Notify the userspace of the probe response offloading
support by the driver.
Signed-off-by: Guy Eilam <guy@xxxxxxxxxx>
---
v2:
use struct wiphy instead of a function pointer
this change made the previous second PATCH:
"Get the probe response offloading support from the driver" irrelevant
changed WPS to WSC
include/linux/nl80211.h | 24 ++++++++++++++++++++++++
include/net/cfg80211.h | 5 +++++
net/wireless/nl80211.c | 5 +++++
3 files changed, 34 insertions(+), 0 deletions(-)
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index 9d797f2..c1f0a3d 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1109,6 +1109,11 @@ enum nl80211_commands {
* %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
* used for asking the driver to perform a TDLS operation.
*
+ * @NL80211_ATTR_PROBE_RESP_OFFLOAD_SUPPORT: Indicates the support
+ * of probe response offloading by the driver/firmware.
+ * In addition this attribute holds a bitmap of the supported protocols
+ * for offloading using &enum nl80211_probe_resp_offload_support_attr.
+ *
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
*/
@@ -1337,6 +1342,8 @@ enum nl80211_attrs {
NL80211_ATTR_TDLS_SUPPORT,
NL80211_ATTR_TDLS_EXTERNAL_SETUP,
+ NL80211_ATTR_PROBE_RESP_OFFLOAD_SUPPORT,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -2648,4 +2655,21 @@ enum nl80211_tdls_operation {
NL80211_TDLS_DISABLE_LINK,
};
+/**
+ * enum nl80211_probe_resp_offload_support_attr - definition of optional
+ * supported protocols for probe response offloading by the driver/firmware
+ * to be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD_SUPPORT
+ * attribute. Each enum value represents a bit in the bitmap of
+ * supported protocols.
+ *
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WSC: Support for WSC ver. 1
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WSC2: Support for WSC ver. 2
+ * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P
+ */
+enum nl80211_probe_resp_offload_support_attr {
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WSC = 1<<0,
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WSC2 = 1<<1,
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2,
+};
+
#endif /* __LINUX_NL80211_H */
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 74f4f85..c9f69a6 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1690,6 +1690,7 @@ enum wiphy_flags {
WIPHY_FLAG_AP_UAPSD = BIT(14),
WIPHY_FLAG_SUPPORTS_TDLS = BIT(15),
WIPHY_FLAG_TDLS_EXTERNAL_SETUP = BIT(16),
+ WIPHY_FLAG_SUPPORT_PROBE_RESP_OFFLOAD = BIT(17),
};
/**
@@ -1953,6 +1954,10 @@ struct wiphy {
u32 available_antennas_tx;
u32 available_antennas_rx;
+ /* bitmap of supported protocols for probe response offloading
+ * see enum nl80211_probe_resp_offload_support_attr */
+ u32 probe_resp_offload;
+
/* If multiple wiphys are registered and you're handed e.g.
* a regular netdev with assigned ieee80211_ptr, you won't
* know whether it points to a wiphy your driver has registered
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index edf655a..71d36ed 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -759,6 +759,11 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX,
dev->wiphy.available_antennas_rx);
+ if (dev->wiphy.flags & WIPHY_FLAG_SUPPORT_PROBE_RESP_OFFLOAD)
+ NLA_PUT_U32(msg,
+ NL80211_ATTR_PROBE_RESP_OFFLOAD_SUPPORT,
+ dev->wiphy.probe_resp_offload);
+
if ((dev->wiphy.available_antennas_tx ||
dev->wiphy.available_antennas_rx) && dev->ops->get_antenna) {
u32 tx_ant = 0, rx_ant = 0;
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
