Substituted/removed macro's.
Reported-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Signed-off-by: Roland Vossen <rvossen@xxxxxxxxxxxx>
Reviewed-by: Arend van Spriel <arend@xxxxxxxxxxxx>
---
drivers/staging/brcm80211/brcmsmac/ampdu.c | 4 +
drivers/staging/brcm80211/brcmsmac/main.c | 6 +-
drivers/staging/brcm80211/brcmsmac/phy/phy_cmn.c | 14 ++-
drivers/staging/brcm80211/brcmsmac/phy/phy_lcn.c | 7 +-
drivers/staging/brcm80211/brcmsmac/phy/phy_n.c | 17 ++-
drivers/staging/brcm80211/brcmsmac/pub.h | 6 +-
drivers/staging/brcm80211/brcmsmac/types.h | 2 +
drivers/staging/brcm80211/include/brcmu_utils.h | 161 +++++++++++-----------
8 files changed, 115 insertions(+), 102 deletions(-)
diff --git a/drivers/staging/brcm80211/brcmsmac/ampdu.c b/drivers/staging/brcm80211/brcmsmac/ampdu.c
index 9c1ae7c..efae10f 100644
--- a/drivers/staging/brcm80211/brcmsmac/ampdu.c
+++ b/drivers/staging/brcm80211/brcmsmac/ampdu.c
@@ -69,6 +69,10 @@
AMPDU_DELIMITER_LEN + 3\
+ DOT11_A4_HDR_LEN + DOT11_QOS_LEN + DOT11_IV_MAX_LEN)
+/* modulo add/sub, bound = 2^k */
+#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1))
+#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1))
+
/* structure to hold tx fifo information and pre-loading state
* counters specific to tx underflows of ampdus
* some counters might be redundant with the ones in wlc or ampdu structures.
diff --git a/drivers/staging/brcm80211/brcmsmac/main.c b/drivers/staging/brcm80211/brcmsmac/main.c
index 7cd3b9e..51ad7f0 100644
--- a/drivers/staging/brcm80211/brcmsmac/main.c
+++ b/drivers/staging/brcm80211/brcmsmac/main.c
@@ -186,6 +186,8 @@
#define BRCMS_HWRXOFF 38 /* chip rx buffer offset */
+#define OSL_SYSUPTIME() ((u32)jiffies * (1000 / HZ))
+
/*
* driver maintains internal 'tick'(wlc->pub->now) which increments in 1s
* OS timer(soft watchdog) it is not a wall clock and won't increment when
@@ -7863,8 +7865,8 @@ void brcms_c_send_q(struct brcms_c_info *wlc)
int prio;
for (prio = MAXPRIO; prio >= 0; prio--) {
if (brcms_c_txflowcontrol_prio_isset(wlc, qi, prio) &&
- (pktq_plen(q, wlc_prio2prec_map[prio]) <
- wlc->pub->tunables->datahiwat / 2))
+ q->q[wlc_prio2prec_map[prio]].len <
+ wlc->pub->tunables->datahiwat / 2)
brcms_c_txflowcontrol(wlc, qi, OFF, prio);
}
}
diff --git a/drivers/staging/brcm80211/brcmsmac/phy/phy_cmn.c b/drivers/staging/brcm80211/brcmsmac/phy/phy_cmn.c
index a159961..119a127 100644
--- a/drivers/staging/brcm80211/brcmsmac/phy/phy_cmn.c
+++ b/drivers/staging/brcm80211/brcmsmac/phy/phy_cmn.c
@@ -13,7 +13,7 @@
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-
+#include <linux/kernel.h>
#include <linux/delay.h>
#include <brcm_hw_ids.h>
@@ -37,6 +37,16 @@
(ISNPHY(pi) ? VALID_N_RADIO(radioid) : false) || \
(ISLCNPHY(pi) ? VALID_LCN_RADIO(radioid) : false))
+/* basic mux operation - can be optimized on several architectures */
+#define MUX(pred, true, false) ((pred) ? (true) : (false))
+
+/* modulo inc/dec - assumes x E [0, bound - 1] */
+#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1)
+
+/* modulo inc/dec, bound = 2^k */
+#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1))
+#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1))
+
struct chan_info_basic {
u16 chan;
u16 freq;
@@ -2879,7 +2889,7 @@ u8 wlc_phy_nbits(s32 value)
s32 abs_val;
u8 nbits = 0;
- abs_val = ABS(value);
+ abs_val = abs(value);
while ((abs_val >> nbits) > 0)
nbits++;
diff --git a/drivers/staging/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/staging/brcm80211/brcmsmac/phy/phy_lcn.c
index fa21734..46661b8 100644
--- a/drivers/staging/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/staging/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -14,6 +14,7 @@
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/cordic.h>
@@ -3378,9 +3379,9 @@ wlc_lcnphy_start_tx_tone(struct brcms_phy *pi, s32 f_kHz, u16 max_val,
k = 1;
do {
bw = phy_bw * 1000 * k;
- num_samps = bw / ABS(f_kHz);
+ num_samps = bw / abs(f_kHz);
k++;
- } while ((num_samps * (u32) (ABS(f_kHz))) != bw);
+ } while ((num_samps * (u32) (abs(f_kHz))) != bw);
} else
num_samps = 2;
@@ -3894,7 +3895,7 @@ static void wlc_lcnphy_txpwrtbl_iqlo_cal(struct brcms_phy *pi)
}
wlc_lcnphy_get_radio_loft(pi, &ei0, &eq0, &fi0, &fq0);
- if ((ABS((s8) fi0) == 15) && (ABS((s8) fq0) == 15)) {
+ if ((abs((s8) fi0) == 15) && (abs((s8) fq0) == 15)) {
if (CHSPEC_IS5G(pi->radio_chanspec)) {
target_gains.gm_gain = 255;
target_gains.pga_gain = 255;
diff --git a/drivers/staging/brcm80211/brcmsmac/phy/phy_n.c b/drivers/staging/brcm80211/brcmsmac/phy/phy_n.c
index 7a50a23..58645d2 100644
--- a/drivers/staging/brcm80211/brcmsmac/phy/phy_n.c
+++ b/drivers/staging/brcm80211/brcmsmac/phy/phy_n.c
@@ -14,6 +14,7 @@
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/cordic.h>
@@ -22648,7 +22649,7 @@ static void wlc_phy_rssi_cal_nphy_rev3(struct brcms_phy *pi)
poll_results[vcm_final][result_idx];
if (fine_digital_offset[result_idx] < 0) {
fine_digital_offset[result_idx] =
- ABS(fine_digital_offset
+ abs(fine_digital_offset
[result_idx]);
fine_digital_offset[result_idx] +=
(NPHY_RSSICAL_NPOLL / 2);
@@ -22727,7 +22728,7 @@ static void wlc_phy_rssi_cal_nphy_rev3(struct brcms_phy *pi)
if (fine_digital_offset[result_idx] <
0) {
fine_digital_offset[result_idx]
- = ABS(
+ = abs(
fine_digital_offset
[result_idx]);
fine_digital_offset[result_idx]
@@ -23004,7 +23005,7 @@ static void wlc_phy_rssi_cal_nphy_rev2(struct brcms_phy *pi, u8 rssi_type)
min_vcm = 0;
min_poll = NPHY_RSSICAL_MAXREAD * NPHY_RSSICAL_NPOLL + 1;
for (vcm = 0; vcm < 4; vcm++) {
- curr_d = ABS(((rssi_type == NPHY_RSSI_SEL_NB) ?
+ curr_d = abs(((rssi_type == NPHY_RSSI_SEL_NB) ?
poll_results[vcm][result_idx] :
poll_miniq[vcm][result_idx / 2]) -
(target_code * NPHY_RSSICAL_NPOLL));
@@ -23028,7 +23029,7 @@ static void wlc_phy_rssi_cal_nphy_rev2(struct brcms_phy *pi, u8 rssi_type)
poll_results[vcm_final[result_idx]][result_idx];
if (fine_digital_offset[result_idx] < 0) {
fine_digital_offset[result_idx] =
- ABS(fine_digital_offset[result_idx]);
+ abs(fine_digital_offset[result_idx]);
fine_digital_offset[result_idx] +=
(NPHY_RSSICAL_NPOLL / 2);
fine_digital_offset[result_idx] /= NPHY_RSSICAL_NPOLL;
@@ -27422,9 +27423,9 @@ wlc_phy_rc_sweep_nphy(struct brcms_phy *pi, u8 core_idx, u8 loopback_type)
if (rccal_stepsize == -1) {
best_rccal_val =
- (ABS((int)last_pwr_ratio -
+ (abs((int)last_pwr_ratio -
(int)target_pwr_ratio) <
- ABS((int)pwr_ratio -
+ abs((int)pwr_ratio -
(int)target_pwr_ratio)) ? last_rccal_val :
rccal_val;
@@ -28324,10 +28325,10 @@ void wlc_phy_txpwr_papd_cal_nphy(struct brcms_phy *pi)
|| (wlc_phy_txpwr_ison_nphy(pi)
&&
(((u32)
- ABS(wlc_phy_txpwr_idx_cur_get_nphy(pi, 0) -
+ abs(wlc_phy_txpwr_idx_cur_get_nphy(pi, 0) -
pi->nphy_papd_tx_gain_at_last_cal[0]) >= 4)
|| ((u32)
- ABS(wlc_phy_txpwr_idx_cur_get_nphy(pi, 1) -
+ abs(wlc_phy_txpwr_idx_cur_get_nphy(pi, 1) -
pi->nphy_papd_tx_gain_at_last_cal[1]) >= 4)))))
wlc_phy_a4(pi, true);
}
diff --git a/drivers/staging/brcm80211/brcmsmac/pub.h b/drivers/staging/brcm80211/brcmsmac/pub.h
index f623d6e..381ddb4 100644
--- a/drivers/staging/brcm80211/brcmsmac/pub.h
+++ b/drivers/staging/brcm80211/brcmsmac/pub.h
@@ -237,11 +237,7 @@ struct brcms_pub {
*/
bool align_wd_tbtt; /* Align watchdog with tbtt indication
* handling. This flag is cleared by default
- * and is set by per port code explicitly and
- * you need to make sure the OSL_SYSUPTIME()
- * is implemented properly in osl of that port
- * when it enables this Power Save feature.
- */
+ * and is set explicitly */
u16 boardrev; /* version # of particular board */
u8 sromrev; /* version # of the srom */
diff --git a/drivers/staging/brcm80211/brcmsmac/types.h b/drivers/staging/brcm80211/brcmsmac/types.h
index f9794dc..a3af57c 100644
--- a/drivers/staging/brcm80211/brcmsmac/types.h
+++ b/drivers/staging/brcm80211/brcmsmac/types.h
@@ -341,6 +341,8 @@ do { \
#define mboolisset(mb, bit) (((mb) & (bit)) != 0)
#define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val)))
+#define CEIL(x, y) (((x) + ((y)-1)) / (y))
+
/* forward declarations */
struct wiphy;
struct ieee80211_sta;
diff --git a/drivers/staging/brcm80211/include/brcmu_utils.h b/drivers/staging/brcm80211/include/brcmu_utils.h
index de627c2..6339721 100644
--- a/drivers/staging/brcm80211/include/brcmu_utils.h
+++ b/drivers/staging/brcm80211/include/brcmu_utils.h
@@ -48,6 +48,34 @@ struct brcmu_strbuf {
#define PKTQ_LEN_DEFAULT 128 /* Max 128 packets */
#define PKTQ_MAX_PREC 16 /* Maximum precedence levels */
+#define BCME_STRLEN 64 /* Max string length for BCM errors */
+
+/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */
+#define PKTBUFSZ 2048
+
+#ifndef setbit
+#ifndef NBBY /* the BSD family defines NBBY */
+#define NBBY 8 /* 8 bits per byte */
+#endif /* #ifndef NBBY */
+#define setbit(a, i) (((u8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY))
+#define clrbit(a, i) (((u8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
+#define isset(a, i) (((const u8 *)a)[(i)/NBBY] & (1<<((i)%NBBY)))
+#define isclr(a, i) ((((const u8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
+#endif /* setbit */
+
+#define NBITS(type) (sizeof(type) * 8)
+#define NBITVAL(nbits) (1 << (nbits))
+#define MAXBITVAL(nbits) ((1 << (nbits)) - 1)
+#define NBITMASK(nbits) MAXBITVAL(nbits)
+#define MAXNBVAL(nbyte) MAXBITVAL((nbyte) * 8)
+
+/* crc defines */
+#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */
+#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */
+
+/* 18-bytes of Ethernet address buffer length */
+#define ETHER_ADDR_STR_LEN 18
+
struct pktq_prec {
struct sk_buff *head; /* first packet to dequeue */
struct sk_buff *tail; /* last packet to dequeue */
@@ -70,14 +98,35 @@ struct pktq {
/* operations on a specific precedence in packet queue */
-#define pktq_psetmax(pq, prec, _max) ((pq)->q[prec].max = (_max))
-#define pktq_plen(pq, prec) ((pq)->q[prec].len)
-#define pktq_pavail(pq, prec) ((pq)->q[prec].max - (pq)->q[prec].len)
-#define pktq_pfull(pq, prec) ((pq)->q[prec].len >= (pq)->q[prec].max)
-#define pktq_pempty(pq, prec) ((pq)->q[prec].len == 0)
+static inline int pktq_plen(struct pktq *pq, int prec)
+{
+ return pq->q[prec].len;
+}
-#define pktq_ppeek(pq, prec) ((pq)->q[prec].head)
-#define pktq_ppeek_tail(pq, prec) ((pq)->q[prec].tail)
+static inline int pktq_pavail(struct pktq *pq, int prec)
+{
+ return pq->q[prec].max - pq->q[prec].len;
+}
+
+static inline bool pktq_pfull(struct pktq *pq, int prec)
+{
+ return pq->q[prec].len >= pq->q[prec].max;
+}
+
+static inline bool pktq_pempty(struct pktq *pq, int prec)
+{
+ return pq->q[prec].len == 0;
+}
+
+static inline struct sk_buff *pktq_ppeek(struct pktq *pq, int prec)
+{
+ return pq->q[prec].head;
+}
+
+static inline struct sk_buff *pktq_ppeek_tail(struct pktq *pq, int prec)
+{
+ return pq->q[prec].tail;
+}
extern struct sk_buff *brcmu_pktq_penq(struct pktq *pq, int prec,
struct sk_buff *p);
@@ -103,19 +152,30 @@ extern struct sk_buff *brcmu_pktq_mdeq(struct pktq *pq, uint prec_bmp,
/* operations on packet queue as a whole */
-#define pktq_len(pq) ((int)(pq)->len)
-#define pktq_max(pq) ((int)(pq)->max)
-#define pktq_avail(pq) ((int)((pq)->max - (pq)->len))
-#define pktq_full(pq) ((pq)->len >= (pq)->max)
-#define pktq_empty(pq) ((pq)->len == 0)
+static inline int pktq_len(struct pktq *pq)
+{
+ return (int)pq->len;
+}
+
+static inline int pktq_max(struct pktq *pq)
+{
+ return (int)pq->max;
+}
+
+static inline int pktq_avail(struct pktq *pq)
+{
+ return (int)(pq->max - pq->len);
+}
+
+static inline bool pktq_full(struct pktq *pq)
+{
+ return pq->len >= pq->max;
+}
-/* operations for single precedence queues */
-#define pktenq(pq, p) brcmu_pktq_penq(((struct pktq *)pq), 0, (p))
-#define pktenq_head(pq, p)\
- brcmu_pktq_penq_head(((struct pktq *)pq), 0, (p))
-#define pktdeq(pq) brcmu_pktq_pdeq(((struct pktq *)pq), 0)
-#define pktdeq_tail(pq) brcmu_pktq_pdeq_tail(((struct pktq *)pq), 0)
-#define pktqinit(pq, len) brcmu_pktq_init(((struct pktq *)pq), 1, len)
+static inline bool pktq_empty(struct pktq *pq)
+{
+ return pq->len == 0;
+}
extern void brcmu_pktq_init(struct pktq *pq, int num_prec, int max_len);
/* prec_out may be NULL if caller is not interested in return value */
@@ -182,66 +242,6 @@ extern int brcmu_iovar_lencheck(const struct brcmu_iovar *table, void *arg,
#define IOVT_INT32 6 /* int 32 bits */
#define IOVT_UINT32 7 /* unsigned int 32 bits */
#define IOVT_BUFFER 8 /* buffer is size-checked as per minlen */
-#define BCM_IOVT_VALID(type) (((unsigned int)(type)) <= IOVT_BUFFER)
-
-/* ** driver/apps-shared section ** */
-
-#define BCME_STRLEN 64 /* Max string length for BCM errors */
-
-#define ABS(a) (((a) < 0) ? -(a) : (a))
-
-#define CEIL(x, y) (((x) + ((y)-1)) / (y))
-#define ISPOWEROF2(x) ((((x)-1)&(x)) == 0)
-
-/* map physical to virtual I/O */
-#define REG_MAP(pa, size) ioremap_nocache((unsigned long)(pa), \
- (unsigned long)(size))
-
-/* the largest reasonable packet buffer driver uses for ethernet MTU in bytes */
-#define PKTBUFSZ 2048
-
-#define OSL_SYSUPTIME() ((u32)jiffies * (1000 / HZ))
-
-#ifndef setbit
-#ifndef NBBY /* the BSD family defines NBBY */
-#define NBBY 8 /* 8 bits per byte */
-#endif /* #ifndef NBBY */
-#define setbit(a, i) (((u8 *)a)[(i)/NBBY] |= 1<<((i)%NBBY))
-#define clrbit(a, i) (((u8 *)a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
-#define isset(a, i) (((const u8 *)a)[(i)/NBBY] & (1<<((i)%NBBY)))
-#define isclr(a, i) ((((const u8 *)a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
-#endif /* setbit */
-
-#define NBITS(type) (sizeof(type) * 8)
-#define NBITVAL(nbits) (1 << (nbits))
-#define MAXBITVAL(nbits) ((1 << (nbits)) - 1)
-#define NBITMASK(nbits) MAXBITVAL(nbits)
-#define MAXNBVAL(nbyte) MAXBITVAL((nbyte) * 8)
-
-/* basic mux operation - can be optimized on several architectures */
-#define MUX(pred, true, false) ((pred) ? (true) : (false))
-
-/* modulo inc/dec - assumes x E [0, bound - 1] */
-#define MODDEC(x, bound) MUX((x) == 0, (bound) - 1, (x) - 1)
-#define MODINC(x, bound) MUX((x) == (bound) - 1, 0, (x) + 1)
-
-/* modulo inc/dec, bound = 2^k */
-#define MODDEC_POW2(x, bound) (((x) - 1) & ((bound) - 1))
-#define MODINC_POW2(x, bound) (((x) + 1) & ((bound) - 1))
-
-/* modulo add/sub - assumes x, y E [0, bound - 1] */
-#define MODADD(x, y, bound) \
- MUX((x) + (y) >= (bound), (x) + (y) - (bound), (x) + (y))
-#define MODSUB(x, y, bound) \
- MUX(((int)(x)) - ((int)(y)) < 0, (x) - (y) + (bound), (x) - (y))
-
-/* module add/sub, bound = 2^k */
-#define MODADD_POW2(x, y, bound) (((x) + (y)) & ((bound) - 1))
-#define MODSUB_POW2(x, y, bound) (((x) - (y)) & ((bound) - 1))
-
-/* crc defines */
-#define CRC16_INIT_VALUE 0xffff /* Initial CRC16 checksum value */
-#define CRC16_GOOD_VALUE 0xf0b8 /* Good final CRC16 checksum value */
/* brcmu_format_flags() bit description structure */
struct brcmu_bit_desc {
@@ -256,9 +256,6 @@ struct brcmu_tlv {
u8 data[1];
};
-/* 18-bytes of Ethernet address buffer length */
-#define ETHER_ADDR_STR_LEN 18
-
/* externs */
/* format/print */
#if defined(BCMDBG)
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
