Pass an argument to decide whether to reuse the Tx IQ
calibration measurements or not during fast channel change.
This will be later used by MCI support for AR9480.
Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 15 +++++++++------
1 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 026aa5b..6d68566 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -659,7 +659,8 @@ static void ar9003_hw_detect_outlier(int *mp_coeff, int nmeasurement,
static void ar9003_hw_tx_iqcal_load_avg_2_passes(struct ath_hw *ah,
u8 num_chains,
- struct coeff *coeff)
+ struct coeff *coeff,
+ bool is_reusable)
{
int i, im, nmeasurement;
u32 tx_corr_coeff[MAX_MEASUREMENT][AR9300_MAX_CHAINS];
@@ -726,11 +727,11 @@ static void ar9003_hw_tx_iqcal_load_avg_2_passes(struct ath_hw *ah,
AR_PHY_TX_IQCAL_CONTROL_3_IQCORR_EN, 0x1);
REG_RMW_FIELD(ah, AR_PHY_RX_IQCAL_CORR_B0,
AR_PHY_RX_IQCAL_CORR_B0_LOOPBACK_IQCORR_EN, 0x1);
+
if (caldata)
- caldata->done_txiqcal_once = true;
+ caldata->done_txiqcal_once = is_reusable;
return;
-
}
static bool ar9003_hw_tx_iq_cal_run(struct ath_hw *ah)
@@ -757,7 +758,7 @@ static bool ar9003_hw_tx_iq_cal_run(struct ath_hw *ah)
return true;
}
-static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah)
+static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah, bool is_reusable)
{
struct ath_common *common = ath9k_hw_common(ah);
const u32 txiqcal_status[AR9300_MAX_CHAINS] = {
@@ -846,7 +847,8 @@ static void ar9003_hw_tx_iq_cal_post_proc(struct ath_hw *ah)
coeff.phs_coeff[i][im] -= 128;
}
}
- ar9003_hw_tx_iqcal_load_avg_2_passes(ah, num_chains, &coeff);
+ ar9003_hw_tx_iqcal_load_avg_2_passes(ah, num_chains,
+ &coeff, is_reusable);
return;
@@ -904,6 +906,7 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
struct ath_common *common = ath9k_hw_common(ah);
struct ath9k_hw_cal_data *caldata = ah->caldata;
bool txiqcal_done = false;
+ bool is_reusable = true;
/* Do Tx IQ Calibration */
REG_RMW_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_1,
@@ -943,7 +946,7 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah,
}
if (txiqcal_done)
- ar9003_hw_tx_iq_cal_post_proc(ah);
+ ar9003_hw_tx_iq_cal_post_proc(ah, is_reusable);
else if (caldata && caldata->done_txiqcal_once)
ar9003_hw_tx_iq_cal_reload(ah);
--
1.7.7
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
