Search Linux Wireless

Re: [RFC 2/6] ath9k: add DFS debug flag

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 3, 2011 at 3:29 AM, Zefir Kurtisi <zefir.kurtisi@xxxxxxxxxxx> wrote:
>
> Signed-off-by: Zefir Kurtisi <zefir.kurtisi@xxxxxxxxxxx>
> ---
>  drivers/net/wireless/ath/ath.h |   34 ++++++++++++++++++----------------
>  1 files changed, 18 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
> index 6d56532..34d4da1 100644
> --- a/drivers/net/wireless/ath/ath.h
> +++ b/drivers/net/wireless/ath/ath.h
> @@ -211,6 +211,7 @@ ath_printk(const char *level, struct ath_common *common, const char *fmt, ...);
>  * @ATH_DBG_HWTIMER: hardware timer handling
>  * @ATH_DBG_BTCOEX: bluetooth coexistance
>  * @ATH_DBG_BSTUCK: stuck beacons
> + * @ATH_DBG_DFS: radar datection
>  * @ATH_DBG_ANY: enable all debugging
>  *
>  * The debug level is used to control the amount and type of debugging output
> @@ -220,22 +221,23 @@ ath_printk(const char *level, struct ath_common *common, const char *fmt, ...);
>  * entry.
>  */
>  enum ATH_DEBUG {
> -       ATH_DBG_RESET           = 0x00000001,
> -       ATH_DBG_QUEUE           = 0x00000002,
> -       ATH_DBG_EEPROM          = 0x00000004,
> -       ATH_DBG_CALIBRATE       = 0x00000008,
> -       ATH_DBG_INTERRUPT       = 0x00000010,
> -       ATH_DBG_REGULATORY      = 0x00000020,
> -       ATH_DBG_ANI             = 0x00000040,
> -       ATH_DBG_XMIT            = 0x00000080,
> -       ATH_DBG_BEACON          = 0x00000100,
> -       ATH_DBG_CONFIG          = 0x00000200,
> -       ATH_DBG_FATAL           = 0x00000400,
> -       ATH_DBG_PS              = 0x00000800,
> -       ATH_DBG_HWTIMER         = 0x00001000,
> -       ATH_DBG_BTCOEX          = 0x00002000,
> -       ATH_DBG_WMI             = 0x00004000,
> -       ATH_DBG_BSTUCK          = 0x00008000,
> +       ATH_DBG_RESET           = BIT(0),
> +       ATH_DBG_QUEUE           = BIT(1),
> +       ATH_DBG_EEPROM          = BIT(2),
> +       ATH_DBG_CALIBRATE       = BIT(3),
> +       ATH_DBG_INTERRUPT       = BIT(4),
> +       ATH_DBG_REGULATORY      = BIT(5),
> +       ATH_DBG_ANI             = BIT(6),
> +       ATH_DBG_XMIT            = BIT(7),
> +       ATH_DBG_BEACON          = BIT(8),
> +       ATH_DBG_CONFIG          = BIT(9),
> +       ATH_DBG_FATAL           = BIT(10),
> +       ATH_DBG_PS              = BIT(11),
> +       ATH_DBG_HWTIMER         = BIT(12),
> +       ATH_DBG_BTCOEX          = BIT(13),
> +       ATH_DBG_WMI             = BIT(14),
> +       ATH_DBG_BSTUCK          = BIT(15),
> +       ATH_DBG_DFS             = BIT(16),
>        ATH_DBG_ANY             = 0xffffffff

Split this into two patches, one to convert stuff to BIT(foo) and the
other one to add ATH_DBG_DFS

  Luis
��.n��������+%������w��{.n�����{���zW����ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux