- 4, 0x1}, {
- 0, 0x0}
- };
-
-#define SDIOD_DRVSTR_KEY(chip, pmu) (((chip) << 16) | (pmu))
-
-static char *brcmf_chipname(uint chipid, char *buf, uint len)
-{
- const char *fmt;
-
- fmt = ((chipid > 0xa000) || (chipid < 0x4000)) ? "%d" : "%x";
- snprintf(buf, len, fmt, chipid);
- return buf;
-}
-
-static void brcmf_sdbrcm_sdiod_drive_strength_init(struct brcmf_bus *bus,
- u32 drivestrength) {
- struct sdiod_drive_str *str_tab = NULL;
- u32 str_mask = 0;
- u32 str_shift = 0;
- char chn[8];
-
- if (!(bus->ci->cccaps & CC_CAP_PMU))
- return;
-
- switch (SDIOD_DRVSTR_KEY(bus->ci->chip, bus->ci->pmurev)) {
- case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 1):
- str_tab = (struct sdiod_drive_str *)&sdiod_drive_strength_tab1;
- str_mask = 0x30000000;
- str_shift = 28;
- break;
- case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 2):
- case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 3):
- str_tab = (struct sdiod_drive_str *)&sdiod_drive_strength_tab2;
- str_mask = 0x00003800;
- str_shift = 11;
- break;
- case SDIOD_DRVSTR_KEY(BCM4336_CHIP_ID, 8):
- str_tab = (struct sdiod_drive_str *)&sdiod_drive_strength_tab3;
- str_mask = 0x00003800;
- str_shift = 11;
- break;
- default:
- brcmf_dbg(ERROR, "No SDIO Drive strength init done for chip %s rev %d pmurev %d\n",
- brcmf_chipname(bus->ci->chip, chn, 8),
- bus->ci->chiprev, bus->ci->pmurev);
- break;
- }
-
- if (str_tab != NULL) {
- u32 drivestrength_sel = 0;
- u32 cc_data_temp;
- int i;
-
- for (i = 0; str_tab[i].strength != 0; i++) {
- if (drivestrength >= str_tab[i].strength) {
- drivestrength_sel = str_tab[i].sel;
- break;
- }
- }
-
- brcmf_sdcard_reg_write(bus->sdiodev,
- CORE_CC_REG(bus->ci->cccorebase, chipcontrol_addr),
- 4, 1);
- cc_data_temp = brcmf_sdcard_reg_read(bus->sdiodev,
- CORE_CC_REG(bus->ci->cccorebase, chipcontrol_addr), 4);
- cc_data_temp &= ~str_mask;
- drivestrength_sel <<= str_shift;
- cc_data_temp |= drivestrength_sel;
- brcmf_sdcard_reg_write(bus->sdiodev,
- CORE_CC_REG(bus->ci->cccorebase, chipcontrol_addr),
- 4, cc_data_temp);
-
- brcmf_dbg(INFO, "SDIO: %dmA drive strength selected, set to 0x%08x\n",
- drivestrength, cc_data_temp);
- }
-}
-
static bool
brcmf_sdbrcm_probe_attach(struct brcmf_bus *bus, u32 regsva)
{
@@ -3867,7 +3753,8 @@ brcmf_sdbrcm_probe_attach(struct brcmf_bus *bus, u32 regsva)
goto fail;
}
- brcmf_sdbrcm_sdiod_drive_strength_init(bus, SDIO_DRIVE_STRENGTH);
+ brcmf_sdio_chip_drivestrengthinit(bus->sdiodev, bus->ci,
+ SDIO_DRIVE_STRENGTH);
/* Get info on the SOCRAM cores... */
bus->ramsize = bus->ci->ramsize;
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
index ea12a4c..e068107 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c
@@ -52,6 +52,44 @@
#define SBIDH_VC_MASK 0xffff0000 /* vendor code */
#define SBIDH_VC_SHIFT 16
+#define SDIOD_DRVSTR_KEY(chip, pmu) (((chip) << 16) | (pmu))
+/* SDIO Pad drive strength to select value mappings */
+struct sdiod_drive_str {
+ u8 strength; /* Pad Drive Strength in mA */
+ u8 sel; /* Chip-specific select value */
+};
+/* SDIO Drive Strength to sel value table for PMU Rev 1 */
+static const struct sdiod_drive_str sdiod_drive_strength_tab1[] = {
+ {
+ 4, 0x2}, {
+ 2, 0x3}, {
+ 1, 0x0}, {
+ 0, 0x0}
+ };
+/* SDIO Drive Strength to sel value table for PMU Rev 2, 3 */
+static const struct sdiod_drive_str sdiod_drive_strength_tab2[] = {
+ {
+ 12, 0x7}, {
+ 10, 0x6}, {
+ 8, 0x5}, {
+ 6, 0x4}, {
+ 4, 0x2}, {
+ 2, 0x1}, {
+ 0, 0x0}
+ };
+/* SDIO Drive Strength to sel value table for PMU Rev 8 (1.8V) */
+static const struct sdiod_drive_str sdiod_drive_strength_tab3[] = {
+ {
+ 32, 0x7}, {
+ 26, 0x6}, {
+ 22, 0x5}, {
+ 16, 0x4}, {
+ 12, 0x3}, {
+ 8, 0x2}, {
+ 4, 0x1}, {
+ 0, 0x0}
+ };
+
static u32
brcmf_sdio_chip_corerev(struct brcmf_sdio_dev *sdiodev,
u32 corebase)
@@ -363,3 +401,77 @@ brcmf_sdio_chip_detach(struct chip_info **ci_ptr)
kfree(*ci_ptr);
*ci_ptr = NULL;
}
+
+static char *brcmf_sdio_chip_name(uint chipid, char *buf, uint len)
+{
+ const char *fmt;
+
+ fmt = ((chipid > 0xa000) || (chipid < 0x4000)) ? "%d" : "%x";
+ snprintf(buf, len, fmt, chipid);
+ return buf;
+}
+
+void
+brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
+ struct chip_info *ci, u32 drivestrength)
+{
+ struct sdiod_drive_str *str_tab = NULL;
+ u32 str_mask = 0;
+ u32 str_shift = 0;
+ char chn[8];
+
+ if (!(ci->cccaps & CC_CAP_PMU))
+ return;
+
+ switch (SDIOD_DRVSTR_KEY(ci->chip, ci->pmurev)) {
+ case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 1):
+ str_tab = (struct sdiod_drive_str *)&sdiod_drive_strength_tab1;
+ str_mask = 0x30000000;
+ str_shift = 28;
+ break;
+ case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 2):
+ case SDIOD_DRVSTR_KEY(BCM4325_CHIP_ID, 3):
+ str_tab = (struct sdiod_drive_str *)&sdiod_drive_strength_tab2;
+ str_mask = 0x00003800;
+ str_shift = 11;
+ break;
+ case SDIOD_DRVSTR_KEY(BCM4336_CHIP_ID, 8):
+ str_tab = (struct sdiod_drive_str *)&sdiod_drive_strength_tab3;
+ str_mask = 0x00003800;
+ str_shift = 11;
+ break;
+ default:
+ brcmf_dbg(ERROR, "No SDIO Drive strength init done for chip %s rev %d pmurev %d\n",
+ brcmf_sdio_chip_name(ci->chip, chn, 8),
+ ci->chiprev, ci->pmurev);
+ break;
+ }
+
+ if (str_tab != NULL) {
+ u32 drivestrength_sel = 0;
+ u32 cc_data_temp;
+ int i;
+
+ for (i = 0; str_tab[i].strength != 0; i++) {
+ if (drivestrength >= str_tab[i].strength) {
+ drivestrength_sel = str_tab[i].sel;
+ break;
+ }
+ }
+
+ brcmf_sdcard_reg_write(sdiodev,
+ CORE_CC_REG(ci->cccorebase, chipcontrol_addr),
+ 4, 1);
+ cc_data_temp = brcmf_sdcard_reg_read(sdiodev,
+ CORE_CC_REG(ci->cccorebase, chipcontrol_addr), 4);
+ cc_data_temp &= ~str_mask;
+ drivestrength_sel <<= str_shift;
+ cc_data_temp |= drivestrength_sel;
+ brcmf_sdcard_reg_write(sdiodev,
+ CORE_CC_REG(ci->cccorebase, chipcontrol_addr),
+ 4, cc_data_temp);
+
+ brcmf_dbg(INFO, "SDIO: %dmA drive strength selected, set to 0x%08x\n",
+ drivestrength, cc_data_temp);
+ }
+}
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h
index 13b09a4..e816bb6 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h
@@ -142,5 +142,8 @@ extern void brcmf_sdio_chip_coredisable(struct brcmf_sdio_dev *sdiodev,
extern int brcmf_sdio_chip_attach(struct brcmf_sdio_dev *sdiodev,
struct chip_info **ci_ptr, u32 regs);
extern void brcmf_sdio_chip_detach(struct chip_info **ci_ptr);
+extern void brcmf_sdio_chip_drivestrengthinit(struct brcmf_sdio_dev *sdiodev,
+ struct chip_info *ci,
+ u32 drivestrength);
#endif /* _BRCMFMAC_SDIO_CHIP_H_ */
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
