Search Linux Wireless

Re: [PATCH 3/3] b43: LCN-PHY: load TX gain table on init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 2011-09-03 at 21:01 +0200, Rafał Miłecki wrote:
> Values and ops were taken from MMIO dump of wl. struct was copied from
> brcmsmac.
[]
> diff --git a/drivers/net/wireless/b43/tables_phy_lcn.c b/drivers/net/wireless/b43/tables_phy_lcn.c
[]
> +const struct b43_lcntab_tx_gain_tbl_entry
> +		b43_lcntab_tx_gain_tbl_2ghz_ext_pa_rev0[] = {

128 entries follow...

> +	{ 0x03, 0x00, 0x1f, 0x0, 0x48 },
[etc]
> +	{ 0x03, 0x00, 0x01, 0x0, 0x39 },
> +};

> +void b43_phy_lcn_load_tx_gain_tab(struct b43_wldev *dev,
> +			const struct b43_lcntab_tx_gain_tbl_entry *gain_table)

Are there multiple gain tables?

> +{
> +	u32 i;
> +	u32 val;
> +
> +	u16 pa_gain = 0x70;
> +	if (dev->dev->bus_sprom->boardflags_lo & B43_BFL_FEM)
> +		pa_gain = 0x10;
> +
> +	for (i = 0; i < 128; i++) {

Can this be a fixed table and ARRAY_SIZE?



--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux