The Walsh bit is disabled for regulatory consideration.
FCC limit for walsh enable is lower than that for walsh disable. So
disabling walsh bit will not limit tx power/affect tx power even in
cases where we are not FCC limited (most client cards). If the tx
power is not FCC limited, then enabling/disabling walsh bit will
not affect Avg. EVM/overall performance in any visible manner.
Cc: Felix Fietkau <nbd@xxxxxxxxxxx>
Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
---
.../net/wireless/ath/ath9k/ar9003_2p2_initvals.h | 2 +-
drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
index a0aadad..f2c6f23 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -636,7 +636,7 @@ static const u32 ar9300_2p2_baseband_postamble[][5] = {
{0x00009e44, 0x02321e27, 0x02321e27, 0x02291e27, 0x02291e27},
{0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012},
{0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000},
- {0x0000a204, 0x000037c0, 0x000037c4, 0x000037c4, 0x000037c0},
+ {0x0000a204, 0x000036c0, 0x000036c4, 0x000036c4, 0x000036c0},
{0x0000a208, 0x00000104, 0x00000104, 0x00000004, 0x00000004},
{0x0000a22c, 0x01026a2f, 0x01026a2f, 0x01026a2f, 0x01026a2f},
{0x0000a230, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b},
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index a0aaa68..dbe0b58 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -482,7 +482,7 @@ static void ar9003_hw_set_channel_regs(struct ath_hw *ah,
(REG_READ(ah, AR_PHY_GEN_CTRL) & AR_PHY_GC_ENABLE_DAC_FIFO);
/* Enable 11n HT, 20 MHz */
- phymode = AR_PHY_GC_HT_EN | AR_PHY_GC_SINGLE_HT_LTF1 | AR_PHY_GC_WALSH |
+ phymode = AR_PHY_GC_HT_EN | AR_PHY_GC_SINGLE_HT_LTF1 |
AR_PHY_GC_SHORT_GI_40 | enableDacFifo;
/* Configure baseband for dynamic 20/40 operation */
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
