On Tue, Aug 23, 2011 at 3:33 AM, David Miller <davem@xxxxxxxxxxxxx> wrote: > From: "John W. Linville" <linville@xxxxxxxxxxxxx> > Date: Mon, 22 Aug 2011 15:01:37 -0400 > >> This is a batch of fixes intended for 3.1. Included is rewrite of an >> earlier iwlagn fix that was revealed to be flawed (bad pointer access >> during module unload), a fix for a memory leak, and a trio of rt2x00 >> fixes with detailed changelogs. These have all been in linux-next >> for the last week with no reported complaints. >> >> Please let me know if there are problems! > > Pulled, thanks John. I'm using the rt2800usb module for the Buffalo WLI-UC-GNM using ad-hoc mode. T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0411 ProdID=01a2 Rev= 1.01 S: Manufacturer=Ralink S: Product=802.11 n WLAN It works ok, but after idling for a while, it does not response, and module needs to unloaded and modprobe again to make it work. The same mac80211 and cfg80211 works for iwlagn and no problem with idling timeout. Is there any parameter to control the rt2800usb to make turn off power saving? I've tried "iwconfig lwan0 power timeout 0 power off" but no effect. Linux 3.1.0-rc3 with commit caca9510ff4e5d842c0589110243d60927836222. Thanks, Jeff. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
