Search Linux Wireless

Problem bringing up wlan0 interface up with mainline wl1271 drivers on Panda Board with 2.6.39 Kernel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I am using Panda Board with 2.6.39 Kernel

when ever i insert the driver , error comes out "wl1271: ERROR could not get nvs
file: -2"

as you can see from the logs...

/ # insmod file-sys-2.6.39/lib/modules/2.6.39/kernel/net/wireless/cfg80211.ko 
[   18.853088] cfg80211: Calling CRDA to update world regulatory domain
/ # insmod file-sys-2.6.39/lib/modules/2.6.39/kernel/net/mac80211/mac80211.ko 
/ # insmod file-sys-2.6.39/lib/modules/2.6.39/kernel/drivers/net/wireless/wl12xx
/wl12xx.ko 
/ # insmod file-sys-2.6.39/lib/modules/2.6.39/kernel/drivers/net/wireless/wl12xx
/wl12xx_sdio.ko 
[  112.121643] wl1271: ERROR could not get nvs file: -2
[  112.137634] wl1271_sdio mmc1:0001:2: wlan0: Features changed: 0x00004800 ->
0x00004000
[  112.148712] wl1271: loaded
[  112.151550] wl1271: initialized
/ # ifconfig -a
lo        Link encap:Local Loopback  
          LOOPBACK  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:00:00:00:00:00  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

/ #  ifconfig wlan0 hw ether 00:22:33:44:55:66
/ #  ifconfig wlan0 hw ether 00:22:33:44:55:D1
/ # ifconfig -a
lo        Link encap:Local Loopback  
          LOOPBACK  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 00:22:33:44:55:D1  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

/ # ifconfig wlan0 down
/ # ifconfig wlan0 up
[  427.125793] wl1271: ERROR could not get firmware: -2
[  488.123046] wl1271: ERROR could not get firmware: -2


--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux