Oops -- fat-fingered the linux-wireless email address...
On Mon, Sep 19, 2011 at 04:36:39PM -0400, John W. Linville wrote:
> David,
>
> Here is another big batch of updates intended for 3.2 -- still
> clearing-out the backlog...
>
> This round includes lots of updates to ath9k, b43, iwlagn, and rt2x00.
> Some cleanups go to mac80211, along with a number of mesh-mode fixes
> from Javier.
>
> Please let me know if there are problems!
>
> Thanks,
>
> John
>
> ---
>
> The following changes since commit 765cf9976e937f1cfe9159bf4534967c8bf8eb6d:
>
> tcp: md5: remove one indirection level in tcp_md5sig_pool (2011-09-17 01:15:46 -0400)
>
> are available in the git repository at:
> ssh://infradead/~/public_git/wireless-next.git for-davem
>
> Andres Salomon (1):
> libertas: prioritize usb8388_olpc.bin firmware on OLPC machines
>
> Arik Nemtsov (3):
> wl12xx: allow 11a AP-mode for wl127x devices
> mac80211: add flag to indicate HW only Tx-agg setup support
> mac80211: add ssid config to bss information in AP-mode
>
> Bill Jordan (1):
> ath9k: ath9k_hw_set_txpowerlimit sets previous txpower
>
> Christian Lamparter (1):
> minstrel_ht: fix Open BA session request floods
>
> Dan Carpenter (3):
> mac80211: handle allocation failures in mesh_pathtbl_init()
> iwlwifi: fix double assign in iwl_start_tx_ba_trans_ready()
> iwlwifi: signedness bug in iwl_trans_pcie_tx_agg_alloc()
>
> Eliad Peller (5):
> wl12xx: initialize rate_set on band rates initialization
> wl12xx: increase psm_entry_retries
> wl12xx: enter psm only after station role was started
> nl80211/cfg80211: add WIPHY_FLAG_AP_UAPSD flag
> nl80211/cfg80211/mac80211: fix wme docs
>
> Emmanuel Grumbach (6):
> iwlagn: merge iwl_pci_down and iwl_pci_remove
> iwlagn: remove priv dereferences from the transport layer
> iwlagn: clean up of transport layer
> iwlagn: move traffic_log back to upper layer
> iwlagn: iwl-trans.c can't dereference iwl_priv any more
> iwlagn: fix compilation when debug flags is unset
>
> Felix Fietkau (27):
> ath9k_hw: do not apply the 2.4 ghz ack timeout workaround to cts
> mac80211: retry sending failed BAR frames later instead of tearing down aggr
> ath9k_hw: drop an unused column in AR5008-AR9002 initvals
> ath9k_hw: fix the last register write for ar5416 addac
> ath9k: fix checks for first subframe delimiter padding
> mac80211: make ieee80211_send_bar available for drivers
> ath9k: eliminate common->{rx,tx}_chainmask
> ath9k: move a few functions around
> ath9k: always call ath_reset from workqueue context
> ath9k: merge reset related functions
> ath9k: implement .get_antenna and .set_antenna
> ath9k: fix enabling interrupts after a hardware error interrupt
> ath9k: make beacon timer initialization more reliable
> ath9k: ensure that rx is not enabled during a reset
> ath9k: remove ATH_TX_XRETRY and BUF_XRETRY flags
> ath9k: reduce the number of functions that access the tx descriptor
> ath9k: move ath_buf_set_rate to remove a forward declaration
> ath9k: call ath9k_hw_set_desc_link for beacon descriptors
> ath9k_hw: do not recalculate the descriptor checksum in ar9003_hw_fill_txdesc
> ath9k_hw: add a new API for setting tx descriptors
> ath9k: use the new API for setting tx descriptors
> ath9k_hw: remove the old tx descriptor API
> ath9k: optimize ath9k_ps_restore
> ath9k: remove a redundant check in ath_tx_form_aggr
> ath9k: optimize ath_tx_rc_status usage
> ath9k: do not insert padding into tx buffers on AR9380+
> mac80211: fix endian issues and comments for BAR failure handling
>
> Guy Eilam (1):
> wl12xx: use 2 spare TX blocks for GEM cipher
>
> Helmut Schaa (12):
> rt2x00: Minor optimizazion in txdone path
> rt2x00: Add LED_CFG register description
> rt2x00: Remove incorrect led blink
> rt2x00: Update some TX descriptor
> rt2x00: Avoid unnecessary uncached
> rt2x00: Move bssidx calculation into its own function
> rt2x00: Introduce sta_add/remove callbacks
> rt2x00: Add WCID to crypto struct
> rt2x00: Add WCID to HT TX descriptor
> rt2x00: Make use of sta_add/remove callbacks in rt2800
> rt2x00: Forbid aggregation for STAs not programmed into the hw
> rt2x00: Use the available helper functions to initialize the WCID table
>
> Javier Cardona (12):
> mac80211: Defer tranmission of mesh path errors
> mac80211: Fix RCU pointer dereference in mesh_path_discard_frame()
> mac80211: Remove mesh paths when an interface is removed
> mac80211: Improve mpath state locking
> mac80211: Remove redundant mesh path expiration checks
> mac80211: Don't iterate twice over all mpaths when once in sufficient
> mac80211: Consolidate {mesh,mpp}_path_flush into one function
> mac80211: Consolidate mesh path duplicated functions
> mac80211: Stop forwarding mesh traffic when tx queues are full
> mac80211: Start implementing QoS support for mesh interfaces
> mac80211: Mesh data frames must have the QoS header
> mac80211: Mark all mesh stations as QoS capable
>
> Joe Perches (3):
> mac80211: Remove unnecessary OOM logging messages
> rfkill: Remove unnecessary OOM logging messages
> wireless: Remove unnecessary OOM logging messages
>
> Johannes Berg (2):
> mac80211: further optimise buffer expiry timer
> cfg80211: verify format of uAPSD information
>
> John W. Linville (2):
> Merge branch 'for-linville' of git://github.com/lucacoelho/wl12xx
> Merge branch 'master' of ssh://infradead/~/public_git/wireless-next into for-davem
>
> Kalle Valo (1):
> MAINTAINERS: update ath6kl
>
> Luciano Coelho (4):
> wl12xx: add support for multiple SSIDs in sched_scan
> wl12xx: use SCAN_SSID_TYPE_PUBLIC when using the wildcard in sched_scan
> nl80211/cfg80211: add match filtering for sched_scan
> Merge branch 'wl12xx-next' into for-linville
>
> Mohammed Shafi Shajakhan (2):
> ath9k: enable LED pin for AR946/8x chipsets
> ath9k: Fix PS wrappers and enabling LED
>
> Pavel Roskin (1):
> cfg80211: print bandwidth in chan_reg_rule_print_dbg()
>
> Rafał Miłecki (20):
> b43: LCN-PHY: add R/W ops for PHY and radio
> b43: LCN-PHY: implement more PHY ops before radio init
> b43: LCN-PHY: prepare functions for channel switching
> ssb: use u16 for storing board rev
> bcma: extract some basic info about board from SPROM
> b43: LCN-PHY: implement saving and restoring PHY & radio configuration
> b43: LCN-PHY: minor fixes
> b43: LCN-PHY: put tables functions in correct file
> b43: LCN-PHY: rewrite 0x7 table at the end of init
> b43: LCN-PHY: upload additional 0x7 table
> b43: LCN-PHY: rename functions, get rid of magic names
> b43: LCN-PHY: add conditions for few operations
> b43: N-PHY: implement enabling TX power control
> b43: drop Copyright for not really copyrightable info
> b43: add my copyrights and myself as the module author
> b43: LCN-PHY: load TX gain table on init
> b43: N-PHY: use helper for checking IPA
> b43: N-PHY: replace some hacks with nice tables ops
> b43: N-PHY: split workarounds into per-PHY-ver functions
> b43: N-PHY: implement few random missing ops
>
> Rajkumar Manoharan (6):
> ath9k_hw: Fix rx latency of 11a mode
> mac80211: stop tx before doing hw config and rate update
> ath9k: Take the samples in unassociated state
> ath9k: Move cycle conters under cc_lock
> ath9k_hw: Fix magnitude/phase average in TxIQ Calibration
> ath9k_hw: Do full chip reset on 11A channels for AR9003
>
> Randy Dunlap (1):
> wireless: fix kernel-doc warning in net/cfg80211.h
>
> Senthil Balasubramanian (4):
> ath9k_hw: Add initvals and register definitions for AR946/8x chipsets.
> ath9k_hw: Split tx/rx gain table initval handling
> ath9k_hw: Add support for AR946/8x chipsets.
> ath9k_hw: move register definitions to header files
>
> Shahar Levi (1):
> mac80211: Update device channel in case of HW channel switch supported
>
> Sven Neumann (2):
> cfg80211: hold reg_mutex when updating regulatory
> cfg80211: reorder code to obsolete forward declaration
>
> Thomas Pedersen (1):
> mac80211: check if mesh frame is in RMC after decrypt
>
> Vivek Natarajan (1):
> cfg80211/nl80211: Indicate roaming feature capability to userspace.
>
> Wey-Yi Guy (4):
> iwlagn: only perform necessary calibration at init time
> iwlagn: disply queue read/write pointer when stuck
> iwlagn: enable 11n support for "_d" sku
> iwlagn: remove lines from the wrong place
>
> Yogesh Ashok Powar (2):
> mwl8k: Set hardware flag IEEE80211_HW_AP_LINK_PS
> mwifiex: replace kmalloc & memcpy sequence with kmemdup
>
> zero.lin (1):
> rt2x00: Add new chipset support
>
> MAINTAINERS | 14 +-
> drivers/bcma/sprom.c | 9 +
> drivers/net/wireless/ath/ath.h | 3 -
> drivers/net/wireless/ath/ath9k/ar5008_initvals.h | 131 +-
> drivers/net/wireless/ath/ath9k/ar9001_initvals.h | 266 +-
> drivers/net/wireless/ath/ath9k/ar9002_hw.c | 48 +-
> drivers/net/wireless/ath/ath9k/ar9002_initvals.h | 3403 ++++++++++----------
> drivers/net/wireless/ath/ath9k/ar9002_mac.c | 257 +-
> drivers/net/wireless/ath/ath9k/ar9003_calib.c | 17 +-
> drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 117 +-
> drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 3 +-
> drivers/net/wireless/ath/ath9k/ar9003_hw.c | 581 +++-
> drivers/net/wireless/ath/ath9k/ar9003_mac.c | 331 +--
> drivers/net/wireless/ath/ath9k/ar9003_paprd.c | 15 +-
> drivers/net/wireless/ath/ath9k/ar9003_phy.c | 10 +
> drivers/net/wireless/ath/ath9k/ar9003_phy.h | 100 +-
> .../net/wireless/ath/ath9k/ar9480_1p0_initvals.h | 1833 +++++++++++
> .../net/wireless/ath/ath9k/ar9480_2p0_initvals.h | 1928 +++++++++++
> drivers/net/wireless/ath/ath9k/ath9k.h | 14 +-
> drivers/net/wireless/ath/ath9k/beacon.c | 56 +-
> drivers/net/wireless/ath/ath9k/debug.c | 41 +-
> drivers/net/wireless/ath/ath9k/debug.h | 6 +-
> drivers/net/wireless/ath/ath9k/gpio.c | 2 +
> drivers/net/wireless/ath/ath9k/htc_drv_init.c | 7 +-
> drivers/net/wireless/ath/ath9k/htc_drv_main.c | 3 +-
> drivers/net/wireless/ath/ath9k/hw-ops.h | 58 +-
> drivers/net/wireless/ath/ath9k/hw.c | 102 +-
> drivers/net/wireless/ath/ath9k/hw.h | 28 +-
> drivers/net/wireless/ath/ath9k/init.c | 42 +-
> drivers/net/wireless/ath/ath9k/mac.c | 12 -
> drivers/net/wireless/ath/ath9k/mac.h | 42 +-
> drivers/net/wireless/ath/ath9k/main.c | 535 ++--
> drivers/net/wireless/ath/ath9k/pci.c | 5 +-
> drivers/net/wireless/ath/ath9k/recv.c | 7 +-
> drivers/net/wireless/ath/ath9k/reg.h | 62 +-
> drivers/net/wireless/ath/ath9k/xmit.c | 607 ++--
> drivers/net/wireless/b43/b43.h | 2 +
> drivers/net/wireless/b43/bus.c | 2 +
> drivers/net/wireless/b43/main.c | 3 +
> drivers/net/wireless/b43/phy_ht.c | 2 +
> drivers/net/wireless/b43/phy_lcn.c | 288 ++-
> drivers/net/wireless/b43/phy_n.c | 543 ++--
> drivers/net/wireless/b43/phy_n.h | 4 +
> drivers/net/wireless/b43/radio_2055.c | 1 +
> drivers/net/wireless/b43/radio_2056.c | 2 +
> drivers/net/wireless/b43/radio_2056.h | 26 -
> drivers/net/wireless/b43/radio_2059.c | 2 +
> drivers/net/wireless/b43/tables_nphy.c | 1 +
> drivers/net/wireless/b43/tables_phy_ht.c | 2 +
> drivers/net/wireless/b43/tables_phy_lcn.c | 255 ++-
> drivers/net/wireless/b43/tables_phy_lcn.h | 2 +
> drivers/net/wireless/iwlwifi/iwl-2000.c | 1 +
> drivers/net/wireless/iwlwifi/iwl-agn-lib.c | 2 +-
> drivers/net/wireless/iwlwifi/iwl-agn-rxon.c | 4 +-
> drivers/net/wireless/iwlwifi/iwl-agn-tt.h | 1 -
> drivers/net/wireless/iwlwifi/iwl-agn-tx.c | 2 +-
> drivers/net/wireless/iwlwifi/iwl-agn-ucode.c | 5 +-
> drivers/net/wireless/iwlwifi/iwl-agn.c | 10 +-
> drivers/net/wireless/iwlwifi/iwl-agn.h | 2 -
> drivers/net/wireless/iwlwifi/iwl-commands.h | 7 +-
> drivers/net/wireless/iwlwifi/iwl-core.c | 19 +-
> drivers/net/wireless/iwlwifi/iwl-core.h | 22 -
> drivers/net/wireless/iwlwifi/iwl-csr.h | 18 +
> drivers/net/wireless/iwlwifi/iwl-debugfs.c | 85 +
> drivers/net/wireless/iwlwifi/iwl-dev.h | 202 +--
> drivers/net/wireless/iwlwifi/iwl-helpers.h | 23 -
> drivers/net/wireless/iwlwifi/iwl-pci.c | 18 +-
> drivers/net/wireless/iwlwifi/iwl-rx.c | 83 +-
> drivers/net/wireless/iwlwifi/iwl-shared.h | 52 +
> drivers/net/wireless/iwlwifi/iwl-sta.c | 4 +-
> drivers/net/wireless/iwlwifi/iwl-sv-open.c | 1 +
> drivers/net/wireless/iwlwifi/iwl-trans-int-pcie.h | 110 +-
> drivers/net/wireless/iwlwifi/iwl-trans-rx-pcie.c | 45 +-
> drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c | 130 +-
> drivers/net/wireless/iwlwifi/iwl-trans.c | 402 +--
> drivers/net/wireless/iwlwifi/iwl-trans.h | 66 +-
> drivers/net/wireless/libertas/if_usb.c | 21 +
> drivers/net/wireless/mwifiex/join.c | 3 +-
> drivers/net/wireless/mwifiex/scan.c | 6 +-
> drivers/net/wireless/mwifiex/sta_ioctl.c | 9 +-
> drivers/net/wireless/mwl8k.c | 8 +
> drivers/net/wireless/rt2x00/rt2800.h | 3 +
> drivers/net/wireless/rt2x00/rt2800lib.c | 191 +-
> drivers/net/wireless/rt2x00/rt2800lib.h | 5 +-
> drivers/net/wireless/rt2x00/rt2800pci.c | 15 +-
> drivers/net/wireless/rt2x00/rt2800usb.c | 7 +-
> drivers/net/wireless/rt2x00/rt2x00.h | 30 +
> drivers/net/wireless/rt2x00/rt2x00dev.c | 21 +
> drivers/net/wireless/rt2x00/rt2x00mac.c | 50 +-
> drivers/net/wireless/rt2x00/rt2x00queue.c | 7 +-
> drivers/net/wireless/rt2x00/rt2x00queue.h | 5 +-
> drivers/net/wireless/wl12xx/boot.c | 4 +-
> drivers/net/wireless/wl12xx/main.c | 50 +-
> drivers/net/wireless/wl12xx/scan.c | 66 +-
> drivers/net/wireless/wl12xx/tx.c | 8 +-
> drivers/net/wireless/wl12xx/tx.h | 1 +
> drivers/net/wireless/wl12xx/wl12xx.h | 3 +
> include/linux/ieee80211.h | 2 +
> include/linux/nl80211.h | 57 +-
> include/linux/ssb/ssb.h | 2 +-
> include/net/cfg80211.h | 31 +
> include/net/mac80211.h | 29 +
> net/mac80211/agg-rx.c | 19 +-
> net/mac80211/agg-tx.c | 42 +-
> net/mac80211/cfg.c | 21 +-
> net/mac80211/debugfs.c | 5 +
> net/mac80211/debugfs_netdev.c | 3 +
> net/mac80211/ht.c | 6 +-
> net/mac80211/ieee80211_i.h | 3 +-
> net/mac80211/iface.c | 6 +
> net/mac80211/mesh.c | 8 +-
> net/mac80211/mesh.h | 6 +-
> net/mac80211/mesh_hwmp.c | 31 +-
> net/mac80211/mesh_pathtbl.c | 192 +-
> net/mac80211/mesh_plink.c | 2 +-
> net/mac80211/mlme.c | 36 +-
> net/mac80211/rc80211_minstrel_ht.c | 3 +-
> net/mac80211/rx.c | 35 +-
> net/mac80211/spectmgmt.c | 6 +-
> net/mac80211/sta_info.c | 10 +-
> net/mac80211/sta_info.h | 5 +
> net/mac80211/status.c | 53 +-
> net/mac80211/tx.c | 26 +-
> net/mac80211/util.c | 13 +-
> net/mac80211/wme.c | 16 +-
> net/mac80211/wme.h | 3 +-
> net/mac80211/work.c | 6 +-
> net/rfkill/rfkill-regulator.c | 1 -
> net/wireless/core.c | 2 +-
> net/wireless/core.h | 2 -
> net/wireless/lib80211_crypt_ccmp.c | 2 -
> net/wireless/lib80211_crypt_tkip.c | 4 -
> net/wireless/lib80211_crypt_wep.c | 4 -
> net/wireless/nl80211.c | 73 +-
> net/wireless/reg.c | 33 +-
> net/wireless/reg.h | 2 +
> net/wireless/util.c | 5 +-
> 137 files changed, 9864 insertions(+), 4598 deletions(-)
> create mode 100644 drivers/net/wireless/ath/ath9k/ar9480_1p0_initvals.h
> create mode 100644 drivers/net/wireless/ath/ath9k/ar9480_2p0_initvals.h
>
> Omnibus patch is available here:
>
> http://bombadil.infradead.org/~linville/wireless-next-2011-09-19.patch.gz
>
> --
> John W. Linville Someday the world will need a hero, and you
> linville@xxxxxxxxxxxxx might be all we have. Be ready.
--
John W. Linville Someday the world will need a hero, and you
linville@xxxxxxxxxxxxx might be all we have. Be ready.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
