(re-added linux-wireless) On Fri, Sep 30, 2011 at 01:46:06PM +0800, Adrian Chadd wrote: > > if (sc->sc_flags & SC_OP_INVALID) { > printk(KERN_ERR "AR_INTR_SYNC_CAUSE: 0x%08x, AR_INTR_ASYNC_CAUSE: 0x%08x\n", > REG_READ(ah, AR_INTR_SYNC_CAUSE), REG_READ(ah, AR_INTR_ASYNC_CAUSE)); > printk(KERN_ERR "AR_IMR: 0x%08x, AR_ISR: 0x%08x\n", > REG_READ(ah, AR_IMR), > REG_READ(ah, AR_ISR)); > return IRQ_NONE; > } I only output the first 99 and then every 2^n'th interrupt. The log gets truncated otherwise. If I load the module first, then suspend/resume, I get this until "nobody cared". for 1, 2, ..., 99, 128, 256: AR_INTR_SYNC_CAUSE: 0x00000000, AR_INTR_ASYNC_CAUSE: 0x00000000 AR_IMR: 0xdeadbeef, AR_ISR: 0xdeadbeef for 512: AR_INTR_SYNC_CAUSE: 0x00000000, AR_INTR_ASYNC_CAUSE: 0x00000000 AR_IMR: 0x00000000, AR_ISR: 0x00000208 for 1024: AR_INTR_SYNC_CAUSE: 0x00000000, AR_INTR_ASYNC_CAUSE: 0x00000000 AR_IMR: 0x81800964, AR_ISR: 0x00000008 for 2048: AR_INTR_SYNC_CAUSE: 0x00000000, AR_INTR_ASYNC_CAUSE: 0x00000000 AR_IMR: 0xdeadbeef, AR_ISR: 0xdeadbeef for 2^12, 2^13, ..., 2^16 AR_INTR_SYNC_CAUSE: 0x00020000, AR_INTR_ASYNC_CAUSE: 0x00000000 AR_IMR: 0xdeadbeef, AR_ISR: 0xdeadbeef The last ones indeed correspond to AR_INTR_SYNC_MAC_SLEEP_ACCESS that you mentioned. Note that this output is interleaved with device initialization. So I don't know if that causes the register contents to become valid, or if it changes the contents. If I suspend/resume first, then load the module, then wait for 500 ms after request_irq I get only zeroes, repeated 109 times: for 1, 2, ..., 99, 2^7, 2^8, ..., 2^16: AR_IMR: 0x00000000, AR_ISR: 0x00000000 AR_INTR_SYNC_CAUSE: 0x00000000, AR_INTR_ASYNC_CAUSE: 0x00000000 Clemens --- diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index edaa784..634256b 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -16,6 +16,7 @@ #include <linux/nl80211.h> #include <linux/delay.h> +#include <linux/log2.h> #include "ath9k.h" #include "btcoex.h" @@ -765,8 +766,19 @@ irqreturn_t ath_isr(int irq, void *dev) * touch anything. Note this can happen early * on if the IRQ is shared. */ - if (sc->sc_flags & SC_OP_INVALID) + if (sc->sc_flags & SC_OP_INVALID) { + static int count = 0; + if (count < INT_MAX) + count++; + if (count < 100 || is_power_of_2(count)) { + printk(KERN_ERR "AR_INTR_SYNC_CAUSE: 0x%08x, AR_INTR_ASYNC_CAUSE: 0x%08x\n", + REG_READ(ah, AR_INTR_SYNC_CAUSE), REG_READ(ah, AR_INTR_ASYNC_CAUSE)); + printk(KERN_ERR "AR_IMR: 0x%08x, AR_ISR: 0x%08x\n", + REG_READ(ah, AR_IMR), + REG_READ(ah, AR_ISR)); + } return IRQ_NONE; + } /* shared irq, not for us */ diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index d67d6ee..76006a9 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -246,20 +246,24 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* Will be cleared in ath9k_start() */ sc->sc_flags |= SC_OP_INVALID; + ret = ath9k_init_device(id->device, sc, &ath_pci_bus_ops); + if (ret) { + dev_err(&pdev->dev, "Failed to initialize device\n"); + goto err_init; + } + + printk(KERN_INFO "ath9k: requesting irq\n"); ret = request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath9k", sc); if (ret) { dev_err(&pdev->dev, "request_irq failed\n"); goto err_irq; } + printk(KERN_INFO "wait 500 ms\n"); + msleep(500); + printk(KERN_INFO "done waiting\n"); sc->irq = pdev->irq; - ret = ath9k_init_device(id->device, sc, &ath_pci_bus_ops); - if (ret) { - dev_err(&pdev->dev, "Failed to initialize device\n"); - goto err_init; - } - ath9k_hw_name(sc->sc_ah, hw_name, sizeof(hw_name)); wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n", hw_name, (unsigned long)mem, pdev->irq); -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html