Search Linux Wireless

[PATCH 13/22] brcm80211: use endian annotation for scan time configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



For scanning several timeout parameters are configured on the device.
These parameters have been endian annotated and converted appropriately.

Reported-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Reviewed-by: Roland Vossen <rvossen@xxxxxxxxxxxx>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@xxxxxxxxxxxx>
Signed-off-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
 .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c  |   11 +++++++----
 1 files changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index 8fc8173..1b09be0 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -3497,12 +3497,15 @@ dongle_rom_out:
 
 static s32
 brcmf_dongle_scantime(struct net_device *ndev, s32 scan_assoc_time,
-		s32 scan_unassoc_time, s32 scan_passive_time)
+		      s32 scan_unassoc_time, s32 scan_passive_time)
 {
 	s32 err = 0;
+	__le32 scan_assoc_tm_le = cpu_to_le32(scan_assoc_time);
+	__le32 scan_unassoc_tm_le = cpu_to_le32(scan_unassoc_time);
+	__le32 scan_passive_tm_le = cpu_to_le32(scan_passive_time);
 
 	err = brcmf_exec_dcmd(ndev, BRCMF_C_SET_SCAN_CHANNEL_TIME,
-			   &scan_assoc_time, sizeof(scan_assoc_time));
+			   &scan_assoc_tm_le, sizeof(scan_assoc_tm_le));
 	if (err) {
 		if (err == -EOPNOTSUPP)
 			WL_INFO("Scan assoc time is not supported\n");
@@ -3511,7 +3514,7 @@ brcmf_dongle_scantime(struct net_device *ndev, s32 scan_assoc_time,
 		goto dongle_scantime_out;
 	}
 	err = brcmf_exec_dcmd(ndev, BRCMF_C_SET_SCAN_UNASSOC_TIME,
-			   &scan_unassoc_time, sizeof(scan_unassoc_time));
+			   &scan_unassoc_tm_le, sizeof(scan_unassoc_tm_le));
 	if (err) {
 		if (err == -EOPNOTSUPP)
 			WL_INFO("Scan unassoc time is not supported\n");
@@ -3521,7 +3524,7 @@ brcmf_dongle_scantime(struct net_device *ndev, s32 scan_assoc_time,
 	}
 
 	err = brcmf_exec_dcmd(ndev, BRCMF_C_SET_SCAN_PASSIVE_TIME,
-			   &scan_passive_time, sizeof(scan_passive_time));
+			   &scan_passive_tm_le, sizeof(scan_passive_tm_le));
 	if (err) {
 		if (err == -EOPNOTSUPP)
 			WL_INFO("Scan passive time is not supported\n");
-- 
1.7.4.1


--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux