Search Linux Wireless

[PATCH v2 1/2] wl12xx: set scan probe requests rate according to the no_cck flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Guy Eilam <guy@xxxxxxxxxx>

Set the TX rate of probe requests during scanning according to the
no_cck flag in the scan request struct.

Signed-off-by: Guy Eilam <guy@xxxxxxxxxx>
Signed-off-by: Eliad Peller <eliad@xxxxxxxxxx>
---
v2: consider bitrate_mask

 drivers/net/wireless/wl12xx/conf.h |    4 ++++
 drivers/net/wireless/wl12xx/scan.c |   19 +++++++++++++++----
 2 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 04bb8fb..1bcfb01 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -440,6 +440,10 @@ struct conf_rx_settings {
 	CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS |      \
 	CONF_HW_BIT_RATE_54MBPS)
 
+#define CONF_TX_CCK_RATES  (CONF_HW_BIT_RATE_1MBPS |		\
+	CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS |	\
+	CONF_HW_BIT_RATE_11MBPS)
+
 #define CONF_TX_OFDM_RATES (CONF_HW_BIT_RATE_6MBPS |             \
 	CONF_HW_BIT_RATE_12MBPS | CONF_HW_BIT_RATE_24MBPS |      \
 	CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS |      \
diff --git a/drivers/net/wireless/wl12xx/scan.c b/drivers/net/wireless/wl12xx/scan.c
index fb2c431..de82ccf 100644
--- a/drivers/net/wireless/wl12xx/scan.c
+++ b/drivers/net/wireless/wl12xx/scan.c
@@ -203,7 +203,6 @@ static int wl1271_scan_send(struct wl1271 *wl, struct ieee80211_vif *vif,
 
 	cmd->params.tx_rate = cpu_to_le32(basic_rate);
 	cmd->params.n_probe_reqs = wl->conf.scan.num_probe_reqs;
-	cmd->params.tx_rate = cpu_to_le32(basic_rate);
 	cmd->params.tid_trigger = 0;
 	cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
 
@@ -255,7 +254,7 @@ void wl1271_scan_stm(struct wl1271 *wl, struct ieee80211_vif *vif)
 	struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
 	int ret = 0;
 	enum ieee80211_band band;
-	u32 rate;
+	u32 rate, mask;
 
 	switch (wl->scan.state) {
 	case WL1271_SCAN_STATE_IDLE:
@@ -263,7 +262,13 @@ void wl1271_scan_stm(struct wl1271 *wl, struct ieee80211_vif *vif)
 
 	case WL1271_SCAN_STATE_2GHZ_ACTIVE:
 		band = IEEE80211_BAND_2GHZ;
-		rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]);
+		mask = wlvif->bitrate_masks[band];
+		if (wl->scan.req->no_cck) {
+			mask &= ~CONF_TX_CCK_RATES;
+			if (!mask)
+				mask = CONF_TX_RATE_MASK_BASIC_P2P;
+		}
+		rate = wl1271_tx_min_rate_get(wl, mask);
 		ret = wl1271_scan_send(wl, vif, band, false, rate);
 		if (ret == WL1271_NOTHING_TO_SCAN) {
 			wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE;
@@ -274,7 +279,13 @@ void wl1271_scan_stm(struct wl1271 *wl, struct ieee80211_vif *vif)
 
 	case WL1271_SCAN_STATE_2GHZ_PASSIVE:
 		band = IEEE80211_BAND_2GHZ;
-		rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]);
+		mask = wlvif->bitrate_masks[band];
+		if (wl->scan.req->no_cck) {
+			mask &= ~CONF_TX_CCK_RATES;
+			if (!mask)
+				mask = CONF_TX_RATE_MASK_BASIC_P2P;
+		}
+		rate = wl1271_tx_min_rate_get(wl, mask);
 		ret = wl1271_scan_send(wl, vif, band, true, rate);
 		if (ret == WL1271_NOTHING_TO_SCAN) {
 			if (wl->enable_11a)
-- 
1.7.6.401.g6a319

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux