Hey! I am having a severe problem with the devices mentioned in the subject. I can establish a connection to the access point just fine, but data traffic is veeerrryyy (unusable!) slow. However, according to ping, no packet loss seems to occur. Also there is no big latency between the packets. It just takes ages for the next one to be sent. Obviously, the same applies to browsing etc. I am pretty sure it is a driver problem. Here's why I think so: - With my Android handset I can not reproduce this problem - On Windows, this problem does not occur, either (one (relevant?) thing: the AP reports an active STBC mode with the Windows driver, on Linux it doesn't) I have tried several things: - Pretty much any IEEE 802.11 mode / Disabling the N-mode - Disabling the encryption - Establishing a connection on the 5Ghz band I was previously using Linux 3.0.4. I'm now using 3.1.0-rc7-next-20110926 (linux-next mirror from sfrothwell, https://github.com/sfrothwell/linux-next). I have contacted AVM about this, and they have experienced issues with Intel Centrino chips before, but they believe it's a driver issue. Other accesspoints always seemed to have worked fine. I have attached a dmesg. The card is in a Lenovo Thinkpad x220i.
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 3.1.0-rc7-next-20110926 (root@dharma) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP Mon Sep 26 15:25:45 CEST 2011 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz2 root=/dev/sda1 rootfstype=ext4 ro add_efi_memmap i915.i915_enable_rc6=1 iwlagn.led_mode=2 [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved) [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable) [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved) [ 0.000000] BIOS-e820: 0000000040200000 - 00000000da99f000 (usable) [ 0.000000] BIOS-e820: 00000000da99f000 - 00000000dae9f000 (reserved) [ 0.000000] BIOS-e820: 00000000dae9f000 - 00000000daf9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000daf9f000 - 00000000dafff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000dafff000 - 00000000db000000 (usable) [ 0.000000] BIOS-e820: 00000000db000000 - 00000000dfa00000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd20000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000011e600000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: LENOVO 4290W1A/4290W1A, BIOS 8DET51WW (1.21 ) 08/02/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x11e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FE0000000 write-back [ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask FE0000000 write-back [ 0.000000] 7 base 11F000000 mask FFF000000 uncachable [ 0.000000] 8 base 11E800000 mask FFF800000 uncachable [ 0.000000] 9 base 11E600000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000db000000 [ 0.000000] 0000000000 - 00db000000 page 2M [ 0.000000] kernel direct mapping tables up to db000000 @ da99c000-da99f000 [ 0.000000] init_memory_mapping: 0000000100000000-000000011e600000 [ 0.000000] 0100000000 - 011e600000 page 2M [ 0.000000] kernel direct mapping tables up to 11e600000 @ 11e5ff000-11e600000 [ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000daffe120 000A4 (v01 LENOVO TP-8D 00001210 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafe7000 000F4 (v04 LENOVO TP-8D 00001210 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000dafea000 0F643 (v01 LENOVO TP-8D 00001210 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf2d000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-8D 00001210 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000daffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000daffa000 007A7 (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.000000] ACPI: HPET 00000000dafe6000 00038 (v01 LENOVO TP-8D 00001210 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafe5000 00098 (v01 LENOVO TP-8D 00001210 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafe4000 0003C (v01 LENOVO TP-8D 00001210 PTL 00000002) [ 0.000000] ACPI: ECDT 00000000dafe3000 00052 (v01 LENOVO TP-8D 00001210 PTL 00000002) [ 0.000000] ACPI: ASF! 00000000dafe9000 000A5 (v32 LENOVO TP-8D 00001210 PTL 00000002) [ 0.000000] ACPI: TCPA 00000000dafe2000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: SSDT 00000000dafe1000 00B2F (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafe0000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000dafdf000 0003E (v01 LENOVO TP-8D 00001210 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafdd000 00292 (v01 LENOVO TP-8D 00001210 PTL 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000011e600000 [ 0.000000] Initmem setup node 0 0000000000000000-000000011e600000 [ 0.000000] NODE_DATA [000000011e5fa000 - 000000011e5fefff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff880119c00000-ffff88011dbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0011e600 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] 0: 0x00020200 -> 0x00040000 [ 0.000000] 0: 0x00040200 -> 0x000da99f [ 0.000000] 0: 0x000dafff -> 0x000db000 [ 0.000000] 0: 0x00100000 -> 0x0011e600 [ 0.000000] On node 0 totalpages: 1018669 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3912 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 873952 pages, LIFO batch:31 [ 0.000000] Normal zone: 1944 pages used for memmap [ 0.000000] Normal zone: 122472 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 00000000da99f000 - 00000000dae9f000 [ 0.000000] PM: Registered nosave memory: 00000000dae9f000 - 00000000daf9f000 [ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000 [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000 [ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd20000 [ 0.000000] PM: Registered nosave memory: 00000000ffd20000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000) [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88011e200000 s74496 r8192 d23808 u262144 [ 0.000000] pcpu-alloc: s74496 r8192 d23808 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1000336 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz2 root=/dev/sda1 rootfstype=ext4 ro add_efi_memmap i915.i915_enable_rc6=1 iwlagn.led_mode=2 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3927532k/4691968k available (7538k kernel code, 617292k absent, 147144k reserved, 5391k data, 648k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 2093.166 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4186.33 BogoMIPS (lpj=2093166) [ 0.000154] pid_max: default: 32768 minimum: 301 [ 0.000245] Security Framework initialized [ 0.000320] SELinux: Initializing. [ 0.000398] SELinux: Starting in permissive mode [ 0.000760] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001952] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002471] Mount-cache hash table entries: 256 [ 0.002662] Initializing cgroup subsys freezer [ 0.002759] Disabled fast string operations [ 0.002846] CPU: Physical Processor ID: 0 [ 0.002919] CPU: Processor Core ID: 0 [ 0.002994] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002995] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003149] mce: CPU supports 7 MCE banks [ 0.003233] CPU0: Thermal monitoring enabled (TM1) [ 0.003311] using mwait in idle threads. [ 0.003436] ACPI: Core revision 20110623 [ 0.011053] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.021129] CPU0: Intel(R) Core(TM) i3-2310M CPU @ 2.10GHz stepping 07 [ 0.122761] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.122990] ... version: 3 [ 0.123064] ... bit width: 48 [ 0.123138] ... generic registers: 4 [ 0.123211] ... value mask: 0000ffffffffffff [ 0.123287] ... max period: 000000007fffffff [ 0.123363] ... fixed-purpose events: 3 [ 0.123436] ... event mask: 000000070000000f [ 0.123678] Booting Node 0, Processors #1 [ 0.123770] smpboot cpu 1: start_ip = 98000 [ 0.194733] Disabled fast string operations [ 0.214872] #2 [ 0.214991] smpboot cpu 2: start_ip = 98000 [ 0.285683] Disabled fast string operations [ 0.305819] #3 [ 0.305936] smpboot cpu 3: start_ip = 98000 [ 0.376634] Disabled fast string operations [ 0.396703] Brought up 4 CPUs [ 0.396851] Total of 4 processors activated (16744.09 BogoMIPS). [ 0.399028] kworker/u:0 used greatest stack depth: 5592 bytes left [ 0.399195] PM: Registering ACPI NVS region at dae9f000 (1048576 bytes) [ 0.399365] RTC time: 6:28:09, date: 09/26/11 [ 0.399964] NET: Registered protocol family 16 [ 0.400324] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.400431] ACPI: bus type pci registered [ 0.400777] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.400888] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.414082] PCI: Using configuration type 1 for base access [ 0.421729] bio: create slab <bio-0> at 0 [ 0.421919] ACPI: Added _OSI(Module Device) [ 0.421994] ACPI: Added _OSI(Processor Device) [ 0.422069] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.422144] ACPI: Added _OSI(Processor Aggregator Device) [ 0.423800] ACPI: EC: EC description table is found, configuring boot EC [ 0.428376] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.442227] ACPI: SSDT 00000000dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.442819] ACPI: Dynamic OEM Table Load: [ 0.442974] ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.446899] ACPI: SSDT 00000000dae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.447511] ACPI: Dynamic OEM Table Load: [ 0.447668] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.451770] ACPI: SSDT 00000000dae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.452351] ACPI: Dynamic OEM Table Load: [ 0.452504] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.457203] ACPI: Interpreter enabled [ 0.457279] ACPI: (supports S0 S3 S4 S5) [ 0.457528] ACPI: Using IOAPIC for interrupt routing [ 0.464093] ACPI: Power Resource [PUBS] (on) [ 0.467892] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.469151] ACPI: ACPI Dock Station Driver: 3 docks/bays found [ 0.469231] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.469445] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.469594] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.469673] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.469753] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.469860] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfebfffff] [ 0.469966] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff] [ 0.470082] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 0.470118] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300 [ 0.470129] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.470135] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.470140] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f] [ 0.470192] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 0.470217] pci 0000:00:16.0: reg 10: [mem 0xf2525000-0xf252500f 64bit] [ 0.470281] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.470285] pci 0000:00:16.0: PME# disabled [ 0.470319] pci 0000:00:19.0: [8086:1502] type 0 class 0x000200 [ 0.470338] pci 0000:00:19.0: reg 10: [mem 0xf2500000-0xf251ffff] [ 0.470347] pci 0000:00:19.0: reg 14: [mem 0xf252b000-0xf252bfff] [ 0.470356] pci 0000:00:19.0: reg 18: [io 0x5080-0x509f] [ 0.470408] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.470412] pci 0000:00:19.0: PME# disabled [ 0.470437] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 0.470459] pci 0000:00:1a.0: reg 10: [mem 0xf252a000-0xf252a3ff] [ 0.470534] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.470539] pci 0000:00:1a.0: PME# disabled [ 0.470564] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 0.470584] pci 0000:00:1b.0: reg 10: [mem 0xf2520000-0xf2523fff 64bit] [ 0.470641] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.470645] pci 0000:00:1b.0: PME# disabled [ 0.470672] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 0.470774] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.470779] pci 0000:00:1c.0: PME# disabled [ 0.470814] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 0.470915] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.470920] pci 0000:00:1c.1: PME# disabled [ 0.470955] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 0.471057] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.471062] pci 0000:00:1c.3: PME# disabled [ 0.471097] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604 [ 0.471199] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.471204] pci 0000:00:1c.4: PME# disabled [ 0.471246] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 0.471268] pci 0000:00:1d.0: reg 10: [mem 0xf2529000-0xf25293ff] [ 0.471344] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.471348] pci 0000:00:1d.0: PME# disabled [ 0.471375] pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601 [ 0.471494] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 [ 0.471513] pci 0000:00:1f.2: reg 10: [io 0x50a8-0x50af] [ 0.471522] pci 0000:00:1f.2: reg 14: [io 0x50bc-0x50bf] [ 0.471530] pci 0000:00:1f.2: reg 18: [io 0x50a0-0x50a7] [ 0.471539] pci 0000:00:1f.2: reg 1c: [io 0x50b8-0x50bb] [ 0.471547] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f] [ 0.471556] pci 0000:00:1f.2: reg 24: [mem 0xf2528000-0xf25287ff] [ 0.471593] pci 0000:00:1f.2: PME# supported from D3hot [ 0.471597] pci 0000:00:1f.2: PME# disabled [ 0.471614] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 0.471631] pci 0000:00:1f.3: reg 10: [mem 0xf2524000-0xf25240ff 64bit] [ 0.471654] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.471755] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.472075] pci 0000:03:00.0: [8086:0085] type 0 class 0x000280 [ 0.472224] pci 0000:03:00.0: reg 10: [mem 0xf2400000-0xf2401fff 64bit] [ 0.472798] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.472834] pci 0000:03:00.0: PME# disabled [ 0.473022] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.473103] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff] [ 0.473155] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.473234] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.473238] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff] [ 0.473245] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.473395] pci 0000:0d:00.0: [1180:e823] type 0 class 0x000880 [ 0.473424] pci 0000:0d:00.0: reg 10: [mem 0xf1400000-0xf14000ff] [ 0.473590] pci 0000:0d:00.0: supports D1 D2 [ 0.473592] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.473598] pci 0000:0d:00.0: PME# disabled [ 0.473645] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] [ 0.473724] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.473729] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff] [ 0.473736] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.473772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.473848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.473870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.473891] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.473914] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] [ 0.474031] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.474249] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d [ 0.474357] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.476650] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.477177] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11) [ 0.477704] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 0.478226] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 0.478751] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11) [ 0.479264] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.479894] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11) [ 0.480413] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11) [ 0.481018] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.481131] vgaarb: loaded [ 0.481202] vgaarb: bridge control possible 0000:00:02.0 [ 0.481386] SCSI subsystem initialized [ 0.481540] libata version 3.00 loaded. [ 0.481627] usbcore: registered new interface driver usbfs [ 0.481741] usbcore: registered new interface driver hub [ 0.481850] usbcore: registered new device driver usb [ 0.482170] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.482249] PCI: Using ACPI for IRQ routing [ 0.483943] PCI: pci_cache_line_size set to 64 bytes [ 0.484019] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.484022] reserve RAM buffer: 00000000da99f000 - 00000000dbffffff [ 0.484024] reserve RAM buffer: 00000000db000000 - 00000000dbffffff [ 0.484026] reserve RAM buffer: 000000011e600000 - 000000011fffffff [ 0.484259] cfg80211: Calling CRDA to update world regulatory domain [ 0.484469] NetLabel: Initializing [ 0.484543] NetLabel: domain hash size = 128 [ 0.484617] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.484703] NetLabel: unlabeled traffic allowed by default [ 0.484839] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.485274] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.487364] Switching to clocksource hpet [ 0.489515] pnp: PnP ACPI init [ 0.489595] ACPI: bus type pnp registered [ 0.489990] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.489993] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 0.489994] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 0.489996] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 0.489998] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 0.489999] pnp 00:00: [mem 0x000d0000-0x000d3fff] [ 0.490001] pnp 00:00: [mem 0x000d4000-0x000d7fff] [ 0.490003] pnp 00:00: [mem 0x000d8000-0x000dbfff] [ 0.490004] pnp 00:00: [mem 0x000dc000-0x000dffff] [ 0.490006] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 0.490007] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 0.490009] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 0.490010] pnp 00:00: [mem 0x000ec000-0x000effff] [ 0.490012] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 0.490014] pnp 00:00: [mem 0x00100000-0xdf9fffff] [ 0.490015] pnp 00:00: [mem 0xfec00000-0xfed3ffff] [ 0.490017] pnp 00:00: [mem 0xfed4c000-0xffffffff] [ 0.490094] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.490174] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.490252] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.490333] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.490411] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved [ 0.490501] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.490582] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.490661] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.490740] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.490819] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.490899] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.490979] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.491059] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.491138] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.491218] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved [ 0.491298] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.491378] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.491459] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.491479] pnp 00:01: [bus 00-fe] [ 0.491481] pnp 00:01: [io 0x0cf8-0x0cff] [ 0.491483] pnp 00:01: [io 0x0000-0x0cf7 window] [ 0.491490] pnp 00:01: [io 0x0d00-0xffff window] [ 0.491492] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 0.491494] pnp 00:01: [mem 0x000c0000-0x000c3fff window] [ 0.491496] pnp 00:01: [mem 0x000c4000-0x000c7fff window] [ 0.491497] pnp 00:01: [mem 0x000c8000-0x000cbfff window] [ 0.491499] pnp 00:01: [mem 0x000cc000-0x000cffff window] [ 0.491501] pnp 00:01: [mem 0x000d0000-0x000d3fff window] [ 0.491503] pnp 00:01: [mem 0x000d4000-0x000d7fff window] [ 0.491505] pnp 00:01: [mem 0x000d8000-0x000dbfff window] [ 0.491506] pnp 00:01: [mem 0x000dc000-0x000dffff window] [ 0.491508] pnp 00:01: [mem 0x000e0000-0x000e3fff window] [ 0.491512] pnp 00:01: [mem 0x000e4000-0x000e7fff window] [ 0.491514] pnp 00:01: [mem 0x000e8000-0x000ebfff window] [ 0.491516] pnp 00:01: [mem 0x000ec000-0x000effff window] [ 0.491517] pnp 00:01: [mem 0xdfa00000-0xfebfffff window] [ 0.491519] pnp 00:01: [mem 0xfed40000-0xfed4bfff window] [ 0.491599] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.491654] pnp 00:02: [io 0x0010-0x001f] [ 0.491656] pnp 00:02: [io 0x0090-0x009f] [ 0.491657] pnp 00:02: [io 0x0024-0x0025] [ 0.491659] pnp 00:02: [io 0x0028-0x0029] [ 0.491660] pnp 00:02: [io 0x002c-0x002d] [ 0.491662] pnp 00:02: [io 0x0030-0x0031] [ 0.491663] pnp 00:02: [io 0x0034-0x0035] [ 0.491665] pnp 00:02: [io 0x0038-0x0039] [ 0.491666] pnp 00:02: [io 0x003c-0x003d] [ 0.491668] pnp 00:02: [io 0x00a4-0x00a5] [ 0.491669] pnp 00:02: [io 0x00a8-0x00a9] [ 0.491670] pnp 00:02: [io 0x00ac-0x00ad] [ 0.491672] pnp 00:02: [io 0x00b0-0x00b5] [ 0.491673] pnp 00:02: [io 0x00b8-0x00b9] [ 0.491675] pnp 00:02: [io 0x00bc-0x00bd] [ 0.491676] pnp 00:02: [io 0x0050-0x0053] [ 0.491678] pnp 00:02: [io 0x0072-0x0077] [ 0.491679] pnp 00:02: [io 0x0400-0x047f] [ 0.491681] pnp 00:02: [io 0x0500-0x057f] [ 0.491682] pnp 00:02: [io 0x0800-0x080f] [ 0.491684] pnp 00:02: [io 0x15e0-0x15ef] [ 0.491685] pnp 00:02: [io 0x1600-0x167f] [ 0.491687] pnp 00:02: [mem 0xf8000000-0xfbffffff] [ 0.491688] pnp 00:02: [mem 0x00000000-0x00000fff] [ 0.491690] pnp 00:02: [mem 0xfed1c000-0xfed1ffff] [ 0.491692] pnp 00:02: [mem 0xfed10000-0xfed13fff] [ 0.491693] pnp 00:02: [mem 0xfed18000-0xfed18fff] [ 0.491695] pnp 00:02: [mem 0xfed19000-0xfed19fff] [ 0.491697] pnp 00:02: [mem 0xfed45000-0xfed4bfff] [ 0.491772] system 00:02: [io 0x0400-0x047f] has been reserved [ 0.491849] system 00:02: [io 0x0500-0x057f] has been reserved [ 0.491927] system 00:02: [io 0x0800-0x080f] has been reserved [ 0.492005] system 00:02: [io 0x15e0-0x15ef] has been reserved [ 0.492083] system 00:02: [io 0x1600-0x167f] has been reserved [ 0.492161] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.492240] system 00:02: [mem 0x00000000-0x00000fff] could not be reserved [ 0.492319] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.492398] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.492478] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.492567] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.492648] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.492727] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.492770] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.492827] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.492836] pnp 00:04: [io 0x0000-0x000f] [ 0.492838] pnp 00:04: [io 0x0080-0x008f] [ 0.492839] pnp 00:04: [io 0x00c0-0x00df] [ 0.492841] pnp 00:04: [dma 4] [ 0.492890] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.492898] pnp 00:05: [io 0x0061] [ 0.492946] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.492954] pnp 00:06: [io 0x00f0] [ 0.492963] pnp 00:06: [irq 13] [ 0.493017] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.493024] pnp 00:07: [io 0x0070-0x0071] [ 0.493030] pnp 00:07: [irq 8] [ 0.493078] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.493086] pnp 00:08: [io 0x0060] [ 0.493087] pnp 00:08: [io 0x0064] [ 0.493092] pnp 00:08: [irq 1] [ 0.493141] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.493152] pnp 00:09: [irq 12] [ 0.493205] pnp 00:09: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active) [ 0.493235] pnp 00:0a: [mem 0xfed40000-0xfed44fff] [ 0.493290] pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.493744] pnp: PnP ACPI: found 11 devices [ 0.493819] ACPI: ACPI bus type pnp unregistered [ 0.501787] PCI: max bus depth: 1 pci_try_num: 2 [ 0.501827] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.501914] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.501994] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff] [ 0.502079] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.502157] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.502238] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff] [ 0.502319] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.502430] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] [ 0.502516] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.502598] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff] [ 0.502679] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.502804] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.502888] pci 0000:00:1c.0: setting latency timer to 64 [ 0.502899] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.502980] pci 0000:00:1c.1: setting latency timer to 64 [ 0.502990] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.503071] pci 0000:00:1c.3: setting latency timer to 64 [ 0.503078] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.503159] pci 0000:00:1c.4: setting latency timer to 64 [ 0.503163] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.503165] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.503167] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.503169] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff] [ 0.503171] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff] [ 0.503173] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff] [ 0.503175] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 0.503177] pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf23fffff] [ 0.503179] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref] [ 0.503181] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] [ 0.503183] pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff] [ 0.503185] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref] [ 0.503214] NET: Registered protocol family 2 [ 0.503425] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.504956] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.506869] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.507165] TCP: Hash tables configured (established 524288 bind 65536) [ 0.507244] TCP reno registered [ 0.507325] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.507423] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.507604] NET: Registered protocol family 1 [ 0.507759] RPC: Registered named UNIX socket transport module. [ 0.507837] RPC: Registered udp transport module. [ 0.507912] RPC: Registered tcp transport module. [ 0.507986] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.508073] pci 0000:00:02.0: Boot video device [ 0.508158] PCI: CLS 64 bytes, default 64 [ 0.508206] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.508285] Placing 64MB software IO TLB between ffff8800d699c000 - ffff8800da99c000 [ 0.508392] software IO TLB at phys 0xd699c000 - 0xda99c000 [ 0.509952] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1a [ 0.510036] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1a [ 0.510123] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x1a [ 0.510208] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x1a [ 0.510325] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 0.510684] audit: initializing netlink socket (disabled) [ 0.510770] type=2000 audit(1317018489.350:1): initialized [ 0.540692] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.543912] VFS: Disk quotas dquot_6.5.2 [ 0.544058] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.545035] NTFS driver 2.1.30 [Flags: R/O]. [ 0.545258] msgmni has been set to 7670 [ 0.545417] SELinux: Registering netfilter hooks [ 0.545801] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.545907] io scheduler noop registered [ 0.545981] io scheduler deadline registered [ 0.546109] io scheduler cfq registered (default) [ 0.546539] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.546891] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.547184] ACPI: AC Adapter [AC] (on-line) [ 0.547445] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.547773] ACPI: Lid Switch [LID] [ 0.547908] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.548017] ACPI: Sleep Button [SLPB] [ 0.548157] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.548776] ACPI: Power Button [PWRF] [ 0.548934] ACPI: acpi_idle registered with cpuidle [ 0.553618] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.553697] ACPI: Thermal Zone [THM0] (59 C) [ 0.553943] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.567981] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.568097] ACPI: Battery Slot [BAT0] (battery present) [ 0.623885] Non-volatile memory driver v1.3 [ 0.623959] Linux agpgart interface v0.103 [ 0.624153] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 0.624357] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.625710] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.625915] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.626085] [drm] Initialized drm 1.1.0 20060810 [ 0.626185] i915 0000:00:02.0: power state changed by ACPI to D0 [ 0.626265] i915 0000:00:02.0: power state changed by ACPI to D0 [ 0.626347] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.626428] i915 0000:00:02.0: setting latency timer to 64 [ 0.687207] mtrr: no more MTRRs available [ 0.687281] [drm] MTRR allocation failed. Graphics performance may suffer. [ 0.687955] i915 0000:00:02.0: irq 40 for MSI/MSI-X [ 0.687959] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.688037] [drm] Driver supports precise vblank timestamp query. [ 0.688138] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.320987] fbcon: inteldrmfb (fb0) is primary device [ 1.321972] [drm:ironlake_update_pch_refclk] *ERROR* enabling SSC on PCH [ 1.487843] Console: switching to colour frame buffer device 170x48 [ 1.490490] fb0: inteldrmfb frame buffer device [ 1.490511] drm: registered panic notifier [ 1.500607] acpi device:01: registered as cooling_device4 [ 1.500764] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3 [ 1.500808] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 1.500898] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.502677] brd: module loaded [ 1.503585] loop: module loaded [ 1.503840] ahci 0000:00:1f.2: version 3.0 [ 1.503851] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.503927] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 1.503958] ahci: SSS flag set, parallel bus scan disabled [ 1.511084] Refined TSC clocksource calibration: 2093.200 MHz. [ 1.511158] Switching to clocksource tsc [ 1.514099] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode [ 1.514196] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 1.514253] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.518792] scsi0 : ahci [ 1.518901] scsi1 : ahci [ 1.518998] scsi2 : ahci [ 1.520008] scsi3 : ahci [ 1.521001] scsi4 : ahci [ 1.521982] scsi5 : ahci [ 1.523285] ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 41 [ 1.524200] ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 41 [ 1.525091] ata3: DUMMY [ 1.525958] ata4: DUMMY [ 1.526819] ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 41 [ 1.527707] ata6: DUMMY [ 1.528794] tun: Universal TUN/TAP device driver, 1.6 [ 1.529695] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 1.530609] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 1.531528] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.532448] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.533356] e1000e 0000:00:19.0: setting latency timer to 64 [ 1.533470] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 1.722009] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:5a:e0:f6 [ 1.722911] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.723856] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 1.724814] usbcore: registered new interface driver rndis_wlan [ 1.725729] usbcore: registered new interface driver cdc_ether [ 1.726619] usbcore: registered new interface driver rndis_host [ 1.727598] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.728464] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 1.728478] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1.729353] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 1.730238] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.731115] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.731118] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.731986] drivers/usb/core/inode.c: creating file 'devices' [ 1.731989] drivers/usb/core/inode.c: creating file '001' [ 1.732030] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.732896] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3 [ 1.732900] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 1.732914] ehci_hcd 0000:00:1a.0: support lpm [ 1.732925] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.733784] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.737681] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.737683] ehci_hcd 0000:00:1a.0: supports USB remote wakeup [ 1.737699] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf252a000 [ 1.738552] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.742434] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 1.747982] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.748929] usb usb1: default language 0x0409 [ 1.748934] usb usb1: udev 1, busnum 1, minor = 0 [ 1.748936] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.749768] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.750589] usb usb1: Product: EHCI Host Controller [ 1.751393] usb usb1: Manufacturer: Linux 3.1.0-rc7-next-20110926 ehci_hcd [ 1.752222] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.753100] usb usb1: usb_probe_device [ 1.753102] usb usb1: configuration #1 chosen from 1 choice [ 1.753108] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.753145] hub 1-0:1.0: usb_probe_interface [ 1.753147] hub 1-0:1.0: usb_probe_interface - got id [ 1.753149] hub 1-0:1.0: USB hub found [ 1.753953] hub 1-0:1.0: 3 ports detected [ 1.754753] hub 1-0:1.0: standalone hub [ 1.754754] hub 1-0:1.0: no power switching (usb 1.0) [ 1.754756] hub 1-0:1.0: individual port over-current protection [ 1.754758] hub 1-0:1.0: power on to power good time: 20ms [ 1.754761] hub 1-0:1.0: local power source is good [ 1.754763] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.754784] drivers/usb/core/inode.c: creating file '001' [ 1.754811] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.755621] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 1.756410] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.757195] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.757199] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.757945] drivers/usb/core/inode.c: creating file '002' [ 1.757996] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.758770] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3 [ 1.758774] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 1.758787] ehci_hcd 0000:00:1d.0: support lpm [ 1.758798] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.759577] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.763456] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.763457] ehci_hcd 0000:00:1d.0: supports USB remote wakeup [ 1.763470] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf2529000 [ 1.764262] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.768150] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 1.773969] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.774874] usb usb2: default language 0x0409 [ 1.774879] usb usb2: udev 1, busnum 2, minor = 128 [ 1.774881] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.775707] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.776516] usb usb2: Product: EHCI Host Controller [ 1.777329] usb usb2: Manufacturer: Linux 3.1.0-rc7-next-20110926 ehci_hcd [ 1.778149] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.779031] usb usb2: usb_probe_device [ 1.779033] usb usb2: configuration #1 chosen from 1 choice [ 1.779038] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.779076] hub 2-0:1.0: usb_probe_interface [ 1.779078] hub 2-0:1.0: usb_probe_interface - got id [ 1.779080] hub 2-0:1.0: USB hub found [ 1.779890] hub 2-0:1.0: 3 ports detected [ 1.780681] hub 2-0:1.0: standalone hub [ 1.780682] hub 2-0:1.0: no power switching (usb 1.0) [ 1.780684] hub 2-0:1.0: individual port over-current protection [ 1.780686] hub 2-0:1.0: power on to power good time: 20ms [ 1.780689] hub 2-0:1.0: local power source is good [ 1.780690] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.780709] drivers/usb/core/inode.c: creating file '001' [ 1.780789] usbcore: registered new interface driver usblp [ 1.781585] Initializing USB Mass Storage driver... [ 1.782413] usbcore: registered new interface driver usb-storage [ 1.783210] USB Mass Storage support registered. [ 1.784044] usbcore: registered new interface driver libusual [ 1.784908] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.789496] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.790313] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.791213] mousedev: PS/2 mouse device common for all mice [ 1.792246] rtc_cmos 00:07: RTC can wake from S4 [ 1.793194] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.794053] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.794937] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.795368] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.796841] Linux video capture interface: v2.00 [ 1.797763] usbcore: registered new interface driver uvcvideo [ 1.798630] USB Video Class driver (1.1.1) [ 1.799598] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@xxxxxxxxxx [ 1.802134] cpuidle: using governor ladder [ 1.803587] cpuidle: using governor menu [ 1.804573] sdhci: Secure Digital Host Controller Interface driver [ 1.805474] sdhci: Copyright(c) Pierre Ossman [ 1.806370] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 4) [ 1.807377] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.808306] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [ 1.808425] Registered led device: mmc0:: [ 1.809997] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [ 1.811187] EFI Variables Facility v0.08 2004-May-17 [ 1.813052] usbcore: registered new interface driver usbhid [ 1.813972] usbhid: USB HID core driver [ 1.815039] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 1.815969] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 1.816877] thinkpad_acpi: ThinkPad BIOS 8DET51WW (1.21 ), EC unknown [ 1.817791] thinkpad_acpi: Lenovo ThinkPad X220, model 4290W1A [ 1.819248] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 1.820351] thinkpad_acpi: radio switch found; radios are enabled [ 1.821431] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode [ 1.824601] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 1.826098] Registered led device: tpacpi::thinklight [ 1.826189] Registered led device: tpacpi::power [ 1.826246] Registered led device: tpacpi::standby [ 1.826319] Registered led device: tpacpi::thinkvantage [ 1.826326] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 1.827397] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) [ 1.829430] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5 [ 1.831020] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.832062] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 1.832085] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 1.833964] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.835932] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.835958] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.837036] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.838811] ata1.00: ATA-8: HITACHI HTS543232A7A384, ES2ZB70B, max UDMA/100 [ 1.839907] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.842190] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.842194] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.843656] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.845835] ata1.00: configured for UDMA/100 [ 1.847385] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54323 ES2Z PQ: 0 ANSI: 5 [ 1.848588] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.848663] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.850703] sd 0:0:0:0: [sda] Write Protect is off [ 1.851703] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.851721] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.854957] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.854971] hub 1-0:1.0: port 1: status 0501 change 0001 [ 1.879950] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.879974] hub 2-0:1.0: port 1: status 0501 change 0001 [ 1.903874] sda: sda1 sda2 sda3 sda4 [ 1.905882] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.955056] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000 [ 1.955065] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 2.006101] ehci_hcd 0000:00:1a.0: port 1 high speed [ 2.006106] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.056914] usb 1-1: new high speed USB device number 2 using ehci_hcd [ 2.109183] ehci_hcd 0000:00:1a.0: port 1 high speed [ 2.109189] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.154873] ata2: SATA link down (SStatus 0 SControl 300) [ 2.171984] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1 [ 2.171994] ehci_hcd 0000:00:1a.0: LPM: no device attached [ 2.172354] usb 1-1: udev 2, busnum 1, minor = 1 [ 2.172362] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.173728] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.174859] usb 1-1: usb_probe_device [ 2.174862] usb 1-1: configuration #1 chosen from 1 choice [ 2.174942] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 2.175105] hub 1-1:1.0: usb_probe_interface [ 2.175107] hub 1-1:1.0: usb_probe_interface - got id [ 2.175109] hub 1-1:1.0: USB hub found [ 2.176171] hub 1-1:1.0: 6 ports detected [ 2.177333] hub 1-1:1.0: standalone hub [ 2.177335] hub 1-1:1.0: individual port power switching [ 2.177337] hub 1-1:1.0: individual port over-current protection [ 2.177340] hub 1-1:1.0: Single TT [ 2.177342] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.177344] hub 1-1:1.0: power on to power good time: 100ms [ 2.177540] hub 1-1:1.0: local power source is good [ 2.177545] hub 1-1:1.0: enabling power on all ports [ 2.178323] drivers/usb/core/inode.c: creating file '002' [ 2.178358] hub 2-0:1.0: state 7 ports 3 chg 0002 evt 0000 [ 2.178370] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 2.229007] ehci_hcd 0000:00:1d.0: port 1 high speed [ 2.229013] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.278060] hub 1-1:1.0: port 2: status 0101 change 0001 [ 2.278306] hub 1-1:1.0: port 3: status 0101 change 0001 [ 2.278501] hub 1-1:1.0: port 4: status 0101 change 0001 [ 2.278893] hub 1-1:1.0: port 6: status 0101 change 0001 [ 2.279814] usb 2-1: new high speed USB device number 2 using ehci_hcd [ 2.332089] ehci_hcd 0000:00:1d.0: port 1 high speed [ 2.332094] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.353547] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 2.354749] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0 [ 2.355870] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0 [ 2.357872] ALSA device list: [ 2.358837] #0: HDA Intel PCH at 0xf2520000 irq 43 [ 2.359793] #29: ThinkPad Console Audio Control at EC reg 0x30, fw unknown [ 2.360893] Netfilter messages via NETLINK v0.30. [ 2.361877] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.363183] ctnetlink v0.93: registering with nfnetlink. [ 2.364441] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.365473] TCP cubic registered [ 2.366470] Initializing XFRM netlink socket [ 2.367677] NET: Registered protocol family 10 [ 2.369242] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.370272] IPv6 over IPv4 tunneling driver [ 2.371877] NET: Registered protocol family 17 [ 2.372871] lib80211: common routines for IEEE802.11 drivers [ 2.373853] lib80211_crypt: registered algorithm 'NULL' [ 2.373855] Registering the dns_resolver key type [ 2.375144] PM: Hibernation image not present or could not be loaded. [ 2.375157] registered taskstats version 1 [ 2.376368] Magic number: 11:532:469 [ 2.377369] console [netcon0] enabled [ 2.378290] netconsole: network logging started [ 2.379221] usb 1-1: link qh256-0001/ffff88011837f800 start 1 [1/0 us] [ 2.394848] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1 [ 2.394859] ehci_hcd 0000:00:1d.0: LPM: no device attached [ 2.395131] usb 2-1: udev 2, busnum 2, minor = 129 [ 2.395140] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.396113] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.397159] usb 2-1: usb_probe_device [ 2.397162] usb 2-1: configuration #1 chosen from 1 choice [ 2.397217] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 2.397335] hub 2-1:1.0: usb_probe_interface [ 2.397338] hub 2-1:1.0: usb_probe_interface - got id [ 2.397339] hub 2-1:1.0: USB hub found [ 2.398325] hub 2-1:1.0: 8 ports detected [ 2.399255] hub 2-1:1.0: standalone hub [ 2.399256] hub 2-1:1.0: individual port power switching [ 2.399258] hub 2-1:1.0: individual port over-current protection [ 2.399259] hub 2-1:1.0: Single TT [ 2.399261] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 2.399263] hub 2-1:1.0: power on to power good time: 100ms [ 2.399444] hub 2-1:1.0: local power source is good [ 2.399449] hub 2-1:1.0: enabling power on all ports [ 2.400701] drivers/usb/core/inode.c: creating file '002' [ 2.400719] hub 1-1:1.0: state 7 ports 6 chg 005c evt 0000 [ 2.400833] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 2.411834] hub 1-1:1.0: port 2 not reset yet, waiting 10ms [ 2.462726] ata5: SATA link down (SStatus 0 SControl 300) [ 2.473863] usb 1-1.2: new low speed USB device number 3 using ehci_hcd [ 2.499801] hub 2-1:1.0: port 1: status 0101 change 0001 [ 2.552831] usb 1-1.2: skipped 1 descriptor after interface [ 2.553440] usb 1-1.2: default language 0x0409 [ 2.555954] usb 1-1.2: udev 3, busnum 1, minor = 2 [ 2.555963] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c03e [ 2.556929] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.557818] usb 1-1.2: Product: USB-PS/2 Optical Mouse [ 2.558698] usb 1-1.2: Manufacturer: Logitech [ 2.559689] usb 1-1.2: usb_probe_device [ 2.559692] usb 1-1.2: configuration #1 chosen from 1 choice [ 2.560028] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 2.560164] usbhid 1-1.2:1.0: usb_probe_interface [ 2.560166] usbhid 1-1.2:1.0: usb_probe_interface - got id [ 2.563299] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input6 [ 2.564413] generic-usb 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 2.565366] drivers/usb/core/inode.c: creating file '003' [ 2.565512] hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s [ 2.600646] usb 2-1: link qh256-0001/ffff88011837f480 start 1 [1/0 us] [ 2.627806] usb 1-1.3: new full speed USB device number 4 using ehci_hcd [ 2.639785] hub 1-1:1.0: port 3 not reset yet, waiting 10ms [ 2.713596] usb 1-1.3: ep0 maxpacket = 8 [ 2.714582] usb 1-1.3: default language 0x0409 [ 2.715138] usb 1-1.3: udev 4, busnum 1, minor = 3 [ 2.715147] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 [ 2.716151] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.717091] usb 1-1.3: Product: Biometric Coprocessor [ 2.718012] usb 1-1.3: Manufacturer: UPEK [ 2.719042] usb 1-1.3: usb_probe_device [ 2.719044] usb 1-1.3: configuration #1 chosen from 1 choice [ 2.719213] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) [ 2.719360] drivers/usb/core/inode.c: creating file '004' [ 2.719444] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 2.726323] Synaptics Touchpad, model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00 [ 2.727349] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.781327] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 2.782405] usb 1-1.4: new full speed USB device number 5 using ehci_hcd [ 2.793166] md: Waiting for all devices to be available before autodetect [ 2.794300] md: If you don't use raid, use raid=noautodetect [ 2.861714] usb 1-1.4: skipped 1 descriptor after interface [ 2.862072] usb 1-1.4: default language 0x0409 [ 2.863274] usb 1-1.4: udev 5, busnum 1, minor = 4 [ 2.863282] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=217f [ 2.864351] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.865350] usb 1-1.4: Product: Broadcom Bluetooth Device [ 2.866333] usb 1-1.4: Manufacturer: Broadcom Corp [ 2.867310] usb 1-1.4: SerialNumber: EC55F9F6A7CE [ 2.868382] usb 1-1.4: usb_probe_device [ 2.868385] usb 1-1.4: configuration #1 chosen from 1 choice [ 2.868547] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) [ 2.868720] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1) [ 2.868779] usb 1-1.4: adding 1-1.4:1.2 (config #1, interface 2) [ 2.868836] usb 1-1.4: adding 1-1.4:1.3 (config #1, interface 3) [ 2.868879] drivers/usb/core/inode.c: creating file '005' [ 2.869178] hub 1-1:1.0: port 6, status 0101, change 0000, 12 Mb/s [ 2.879684] hub 1-1:1.0: port 6 not reset yet, waiting 10ms [ 2.941662] usb 1-1.6: new high speed USB device number 6 using ehci_hcd [ 2.953647] hub 1-1:1.0: port 6 not reset yet, waiting 10ms [ 3.032635] usb 1-1.6: skipped 1 descriptor after configuration [ 3.032644] usb 1-1.6: skipped 5 descriptors after interface [ 3.032651] usb 1-1.6: skipped 1 descriptor after endpoint [ 3.032656] usb 1-1.6: skipped 20 descriptors after interface [ 3.032863] usb 1-1.6: default language 0x0409 [ 3.034007] usb 1-1.6: udev 6, busnum 1, minor = 5 [ 3.034015] usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b217 [ 3.035060] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.036040] usb 1-1.6: Product: Integrated Camera [ 3.037016] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. [ 3.038112] usb 1-1.6: usb_probe_device [ 3.038114] usb 1-1.6: configuration #1 chosen from 1 choice [ 3.038192] usb 1-1.6: adding 1-1.6:1.0 (config #1, interface 0) [ 3.038958] uvcvideo 1-1.6:1.0: usb_probe_interface [ 3.038961] uvcvideo 1-1.6:1.0: usb_probe_interface - got id [ 3.038974] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217) [ 3.041730] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8 [ 3.042880] usb 1-1.6: adding 1-1.6:1.1 (config #1, interface 1) [ 3.042929] drivers/usb/core/inode.c: creating file '006' [ 3.042944] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0010 [ 3.043059] hub 2-1:1.0: state 7 ports 8 chg 0002 evt 0000 [ 3.043252] hub 2-1:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 3.053570] hub 2-1:1.0: port 1 not reset yet, waiting 10ms [ 3.115557] usb 2-1.1: new high speed USB device number 3 using ehci_hcd [ 3.128572] hub 2-1:1.0: port 1 not reset yet, waiting 10ms [ 3.209593] usb 2-1.1: default language 0x0409 [ 3.215580] usb 2-1.1: udev 3, busnum 2, minor = 130 [ 3.215589] usb 2-1.1: New USB device found, idVendor=0bb4, idProduct=0ca2 [ 3.216680] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.217714] usb 2-1.1: Product: Android Phone [ 3.218735] usb 2-1.1: Manufacturer: HTC [ 3.219754] usb 2-1.1: SerialNumber: HT0BYRX01289 [ 3.220879] usb 2-1.1: usb_probe_device [ 3.220882] usb 2-1.1: configuration #1 chosen from 1 choice [ 3.221238] usb 2-1.1: adding 2-1.1:1.0 (config #1, interface 0) [ 3.223177] usb-storage 2-1.1:1.0: usb_probe_interface [ 3.223181] usb-storage 2-1.1:1.0: usb_probe_interface - got id [ 3.223226] scsi6 : usb-storage 2-1.1:1.0 [ 3.224426] usb 2-1.1: adding 2-1.1:1.1 (config #1, interface 1) [ 3.224486] drivers/usb/core/inode.c: creating file '003' [ 4.226997] scsi 6:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2 [ 4.228570] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 4.239408] usb-stor-scan used greatest stack depth: 4936 bytes left [ 4.244363] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 9.229127] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 9.500346] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9 [ 9.610124] md: Autodetecting RAID arrays. [ 9.611201] md: Scanned 0 and added 0 devices. [ 9.612265] md: autorun ... [ 9.613313] md: ... autorun DONE. [ 9.667149] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 9.668220] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 9.670247] Freeing unused kernel memory: 648k freed [ 9.671348] Write protecting the kernel read-only data: 12288k [ 9.674331] Freeing unused kernel memory: 632k freed [ 9.680404] Freeing unused kernel memory: 1768k freed [ 10.316305] rc.sysinit used greatest stack depth: 4552 bytes left [ 11.176703] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 11.178603] Copyright(c) 2003-2011 Intel Corporation [ 11.179596] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 11.180574] iwlagn 0000:03:00.0: setting latency timer to 64 [ 11.180634] iwlagn 0000:03:00.0: pci_resource_len = 0x00002000 [ 11.181598] iwlagn 0000:03:00.0: pci_resource_base = ffffc900050a4000 [ 11.182550] iwlagn 0000:03:00.0: HW Revision ID = 0x34 [ 11.183585] iwlagn 0000:03:00.0: irq 44 for MSI/MSI-X [ 11.183625] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 11.184624] iwlagn 0000:03:00.0: L1 Disabled; Enabling L0S [ 11.196099] iwlagn 0000:03:00.0: device EEPROM VER=0x715, CALIB=0x6 [ 11.197012] iwlagn 0000:03:00.0: Device SKU: 0X1f0 [ 11.197916] iwlagn 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3 [ 11.198846] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 11.488716] usb 1-1.6: link qh16-0001/ffff880118ccc000 start 2 [1/0 us] [ 11.488749] usb 1-1.6: unlink qh16-0001/ffff880118ccc000 start 2 [1/0 us] [ 11.546035] iwlagn 0000:03:00.0: loaded firmware version 17.168.5.3 build 42301 [ 11.548165] Registered led device: phy0-led [ 11.548443] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 12.362749] ip used greatest stack depth: 4056 bytes left [ 13.101714] EXT4-fs (sda1): re-mounted. Opts: (null) [ 13.273907] kjournald starting. Commit interval 5 seconds [ 13.274201] EXT3-fs (sda3): using internal journal [ 13.274206] EXT3-fs (sda3): mounted filesystem with writeback data mode [ 13.427548] Adding 4000180k swap on /dev/sda2. Priority:-1 extents:1 across:4000180k [ 19.714927] iwlagn 0000:03:00.0: L1 Disabled; Enabling L0S [ 19.716646] iwlagn 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 20.001893] iwlagn 0000:03:00.0: L1 Disabled; Enabling L0S [ 20.002058] iwlagn 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 20.117462] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.090033] usb 1-1.2: link qh8-0601/ffff880118261380 start 3 [1/2 us] [ 25.311751] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 25.362232] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 25.362756] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 80.119909] iwlagn 0000:03:00.0: L1 Disabled; Enabling L0S [ 80.120046] iwlagn 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 80.242459] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 80.509739] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 80.560392] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 80.560749] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 80.621459] iwlagn 0000:03:00.0: L1 Disabled; Enabling L0S [ 80.621598] iwlagn 0000:03:00.0: Radio type=0x1-0x2-0x0 [ 80.744308] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 86.135697] wlan0: authenticate with xx:xx:xx:xx:xx:xx (try 1) [ 86.142588] wlan0: authenticated [ 86.145735] wlan0: associate with xx:xx:xx:xx:xx:xx (try 1) [ 86.169916] wlan0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x431 status=0 aid=1) [ 86.169925] wlan0: associated [ 86.179081] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 96.657545] wlan0: no IPv6 routers present [ 110.295031] chromium-sandbo (3658): /proc/3656/oom_adj is deprecated, please use /proc/3656/oom_score_adj instead. [ 132.104960] iwlagn 0000:03:00.0: Tx aggregation enabled on ra = xx:xx:xx:xx:xx:xx tid = 0
