On Mon, Aug 29, 2011 at 02:26:45PM +0530, Vivek Natarajan wrote: > Cancel background scan based roaming behavior if the driver > is capable of handling roaming in the firmware. For fullmac > drivers like ath6kl, the roaming logic is handled in the > firmware and for supplicant to initiate roam, the station > has to disconnect completely and then reconnect with the > new AP which takes a longer time without preauth. > > Currently, if the supplicant also tries to roam, all requests > are rejected by cfg80211 resulting in a spam of log. I applied the driver.h and driver_nl80211.c parts to get the new driver flag for this, but the change to events.c did not look correct, so I left that out. wpa_supplicant will need quite a bit more changes to be able to work in ap_scan=2 like way in the default ap_scan=1 mode when the driver indicates this BSS-selection-in-driver(firmware) capability. Those changes will take care of not even getting to the wpa_supplicant_connect(), so there should be no need to modify it in the way done in this patch. -- Jouni Malinen PGP id EFC895FA -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
