From: Ilan Elias <ilane@xxxxxx>
Signed-off-by: Ilan Elias <ilane@xxxxxx>
---
drivers/nfc/Kconfig | 11 ++
drivers/nfc/Makefile | 1 +
drivers/nfc/nfcwilink.c | 342 +++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 354 insertions(+), 0 deletions(-)
create mode 100644 drivers/nfc/nfcwilink.c
diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig
index 2acff43..8a56fd3 100644
--- a/drivers/nfc/Kconfig
+++ b/drivers/nfc/Kconfig
@@ -27,4 +27,15 @@ config NFC_PN533
Say Y here to compile support for PN533 devices into the
kernel or say M to compile it as module (pn533).
+config NFC_WILINK
+ tristate "Texas Instruments NFC WiLink driver"
+ depends on TI_ST
+ help
+ This enables the NFC driver for Texas Instrument's BT/FM/GPS/NFC
+ combo devices. This makes use of shared transport line discipline
+ core driver to communicate with the NFC core of the combo chip.
+
+ Say Y here to compile support for Texas Instrument's NFC WiLink driver
+ into the kernel or say M to compile it as module.
+
endmenu
diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile
index 8ef446d..ab99e85 100644
--- a/drivers/nfc/Makefile
+++ b/drivers/nfc/Makefile
@@ -4,5 +4,6 @@
obj-$(CONFIG_PN544_NFC) += pn544.o
obj-$(CONFIG_NFC_PN533) += pn533.o
+obj-$(CONFIG_NFC_WILINK) += nfcwilink.o
ccflags-$(CONFIG_NFC_DEBUG) := -DDEBUG
diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c
new file mode 100644
index 0000000..5b0f1ff
--- /dev/null
+++ b/drivers/nfc/nfcwilink.c
@@ -0,0 +1,342 @@
+/*
+ * Texas Instrument's NFC Driver For Shared Transport.
+ *
+ * NFC Driver acts as interface between NCI core and
+ * TI Shared Transport Layer.
+ *
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ *
+ * Written by Ilan Elias <ilane@xxxxxx>
+ *
+ * Acknowledgements:
+ * This file is based on btwilink.c, which was written
+ * by Raja Mani and Pavan Savoy.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#include <linux/platform_device.h>
+#include <linux/nfc.h>
+#include <net/nfc/nci.h>
+#include <net/nfc/nci_core.h>
+#include <linux/ti_wilink_st.h>
+
+#define NFCWILINK_CHNL 12
+#define NFCWILINK_OPCODE 7
+#define NFCWILINK_MAX_FRAME_SIZE 300
+#define NFCWILINK_HDR_LEN 4
+#define NFCWILINK_OFFSET_LEN_IN_HDR 1
+#define NFCWILINK_LEN_SIZE 2
+#define NFCWILINK_REGISTER_TIMEOUT 8000 /* 8 sec */
+
+struct nfcwilink_hdr {
+ u8 chnl;
+ u8 opcode;
+ u16 len;
+} __packed;
+
+struct nfcwilink {
+ struct platform_device *pdev;
+ struct nci_dev *ndev;
+ unsigned long flags;
+
+ char st_register_cb_status;
+ long (*st_write) (struct sk_buff *);
+ struct completion st_register_completed;
+};
+
+/* NFCWILINK driver flags */
+enum {
+ NFCWILINK_RUNNING,
+};
+
+/* Called by ST when registration is complete */
+static void nfcwilink_register_complete(void *priv_data, char data)
+{
+ struct nfcwilink *drv = priv_data;
+
+ nfc_dev_dbg(&drv->pdev->dev, "register_complete entry");
+
+ /* store ST registration status */
+ drv->st_register_cb_status = data;
+
+ /* complete the wait in nfc_st_open() */
+ complete(&drv->st_register_completed);
+}
+
+/* Called by ST when receive data is available */
+static long nfcwilink_receive(void *priv_data, struct sk_buff *skb)
+{
+ struct nfcwilink *drv = priv_data;
+ int rc;
+
+ nfc_dev_dbg(&drv->pdev->dev, "receive entry, len %d", skb->len);
+
+ if (!skb)
+ return -EFAULT;
+
+ if (!drv) {
+ kfree_skb(skb);
+ return -EFAULT;
+ }
+
+ /* strip the ST header
+ (apart for the chnl byte, which is not received in the hdr) */
+ skb_pull(skb, (NFCWILINK_HDR_LEN-1));
+
+ skb->dev = (void *) drv->ndev;
+
+ /* Forward skb to NCI core layer */
+ rc = nci_recv_frame(skb);
+ if (rc < 0) {
+ nfc_dev_err(&drv->pdev->dev, "nci_recv_frame failed %d", rc);
+ return rc;
+ }
+
+ return 0;
+}
+
+/* protocol structure registered with ST */
+static struct st_proto_s nfcwilink_proto = {
+ .chnl_id = NFCWILINK_CHNL,
+ .max_frame_size = NFCWILINK_MAX_FRAME_SIZE,
+ .hdr_len = (NFCWILINK_HDR_LEN-1), /* not including chnl byte */
+ .offset_len_in_hdr = NFCWILINK_OFFSET_LEN_IN_HDR,
+ .len_size = NFCWILINK_LEN_SIZE,
+ .reserve = 0,
+ .recv = nfcwilink_receive,
+ .reg_complete_cb = nfcwilink_register_complete,
+ .write = NULL,
+};
+
+static int nfcwilink_open(struct nci_dev *ndev)
+{
+ struct nfcwilink *drv = nci_get_drvdata(ndev);
+ unsigned long comp_ret;
+ int rc;
+
+ nfc_dev_dbg(&drv->pdev->dev, "open entry");
+
+ if (test_and_set_bit(NFCWILINK_RUNNING, &drv->flags)) {
+ rc = -EBUSY;
+ goto exit;
+ }
+
+ nfcwilink_proto.priv_data = drv;
+
+ init_completion(&drv->st_register_completed);
+ drv->st_register_cb_status = -EINPROGRESS;
+
+ rc = st_register(&nfcwilink_proto);
+ if (rc < 0) {
+ if (rc == -EINPROGRESS) {
+ comp_ret = wait_for_completion_timeout(
+ &drv->st_register_completed,
+ msecs_to_jiffies(NFCWILINK_REGISTER_TIMEOUT));
+
+ nfc_dev_dbg(&drv->pdev->dev,
+ "wait_for_completion_timeout returned %ld",
+ comp_ret);
+
+ if (comp_ret == 0) {
+ /* timeout */
+ rc = -ETIMEDOUT;
+ goto clear_exit;
+ } else if (drv->st_register_cb_status != 0) {
+ rc = drv->st_register_cb_status;
+ nfc_dev_err(&drv->pdev->dev,
+ "st_register_cb failed %d", rc);
+ goto clear_exit;
+ }
+ } else {
+ nfc_dev_err(&drv->pdev->dev,
+ "st_register failed %d", rc);
+ goto clear_exit;
+ }
+ }
+
+ /* st_register MUST fill the write callback */
+ BUG_ON(nfcwilink_proto.write == NULL);
+ drv->st_write = nfcwilink_proto.write;
+
+ goto exit;
+
+clear_exit:
+ clear_bit(NFCWILINK_RUNNING, &drv->flags);
+
+exit:
+ return rc;
+}
+
+static int nfcwilink_close(struct nci_dev *ndev)
+{
+ struct nfcwilink *drv = nci_get_drvdata(ndev);
+ int rc;
+
+ nfc_dev_dbg(&drv->pdev->dev, "close entry");
+
+ if (!test_and_clear_bit(NFCWILINK_RUNNING, &drv->flags))
+ return 0;
+
+ rc = st_unregister(&nfcwilink_proto);
+ if (rc)
+ nfc_dev_err(&drv->pdev->dev, "st_unregister failed %d", rc);
+
+ drv->st_write = NULL;
+
+ return rc;
+}
+
+static int nfcwilink_send(struct sk_buff *skb)
+{
+ struct nci_dev *ndev = (struct nci_dev *)skb->dev;
+ struct nfcwilink *drv = nci_get_drvdata(ndev);
+ struct nfcwilink_hdr hdr = {NFCWILINK_CHNL, NFCWILINK_OPCODE, 0x0000};
+ long len;
+
+ nfc_dev_dbg(&drv->pdev->dev, "send entry, len %d", skb->len);
+
+ if (!test_bit(NFCWILINK_RUNNING, &drv->flags))
+ return -EBUSY;
+
+ /* add the ST hdr to the start of the buffer */
+ hdr.len = skb->len;
+ memcpy(skb_push(skb, NFCWILINK_HDR_LEN), &hdr, NFCWILINK_HDR_LEN);
+
+ /* Insert skb to shared transport layer's transmit queue.
+ * Freeing skb memory is taken care in shared transport layer,
+ * so don't free skb memory here.
+ */
+ len = drv->st_write(skb);
+ if (len < 0) {
+ kfree_skb(skb);
+ nfc_dev_err(&drv->pdev->dev, "st_write failed %ld", len);
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static struct nci_ops nfcwilink_ops = {
+ .open = nfcwilink_open,
+ .close = nfcwilink_close,
+ .send = nfcwilink_send,
+};
+
+static int nfcwilink_probe(struct platform_device *pdev)
+{
+ static struct nfcwilink *drv;
+ int rc;
+ u32 protocols;
+
+ nfc_dev_dbg(&pdev->dev, "probe entry");
+
+ drv = kzalloc(sizeof(struct nfcwilink), GFP_KERNEL);
+ if (!drv) {
+ rc = -ENOMEM;
+ goto exit;
+ }
+
+ drv->pdev = pdev;
+
+ protocols = NFC_PROTO_JEWEL_MASK
+ | NFC_PROTO_MIFARE_MASK | NFC_PROTO_FELICA_MASK
+ | NFC_PROTO_ISO14443_MASK
+ | NFC_PROTO_NFC_DEP_MASK;
+
+ drv->ndev = nci_allocate_device(&nfcwilink_ops,
+ protocols,
+ NFCWILINK_HDR_LEN,
+ 0);
+ if (!drv->ndev) {
+ nfc_dev_err(&pdev->dev, "nci_allocate_device failed");
+ rc = -ENOMEM;
+ goto free_exit;
+ }
+
+ nci_set_parent_dev(drv->ndev, &pdev->dev);
+ nci_set_drvdata(drv->ndev, drv);
+
+ rc = nci_register_device(drv->ndev);
+ if (rc < 0) {
+ nfc_dev_err(&pdev->dev, "nci_register_device failed %d", rc);
+ goto free_dev_exit;
+ }
+
+ dev_set_drvdata(&pdev->dev, drv);
+
+ goto exit;
+
+free_dev_exit:
+ nci_free_device(drv->ndev);
+
+free_exit:
+ kfree(drv);
+
+exit:
+ return rc;
+}
+
+static int nfcwilink_remove(struct platform_device *pdev)
+{
+ struct nfcwilink *drv = dev_get_drvdata(&pdev->dev);
+ struct nci_dev *ndev;
+
+ nfc_dev_dbg(&pdev->dev, "remove entry");
+
+ if (!drv)
+ return -EFAULT;
+
+ ndev = drv->ndev;
+
+ nci_unregister_device(ndev);
+ nci_free_device(ndev);
+
+ kfree(drv);
+
+ dev_set_drvdata(&pdev->dev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver nfcwilink_driver = {
+ .probe = nfcwilink_probe,
+ .remove = nfcwilink_remove,
+ .driver = {
+ .name = "nfcwilink",
+ .owner = THIS_MODULE,
+ },
+};
+
+/* ------- Module Init/Exit interfaces ------ */
+static int __init nfcwilink_init(void)
+{
+ printk(KERN_INFO "NFC Driver for TI WiLink");
+
+ return platform_driver_register(&nfcwilink_driver);
+}
+
+static void __exit nfcwilink_exit(void)
+{
+ platform_driver_unregister(&nfcwilink_driver);
+}
+
+module_init(nfcwilink_init);
+module_exit(nfcwilink_exit);
+
+/* ------ Module Info ------ */
+
+MODULE_AUTHOR("Ilan Elias <ilane@xxxxxx>");
+MODULE_DESCRIPTION("NFC Driver for TI Shared Transport");
+MODULE_LICENSE("GPL");
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
