The current wl12xx fw supports both STA and AP
mode, and we no longer use AP-mode-specific quirks.
WL12XX_QUIRK_END_OF_TRANSACTION is still used for
certain HWs, while WL12XX_QUIRK_LPD_MODE is not
used anymore.
Signed-off-by: Eliad Peller <eliad@xxxxxxxxxx>
---
drivers/net/wireless/wl12xx/boot.c | 3 ---
drivers/net/wireless/wl12xx/cmd.c | 5 -----
drivers/net/wireless/wl12xx/main.c | 8 --------
drivers/net/wireless/wl12xx/wl12xx.h | 6 ------
4 files changed, 0 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index 6d5664b..e5b7009 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -769,9 +769,6 @@ int wl1271_load_firmware(struct wl1271 *wl)
clk |= (wl->ref_clock << 1) << 4;
}
- if (wl->quirks & WL12XX_QUIRK_LPD_MODE)
- clk |= SCRATCH_ENABLE_LPD;
-
wl1271_write32(wl, DRPW_SCRATCH_START, clk);
wl1271_set_partition(wl, &part_table[PART_WORK]);
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index 287fe95..53eb858 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -134,11 +134,6 @@ int wl1271_cmd_general_parms(struct wl1271 *wl)
/* Override the REF CLK from the NVS with the one from platform data */
gen_parms->general_params.ref_clock = wl->ref_clock;
- /* LPD mode enable (bits 6-7) in WL1271 AP mode only */
- if (wl->quirks & WL12XX_QUIRK_LPD_MODE)
- gen_parms->general_params.general_settings |=
- GENERAL_SETTINGS_DRPW_LPD;
-
ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
if (ret < 0) {
wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c
index 60e2869..0aac62f 100644
--- a/drivers/net/wireless/wl12xx/main.c
+++ b/drivers/net/wireless/wl12xx/main.c
@@ -1333,14 +1333,6 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
wl->chip.id);
- /*
- * 'end-of-transaction flag' and 'LPD mode flag'
- * should be set in wl127x AP mode only
- */
- if (wl->bss_type == BSS_TYPE_AP_BSS)
- wl->quirks |= (WL12XX_QUIRK_END_OF_TRANSACTION |
- WL12XX_QUIRK_LPD_MODE);
-
ret = wl1271_setup(wl);
if (ret < 0)
goto out;
diff --git a/drivers/net/wireless/wl12xx/wl12xx.h b/drivers/net/wireless/wl12xx/wl12xx.h
index 997f532..781ab3a 100644
--- a/drivers/net/wireless/wl12xx/wl12xx.h
+++ b/drivers/net/wireless/wl12xx/wl12xx.h
@@ -671,12 +671,6 @@ size_t wl12xx_copy_fwlog(struct wl1271 *wl, u8 *memblock, size_t maxlen);
/* WL128X requires aggregated packets to be aligned to the SDIO block size */
#define WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT BIT(2)
-/*
- * WL127X AP mode requires Low Power DRPw (LPD) enable to reduce power
- * consumption
- */
-#define WL12XX_QUIRK_LPD_MODE BIT(3)
-
/* Older firmwares did not implement the FW logger over bus feature */
#define WL12XX_QUIRK_FWLOG_NOT_IMPLEMENTED BIT(4)
--
1.7.6.401.g6a319
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
