Signed-off-by: Luis R. Rodriguez <mcgrof@xxxxxxxxxxxxxxxx>
---
nl80211.h | 168 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 166 insertions(+), 2 deletions(-)
diff --git a/nl80211.h b/nl80211.h
index 0343504..3d7f468 100644
--- a/nl80211.h
+++ b/nl80211.h
@@ -238,6 +238,8 @@
*
* @NL80211_CMD_GET_SCAN: get scan results
* @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
+ * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ * probe requests at CCK rate or not.
* @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
* NL80211_CMD_GET_SCAN and on the "scan" multicast group)
* @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons,
@@ -432,6 +434,8 @@
* specified using %NL80211_ATTR_DURATION. When called, this operation
* returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the
* TX status event pertaining to the TX request.
+ * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
+ * management frames at CCK rate or not in 2GHz band.
* @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this
* command may be used with the corresponding cookie to cancel the wait
* time if it is known that it is no longer necessary.
@@ -499,6 +503,12 @@
* this command may also be sent by the driver as an MLME event to
* inform userspace of the new replay counter.
*
+ * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace
+ * of PMKSA caching dandidates.
+ *
+ * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup).
+ * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@@ -623,6 +633,11 @@ enum nl80211_commands {
NL80211_CMD_SET_REKEY_OFFLOAD,
+ NL80211_CMD_PMKSA_CANDIDATE,
+
+ NL80211_CMD_TDLS_OPER,
+ NL80211_CMD_TDLS_MGMT,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@@ -769,6 +784,8 @@ enum nl80211_commands {
* that can be added to a scan request
* @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information
* elements that can be added to a scheduled scan request
+ * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be
+ * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute.
*
* @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz)
* @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive
@@ -1011,6 +1028,24 @@ enum nl80211_commands {
* @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan
* cycles, in msecs.
+
+ * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more
+ * sets of attributes to match during scheduled scans. Only BSSs
+ * that match any of the sets will be reported. These are
+ * pass-thru filter rules.
+ * For a match to succeed, the BSS must match all attributes of a
+ * set. Since not every hardware supports matching all types of
+ * attributes, there is no guarantee that the reported BSSs are
+ * fully complying with the match sets and userspace needs to be
+ * able to ignore them by itself.
+ * Thus, the implementation is somewhat hardware-dependent, but
+ * this is only an optimization and the userspace application
+ * needs to handle all the non-filtered results anyway.
+ * If the match attributes don't make sense when combined with
+ * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID
+ * is included in the probe request, but the match attributes
+ * will never let it go through), -EINVAL may be returned.
+ * If ommited, no filtering is done.
*
* @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported
* interface combinations. In each nested item, it contains attributes
@@ -1044,6 +1079,39 @@ enum nl80211_commands {
*
* @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration
* of the station, see &enum nl80211_sta_wme_attr.
+ * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working
+ * as AP.
+ *
+ * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of
+ * roaming to another AP in the same ESS if the signal lever is low.
+ *
+ * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching
+ * candidate information, see &enum nl80211_pmksa_candidate_attr.
+ *
+ * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not
+ * for management frames transmission. In order to avoid p2p probe/action
+ * frames are being transmitted at CCK rate in 2GHz band, the user space
+ * applications use this attribute.
+ * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and
+ * %NL80211_CMD_FRAME commands.
+ *
+ * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup
+ * request, link setup confirm, link teardown, etc.). Values are
+ * described in the TDLS (802.11z) specification.
+ * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a
+ * TDLS conversation between two devices.
+ * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see
+ * &enum nl80211_tdls_operation, represented as a u8.
+ * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate
+ * as a TDLS peer sta.
+ * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown
+ * procedures should be performed by sending TDLS packets via
+ * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be
+ * used for asking the driver to perform a TDLS operation.
+ *
+ * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country
+ * abides to when initiating radiation on DFS channels. A country maps
+ * to one DFS region.
*
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -1256,6 +1324,24 @@ enum nl80211_attrs {
NL80211_ATTR_IE_ASSOC_RESP,
NL80211_ATTR_STA_WME,
+ NL80211_ATTR_SUPPORT_AP_UAPSD,
+
+ NL80211_ATTR_ROAM_SUPPORT,
+
+ NL80211_ATTR_SCHED_SCAN_MATCH,
+ NL80211_ATTR_MAX_MATCH_SETS,
+
+ NL80211_ATTR_PMKSA_CANDIDATE,
+
+ NL80211_ATTR_TX_NO_CCK_RATE,
+
+ NL80211_ATTR_TDLS_ACTION,
+ NL80211_ATTR_TDLS_DIALOG_TOKEN,
+ NL80211_ATTR_TDLS_OPERATION,
+ NL80211_ATTR_TDLS_SUPPORT,
+ NL80211_ATTR_TDLS_EXTERNAL_SETUP,
+
+ NL80211_ATTR_DFS_REGION,
/* add attributes here, update the policy in nl80211.c */
@@ -1354,6 +1440,7 @@ enum nl80211_iftype {
* @NL80211_STA_FLAG_WME: station is WME/QoS capable
* @NL80211_STA_FLAG_MFP: station uses management frame protection
* @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated
+ * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer
* @NL80211_STA_FLAG_MAX: highest station flag number currently defined
* @__NL80211_STA_FLAG_AFTER_LAST: internal use
*/
@@ -1364,6 +1451,7 @@ enum nl80211_sta_flags {
NL80211_STA_FLAG_WME,
NL80211_STA_FLAG_MFP,
NL80211_STA_FLAG_AUTHENTICATED,
+ NL80211_STA_FLAG_TDLS_PEER,
/* keep last */
__NL80211_STA_FLAG_AFTER_LAST,
@@ -1716,6 +1804,26 @@ enum nl80211_reg_rule_attr {
};
/**
+ * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
+ * only report BSS with matching SSID.
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
+ * attribute number currently defined
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_sched_scan_match_attr {
+ __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID,
+
+ NL80211_ATTR_SCHED_SCAN_MATCH_SSID,
+
+ /* keep last */
+ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
+ NL80211_SCHED_SCAN_MATCH_ATTR_MAX =
+ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1
+};
+
+/**
* enum nl80211_reg_rule_flags - regulatory rule flags
*
* @NL80211_RRF_NO_OFDM: OFDM modulation not allowed
@@ -1741,6 +1849,21 @@ enum nl80211_reg_rule_flags {
};
/**
+ * enum nl80211_dfs_regions - regulatory DFS regions
+ *
+ * @NL80211_DFS_UNSET: Country has no DFS master region specified
+ * @NL80211_DFS_FCC_: Country follows DFS master rules from FCC
+ * @NL80211_DFS_FCC_: Country follows DFS master rules from ETSI
+ * @NL80211_DFS_JP_: Country follows DFS master rules from JP/MKK/Telec
+ */
+enum nl80211_cflags {
+ NL80211_DFS_UNSET = 0,
+ NL80211_DFS_FCC = 1,
+ NL80211_DFS_ETSI = 2,
+ NL80211_DFS_JP = 3,
+};
+
+/**
* enum nl80211_survey_info - survey information
*
* These attribute types are used with %NL80211_ATTR_SURVEY_INFO
@@ -2490,8 +2613,10 @@ enum nl80211_hidden_ssid {
/**
* enum nl80211_sta_wme_attr - station WME attributes
* @__NL80211_STA_WME_INVALID: invalid number for nested attribute
- * @NL80211_STA_WME_QUEUES: bitmap of uapsd queues.
- * @NL80211_STA_WME_MAX_SP: max service period.
+ * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format
+ * is the same as the AC bitmap in the QoS info field.
+ * @NL80211_STA_WME_MAX_SP: max service period. the format is the same
+ * as the MAX_SP field in the QoS info field (but already shifted down).
* @__NL80211_STA_WME_AFTER_LAST: internal
* @NL80211_STA_WME_MAX: highest station WME attribute
*/
@@ -2505,4 +2630,43 @@ enum nl80211_sta_wme_attr {
NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1
};
+/**
+ * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates
+ * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes
+ * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher
+ * priority)
+ * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets)
+ * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag)
+ * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes
+ * (internal)
+ * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute
+ * (internal)
+ */
+enum nl80211_pmksa_candidate_attr {
+ __NL80211_PMKSA_CANDIDATE_INVALID,
+ NL80211_PMKSA_CANDIDATE_INDEX,
+ NL80211_PMKSA_CANDIDATE_BSSID,
+ NL80211_PMKSA_CANDIDATE_PREAUTH,
+
+ /* keep last */
+ NUM_NL80211_PMKSA_CANDIDATE,
+ MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1
+};
+
+/**
+ * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION
+ * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request
+ * @NL80211_TDLS_SETUP: Setup TDLS link
+ * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established
+ * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link
+ * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link
+ */
+enum nl80211_tdls_operation {
+ NL80211_TDLS_DISCOVERY_REQ,
+ NL80211_TDLS_SETUP,
+ NL80211_TDLS_TEARDOWN,
+ NL80211_TDLS_ENABLE_LINK,
+ NL80211_TDLS_DISABLE_LINK,
+};
+
#endif /* __LINUX_NL80211_H */
--
1.7.4.15.g7811d
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
