Signed-off-by: Rajkumar Manoharan <rmanohar@xxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 128 ++++++++++++++++++++++++
drivers/net/wireless/ath/ath9k/eeprom.h | 2 +
drivers/net/wireless/ath/ath9k/hw.h | 6 +
3 files changed, 136 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index d109c25..e216712 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3418,6 +3418,133 @@ static bool ath9k_hw_ar9300_fill_eeprom(struct ath_hw *ah)
return true;
}
+#if defined(CONFIG_ATH9K_DEBUGFS) || defined(CONFIG_ATH9K_HTC_DEBUGFS)
+static u32 ar9003_dump_modal_eeprom(char *buf, u32 len, u32 size,
+ struct ar9300_modal_eep_header *modal_hdr)
+{
+ PR_EEP("Chain0 Ant. Control", le16_to_cpu(modal_hdr->antCtrlChain[0]));
+ PR_EEP("Chain1 Ant. Control", le16_to_cpu(modal_hdr->antCtrlChain[1]));
+ PR_EEP("Chain2 Ant. Control", le16_to_cpu(modal_hdr->antCtrlChain[2]));
+ PR_EEP("Ant. Common Control", le32_to_cpu(modal_hdr->antCtrlCommon));
+ PR_EEP("Ant. Common Control2", le32_to_cpu(modal_hdr->antCtrlCommon2));
+ PR_EEP("Ant. Gain", modal_hdr->antennaGain);
+ PR_EEP("Switch Settle", modal_hdr->switchSettling);
+ PR_EEP("Chain0 xatten1DB", modal_hdr->xatten1DB[0]);
+ PR_EEP("Chain1 xatten1DB", modal_hdr->xatten1DB[1]);
+ PR_EEP("Chain2 xatten1DB", modal_hdr->xatten1DB[2]);
+ PR_EEP("Chain0 xatten1Margin", modal_hdr->xatten1Margin[0]);
+ PR_EEP("Chain1 xatten1Margin", modal_hdr->xatten1Margin[1]);
+ PR_EEP("Chain2 xatten1Margin", modal_hdr->xatten1Margin[2]);
+ PR_EEP("Temp Slope", modal_hdr->tempSlope);
+ PR_EEP("Volt Slope", modal_hdr->voltSlope);
+ PR_EEP("spur Channels0", modal_hdr->spurChans[0]);
+ PR_EEP("spur Channels1", modal_hdr->spurChans[1]);
+ PR_EEP("spur Channels2", modal_hdr->spurChans[2]);
+ PR_EEP("spur Channels3", modal_hdr->spurChans[3]);
+ PR_EEP("spur Channels4", modal_hdr->spurChans[4]);
+ PR_EEP("Chain0 NF Threshold", modal_hdr->noiseFloorThreshCh[0]);
+ PR_EEP("Chain1 NF Threshold", modal_hdr->noiseFloorThreshCh[1]);
+ PR_EEP("Chain2 NF Threshold", modal_hdr->noiseFloorThreshCh[2]);
+ PR_EEP("xPA Bias Level", modal_hdr->xpaBiasLvl);
+ PR_EEP("txFrameToDataStart", modal_hdr->txFrameToDataStart);
+ PR_EEP("txFrameToPaOn", modal_hdr->txFrameToPaOn);
+ PR_EEP("txFrameToXpaOn", modal_hdr->txFrameToXpaOn);
+ PR_EEP("txClip", modal_hdr->txClip);
+ PR_EEP("ADC Desired size", modal_hdr->adcDesiredSize);
+ PR_EEP("Chain0 ob", modal_hdr->ob[0]);
+ PR_EEP("Chain1 ob", modal_hdr->ob[1]);
+ PR_EEP("Chain2 ob", modal_hdr->ob[2]);
+
+ PR_EEP("Chain0 db_stage2", modal_hdr->db_stage2[0]);
+ PR_EEP("Chain1 db_stage2", modal_hdr->db_stage2[1]);
+ PR_EEP("Chain2 db_stage2", modal_hdr->db_stage2[2]);
+ PR_EEP("Chain0 db_stage3", modal_hdr->db_stage3[0]);
+ PR_EEP("Chain1 db_stage3", modal_hdr->db_stage3[1]);
+ PR_EEP("Chain2 db_stage3", modal_hdr->db_stage3[2]);
+ PR_EEP("Chain0 db_stage4", modal_hdr->db_stage4[0]);
+ PR_EEP("Chain1 db_stage4", modal_hdr->db_stage4[1]);
+ PR_EEP("Chain2 db_stage4", modal_hdr->db_stage4[2]);
+
+ return len;
+}
+
+static u32 ath9k_hw_ar9003_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr,
+ u8 *buf, u32 len, u32 size)
+{
+ struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep;
+ struct ar9300_base_eep_hdr *pBase;
+
+ if (!dump_base_hdr) {
+ len += snprintf(buf + len, size - len,
+ "%20s :\n", "2GHz modal Header");
+ len += ar9003_dump_modal_eeprom(buf, len, size,
+ &eep->modalHeader2G);
+ len += snprintf(buf + len, size - len,
+ "%20s :\n", "5GHz modal Header");
+ len += ar9003_dump_modal_eeprom(buf, len, size,
+ &eep->modalHeader5G);
+ goto out;
+ }
+
+ pBase = &eep->baseEepHeader;
+
+ PR_EEP("EEPROM Version", ah->eeprom.ar9300_eep.eepromVersion);
+ PR_EEP("RegDomain1", le16_to_cpu(pBase->regDmn[0]));
+ PR_EEP("RegDomain2", le16_to_cpu(pBase->regDmn[1]));
+ PR_EEP("TX Mask", (pBase->txrxMask >> 4));
+ PR_EEP("RX Mask", (pBase->txrxMask & 0x0f));
+ PR_EEP("Allow 5GHz", !!(pBase->opCapFlags.opFlags &
+ AR5416_OPFLAGS_11A));
+ PR_EEP("Allow 2GHz", !!(pBase->opCapFlags.opFlags &
+ AR5416_OPFLAGS_11G));
+ PR_EEP("Disable 2GHz HT20", !!(pBase->opCapFlags.opFlags &
+ AR5416_OPFLAGS_N_2G_HT20));
+ PR_EEP("Disable 2GHz HT40", !!(pBase->opCapFlags.opFlags &
+ AR5416_OPFLAGS_N_2G_HT40));
+ PR_EEP("Disable 5Ghz HT20", !!(pBase->opCapFlags.opFlags &
+ AR5416_OPFLAGS_N_5G_HT20));
+ PR_EEP("Disable 5Ghz HT40", !!(pBase->opCapFlags.opFlags &
+ AR5416_OPFLAGS_N_5G_HT40));
+ PR_EEP("Big Endian", !!(pBase->opCapFlags.eepMisc & 0x01));
+ PR_EEP("RF Silent", pBase->rfSilent);
+ PR_EEP("BT option", pBase->blueToothOptions);
+ PR_EEP("Device Cap", pBase->deviceCap);
+ PR_EEP("Device Type", pBase->deviceType);
+ PR_EEP("Power Table Offset", pBase->pwrTableOffset);
+ PR_EEP("Tuning Caps1", pBase->params_for_tuning_caps[0]);
+ PR_EEP("Tuning Caps2", pBase->params_for_tuning_caps[1]);
+ PR_EEP("Enable Tx Temp Comp", !!(pBase->featureEnable & BIT(0)));
+ PR_EEP("Enable Tx Volt Comp", !!(pBase->featureEnable & BIT(1)));
+ PR_EEP("Enable fast clock", !!(pBase->featureEnable & BIT(2)));
+ PR_EEP("Enable doubling", !!(pBase->featureEnable & BIT(3)));
+ PR_EEP("Internal regulator", !!(pBase->featureEnable & BIT(4)));
+ PR_EEP("Enable Paprd", !!(pBase->featureEnable & BIT(5)));
+ PR_EEP("Driver Strength", !!(pBase->miscConfiguration & BIT(0)));
+ PR_EEP("Chain mask Reduce", (pBase->miscConfiguration >> 0x3) & 0x1);
+ PR_EEP("Write enable Gpio", pBase->eepromWriteEnableGpio);
+ PR_EEP("WLAN Disable Gpio", pBase->wlanDisableGpio);
+ PR_EEP("WLAN LED Gpio", pBase->wlanLedGpio);
+ PR_EEP("Rx Band Select Gpio", pBase->rxBandSelectGpio);
+ PR_EEP("Tx Gain", pBase->txrxgain >> 4);
+ PR_EEP("Rx Gain", pBase->txrxgain & 0xf);
+ PR_EEP("SW Reg", le32_to_cpu(pBase->swreg));
+
+ len += snprintf(buf + len, size - len, "%20s : %pM\n", "MacAddress",
+ ah->eeprom.ar9300_eep.macAddr);
+out:
+ if (len > size)
+ len = size;
+
+ return len;
+}
+#else
+static u32 ath9k_hw_ar9003_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr,
+ u8 *buf, u32 len, u32 size)
+{
+ return 0;
+}
+#endif
+
/* XXX: review hardware docs */
static int ath9k_hw_ar9300_get_eeprom_ver(struct ath_hw *ah)
{
@@ -5015,6 +5142,7 @@ const struct eeprom_ops eep_ar9300_ops = {
.check_eeprom = ath9k_hw_ar9300_check_eeprom,
.get_eeprom = ath9k_hw_ar9300_get_eeprom,
.fill_eeprom = ath9k_hw_ar9300_fill_eeprom,
+ .dump_eeprom = ath9k_hw_ar9003_dump_eeprom,
.get_eeprom_ver = ath9k_hw_ar9300_get_eeprom_ver,
.get_eeprom_rev = ath9k_hw_ar9300_get_eeprom_rev,
.set_board_values = ath9k_hw_ar9300_set_board_values,
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index de99c0d..a3c7d0c2 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -649,6 +649,8 @@ struct eeprom_ops {
int (*check_eeprom)(struct ath_hw *hw);
u32 (*get_eeprom)(struct ath_hw *hw, enum eeprom_param param);
bool (*fill_eeprom)(struct ath_hw *hw);
+ u32 (*dump_eeprom)(struct ath_hw *hw, bool dump_base_hdr, u8 *buf,
+ u32 len, u32 size);
int (*get_eeprom_ver)(struct ath_hw *hw);
int (*get_eeprom_rev)(struct ath_hw *hw);
void (*set_board_values)(struct ath_hw *hw, struct ath9k_channel *chan);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index 6acd0f9..6f3abcd 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -93,6 +93,12 @@
(_ah)->reg_ops.write_flush((_ah)); \
} while (0)
+#define PR_EEP(_s, _val) \
+ do { \
+ len += snprintf(buf + len, size - len, "%20s : %10d\n", \
+ _s, (_val)); \
+ } while (0)
+
#define SM(_v, _f) (((_v) << _f##_S) & _f)
#define MS(_v, _f) (((_v) & _f) >> _f##_S)
#define REG_RMW_FIELD(_a, _r, _f, _v) \
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
