This is in preparation for cutpower suspend feature. HIF layer makes
the decision based on information provided by cfg80211 and what hardware
actually supports. Then it calls ath6kl_cfg80211_suspend() to enable
the chosen mode.
Functionality should be the same, this is just preparation for
more suspend modes (cutpower and wow).
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath6kl/cfg80211.c | 46 ++++++++++++++++++++++++++--
drivers/net/wireless/ath/ath6kl/cfg80211.h | 8 +++++
drivers/net/wireless/ath/ath6kl/core.h | 1 -
drivers/net/wireless/ath/ath6kl/main.c | 12 -------
drivers/net/wireless/ath/ath6kl/sdio.c | 9 +----
5 files changed, 52 insertions(+), 24 deletions(-)
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 94038cb..0691a95 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -1653,8 +1653,46 @@ static int ath6kl_flush_pmksa(struct wiphy *wiphy, struct net_device *netdev)
return 0;
}
+int ath6kl_cfg80211_suspend(struct ath6kl *ar,
+ enum ath6kl_cfg_suspend_mode mode)
+{
+ int ret;
+
+ ath6kl_cfg80211_stop(ar);
+
+ switch (mode) {
+ case ATH6KL_CFG_SUSPEND_DEEPSLEEP:
+ /* save the current power mode before enabling power save */
+ ar->wmi->saved_pwr_mode = ar->wmi->pwr_mode;
+
+ ret = ath6kl_wmi_powermode_cmd(ar->wmi, 0, REC_POWER);
+ if (ret) {
+ ath6kl_warn("wmi powermode command failed during suspend: %d\n",
+ ret);
+ }
+
+ break;
+ }
+
+ return 0;
+}
+
+int ath6kl_cfg80211_resume(struct ath6kl *ar)
+{
+ if (ar->wmi->pwr_mode != ar->wmi->saved_pwr_mode) {
+ if (ath6kl_wmi_powermode_cmd(ar->wmi, 0,
+ ar->wmi->saved_pwr_mode) != 0)
+ ath6kl_warn("ath6kl_sdio_resume: "
+ "wmi_powermode_cmd failed\n");
+ }
+
+ return 0;
+}
+
#ifdef CONFIG_PM
-static int ar6k_cfg80211_suspend(struct wiphy *wiphy,
+
+/* hif layer decides what suspend mode to use */
+static int __ath6kl_cfg80211_suspend(struct wiphy *wiphy,
struct cfg80211_wowlan *wow)
{
struct ath6kl *ar = wiphy_priv(wiphy);
@@ -1662,7 +1700,7 @@ static int ar6k_cfg80211_suspend(struct wiphy *wiphy,
return ath6kl_hif_suspend(ar);
}
-static int ar6k_cfg80211_resume(struct wiphy *wiphy)
+static int __ath6kl_cfg80211_resume(struct wiphy *wiphy)
{
struct ath6kl *ar = wiphy_priv(wiphy);
@@ -2098,8 +2136,8 @@ static struct cfg80211_ops ath6kl_cfg80211_ops = {
.flush_pmksa = ath6kl_flush_pmksa,
CFG80211_TESTMODE_CMD(ath6kl_tm_cmd)
#ifdef CONFIG_PM
- .suspend = ar6k_cfg80211_suspend,
- .resume = ar6k_cfg80211_resume,
+ .suspend = __ath6kl_cfg80211_suspend,
+ .resume = __ath6kl_cfg80211_resume,
#endif
.set_channel = ath6kl_set_channel,
.add_beacon = ath6kl_add_beacon,
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.h b/drivers/net/wireless/ath/ath6kl/cfg80211.h
index bb0ac22..3630c5e 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.h
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.h
@@ -17,6 +17,10 @@
#ifndef ATH6KL_CFG80211_H
#define ATH6KL_CFG80211_H
+enum ath6kl_cfg_suspend_mode {
+ ATH6KL_CFG_SUSPEND_DEEPSLEEP,
+};
+
struct net_device *ath6kl_interface_add(struct ath6kl *ar, char *name,
enum nl80211_iftype type,
u8 fw_vif_idx, u8 nw_type);
@@ -40,6 +44,10 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
void ath6kl_cfg80211_tkip_micerr_event(struct ath6kl_vif *vif, u8 keyid,
bool ismcast);
+int ath6kl_cfg80211_suspend(struct ath6kl *ar,
+ enum ath6kl_cfg_suspend_mode mode);
+int ath6kl_cfg80211_resume(struct ath6kl *ar);
+
void ath6kl_cfg80211_stop(struct ath6kl *ar);
#endif /* ATH6KL_CFG80211_H */
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 95aed7d..00cc1db 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -649,7 +649,6 @@ void ath6kl_pspoll_event(struct ath6kl_vif *vif, u8 aid);
void ath6kl_dtimexpiry_event(struct ath6kl_vif *vif);
void ath6kl_disconnect(struct ath6kl_vif *vif);
-void ath6kl_deep_sleep_enable(struct ath6kl *ar);
void aggr_recv_delba_req_evt(struct ath6kl_vif *vif, u8 tid);
void aggr_recv_addba_req_evt(struct ath6kl_vif *vif, u8 tid, u16 seq_no,
u8 win_sz);
diff --git a/drivers/net/wireless/ath/ath6kl/main.c b/drivers/net/wireless/ath/ath6kl/main.c
index 378dc8d..23da82e 100644
--- a/drivers/net/wireless/ath/ath6kl/main.c
+++ b/drivers/net/wireless/ath/ath6kl/main.c
@@ -578,18 +578,6 @@ void ath6kl_disconnect(struct ath6kl_vif *vif)
}
}
-void ath6kl_deep_sleep_enable(struct ath6kl *ar)
-{
- ath6kl_cfg80211_stop(ar);
-
- /* save the current power mode before enabling power save */
- ar->wmi->saved_pwr_mode = ar->wmi->pwr_mode;
-
- if (ath6kl_wmi_powermode_cmd(ar->wmi, 0, REC_POWER) != 0)
- ath6kl_warn("ath6kl_deep_sleep_enable: "
- "wmi_powermode_cmd failed\n");
-}
-
/* WMI Event handlers */
static const char *get_hw_id_string(u32 id)
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index c61c512..d718926 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -757,19 +757,14 @@ static int ath6kl_sdio_suspend(struct ath6kl *ar)
return ret;
}
- ath6kl_deep_sleep_enable(ar);
+ ath6kl_cfg80211_suspend(ar, ATH6KL_CFG_SUSPEND_DEEPSLEEP);
return 0;
}
static int ath6kl_sdio_resume(struct ath6kl *ar)
{
- if (ar->wmi->pwr_mode != ar->wmi->saved_pwr_mode) {
- if (ath6kl_wmi_powermode_cmd(ar->wmi, 0,
- ar->wmi->saved_pwr_mode) != 0)
- ath6kl_warn("ath6kl_sdio_resume: "
- "wmi_powermode_cmd failed\n");
- }
+ ath6kl_cfg80211_resume(ar);
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
