On Mon, 2011-08-29 at 16:59 +0300, Ilya Ledvich wrote: > Hi, Hi Ilya, [...] > I load the wl12xx_sdio module and then set the interface up; no obvious > error > is seen. When I run any other command (e.g. interface down/up, iwlist scan). > I have "/wl1271: ERROR ELP wakeup timeout!/" error. Then the driver > tries to > recover the chip; this eventually leads to the > "/wl1271: ERROR sdio read failed (-110)/" error. The log file for > ifconfig wlan0 up - down - up sequence is attached. This looks like an SDIO power management problem. Do you have CONFIG_PM_RUNTIME enabled in your kernel? Can you send us your .config and the patch where you modified the board-cm-t35.c file? -- Cheers, Luca. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
