ADC calibrations cannot run on 5 GHz with fast clock enabled. They need to be disabled, otherwise they'll hang and IQ mismatch calibration will not be run either. Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx> Reported-by: Adrian Chadd <adrian@xxxxxxxxxxx> Cc: stable@xxxxxxxxxx --- drivers/net/wireless/ath/ath9k/ar9002_calib.c | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c index 2d4c091..2d394af 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c @@ -41,7 +41,8 @@ static bool ar9002_hw_is_cal_supported(struct ath_hw *ah, case ADC_DC_CAL: /* Run ADC Gain Cal for non-CCK & non 2GHz-HT20 only */ if (!IS_CHAN_B(chan) && - !(IS_CHAN_2GHZ(chan) && IS_CHAN_HT20(chan))) + !((IS_CHAN_2GHZ(chan) || IS_CHAN_A_FAST_CLOCK(ah, chan)) && + IS_CHAN_HT20(chan))) supported = true; break; } -- 1.7.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
