Search Linux Wireless

Re: ath9k: irq storm after suspend/resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Sat, Oct 22, 2011 at 08:47:33AM +0800, Adrian Chadd wrote:
> 
> At this point I'd really suggest whacking other devices into the slot
> to see if they generate the same kind of behaviour.

Looks like you had it right from the start. After unloading the jme
module [*1*] I cannot reproduce the IRQ storm any more. From
looking at dmesg it should have been obvious, since it also gets
IRQ 17 assigned. I don't know how I missed that, I was sure I had
checked.

Sorry guys, for most likely wasting your time. And thanks for your
patience.

Best,
Clemens

[*1*]

$ lspci
06:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03))

$ dmesg|grep -i jme
[    6.160187] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    6.160278] jme 0000:06:00.5: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    6.160305] jme 0000:06:00.5: setting latency timer to 64
[    6.161154] jme 0000:06:00.5: eth0: JMC250 Gigabit Ethernet chiprev:23 pcirev:3 macaddr:bc:ae:c5:2f:91:47
[   18.354697] jme 0000:06:00.5: PCI INT A disabled
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux