Virtual interface information need to be configured during init time to the target. Currently maximum of 3 vifs (STA, P2P dev and P2P go/client). Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@xxxxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath6kl/init.c | 33 +++++++++++++++++++++++------ drivers/net/wireless/ath/ath6kl/target.h | 3 ++ 2 files changed, 29 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c index acd4455..1197ab6 100644 --- a/drivers/net/wireless/ath/ath6kl/init.c +++ b/drivers/net/wireless/ath/ath6kl/init.c @@ -429,10 +429,31 @@ static int ath6kl_target_config_wlan_params(struct ath6kl *ar) int ath6kl_configure_target(struct ath6kl *ar) { u32 param, ram_reserved_size; - u8 fw_iftype; + u8 fw_iftype, fw_mode = 0, fw_submode; + int i; + /* + * Note: Even though the firmware interface type is + * chosen as BSS_STA for all three interfaces, can + * be configured to IBSS/AP as long as the fw submode + * remains normal mode (0 - AP, STA and IBSS). + */ fw_iftype = HI_OPTION_FW_MODE_BSS_STA; + for (i = 0; i < MAX_NUM_VIF; i++) + fw_mode |= fw_iftype << (i * HI_OPTION_FW_MODE_BITS); + + /* + * submodes : vif[0] - AP/STA/IBSS + * vif[1] - "P2P dev"/"P2P GO"/"P2P Client" + * vif[2] - "P2P dev"/"P2P GO"/"P2P Client" + */ + fw_submode = HI_OPTION_FW_SUBMODE_NONE | + (HI_OPTION_FW_SUBMODE_P2PDEV << + (1 * HI_OPTION_FW_SUBMODE_BITS)) | + (HI_OPTION_FW_SUBMODE_P2PDEV << + (2 * HI_OPTION_FW_SUBMODE_BITS)); + /* Tell target which HTC version it is used*/ param = HTC_PROTOCOL_VERSION; if (ath6kl_bmi_write(ar, @@ -454,12 +475,10 @@ int ath6kl_configure_target(struct ath6kl *ar) return -EIO; } - param |= (1 << HI_OPTION_NUM_DEV_SHIFT); - param |= (fw_iftype << HI_OPTION_FW_MODE_SHIFT); - if (ar->p2p && fw_iftype == HI_OPTION_FW_MODE_BSS_STA) { - param |= HI_OPTION_FW_SUBMODE_P2PDEV << - HI_OPTION_FW_SUBMODE_SHIFT; - } + param |= (MAX_NUM_VIF << HI_OPTION_NUM_DEV_SHIFT); + param |= fw_mode << HI_OPTION_FW_MODE_SHIFT; + param |= fw_submode << HI_OPTION_FW_SUBMODE_SHIFT; + param |= (0 << HI_OPTION_MAC_ADDR_METHOD_SHIFT); param |= (0 << HI_OPTION_FW_BRIDGE_SHIFT); diff --git a/drivers/net/wireless/ath/ath6kl/target.h b/drivers/net/wireless/ath/ath6kl/target.h index c9a7605..687e2b3 100644 --- a/drivers/net/wireless/ath/ath6kl/target.h +++ b/drivers/net/wireless/ath/ath6kl/target.h @@ -320,7 +320,10 @@ struct host_interest { | (2) | (2) | (2) | (2) | (2) | (2) | (2) | (2) |------------------------------------------------------------------------------| */ +#define HI_OPTION_FW_MODE_BITS 0x2 #define HI_OPTION_FW_MODE_SHIFT 0xC + +#define HI_OPTION_FW_SUBMODE_BITS 0x2 #define HI_OPTION_FW_SUBMODE_SHIFT 0x14 /* Convert a Target virtual address into a Target physical address */ -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html